Stredový sústruh

WEILER Commodor B - Teilüberholt

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly Hnedpfsthd Shjx Agtjg - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: použitý, Surface grinding machine BLOHM Type HFS 6 Serial No.: 10493 Year of manufacture: 1973 Electro-magnetic chuck 600 x 300 mm Grinding length 600 mm Grinding width 400 mm Table longitudinal travel max. 650 mm Cross travel 350 mm Distance spindle center to table surface max. 600 mm Distance spindle center to magnetic chuck max. 517 mm Table clamping area 1020 x 300 mm Grinding wheel diameter 300 mm Hsdpfed Hbafex Agtjng Grinding wheel width 50 mm Grinding wheel bore 76 mm Table longitudinal feed 2–30 m/min, stepless Table cross feed 2–65 mm, stepless, electric Rapid cross traverse 3 m/min Vertical feed 0.001–0.020 mm per infeed pulse Rapid vertical traverse 0.250 m/min Grinding wheel speed 1400 / 2800 rpm Hydraulic pump motor power 2.2 kW Grinding spindle motor power 5 / 6 kW Power supply 380 Volt, 50 Hz Total connected load 11 kW - Automatic depth infeed - Hydraulic longitudinal table movement - Grinding wheel dressing device on spindle head - Electromagnetic chuck, 83 mm built-in height - Separate coolant system with magnetic filter in filter housing - Grinding spindle circulation lubrication - Free-standing control cabinet (800 x 500 mm) - Swiveling control panel - Operation manual and spare parts catalogue Required floor space (L x W x H): 3000 x 2200 x 2100 mm Weight, surface grinding machine: 3,000 kg Weight, control cabinet: 200 kg Good condition

Stav: ako nová (výstavný stroj), Rok výroby: 2019, Funkcionalita: plne funkčný, sústružnícky priemer nad priečnym suportom: 415 mm, dĺžka sústruženia: 850 mm, sústružnícky priemer: 390 mm, otvor vretena: 105 mm, maximálna rýchlosť vretena: 2 000 ot./min, pojazdová vzdialenosť osi X: 225 mm, zdvih osi Z: 950 mm, rýchloposuv os X: 15 m/min, rýchloposuv osi Z: 15 m/min, celková výška: 1 980 mm, celková dĺžka: 4 600 mm, celková šírka: 1 900 mm, priemer pinoly: 100 mm, ťah perom: 120 mm, celková hmotnosť: 7 000 kg, prechod tyče: 90 mm, vonkajší priemer skľučovadla: 300 mm, výrobca ovládačov: Siemens, model regulátora: 828D + Shopturn, Výbava: dokumentácia / manuál, max. turning diameter: 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15 min): 25/33 kW Hodpfx Aefk Et Asgteng bar capacity: 90 mm spindle nose: A2-11 Including accessories such as: SAUTER 12-station turret VDI-40 Trifix mount for driven tools C-axis with spindle clamping and stabilization wide and robust flat guides 45° slant bed for optimal chip removal hinged belt chip conveyor with chip bin 3-jaw Kitagawa power chuck ø 300 mm manual swing-away tool measurement hydraulic tailstock manually adjustable with programmable quill coolant system with high-performance pump (4 bar) Rittal filter fan at the electrical cabinet

Stav: použitý, Rok výroby: 1956, číslo stroja/vozidla: 17179, Ťažká sústruh, sústruh, sústružnícka lavica, univerzálny hrotový sústruh - Výrobca: Meuser, univerzálny hrotový sústruh typ M3A - Dĺžka sústruženia: 1400 mm - Priemer sústruženia nad ložom: 550 mm Hjdsh Uuzyopfx Agtjng - Priemer sústruženia bez mostíka: 800 mm - Priemer sústruženia nad suportom: 300 mm - Priemer prievrtu vretena: 58 mm - Rozsah otáčok vretena: 15 - 810 ot/min - Trojčeľusťové skľučovadlo: Röhm Ø 250 mm - Upínacia doska: 500 mm - Príslušenstvo: vrátane držiaka nástrojov/nástrojov podľa fotografií - Kužeľ zadnej opierky: MK5 - Rozmery: 2770/1070/V1310 mm

Stav: dielensky repasované (použité), Univerzálna nástrojová frézka Značka: harich (DECKEL) Model: B (FP 2) plynulá regulácia zrekonštruovaná s CE geometrické prevzatie s protokolom o skúške so zárukou Príslušenstvo: - 3-osý digitálny odpočítavač FAGOR Innova 30i-M - Pevný alebo univerzálny stôl - Vertikálna frézovacia hlava SK 40 - Centrálne ručné mazanie - Zariadenie na chladenie - Návod na obsluhu CE a bezpečnostná výbava: - Nová elektroinštalácia stroja s rozvádzačom - Elektronicky monitorovaný kryt na vertikálnej frézovacej hlave - Ochranný kryt skľučovadla s elektrickým istením - Pohonný motor s brzdovou funkciou Hedpfx Aevfdatsgtjng - Ovládací pult s tlačidlom núdzového zastavenia, uvoľnením, spustením a zastavením, potenciometer pre reguláciu posuvu - Nová dokumentácia pre stroj a rozvádzač - Vyhlásenie o zhode CE

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEWLY Refurbished with Inspection Protocol for New Machine Tolerances Hsdpfsvrcqdox Agteng Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Supported thread types: metric, inch, module and diametral pitch threads >> Metric thread pitches: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake, switchable >> Motor power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction switching >> 200 mm three-jaw wedge bar chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops Optional: Covers for lead and feed screw About the Machine: Offered here is a Weiler Commodor lead and feed screw lathe in a geometrically overhauled condition. The guides are newly ground or scraped. Acceptance according to test protocol. 2K white gloss paintwork. The Multifix tool post and chuck are new. Safety: The lathe features a brake motor, electronic spindle protection, and two emergency stops—an absolutely as-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Stav: nový, Rok výroby: 2025, Cutting speed: 35 m/s Grinding height: 210 mm Workpiece length: / mm Machine weight approx. 210–260 kg Space requirement approx. 1100 x 760 x 860 mm The G115 Surface Grinder is a compact grinding machine designed for machining the periphery or face of the grinding wheel on horizontal or vertical surfaces of a workpiece. Using fixtures or profiled grinding wheels, inclined or contoured surfaces can also be machined. The machine is ideally suited for small businesses, maintenance workshops, home workshops, laboratories, training demonstrations, and more. TECHNICAL SPECIFICATIONS Maximum cutting depth: not greater than 0.03 mm Maximum linear speed of the grinding wheel: 35 m/s Table size: 152 × 304 mm Maximum grinding height: 210 mm Longitudinal travel of the worktable: 340 mm Cross travel of the worktable: 170 mm Worktable T-slot: 1–12 mm Grinding wheel outer diameter × bore × width: 180 × 32 × 13 mm Grinding head motor: 550 W / 220 V Vertical feed handwheel increment: 0.025 mm Cross feed handwheel increment: 0.02 mm Net weight / gross weight: 210 / 260 kg Machine dimensions: 930 × 780 × 730 mm Packing dimensions: 1100 × 760 × 860 mm The worktable can be moved forward and backward as well as left and right. The grinding head can be raised and lowered vertically. High rigidity throughout the machine. Smooth running grinding head. Compact design and low noise level. Hnjdovuuvkopfx Agtog Work enclosure available separately. The machine is lubricated with a manual oil pump. To lubricate, simply pull out the handle. If you require other special accessories to improve work efficiency, please contact customer service. (Special accessories must be purchased separately.) PRODUCT INFORMATION: From the proximal end of the main spindle, the radial runout of the taper bore axis is 0.01—0.02 mm at a distance of 100 mm.

Stav: použitý, Rok výroby: 1989, used, well-maintained GEIBEL+HOTZ surface grinding machine model FS 50 SA Hnedjwq Nc Nspfx Agtog Grinding area: 500 x 250 x 375 mm Vertical automatic feed Equipped with fine-pole electro-magnetic chuck Grinding wheel diameter: 300 x 50 x 76.2 mm With paper band filtration system, with manual wheel dresser on top Various grinding wheels and flanges included Weight: approx. 2,400 kg Space requirement: approx. 2,500 x 1,800 x Height 2,500 mm The machine is located at our facility in 71334 Waiblingen-Beinstein and can, of course, be viewed. Please contact us for more information.

Stav: použitý, Rok výroby: 2019, Ovládanie Fanuc F0-iTF + MG i Priemer sústruženia: 370 mm Dĺžka sústruženia: 712 mm Obežný priemer nad lôžkom: 651 mm Obežný priemer nad priečnym suportom: 461 mm Os X: 255 mm Os Z: 790 mm Otáčky: 5 000 ot./min Počet nástrojov: 12 ks Hodiny vretena: cca 8 953 h Hnsdex Ik Ubjpfx Agtog Podľa nášho názoru je stroj v dobrom použitom stave a je možné ho po dohode vidieť v chode. Technické vlastnosti a príslušenstvo: - Poháňané nástroje - Dopravník triesok - Zberač obrobkov - Chladiaca pumpa, 7 bar, 25 l/min - Automatické rameno na meranie nástroja Príslušenstvo, zobrazené nástroje a upínače patria k dodávke len v prípade, že je to uvedené v dodatočných informáciách. Zmeny a chyby v technických údajoch, ako aj predpredaj, vyhradené!

Stav: veľmi dobrý (použitý), Here we offer a used Datona Mobile Sandblasting Unit. Datona Mobile Sandblasting Unit DUO - 74 Litre, SKU DT-55212 Advantages and Disadvantages: - 2.5 m long hose for extended reach - Easy switching between blasting media thanks to the mixing valve - Using soda will not damage the workpiece surface Description: This mobile sandblasting device is used for removing paint and rust. Thanks to the two tanks, you can select between two different blasting media. The mobile sandblasting unit operates at a pressure of 4 to 8 bar and requires an air compressor with a minimum intake capacity of 350 l/min. Double Tank: If you don't achieve the desired result with soda or calcium carbonate blasting, simply try a different blasting medium. For increased efficiency, it is also possible to use both blasting media simultaneously. With this sandblasting unit, you get a practical machine for your workshop. The special mixing valve allows you to gently and easily remove paint from steel, stainless steel, chrome, aluminum, or polyester using soda. A major advantage of blasting with fine soda is that the surface of the object is not damaged. There is no need to remove rubber seals, chrome parts, or glass elements. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop and on-site. Note: One tank is solely suitable for soda and calcium carbonate! ✓ Duo sandblasting unit ✓ 74 litre tank capacity ✓ Air consumption approximately 350 l/min Technical data: Hnodpeqcuvwjfx Agtjg SKU: DT-55212 Weight: 33 kg Suitable blasting media: - Aluminium silicate - Dato-Blast calcium carbonate - Soda Blasting cabin connection: 1/4" Max. pressure: 2 - 6 bar Minimum air consumption: 350 l/min Minimum compressor tank capacity: 100 litres Type: DT-55212 Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in technical data/specifications!) Further questions? We are happy to answer your call.