Sústruh vrátane príslušenstva

Weiler Condor

Stav: dobrý (použitý), Leit & Zugspindel sústruh WEILER CONDOR - Originálny lak - Výška hrotu 165 mm - Priemer sústruženia nad lôžkom 330 mm - Priemer sústruženia nad suportom 170 mm - Vzdialenosť medzi hrotmi 800 mm - Otáčky vretena 24 - 2800 ot./min - Automatické pozdĺžne / priečne posuvy - Priechodnosť vretena 38 mm Casdpfxsx A D Ubj Afwea - Koník MK 3 - Príslušenstvo na upínacie púzdra + 17x upínacích púzdier - Trojčeľusťové skľučovadlo - Multifix s vložkami - Elektrická ochrana skľučovadla - Zadná ochrana proti trieskam - Pracovné osvetlenie - Rôzne príslušenstvo - Dokumentácia Rozmery: DxŠxV 1,8x0,9x1,6 metra / Hmotnosť 800 kg Vyhradzujeme si právo na chyby a preklepy

Stav: dobrý (použitý), Rok výroby: 1996, Weiler lathe Type: Condor B Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Caodpfx Afevbwd Rjwsa Swing over cross slide: 185 mm Spindle nose: DIN 55027 size 5 Spindle bore: 40 mm Main spindle taper: MT 5 Connected load: 3 kW Speed range: 22–2800 rpm Tailstock taper: MT 3 Weight: 1040 kg 3-jaw chuck 4-jaw chuck Multifix B quick-change toolpost Live center

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, Weiler center lathe model Condor B, lead and feed screw lathe with new K&C 3-axis digital readout, CE compliant! Technical data: - Machine No.: 2442, Year of manufacture: 1997 - Center height: 165 mm - Center distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Camlock spindle nose DIN 55027, size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev Cajdpfx Aexcuazjfwea - Thread types: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Electrically engageable spindle brake - Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Equipment & accessories: - New K&C 3-axis digital readout with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tooling program for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal - 1 piece NEW 160 mm 3-jaw chuck with 2 sets of jaws - 1 piece 200 mm 4-jaw chuck with 1 set of jaws - NEW collet chuck and NEW collet set from 3 to 25 mm in 1 mm increments - Multifix size B with 2 tool holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Safety equipment: electronic spindle guard, 2 emergency stop buttons, change gear box with end switch, spindle brake About the machine: For sale is a Weiler Condor in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our location.

Stav: použitý, L + Z sústruh WEILER Typ Condor 81 A Stroj. č. 36553 Rok výroby cca 1985 Vzdialenosť medzi hrotmi: 750 mm Točný priemer nad lôžkom: 330 mm Výška hrotov nad lôžkom: 165 mm Točný priemer nad suportom: 180 mm Výška hrotov nad suportom: 90 mm Vretenový otvor: 40 mm Upínanie skľučovadla: krátky kužeľ DIN 55027 veľ. 5 Kužeľ v koníku: MK 3 Výsun pinoly: 110 mm Otáčky vretena: 45 - 2800 ot./min, 16 stupňov Výkon motora: 3 kW Pripojenie na sieť: 400 V, 50 Hz Codpek S Ht Ajfx Afwsaa - Otáčky vretena nastaviteľné v 16 prevodových stupňoch - 3-čeľusťové skľučovadlo Ø 160 mm RÖHM s vŕtacími a sústružníckymi čeľusťami - Rýchlovýmenný držiak nástrojov Multifix veľkosť B s 3 vložkami - Automatický pozdĺžny a čelný posuv - Elektromechanická brzda vretena - Núdzové vypnutie - Nádrž na chladiacu kvapalinu s čerpadlom v podstavci stroja, bez prívodu do pracovného priestoru - Sklápací kryt skľučovadla - Ochrana proti striekaniu - 1 ks otočný hrot - Elektrické schémy a návod na obsluhu Rozmery (D x Š x V): 1850 x 950 x 1400 mm Hmotnosť: 1100 kg Dobrý stav

Stav: dobrý (použitý), Funkcionalita: plne funkčný, used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Year of manufacture: approx. 1987 Centre distance: 750 mm Swing diameter over bed: Ø 330 mm Centre height over bed: 165 mm Swing diameter over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Caodpfx Aovadqzefwea Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor, stages 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Features & Accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick-change collet chuck and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake, selectable - 2x Emergency stop - Electric chuck key detection (via sleeve with pushbutton) - Coolant tank with pump in machine base - Foldable chuck guard - Splash guard - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very operator-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Subject to prior sale.

Stav: pripravené na použitie (použité), Dĺžka sústruženia: 800 mm Priemer sústruženia nad lôžkom: 330 mm Priemer sústruženia nad suportom: 170 mm Rozsah otáčok: 24 - 2800 ot./min Priechod vretena: 38,0 mm Výška hrotu: 165 mm Celkový príkon: 3,5 kW Hmotnosť stroja cca 850 kg Priestorová náročnosť cca 1850 x 800 x 1700 mm Zo strednej odbornej školy – vo veľmi dobrom stave (!!) Obzvlášť vhodný pre stredne veľké presné sústružnícke diely. Výbava: - robustný sústruh s vodicou a ťahovou skrutkou - 3-osý digitálny odpočet HEIDENHAIN „VRZ 770“ Caodpfxsxmakto Afwoa - trojčeľusťové skľučovadlo RÖHM Ø 160 mm - sklápací kryt skľučovadla - kľúč na skľučovadlo - rýchloupínací držiak TRIPAN s 3 vložkami - posuvný koník - otočná strojová lampa - ovládací panel, vpredu vľavo - automatické posuvy pre pozdĺžny a priečny suport - strojový podstavec so dvierkami (úložný priestor) - zadný ochranný kryt proti trieskam - 1x prázdna náradiová skriňa - núdzové vypínanie - návod na obsluhu

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm Caedswrmuxjpfx Afwsa >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Codpfxsw Nw Dqs Afweaa Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: >> Year of manufacture: 1983 Machine No. 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg Csdpfx Aswb Supsfwoaa >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW 3-axis digital readout from K&C, 12-month manufacturer warranty with instruction manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, increment 1 mm >> Multifix size B with 3 tool holders >> Electronic spindle protection >> Rear splash guard >> Coolant system >> Machine feet About the Machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new 3-axis digital readout from K&C makes operation easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1,100 kg Codpfx Afoxu Hlajwsaa >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety features: >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.