Príslušenstvo k sústruhu

Weiler Primus

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm - Rozsah otáčok: 40-3000 ot./min - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou - Štvorklauzové skľučovadlo Kjdoxw H Dbjpfx Afdsdw - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená.

Stav: použitý, Rok výroby: 2007, Spindle speed: 6,000 rpm Tool holder: BT50 Number of tool changer positions: 121 Control: FANUC 31iMA Horizontal machining center | TOYODA - FH630SX Kdedpfx Afet I Ec Dedew Equipped with through-spindle coolant (IKZ) and chip conveyor. Additional features: + NC rotary table 360,000 x 0.001° The machine is in well-maintained condition. Technical specifications of the machine will follow shortly. ----- #Tags: FH 630SX | FH630 | FH-630 | FH 630 SX

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus lead and feed screw lathe with 2-axis Heidenhain digital readout from training workshop! Technical Data: - Year of manufacture: approx. 1985 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose KK4 DIN 55027 - Tailstock: Morse taper 2 (MK 2) - Feeds: 0.03 to 0.15 mm/rev - Threads possible: Metric, Imperial, Module, and Diametral-Pitch Kdedpeu Afqljfx Afdow - Metric pitch range: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: - 2-axis digital readout by Heidenhain - 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws - New collet chuck with new collets from 3 mm to 25 mm, in 1 mm increments - Multifix size A with 3 tool holders - Rear splash guard About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was previously used in a training workshop. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-quality surfaces. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard - Splash guard - Machine lamp - Electrical diagram Kjdpfxjrtd Uwj Afdodw - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: dobrý (použitý), Funkcionalita: plne funkčný, otvor vretena: 36 mm, výška stredu: 155 mm, dĺžka sústruženia: 800 mm, maximálna rýchlosť vretena: 2 000 ot./min, otáčky vretena (min.): 25 ot./min, Použitý univerzální soustruh Weiler Condor, č. 7939, Výška hrotu: 155 mm, Vzdálenost mezi hroty: 800 mm, Otáčky vřetena: 12–2800 ot/min, průchozí otvor vřetena: 36 mm Příslušenství: 1x tříčelisťové sklíčidlo RÖHM Ø 160 mm, základní tělo Multifix vel. B se 2 nástavci, rychloupínací vrtací hlava, Kdsdpfjv R Tdxsx Afdjw otáčivý střed a chladicí zařízení. Stroj se nachází v našem skladu na adrese 71334 Waiblingen-Beinstein a je ihned k dispozici.

Stav: pripravené na použitie (použité), Rok výroby: 1989, Funkcionalita: plne funkčný, Na predaj je sústruh značky Weiler, typ Primus LZ-GS. Stroj je vo veľmi dobrom stave. Technické údaje: Rok výroby: 1989 Číslo stroja: 4443 Prevádzkové napätie: 380 V Výška hrotu: 120 mm Vzdialenosť medzi hrotmi: 430 mm Otáčky: 60 – 3000 ot/min v 18 prevodových stupňoch Priechod vretena: 23 mm Vreteno s kužeľom podľa DIN 55027 Konzola: MK 2 Posuvy: 0,03 až 0,15 mm/ot. Možné závity: metrické, palcové, modulové a s diametrálnym stúpaním Metrické závity: od 0,25 do 2,5 mm Rozmery: dĺžka 1,2 m, výška 1,3 m, hĺbka 0,65 m Ceny bez DPH. Obhliadka je možná po dohovore. Kontaktujte nás, náš tím Vám rád pomôže. Možný výkup alebo výmena! Nákup a predaj strojov NÁKUP / PREDAJ VÝROBNÝCH A KOVOOBRÁBACÍCH STROJOV A ĎALŠIEHO. Kedeihig Iepfx Afdodw Potrebujete kvalitný a cenovo dostupný stroj na obrábanie kovov do výroby? Alebo chcete svoj stroj predať? Viac informácií alebo kontaktné údaje nájdete na našej webovej stránke.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Ksdpfx Afju Aftgjdodw Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: pripravené na použitie (použité), Rok výroby: 2008, prevádzkové hodiny: 9 965 h, - POUŽITÉ - 3-OSOVÉ VERTIKÁLNE OBRÁBACIE CENTRUM S ROTO-PALETTOU POJEZD V OSI X: 560 mm POJEZD V OSI Y: 400 mm POJEZD V OSI Z: 570 mm VZDIALENOSŤ ČELO VRETENA-STÔL: 210 - 780 mm RÝCHLOPOSUVY X-Y-Z: 40 - 40 - 32 m/min VRETENO: 80-10 000 ot./min; 15-18,5 kW; ISO 40 - BT Kdsdpfx Aeq Nqkxsfdsw PALETTA: 2 ks; 712 x 475 mm MAX. PRÍPUSTNÉ ZAŤAŽENIE: 300 x 2 kg CHLADENIE VYSOKÝM TLAKOM: 15 bar ZÁSOBNÍK NÁSTROJOV: REŤAZOVÝ; 32 POZÍCIÍ MAX. PRIEMER NÁSTROJA: 90 (150) mm MAX. DĹŽKA NÁSTROJA: 300 mm MAX. HMOTNOSŤ NÁSTROJA: 8 kg RIADIACA JEDNOTKA: FANUC 21i-MB HMOTNOSŤ: 7600 kg CELKOVÉ ROZMERY: 3010 x 3450 x 3145 mm

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm Ksdovtp Edopfx Afdodw >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe in very good original condition!!! Technical data: - Year of manufacture: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Speed range: 60 - 3,000 rpm in 18 gearbox steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: MT 2 - Feed range: 0.03 to 0.15 mm/rev - Thread types: Metric, Whitworth, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 2.5 mm - Switchable spindle brake - Weight: approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and equipment: - Brand new collet chuck set, new collets from 3 to 25 mm - 1 three-jaw chuck with 2 sets of jaws - Multifix size A toolpost with 2 toolholders About the machine: Kdodpfx Afswkh Abodew For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The bedways are in very good condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: dobrý (použitý), Rok výroby: 2010, Sústruh s plochými ložami značky JET, typ GHB-1330, rok výroby 2010, vybavený 3-osým digitálnym odpočtom, trojčeľusťovým skľučovadlom s priemerom 160 mm, držiakom nástrojov Multifix veľkosť A, dvoma lunetami a zariadením na chladenie. Maximálny priemer sústruženia nad lôžkom: 330 mm Maximálny priemer sústruženia nad saním: 197 mm Vzdialenosť medzi hrotmi: 750 mm Kedpfjqwgzqex Afdsdw Otáčky vretena: 70-2000 ot./min Priechod vretena: 38 mm Stroj je v dobrom stave, z učňovskej dielne. Dokumentácia stroja je k dispozícii.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders Kdsdpfx Afjvkfhpodow - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake Ksdpfxovivmys Afdedw >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: použitý, Rok výroby: 2005, Všeobecné informácie: - Model: ROBODRILL α-T2 STAMA - Výrobné číslo: 046VH155 - Rok výroby: 2005 - CNC riadenie: FANUC (model A04B-0094-B111#BD) - Hmotnosť: 2 200 kg - Prívod elektrickej energie: 200 V, 50/60 Hz, trojfázové - Príkon: 10 kVA ----- Obrábacie možnosti: - Operácie: - Frézovanie (vysokorýchlostné a vysokopresné) - Vŕtanie - Pevné závitovanie Kdjdpouru I Rofx Afdew ----- Pohyb osí: - Pojezd osi X: ~500 mm - Pojezd osi Y: ~400 mm - Pojezd osi Z: ~330 mm ----- Vreteno: - Kužeľ vretena: BT30 - Štandardné otáčky: až do 10 000 ot./min. ----- Zásobník nástrojov: - Typ: Automatický menič nástrojov - Doba výmeny nástroja: ~1,6 s ----- Rýchloposuv: - Rýchloposuv: 54 m/min v osiach X, Y a Z ----- Kľúčové vlastnosti: - Kompaktná konštrukcia s vysokou tuhosťou - Vysoká produktivita vďaka ultrarýchlym cyklom vŕtania a závitovania - Jednoduchá údržba (integrované diagnostické rozhranie FANUC) - Kompatibilita s automatizovanými výrobnými bunkami (spolupráca so spoločnosťou STAMA)

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm Kdodpfxjw Idllj Afdsw >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.