Hrotový sústruh

WEILER primus

Stav: pripravené na použitie (použité), Rok výroby: 1989, Funkcionalita: plne funkčný, Na predaj je sústruh značky Weiler, typ Primus LZ-GS. Itodsihig Iepfx Ac Hor Stroj je vo veľmi dobrom stave. Technické údaje: Rok výroby: 1989 Číslo stroja: 4443 Prevádzkové napätie: 380 V Výška hrotu: 120 mm Vzdialenosť medzi hrotmi: 430 mm Otáčky: 60 – 3000 ot/min v 18 prevodových stupňoch Priechod vretena: 23 mm Vreteno s kužeľom podľa DIN 55027 Konzola: MK 2 Posuvy: 0,03 až 0,15 mm/ot. Možné závity: metrické, palcové, modulové a s diametrálnym stúpaním Metrické závity: od 0,25 do 2,5 mm Rozmery: dĺžka 1,2 m, výška 1,3 m, hĺbka 0,65 m Ceny bez DPH. Obhliadka je možná po dohovore. Kontaktujte nás, náš tím Vám rád pomôže. Možný výkup alebo výmena! Nákup a predaj strojov NÁKUP / PREDAJ VÝROBNÝCH A KOVOOBRÁBACÍCH STROJOV A ĎALŠIEHO. Potrebujete kvalitný a cenovo dostupný stroj na obrábanie kovov do výroby? Alebo chcete svoj stroj predať? Viac informácií alebo kontaktné údaje nájdete na našej webovej stránke.

Stav: dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, číslo stroja/vozidla: 5088, otvor vretena: 25 mm, maximálna rýchlosť vretena: 3 000 ot./min, otáčky vretena (min.): 60 ot./min, celková výška: 1 300 mm, celková dĺžka: 1 200 mm, celková šírka: 800 mm, celková hmotnosť: 700 kg, WEILER PRIMUS GS pozdĺžny a priečny sústruh so závitovacou hriadeľou - Prevádzkové napätie: 380 V - Riadiace napätie: 220 V - Príkon: 2 kW - Menovitý prúd: 4,1 A - Frekvencia: 50 Hz - Dĺžka medzi hrotmi: 450 mm - Výška hrotu nad lôžkom: 130 mm - Priemer otáčania nad lôžkom: 260 mm Iedpfx Aox Ekm Ejc Hetr - Výška hrotu nad suportom: 70 mm - Priemer otáčania nad suportom: 140 mm Stroj je vybavený koníkom, držiakom sústružníckeho noža typu Multifix a trojčeľusťovým skľučovadlom značky RÖHM, priemer 120 mm. Súčasťou je aj vhodná dielenská skrinka s príslušenstvom. Jedná sa o stroj z učňovskej dielne. FCA D-73235 Weilheim Teck, naložené na LKW.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Sústruh Weiler Primus vo vynikajúcom stave. Možnosť predvedenia pod prúdom. Technické údaje: Vzdialenosť medzi hrotmi: 450 mm Výška hrotu: 120 mm Vretenová priechodnosť: 23 mm Otáčky: 30 – 3000 ot/min Koník: MK 2 Výkon pohonu: 1,5 kW Hmotnosť: 350 kg Iedpjx Htf Hsfx Ac Hstr Rozmery: 1200 x 650 x 1550 mm

Stav: dobrý (použitý), Vzdialenosť medzi hrotmi: 450 mm Výška hrotu: 120 mm Priemer vŕtania vretena: 23 mm Otáčky: 40 – 3000 ot/min Plynule nastaviteľný pohon s 3-stupňovou prevodovkou a digitálnym ukazovateľom otáčok Koník: MK 2 Výkon pohonu: 1,5 kW Hmotnosť: 350 kg Iodpfew I A Uxex Ac Hetr Rozmery: 1200 x 650 x 1330 mm Lakovanie: Resedová zelená RAL 6011. Digitálny displej: Na požiadanie za príplatok Príslušenstvo: Ďalšie príslušenstvo na vyžiadanie

Stav: použitý, Rok výroby: 1999, Funkcionalita: plne funkčný, Sústruh Weiler Primus VC, rok výroby 1999, s trojosou digitálnou indikáciou Siemens, trojčeľusťovým skľučovadlom, Multifixom, zadným krytom proti striekaniu a elektrickým krytom skľučovadla. Stroj je v dobrom, prevádzkyschopnom stave, po dohode možná prezentácia pod prúdom. Itodpfx Acox Afvgs Her

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Iodpfx Aju Aftgjc Hotr >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Iedpfx Acevtp Edj Hetr Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm Itjdpevkfhpjfx Ac Hjr - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev Ijdevivmyopfx Ac Hotr >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm Ijdpfx Asw Idllec Hjtr >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.