Excentrický press - jeden stĺpec

WEINGARTEN XLV II

Stav: použitý, Rok výroby: 1970, Tlak: 63 t Výložník: 250 mm Zdvih: 8–100 mm Hĺbka stola: 710 mm Šírka stola: 500 mm Rozmery piestnice: 450 x 280 mm Nastavenie piestnice: 63 mm Hsdpfx Agjcxxx Hjmeni Počet zdvihov: 140 zdvihov/min Celkový príkon: 7 kW Hmotnosť stroja cca: 3,5 t

Rok výroby: 2002, stav: použitý, Pressure: 63 t Outreach: 315 mm Stroke: 8–100 mm Strokes per minute: 140 spm Ram adjustment: 63 mm Table size: 1200x630 mm Ram surface: 800x315 mm Pass-through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Hjdpfx Agjlp U D Tsmeni Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation Roller block rails on the table Hydraulic clamp on ram Compensation cylinder Approved for manual loading operations

Rok výroby: 1965, stav: použitý, Pressure: 150 t Throat depth: 550 mm Stroke: 10 – 140 mm Table area: 1180 x 980 mm Strokes per minute: 40 spm Installation height: 500 mm Ram area: 1040 x 800 mm Hnedscubatspfx Agmsi Ram adjustment: 70 – 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight approx.: 12 t Space requirement approx.: 3 x 1.7 x 3 m - with auxiliary brake - ram weight compensation - motorized ram adjustment - central lubrication (manual) - rupture plate - clamping plate for table - safe for manual loading and unloading - operating manual available

Stav: použitý, Rok výroby: 1970, číslo stroja/vozidla: 120895, Pressure: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 spm Table size: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Hnodpfxjfx Hv Hs Agmsi Pass-through opening in clamping plate: 110 mm Ram mounting surface: 450 x 280 mm Machine weight approx.: 5.5 t Space requirement approx.: 1.2 x 1.7 x 2.7 m Single-column eccentric press with tiltable construction via hydraulic adjustment system, tiltable in 4 steps, pass-through opening to the rear (325 x 500 mm) and downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, mode selector switch for setting continuous or single stroke, emergency stop switch, piece counter, various accessories.

Rok výroby: 1980, stav: použitý, Pressure: 80 t Outreach: - mm Stroke: 50 mm Table area: 875 x 695 mm Ram area: 350 x 355 mm Ram adjustment: 71 mm Strokes per minute: 30 - 90 spm Frame gap: 450 mm Machine weight: approx. 6,2 t Hodpfodlcy Hjx Agmeni Floor space required: approx. 2.0 x 2.1 x 3.2 m Installation height (stroke down, ram adjustment up): 480 mm Further information: - The machine is currently undergoing partial overhaul - The machine has been newly equipped with the following components: * free-standing control cabinet with touchscreen, including wiring * new coating/painting of individual components in dismantled condition After the partial overhaul, the machine is safe for manual loading operation with open tooling; before delivery, a current UVV inspection and brake time measurement will be performed.

Stav: použitý, Pressure 55 t Outreach 250 mm Stroke 10-90 mm Hnjdpscp Apysfx Agmji Table size 640 x 495 mm Stroke rate 120 strokes/min Ram adjustment 55 mm Ram surface 290 x 210 mm Ram bore 40 H7 mm Drop-through opening in table 220 x 190 mm T-slots 22 mm Clamping plate 620 x 485 x 65 mm Total power requirement 4.5 kW Machine weight approx. 3.4 t Space requirement approx. 1.5 x 1.2 x 2.2 m - Pneumatic clutch-brake combination - Vogel central lubrication - Balluff cam controller - Electrically adjustable table height - Mechanical overload protection in the ram (shear pin) - Control cabinet with touchscreen - Foot switch

Stav: nový, Tlak 40 t Hedpfx Asb U Hwtsgmeni Vyloženie 225 mm Zdvih 8–84 mm Veľkosť stola 580 x 450 mm Nastavenie piestnika 55 mm Počet zdvihov 130 zdvihov/min Plocha piestnika 185 x 180 mm Vrtanie piestnika 40 H7 mm Prepadový otvor v stole 210 x 170 mm T-drážky 22 Upínacia platňa 570 x 450 x 65 mm Celkový príkon 3,5 kW Hmotnosť stroja cca 2,7 t Potreba priestoru cca 1,4 x 1,1 x 2,1 m - hydraulická spojkovo-brzdová kombinácia - centrálne mazanie Vogel - vačkový spínač Balluff - rozvádzač so dotykovou obrazovkou - výškovo nastaviteľný stôl - nožný ovládač

Stav: nový, Tlak 40 t Vyložení 225 mm Zdvih 8–84 mm Velikost stolu 580 x 450 mm Hnodpfx Aeb U Hwmjgmoi Nastavení beranu 55 mm Počet zdvihů 130 zdvihů/min Plocha beranu 185 x 180 mm Vrtání beranu 40 H7 mm Průchozí otvor ve stole 210 x 170 mm T-drážky 22 Upínací deska 570 x 450 x 65 mm Celkový příkon 3,5 kW Hmotnost stroje cca 2,7 t Potřebný prostor cca 1,4 x 1,1 x 2,1 m - pneumatická spojkovo-brzdová kombinace Ortlinghaus - centrální mazání Vogel - vačkový spínač Balluff - výškově nastavitelný stůl - rozvaděč s dotykovým displejem - nožní spínač

Stav: nový, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Rated energy (continuous): 1370 Nm Rated energy (single stroke): 2740 Nm Adjustable stroke: 4 - 80 mm Ram adjustment: 40 mm Ram surface: 160 x 160 mm Pass-through opening in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Hnedpjb U Hwnofx Agmsi Pass-through opening in table: 80 mm Machine weight approx. 1.9 t - Hydraulic clutch-brake combination Ortlinghaus - Central lubrication Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Rok výroby: 1990, stav: použitý, Pressure: 80 t Outreach: 250 mm Hnjdpfx Agsfn Aqnomoi Stroke: 5–95 mm Table dimensions: 805 x 510 mm Distance table/ram at bottom stroke: 400 mm Ram bore: 45 mm Ram adjustment: 100 mm Ram area: 360 x 300 mm Stroke rate: 55 strokes/min Total power requirement: 5.5 kW Machine weight approx.: 4 t Space requirement approx.: 0.83 x 1.7 x 2.6 m - Ram weight compensation The machine will undergo partial refurbishment at our facility next year (disassembly, inspection, new paintwork, new wiring, new control cabinet).