Rozvádzač Weinig Unicontrol 6

Weinig Unicontrol 6

Stav: veľmi dobrý (použitý), Window production line WEINIG, Unicontrol 6, S/N 035-839, year 1997 Cross-cut saw, pneumatically indexed (3 kW) with laser guide light Slot spindle 50 x 320 mm for 4 tools of 80 mm each – motor 11 kW Parallel spindle 50 x 120 mm – motor 7.5 kW Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each – motor 11 kW Fitting spindle, pneumatically indexed, 40 x 160 mm – motor 3 kW Saw/grooving spindle, horizontal above, pneumatically indexed – motor 3 kW Feed rate adjustable from 6–12 m/min – motor 1.1 kW Screen control for 99 window types Support rail for muntin bar production, pneumatically indexed Studio window device with digital angle display Electronic length stop POSITIOMAT with digital length display up to 3300 mm Rebating unit with extended support rail and sliding belt Transport system with return conveyor to operator at working height Complete system including operating manuals, wiring diagrams, spare parts lists LEITZ tool set, IV-66 (incl. round arch tooling) Podpfexx S Twsx Afperd GOLD tool set, IV-78 GOLD tool set, IV-90 THE MACHINE IS IN VERY GOOD TECHNICAL AND VISUAL CONDITION

Stav: takmer ako nový (použitý), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic, infinitely variable feed: 12 – 120 m/min • Feed motor: 22.0 kW • 1st (bottom) spindle: 11.0 kW • 2nd (right) spindle: 11.0 kW • 3rd (left) spindle: 15.0 kW • 4th (left) spindle: 11.0 kW • 5th (right) spindle: 11.0 kW • 6th (top) spindle: 22.0 kW • 7th (bottom) spindle: 30.0 kW • 8th (top) spindle: 11.0 kW • 9th (bottom) spindle: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETELY NEW MILLING SPINDLES • Spindle diameter: Ø 50 mm • Spindle speed: 6,000 rpm • 6 driven rollers on the table – hard-chromed • Spindles 1 + 6 + 7 + 8 + 9 with NEW counter bearings • Hydraulic counter bearing clamping • Spindles 2 + 3 + 8 + 9 with straight jointer • Spindles 4 + 6 with pneumatic pressure unit • NEW feed rollers D = 170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty top pressure rollers – pneumatic • Heavy-duty side pressure rollers – pneumatic • Automatic table lubrication – NEW • Centralized lubrication points • NEW freestanding control panel, 5 m cable • NEW freestanding control cabinet, 5 m cable • Operating manual, spare parts list, and wiring diagram + Numerous NEW spare parts / accessories included. Predpfetynpxsx Afpod Dimensions: • Total length: approx. 6,150 mm • Total width: approx. 2,160 mm • Machine weight: approx. 9,500 kg Electrical connection: • Total connected load: approx. 157 kW Condition: Machine as shown in the photos – technically as new Payment: Payment in full prior to loading, net Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with complete company details Subject to prior sale and errors excepted

Stav: použitý, Slitting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Summary ----- 1. Cross-cut saw ----- Cross-cut saw, pneumatic, with 8-position revolver stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor power: 3 kW Laser guide for recognizing the saw section Manual length stop 4100 mm 1. Tenon and slitting spindle ----- Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Maximum tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous spindle (climb and counter-climb) ----- Position: vertical, right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool circle: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical, right Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool circle: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical, right Number of tools: 3 pcs. Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool circle: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw, horizontal-vertical indexed ----- Position: horizontal top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial feed: 2 positions Radial feed: 2 positions Further features ----- Prjdpfx Asxvtggjfpjd Rebating unit for tear-free rebating Double-part package Return conveyor for single-operator use at working height: Swivel tray Screen control, 99 programs Angled window fitting unit Electronic angle display for angled windows INCLUDES OPPOLD window tooling, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Tools are sold in the current condition, quantity, and with accessories as currently available. Note regarding window cuts, tooling drawings, tool system lists: Engelfried GmbH does not provide a guarantee that the tools actually supplied match the stated and drawn systems. (Specifications according to manufacturer - without guarantee!)

Stav: použitý, Slot spindle 1 unit Number of milling units: 4 Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 ----- Technical Data Overview (Please inquire about any additional included accessories) Pos. 1: Crosscut Saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser guide for identification of saw cut section CNC-Controlled Length Stop ----- > Length: 3500 mm > Electronic length stop including positioned crosscut saw Pos. 2: Tenoning and Slotting Spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 3000 rpm > Max. cutter circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Pos. 3: 1st Profiling Spindle (Climb & Conventional Cut) ----- Podsxtvgkjpfx Afpord > Position: Vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. cutter circle: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd Profiling Spindle ----- > Position: Vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thickness 68 - 92 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. cutter circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the processing of narrow, short parts (e.g., glazing bars) Sash bar guide consisting of: Sash bar support rail from above, located in the area of the vertical right profiling unit and profiling spindle Pos. 5: Horizontal Top Profiling Unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutter circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Pos. 6: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: Vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Max. cutter circle: 210 mm > Motor power: 3.0 kW Additional features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed rail clamping > Scribing device for splinter-free rebating > Twin part package > Return conveyor for one-man operation: swivel belt > Screen-based control > Angled window device > Electronic angle display for angled windows > Industrial PC with Windows PC control/NEXUS Extraction connection diameters: ----- Crosscut saw: 80 mm Slot spindle: 140 mm Profile spindle 1: 140 mm Profile spindle 2: 140 mm Grooving unit: ...

Stav: veľmi dobrý (použitý), Rok výroby: 2015, Funkcionalita: plne funkčný, číslo stroja/vozidla: SK-K-24001, 1 Optimalizačná priečna píla so skenerom Výrobca: Dimter Typ: OptiCut 450 Rok výroby: 2015 Číslo položky: SK-K-24001 DIMTER priečna píla s 1 x OptiCut 450 a podávacím systémom F 100 Podpjwya Syjfx Afpjrd s LuxScan CombiScan+ C 200 a meraním zakrivenia Zariadenie bolo v prevádzke do roku 2024, bolo odborne demontované a je možné si ho prezrieť.

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- Podpfx Afevu Hghjperd > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and thoroughly inspected before delivery. Summary of Technical Data (Please inquire for any additionally included accessories.) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, continuously adjustable horizontally > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut detection > NC length stop, mounted on slotting table included Positioning of the cross-cut saw integrated in the control system. > Length: 3,500 mm Pos. 2: Tenoning and slotting spindle ----- > Number of tools: variable, adjustment stepless via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Psdpevu Hfqofx Afpsrd Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Bar guide consisting of: guide rail in the stop (area of climb-cut spindle), bar support bar from above in the area of vertical profiling unit (right) and profiling spindle. Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions via pneumatic revolver > Radial adjustment: 125 mm, 8 positions via pneumatic revolver Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic revolver > Radial adjustment: 100 mm, 8 positions via pneumatic revolver > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Rebating unit for tear-free rebate cutting > Double part package > Return device for single-operator use: pivoting belt > Screen control > Tilt window facility > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original images available yet. Photos show an identical machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Stav: použitý, Rok výroby: 2007, No. 3177 Optimization Crosscut System Grecon Dimter OptiCut 200-1 Used, year of manufacture 2007 For cutting to fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 - 5,000 mm Infeed widths min./max. 80 - 200 mm Infeed thicknesses min./max. 38 - 80 mm Maximum wood cross-section: 200 x 50 mm Final wood length min./max. 700 - 1,000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood System performance: Feed speed max. 180 m/min, steplessly adjustable Cutting cycle time incl. braking 0.7 - 1.2 s Position overview: Pos. 1: Infeed conveyor belt in front of saw Length 1.5 m, coupled with the feed motor of the saw Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and integrated waste ejection system Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, OptiCom software package for system control included The machine is loaded from the left Pos. 3: Outfeed conveyor belt / sorting station With drive unit, without ejector Belt length approx. 1.5 m Machine already dismantled and stored The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The feed table is present, only the rubber belt is missing. Sale on behalf of the customer, ex location Austria, without transport and installation Errors in description and pricing excepted Transport and loading by us available as an option To avoid possible misunderstandings, an on-site inspection is recommended and can be arranged by appointment Sale is in as-is condition Technical data, condition descriptions, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded. Applies: "purchased as inspected" Pictures and videos are for reference only and do not represent the actual scope of delivery Prjdpfx Afju Atmuspsd Payment terms: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex location

Stav: použitý, Rok výroby: 1997, Beam planer 260 x 160 mm, with following chamfering unit on the top spindle. Air cushion table with two-axis control for left and top spindle, brand new control system (latest Weinig version). Max. working width: 260 mm, max. working height: 160 mm. Number of spindles: 6 pcs. 1st spindle: bottom, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 2nd spindle: right, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm, motor power 11.0 kW, shared motor with left spindle 3rd spindle: left, spindle diameter 40 mm, clamping length 170 mm, speed 6000 rpm 4th spindle: top, spindle diameter 40 mm, clamping length 270 mm, speed 6000 rpm, motor power 11.0 kW 5th spindle: bottom, spindle diameter 40 mm, motor power 11.0 kW, speed 6000 rpm, clamping length 270 mm 6th spindle: top, chamfering aggregate Motor brakes: mechanical Height adjustment for top spindle: electric Optional with/without feed Feed brake system: Yes Feed speed stepless up to: 3 - 23 m/min Prodpfx Aowwwkhefped Feed roller pressure: pneumatic Feed power: 4.0 kW Feed drive: Cardan Lubricant pump: manual Max. planing depth: 10 mm Jointing rebate cutter on jointer: Yes Driven rollers in table: 1 pc Control type: PLC control Spindle position readout: mechanical display Infeed rollers before jointer: Yes Air cushion table: three-track Central lubrication point: Yes Description: Short infeed table 1050 mm with internal lighting Location: Nattheim

Stav: veľmi dobrý (použitý), Kalibrovanie a jemné brúsenie stroj s 1 brúsnym agregátom, 1 motorom, obrábanie zhora Pracovná šírka: 1000 mm Rozmery brúsneho pásu: 2200 x 1030 mm Rozmery obrobku: 3 – 170 mm Motor na nastavenie výšky stola: 0,18 kW, 400 V, 50 Hz Hlavný motor: 7,5 kW, 400 V, 50 Hz 2 posuvné rýchlosti: 5,5 & 11 m/min 1. Agregát: Kombinovaný agregát, brúsny valec, pogumovaný, 90 Sh / brúsna topánka pneumatická Brúsna topánka NOVÁ 2. Agregát: Čistiaca kefa Potrebný tlak vzduchu približne 6 barov Priemer odsávacej prípojky: 200 mm Rozmery cca d x š x v = 1385 x 1980 x 1900 mm Hmotnosť cca 1800 kg Automatické nastavenie hrúbky obrobku s digitálnym zobrazením Ovládanie oscilácie brúsneho pásu Núdzové zastavenie pásu s kotúčovou brzdou Predĺženie stola s 3 valcami vo výstupe Núdzové tlačidlo STOP Hlavný vypínač Prodjudxchopfx Afpod DOPRAVNÍKOVÝ KOBEREC AKO NOVÝ – bol vymenený pred cca 3 rokmi VIAC AKO 30 ks ŠIROKOPÁSMOVÝCH BRÚSNYCH PÁSOV Poznámka k použitým strojom: • Technické údaje a medzipredaj sú vyhradené pre omyly. • Uvedené ceny platia ako ceny za odber zo skladu – vyzdvihnutie zdarma! • Stroje boli vyčistené a otestované z hľadiska funkčnosti. • Všetky stroje sa predávajú v stave, v akom boli skontrolované, bez akýchkoľvek zárukových nárokov. Kupujúci má možnosť si stroje na mieste prezrieť. • Osobitné dohody sú možné len v písomnej forme. (Na dopyty odpovedáme len pri uvedení vašej adresy a telefónneho čísla!)