Pochodný, optimalizovaný pre testovanie batérií

Weiss Klimaprüfkammer WK 10/40-80 V= ca.10 m³

Rok výroby: 2019, stav: dobrý (použitý), Weiss Type: WK 10/40-80 Test chamber volume approx. 10 m³ 10 m³ = 10,000 liters Modular climate test chamber Weiss WK 10/40-80 Chiller configuration: water-cooled Refrigerant type: R449A Special equipment for battery testing: The climate test chamber is equipped with enhanced safety features for battery and accumulator testing (e.g. lithium-ion): • Pressure relief flap for controlled pressure discharge in case of malfunction • Gas warning system for early detection of critical gas concentrations • Fire extinguishing system with SalgroMAG aerosol extinguishing generators This equipment significantly increases safety when carrying out battery tests and supports use in development and testing environments (in consideration of a customer-side safety concept / BMS). Description: For sale is a professional climate test chamber from Weiss Technik, type WK 10/40-80, year of manufacture 2019. The unit is used for temperature and climate testing and is ideally suited for industry, research, development, and quality assurance. The system allows temperature and humidity tests across a wide range and is designed for continuous operation in industrial and development laboratories. Particularly suitable for: Functional and lifetime tests Material and component testing Pre-aging and climate simulation Conditioning of samples Testing of batteries and accumulators (e.g. lithium-ion) under defined climate conditions (with appropriate customer safety concept / BMS) Operation is via a modern S!MPAC® control system with web panel; programs can be stored and automated. The unit was in use until recently and is fully functional. General information: Manufacturer: Weiss Umwelttechnik GmbH Type: WK 10/40-80 Year built: 2019 Condition: used, fully functional CE marking: available Made in Germany Rsdpfsyyu Rqox Ahysr Control system: S!MPAC® control Web panel / touch operation Program and time-controlled operation possible Temperature & climate: Temperature range: −40 °C to +80 °C Temperature accuracy: ± 1 K Humidity range: 10 % to 95 % r.h. Humidity accuracy: ± 5 % Dimensions: External dimensions (W×D×H): approx. 3300 × 5000 × 2500 mm Internal dimensions (W×D×H): approx. 3000 × 2200 × 1500 mm Test chamber volume approx. 10 m³ Media & systems: Spray system: water pressure 3 bar Compressed air connection: min. 5 bar Refrigerant: R449A Electrical data: Mains connection: 3/N/PE, 400 V AC ±10 %, 50 Hz Rated power: approx. 44.9 kW Rated current: approx. 74 A Weight: approx. 3,900 kg Scope of delivery: Climate test chamber Weiss Technik WK 10/40-80 Control system / web panel Operating instructions (German) Nameplate & documentation Condition: used Scope of delivery: (see photo) (Technical data may be subject to change, information provided without guarantee!) For further questions, please contact us by phone.

Rok výroby: 2025, stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: ESS B2 - *M 0--.10*, Star screen for screening, for example, soil, compost, wood chips, etc. Weight: 2,700 kg. Adjustable screening size from 12 to 40 mm. Connection: 3-phase, 400 V, 32 A, 50 Hz frequency, total power 11.25 kW. Throughput from 40 to 60 m³/h depending on material and screen size. Delivery time approx. 14 weeks after order confirmation. Rsdpfxeirnrpj Ahysr

Rok výroby: 2024, prevádzkové hodiny: 4 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: H2,5TMNI, Universal testing machine H 2.5 TMNI L Please always include your email address with your inquiry. Mechanical design: Single-spindle universal testing machine with backlash-free recirculating ball screw in C-frame construction, featuring spindle protection and brushless drive motor, Fmax = 2.5 kN 1 test area up to nominal load: Working area depth: 105 mm Maximum test stroke without test fixtures, adapters, and KMZ: 1375 mm Maximum test chamber height (between lower fixed and moving crosshead) without test fixtures, adapters, and KMZ: 1375 mm Traverse speeds: Testing speed 0.005 - 1200 mm/min up to nominal load Return speed 1200 mm/min Force measurement: Rjdpfjmdn Trox Ahyer Measuring range depending on the installed load cell: 0.4 - 100% of nominal load, class 1 (optionally class 0.5) according to DIN EN ISO 7500-1 and ASTM E4. Resolution of force measurement, depending on integration time: between +/-160,000 and +/-900,000 digits. The machine is delivered with a factory test certificate. If factory or DAkkS calibration on-site is required by the customer, this must be calculated separately. Crosshead travel measurement: Incremental quadrature input with encoder monitoring, storage of crosshead position Resolution of crosshead travel measurement:

Stav: dobrý (použitý), VLM Typ: V.745.672.120 Model CC 1000-FL HL Komora na skúšky korózie pre testy v soľnej hmle Špecifikácie: Objem skúšobného priestoru: cca 1000 l Vnútorné rozmery skúšobného priestoru (ŠxHxV1/V2): 1400x800x800/1020 mm Rozmery otvoru dverí (ŠxV): 1300x680 mm Vonkajšie rozmery krytu (ŠxHxV): 2162 x 995 x 2080 mm Prevádzkový teplotný rozsah: 5°C nad teplotou miestnosti až do +80°C Vysokozáťažové vyhotovenie na zaťaženie do 350 kg Riadenie procesu: Beckhoff PLC, farebný dotykový displej, 50 pamäťových miest pre skúšobné postupy, 50 pamäťových miest pre testovacie segmenty, rampy: vlhkosť a teplota v celom pracovnom rozsahu, Ethernetové pripojenie Elektrické pripojenie: 400 V, 50 Hz, 5700 W Pitná voda: minimálne 2,5 bar, pripojenie ventilu 3/4" vonkajší závit na pripojenie iónomeničovej patróny Stlačený vzduch: 7-8 bar Odpadová voda: sifón / pripojovacia vsuvka na hadicu ID 30 mm Odťah: koniec rúry, vonkajší priemer 75 mm Prevádzkové režimy: Soľná hmla Kondenzačná voda (CWC) Rodpfx Aet Igc Sohyer Vetranie miestnosti Teplý vzduch Riadená vlhkosť

Rok výroby: 2023, prevádzkové hodiny: 5 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, Universal testing machine H5TMCI, extended by 250mm Mechanical design: - 2 backlash-free recirculating ball screws, driven by AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm - 1 test space up to nominal load: - Test space width: 420 mm (optional extensions: +190mm / +330mm / +620mm) - Max. test stroke without test tools, adapters, and load cells: 1025 mm (optional extensions: +250mm / +500mm) - Optional: Conversion to floor-standing model requires additional subframe assembly Travel speeds: - Test speed: 0.001 – 2000 mm/min at full load - Return speed: 2000 mm/min Force measurement: - Measurement range: 0.4 – 100% of nominal load, Class 1 (optionally Class 0.5) (±1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: ±180,000 digits at 20ms integration time The machine is supplied with a factory inspection certificate. Should the customer request on-site factory or DKD calibration, this will be invoiced separately. Crosshead travel measurement: - Incremental square-wave input with encoder monitoring, storage of crosshead position - Crosshead travel measurement resolution: Rjdpfjmdpafex Ahysr

Rok výroby: 2020, stav: veľmi dobrý (použitý), Weiss Type: C/800/55a/25/S Rjdpew R Rt Ijfx Ahyjr Year of manufacture: 2020 Weiss Climatic Test Chamber ClimeEvent, water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load: Designed for a maximum load of 250 kg Temperature Testing Specifications: Temperature range: -55 to +180°C Temporal temperature fluctuation at chamber center: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (down to -45°C) Maximum heat compensation: 8000 W Climatic Testing Specifications: Temperature range: +10 to +95°C Humidity range: 10 to 98 % r.h. Climate Performance Data (extract): Humidity range: 10 to 98 % relative humidity (r.h.) Temporal humidity deviation: At chamber center at steady-state, depending on climatic value: ±1 to ±3 % r.h. Temporal temperature deviation: At chamber center at steady-state, depending on temperature: ±0.1 to ±0.3 K Spatial temperature uniformity: Relative to the set value (in >20% r.h. range): ±0.5 to ±1 K Operating Data: LED strip 24 V, 6.8 W / 2 × Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode function. Weight: approx. 2050 kg For your peace of mind as a buyer, the following information: The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. Refill with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted.) For additional questions, we are happy to assist you by phone.

Stav: veľmi dobrý (použitý), Type: Weiss WT3-340/70 Very good condition. Weiss Temperature Chamber with S!MCON / 32-controller, air-cooled (Refrigerant R-404A, can be converted to R452A upon request) Test chamber volume: approx. 335 liters Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Operating data: Test chamber lighting: Halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ±10% 50 Hz Rated current: 12.5 A Rated power: 4.1 kW Back-up fuse (on-site): 16 A slow-blow Sound pressure level: approx. 58 dB(A), measured at 1m distance from the front, 1m height Data for temperature testing: Temperature range: -72 to +180 °C Temporal temperature deviation at center of usable space: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±1.5 K Rjdpfx Aov Edd Sshysr Temperature gradient (according to IEC 60068-3-5): 1 to 4 K Temperature change rate (according to IEC 60068-3-5): - Heating: 3.0 K/min - Cooling: 3.0 K/min Heat compensation max. 1500 W Refrigerant: R-404A / R-23 Weight: 585 kg For your security as a buyer, the following steps are performed on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented trial run with calibrated measuring equipment. Condition: used / Very good condition

Stav: veľmi dobrý (použitý), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touch Panel All control and operation commands can be triggered by simply touching the function icons on the “Touch Panel” control unit. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with ports on both the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Standard fitted ports: R1: DN 125 mm L1: DN 85 mm Volume: 335 liters Test Chamber Dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature homogeneity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% rH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% rH Operational Data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Redpfxov Sr Hzj Ahyor Rated power: 4.9 kW Customer side fuse: 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg Important information for you as a buyer: The following steps are proactively carried out on all chambers offered by us: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: veľmi dobrý (použitý), Here we offer a Binder incubator. Key Features Model BD 115 | Standard Incubator with Natural Convection Technical Specifications BD 115 External Dimensions: - Net width: 835 mm - Gross height (including feet/casters): 705 mm - Net depth: 645 mm - Gross depth (including door handle and exhaust duct): 750 mm - Minimum rear clearance: 100 mm - Minimum lateral clearance: 160 mm - Exhaust duct outer diameter: 52 mm Doors - Number of doors: 1 Internal Dimensions: - Width: 600 mm - Height: 480 mm - Depth: 400 mm - Internal chamber volume: 115 litres - Steam space volume: 142 litres Shelves - Number of shelves: 0 - Maximum number of shelves: 5 - Maximum load per shelf: 20 kg - Maximum total load: 50 kg Weight - Weight (empty): 61 kg Temperature Data Rsdpfxjqzx Nne Ahyjr - Temperature range: 5°C above ambient up to 100°C - Temporal temperature deviation: at 37°C ±0.1 K, at 50°C ±0.1 K - Spatial temperature deviation: at 37°C ±0.4 K, at 50°C ±0.8 K - Heat-up time: to 37°C - 70 minutes, to 50°C - 90 minutes - Recovery time after 30 sec door opening: at 37°C - 10 minutes, at 50°C - 12 minutes Electrical Data: - Model: BD115-230V - Protection class: IP 20 - Rated voltage (+/-10%) at 50 Hz mains frequency: 230 V - Rated voltage (+/-10%) at 60 Hz mains frequency: 230 V - Power supply: 1N~ - Rated power: 0.20 kW Type: BD 115 Condition: used Scope of delivery: (see picture) (Technical data and information are subject to change and errors excepted!) For further questions, please contact us by phone.

Stav: veľmi dobrý (použitý), Weiss Type: SC/KWT 450 Salt Spray Chamber Technical Data: Test chamber volume: 450 liters Maximum load: 100 kg Brine reservoir: 180 liters Redpfx Ahew Hz Troyjr External dimensions: Height 920 mm, Width 1930 mm, Depth 800 mm Test chamber dimensions: Height 740 mm, Width 850 mm, Depth 570 mm Applications: Corrosion testing: Salt spray test: Ambient temperature up to +50°C Condensation water test: Ambient temperature up to +45°C Humidifier: +75°C Temperature stability: Temporal temperature deviation: ± K. Voltage: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.0 kW Rated current: 8.5 A Combination: Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Standard climate (ventilation): DIN 50014 Weight: 180 kg Condition: used Scope of delivery: (See image) (Errors and amendments to the technical data and specifications excepted!) For further questions, we are happy to assist you by phone.