Obalovačka kúpiť použité (167)

Rok výroby: 2026, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S23SynthesiLow05, Exhibition machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp, 500 mm long TECHNICAL DETAILS: LOW PROFILE turntable · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm Iedpfoykuiajx Ac Astd · Max. load capacity: 1200 kg · One ramp included Wrapping height (pallet included): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, independently adjustable for up and down movement Acoustic signal at cycle start and end Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push buttons for machine power on, Start & Stop functions, & Reset as per CE standard, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Steplessly adjustable turntable speed: 5–12 rpm Carriage speed up and down independently adjustable F03 – Carriage upward speed: 1.3 up to 5.4 m/min F04 – Carriage downward speed: 1.3 up to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photo cell delay for wrapping height F13–F16 – Film tension for bottom/top wrap, up and down, each independently adjustable F62 – Ergonomic height for film change Display for film consumption (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 – Cross wrapping (up/down) F01-2 – Simple wrapping (only upward or only downward) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with predefined start and stop height F12 – Wrapping to a stored height (with photo sensor deactivated) F22/F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for edge protection application F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet corners Wrapping cycle with manual or motor-driven rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm – Height 500 mm – Core Ø76 mm Standard connection values: 230 V – 1PH+N+PE – 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% available Further machines available from stock in Ludwigsburg.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25MythoSarya05, Výstavná baliaca linka Mytho S s TP / výrez v tvare podkovy, priechodná na úrovni podlahy pre paletový vozík aj elektrickú paletovú vozíkovú (E-paletovú) myš. MAST VERZIA Výška ovinovania: 2450 mm 99 programov 7" dotykový displej Itjdpfxsykuh Ne Ac Aod Fóliový vozík typ „PRS“ (Power Roller Stretch) s prednapnutím fólie 200 % (na požiadanie možnosť vyššieho alebo nižšieho prednapnutia) Otočný tanier / TP Ø 1650 mm / otvorenie 06:00 – stožiar 12:00 (voľne nastaviteľné) ARYA systém na automatické zahájenie a odstrihnutie fólie vr. infračerveného diaľkového ovládania

Rok výroby: 2025, prevádzkové hodiny: 1 h, stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: SFERA21Kommission1, Stretch Wrapper ATLANTA SFERA Easy - 6 individually programmable wrapping programs - Wrapping height: 2200 mm - Mast height: 2050 mm (fits through almost any door) - FE electromagnetic film brake - Film tension electronically controlled via control unit - Film specification: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm - GMK (compass): winding start and end position always identical - Film tension can be stored in 4 steps TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series - 160 pallets per charge – charging time: 8 - 10 hours - High-frequency battery charger with LED display - Wrapping height (machine with mast, including pallet): 2,150 mm - Height detection via light sensor or dimension input on display - Safety bar for emergency stop of the drive unit - Emergency stop switch according to CE regulations - Acoustic warning signal and warning light at machine start - Fall protection for the film carriage - Push buttons for Start and Stop - Machine function in accordance with CE guidelines Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: - All function parameters adjustable via display - F00 - Display lock for program modifications - F02 - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed upwards and downwards can be set independently - F03 - Carriage speed upwards from 1.3 up to 5.4 m/min - F04 - Carriage speed downwards from 1.3 up to 5.4 m/min - F05 - Number of wraps at pallet base (1 - 10 wraps) - F06 - Number of wraps at pallet top (1 - 10 wraps) - F09 - Adjustment of pallet wrapping height - F13 - F16 - Film tension for base & top wrapping / ascent & descent independently adjustable - F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01 - 1 - Cross wrapping (upwards/downwards) - F01 - 2 - Simple wrapping (upwards or downwards only) - F10 - F11 - Wrapping cycle with predefined start and stop heights - F12 - Wrapping to a preset height (disabling light sensor for height) - F21 - Wrapping cycle for oversize pallets - F22 / F23 - Wrapping cycles for top sheet film - F29 - Soft start cycle for application of edge protection - F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps - Soft start to reduce film tears at sharp pallet edges - Wrapping cycle with manual or motorized cord formation (optional) - Optional photo sensor for dark packaged goods *Leasing: 48-month term // 0 down payment Ijdpfx Acoykuhps Astd The unit was in operation as a replacement device at a customer's site for 3 months. There are a few scratches – also on the housing – see photos. The unit is in excellent condition. We are happy to send more photos upon request. The unit can be inspected by appointment in Ludwigsburg. Immediately available. Price ex stock Ludwigsburg.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S22EVA_07, Demonstration machine – like new. EVA Base frame raised by 150 mm – 200 mm, suitable for loading with electric pallet truck or forklift – height adjustable Turntable Ø 1,500 mm Max. pallet size: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (including pallet): 2,200 mm Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed, upward/downward Signal tone at start of wrapping and at end of cycle Emergency stop switch in compliance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Push button for machine on/off as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F02 – Infinitely adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards can be set independently F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Setting of pallet wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 1 storable wrapping program F01–1 – Cross wrapping (upwards/downwards) F01–2 – Single wrapping (only up or only down) F01–3 – Manual wrapping F12 – Wrapping up to a preset height (photo sensor deactivated) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet corners FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE with manually adjustable brake roller at film carriage Film specification: max. external diameter Ø 250 mm – core Ø 76 mm – height = 500 mm Standard electrical connection: 230 V – 1L+N+PE – 50 Hz Total output: 1.2 kW / 6A Iodpfxjykuhce Ac Aotd Other units immediately available from stock.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S23NEOS04, Exhibition Unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. Up to 99 individual programs can be saved Supplied with 1 remote control – additional remotes available as an option Wrapping height: 2,150 mm Mast height: 2,050 mm (fits through almost any doorway) Film power stretch: 120–400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable from 120% to 400% via control panel Film tension electronically controlled via control unit Quick-insert IEF system for easy film roll change Film specifications: max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm Automatic film cutting unit Film tension can be stored in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series Minimum 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height "machine with mast (including pallet)": 2,150 mm Height detection by light sensor or input via display Safety bar for emergency stop of drive unit Emergency stop switch according to CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Start & stop push button Machine operation according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min Carriage speed upward and downward adjustable independently - Carriage speed upward: 1.3 to 5.4 m/min - Carriage speed downward: 1.3 to 5.4 m/min - Number of wraps on pallet base (1–10 wraps) - Number of wraps on pallet top (1–10 wraps) - Setting of pallet wrapping height - Film tension for base & top wraps / up & down adjustable independently - Film pre-stretch for base & top wraps / up & down adjustable independently - Ergonomic height for film change STORED WRAPPING PROGRAMS ON CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (upward or downward only) - Wrapping cycle with predefined start and stop height - Wrapping to a saved height (disabling height sensor) - Wrapping cycle for oversized pallets - Wrapping cycle for top sheet application - Soft start cycle for edge protection application - Wrapping cycle with reinforcement and adjustable wrap count Soft start to reduce film breakage on sharp pallet edges Itedpjykug Sjfx Ac Ajd Wrapping cycle with manual or motorized rope creation (optional) Additional units available immediately from stock in Ludwigsburg.

Rok výroby: 2026, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25MARATHON01, Poloautomatický ručný ovinovací stroj na fóliu MARATHON TECHNICKÉ DETAILY Celosvetovo jediný „PATENTOVANÝ“ mobilný stretchovač bez elektrického pohonu, printf schopný ovinovať palety LLDPE stretch fóliou. Stroj ovinie náklady akéhokoľvek tvaru, hmotnosti a rozmeru. Odporúča sa používať už prednatiahnutú fóliu s maximálnym priemerom rolky Ø 230 mm. Min. rozmery nákladu: 650 x 400 mm Min. hmotnosť nákladu: 50 kg Výška ovinovania (vrátane palety): 2000 mm Jednoduchá obsluha, nepotrebná výkonnosť motora. Manuálny pohyb ovládaný obsluhou. Vozík na fóliu sa pohybuje ručne hore a dole. Stroj sa vyznačuje zjednodušenými funkciami. Nahrádza ručné balenie fóliou. MANUÁLNE MOŽNOSTI OVINOVANIA Obsluha je motorom a voľne si určuje počet závitov smerom nahor aj nadol. Ijdpfx Aoykuf Iec Aotd FÓLIOVÝ DRŽIAK TYP „FM“ S MECHANICKOU BRZDOU S manuálne nastaviteľnou brzdovou kladkou na fóliovom držiaku. Špecifikácia fólie: max. vonkajší priemer Ø 230 mm – jadro Ø76 mm – výška = 500 mm Voliteľne: stretch fólia s jadrom Ø50 mm alebo bez jadra. Ďalšie zariadenia skladom v Ludwigsburgu.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, Výstavná baliaca linka Mytho S s TP / výrez v tvare podkovy, priechodná na úrovni podlahy pre paletový vozík aj elektrickú paletovú vozíkovú (E-paletovú) myš. MAST VERZIA Výška ovinovania: 2450 mm 99 programov 7" dotykový displej Fóliový vozík typ „PRS“ (Power Roller Stretch) s prednapnutím fólie 200 % (na požiadanie možnosť vyššieho alebo nižšieho prednapnutia) Otočný tanier / TP Ø 1650 mm / otvorenie 06:00 – stožiar 12:00 (voľne nastaviteľné) Isdpeykud Rjfx Ac Ajtd ARYA systém na automatické zahájenie a odstrihnutie fólie vr. infračerveného diaľkového ovládania

Rok výroby: 2026, prevádzkové hodiny: 2 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S22EVA_03, Exhibition machine – like new. EVA Rotary table / base frame raised / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included): 2,200 mm 150mm – 200mm raised base frame, for loading with electric pallet jack – adjustable Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and cycle end Emergency stop button according to CE regulations Turntable always stops at the same home position Fall protection for the film carriage Push buttons for machine power on and start/stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display F02 – Infinitely variable turntable speed 5-12 rpm Carriage speed upward and downward can be set independently F03 – Carriage speed upward from 1.3 to 5.4 m/min F04 – Carriage speed downward from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1 – 10 wraps) F06 – Number of wraps at pallet top (1 – 10 wraps) F09 – Adjustable wrapping height F62 – Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 – 1 – Cross wrap (up/down) F01 – 2 – Single wrap (upwards or downwards only) F01 – 3 – Manual wrapping F12 – Wrapping up to a preset height (with photoelectric sensor deactivated) F29 – Soft start cycle for applying edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Itodpoykud Defx Ac Aed With manually adjustable brake roller on the film carriage Film specifications: Max. outer diameter Ø 250 mm – core Ø76mm – height = 500 mm Standard connection: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Other machines available from stock immediately.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25Lybra02, LYBRA EASY / 3 Programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet dimensions: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearing Height sensing via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage lift speed, independently adjustable for upward/downward movement Acoustic signal at wrapping start and cycle end Emergency-stop switch in accordance with CE regulations Positioning aid for correct pallet placement included Iodpfx Aoykudkjc Ajtd Safety bumper for collision protection Pushbuttons for machine on/off and start/stop as per CE standards, Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All operational parameters adjustable via display F02 - Steplessly adjustable turntable speed 5-12 rpm Carriage lift speed upward and downward separately adjustable F03 - Carriage lift speed upward: 1.3 to 5.4 m/min F04 - Carriage lift speed downward: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric cell delay for wrap height F62 - Ergonomic height for film change PROGRAMMABLE WRAPPING CYCLES VIA CONTROL PANEL 3 storable wrapping programs F01 - 1 - Cross wrapping (upward/downward) F01 - 2 - Simple wrapping (only upward or only downward) F01 - 3 - Pushbutton for manual operations F12 - Wrapping to set height (disabling photoelectric sensor for height detection) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for application of edge protectors Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on film carriage Film specifications: max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm Standard connection: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Optional: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE With electromagnetic brake roller Film specification: max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm Standard connection: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5 A (with PRS / PS) Optionally also available with manual rope formation. Further units available from stock in Ludwigsburg for immediate delivery.

Rok výroby: 2026, stav: ako nová (výstavný stroj), číslo stroja/vozidla: S23Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start – start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrap start and at cycle end Emergency stop switch in accordance with CE regulations Turntable always stops in the same home position Fall protection for film carriage Pushbuttons for machine power on, start & stop functions, and reset in accordance with CE standard Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 – Display lock/program modification lock F02 – Steplessly adjustable turntable speed 5–12 rpm Carriage speed upwards and downwards adjustable independently F03 – Carriage speed upwards: 1.3 – 5.4 m/min F04 – Carriage speed downwards: 1.3 – 5.4 m/min F05 – Number of wraps at pallet base (1–10 wraps) F06 – Number of wraps at pallet top (1–10 wraps) F09 – Photoelectric sensor delay for wrapping height F13 – F16 – Film tension for base/top wrapping or up-/down-wrapping independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) Itedpfx Aceykuddj Asd ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01–1 – Cross wrapping (upwards and downwards) F01–2 – Simple wrapping (upwards or downwards only) F01–3 – Pushbutton for manual functions F10–F11 – Wrapping cycle with preset start and stop height F12 – Wrapping to a pre-set height (disabling the photoelectric height sensor) F22 / F23 – Cycle for top sheet application F29 – Soft start cycle for application of edge protection F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tearing at sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via pushbutton FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Via manually adjustable brake roller on film carriage Film specifications: max. outer diameter Ø 250 mm, core Ø76mm, height = 500 mm Standard connection: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set at 200% Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photoelectric sensor for black products Cutting device etc. Further machines available ex stock Ludwigsburg. Some images may show optional equipment subject to surcharge.

Rok výroby: 2026, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25EVA01, Stretch Wrapper EVA *Leasing - 48-month term with no down payment TECHNICAL DETAILS Turntable / Base Frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Itedjykucyspfx Ac Asd Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Audible signal at wrap start and end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push button for machine power on and start/stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All functional parameters adjustable via display F02 - Infinitely adjustable turntable speed: 5-12 rpm Carriage speed up and down adjustable independently F03 - Carriage speed upwards: 1.3 to 5.4 m/min F04 - Carriage speed downwards: 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (upwards only or downwards only) F01 - 3 - Manual wrapping F12 - Wrapping to a preset height (with photoelectric sensor deactivated) F29 - Soft start cycle for application of edge protection Soft start to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manually adjustable brake roller on the film carriage Film specification: Max. outer diameter Ø 250 mm - Core Ø 76 mm - Height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A Optional: Turntable 1,650 mm Ramp Base frame Photoelectric sensor for black products Additional systems available from stock in Ludwigsburg.

Rok výroby: 2025, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S23SynthesiLow04, Demonstration machine, like new. SYNTHESI with a flat turntable Turntable height: 25 mm Short ramp: 500 mm long Manual rope formation at the pallet, mounted on the frame to reinforce the wrapping TECHNICAL DETAILS: Turntable LOW PROFILE · Height: 25 mm · Max. pallet dimensions: 1000 x 1200 mm Ijdpfx Acsykucmo Aetd · Max. load capacity: 1200 kg · One ramp included Wrapping height (including pallet): 2,200 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Signal tone at the start of wrapping and end of cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Crash protection for the film carriage Push button for machine power-on, start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters adjustable via display F00 - Lock display for program changes F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed upwards and downwards adjustable independently F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at the pallet base (1 - 10 wraps) F06 - Number of wraps at the pallet top (1 - 10 wraps) F09 - Photo cell delay for wrapping height F13 - F16 - Film tension for top and bottom wraps / up and downwards independently adjustable F62 - Ergonomic height for film replacement Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable wrapping programs F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (only up or only downwards) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with preset start and stop height F12 - Wrapping at a preset height (disabling the photoelectric sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft start cycle for applying edge protection F30 - F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm – height = 500 mm – core Ø76 mm Standard connection values: 230 V - 1PH+N+PE - 50/60 Hz Total power: 1.2 kW / 8A Optional: Gear for OPRS pre-stretch ratio of 150% / 250% / 300% possible Further systems available from stock in Ludwigsburg.

Rok výroby: 2026, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25Synthesi01, Stretch Wrapper Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film tension can be set electronically in different steps within the programs Turntable height 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage up/down speed Warning tone at wrap start and cycle end Emergency stop switch according to CE regulations Turntable always stops in the same home position Drop protection for the film carriage Push button for machine power-on, start & stop, and reset according to CE standards Ø 22 mm PARAMETERS ADJUSTABLE VIA CONTROL PANEL All function parameters adjustable via display F00 - Display lock for program modification F02 - Infinitely variable turntable speed 5-12 rpm Carriage speed up and down individually adjustable F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1-10 wraps) F06 - Number of wraps at pallet top (1-10 wraps) F09 - Delay for photocell wrap height F13-F16 - Film tension for base & top wrapping / up & down movement individually adjustable F62 - Ergonomic height for film change Film consumption display (optional) Isdpfjykub Asx Ac Astd ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL 6 wrapping programs can be saved F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (upwards or downwards only) F01 - 3 - Push button for manual functions F10 - F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a stored height (disables photocell for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Soft-start cycle for applying edge protection F30-F31 - Wrapping cycle with reinforcement and adjustable wrap count Soft start to reduce film tears at sharp pallet edges Wrapping cycle with manual or motor-driven rope forming (optional) Reinforcement cycle via push button Options available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photoelectric sensor for black products Cutting device etc. Other machines available from our Ludwigsburg stock. Images may show optional features subject to surcharge. Image similar/for illustration purposes only.

Rok výroby: 2025, prevádzkové hodiny: 1 h, stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: S23SynthesiWaage02, Exhibition machine, like new. SYNTHESI with integrated scale Pallet weighing system integrated in machine Isdsykubvjpfx Ac Aetd FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) Film carriage tension electronically controlled via control unit Film specification: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm Standard connection: 230 V - 1PH+N+PE - 50/60 Hz Options available: Ramp OPRS film carriage with PreStretch 200% Turntable 1650 mm Wrapping height up to 3500 mm TECHNICAL DETAILS: Turntable 1500 mm (optional 1650 mm) Wrapping height (including pallet): 2,200 mm Height detection by photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed, up and down Acoustic signal at wrap start and cycle end Emergency stop switch as per CE regulations Turntable always stops in the same home position Drop protection for the film carriage Push buttons for machine power-on as well as start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL All functional parameters adjustable via display: F00 - Display lock for program changes F02 - Infinitely adjustable turntable speed 5–12 rpm Carriage speed up and down can be set independently F03 - Carriage speed upwards 1.3 to 5.4 m/min F04 - Carriage speed downwards 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 – 10 wraps) F06 - Number of wraps at pallet top (1 – 10 wraps) F09 - Delay of photocell wrap height F13–F16 - Film carriage tension for base & top wrap / ascent & descent adjustable independently F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAP PROGRAMS VIA CONTROL PANEL 6 programmable wrap cycles: F01-1 – Cross wrapping (up/down) F01-2 – Simple wrap (up or down only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with predefined start and stop heights F12 – Wrapping to a programmed height (disables the height photoelectric sensor) F22/F23 – Wrap cycle for top sheet film F29 – Soft start cycle for edge protection application F30–F31 – Wrap cycle with reinforcement and adjustable wrap count Soft start to reduce film tearing on sharp pallet edges Wrap cycle with manual or powered rope forming (optional) Reinforcement cycle via push button Additional units available from stock in Ludwigsburg.

Rok výroby: 2025, prevádzkové hodiny: 1 h, stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25Lybra04, Exhibition unit - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2,200 mm Max. pallet dimensions: 1,200 x 1,200 mm Rotating arm with high-resistance ball bearing Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage speed up/down Acoustic signal at wrapping start and at end of cycle Emergency stop switch according to CE regulations Positioning aid for correct pallet placement included Safety bumper for collision protection Push-buttons for machine activation as well as start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT THE CONTROL PANEL All functional parameters adjustable via display Ijdpfx Asykubioc Aetd F02 - Steplessly adjustable turntable speed 5-12 rpm Upward and downward carriage speed can be set independently F03 - Carriage speed upwards from 1.3 to 5.4 m/min F04 - Carriage speed downwards from 1.3 to 5.4 m/min F05 - Number of wraps at pallet base (1 - 10 wraps) F06 - Number of wraps at pallet top (1 - 10 wraps) F09 - Photoelectric sensor delay for wrapping height F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS AT THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - Cross wrapping (upwards/downwards) F01 - 2 - Simple wrapping (only upwards or only downwards) F01 - 3 - Push-button for manual functions F12 - Wrapping to a stored height (with deactivation of the photoelectric sensor for height) F22 / F23 - Wrapping cycle for top sheet film F29 - Softstart cycle for applying edge protection Softstart cycle to reduce film tears on sharp pallet edges “FE” FILM CARRIAGE WITH ELECTROMAGNETIC BRAKE Via electromagnetically braked roller Film specification: max. outer diameter Ø 250 mm - core Ø76 mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 Hz Total power: 1.2 kW / 6A – 1.75 kW / 8.5 A (with PRS / PS) Optional: Also available with manual roping device. Further machines available from stock in Ludwigsburg for immediate delivery.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25SFERA06, Mobilný stretch ovinovač ATLANTA SFERA Easy *Leasing možný // od 180,51 €/mesačne pri 48-mesačnej dobe trvania a 0 € akontácie TECHNICKÉ ÚDAJE: dve bezúdržbové AGM batérie 12 V – 100 Ah zapojené do série 160 paliet na jedno nabitie – čas nabíjania: 8 - 10 hodín Vysokofrekvenčná nabíjačka s LED displejom Výška ovinovania „stroj so stožiarom (paleta vrátane)“: 2 000 mm, voliteľne až 2 400 mm Výška sa sníma svetelným snímačom alebo zadaním rozmeru na displeji Ochranný rám na núdzové zastavenie pojazdu Núdzové zastavenie v súlade s CE normami Akustický výstražný signál a výstražné svetlo pri spustení stroja Zabezpečenie proti pádu fóliového vozíka Tlačidlo pre štart/stop Funkcie stroja podľa CE noriem Ø 22 mm NASTAVITEĽNÉ PARAMETRE NA OVLÁDACOM PANELY: Všetky funkčné parametre nastaviteľné cez displej F00 – Uzamknutie displeja proti zmene programu F02 – Nastaviteľná rýchlosť pohybu stroja okolo palety až do 80 m/min Rýchlosti posuvu fóliového vozíka nahor a nadol nastaviteľné nezávisle F03 – Rýchlosť vozíka nahor od 1,3 do 5,4 m/min F04 – Rýchlosť vozíka nadol od 1,3 do 5,4 m/min F05 – Počet ovinov na spodku palety (1–10) F06 – Počet ovinov na vrchu palety (1–10) F09 – Nastavenie výšky ovinovania F13–F16 – Napnutie fólie pri spodnom a vrchnom ovine / výstupe a zostupe nastaviteľné nezávisle F17–F20 – Prednapnutie fólie pri spodnom a vrchnom ovine / výstupe a zostupe nastaviteľné nezávisle F62 – Ergonomická výška na výmenu fólie Zobrazenie spotreby fólie (voliteľné pre PRS – PS) NASTAVITEĽNÉ OVINOVACIE PROGRAMY NA OVLÁDACOM PANELY: 6 uložiteľných ovinovacích programov pre SFERA EASY F01-1 – Krížové ovinovanie (hore/dole) F01-2 – Jednoduché ovinovanie (iba hore alebo dole) F10–F11 – Ovinovací cyklus s prednastavenou štartovacou a koncovou výškou F12 – Ovinovanie do zadanej výšky (pri vypnutí svetelného snímača výšky) F21 – Ovinovací cyklus pre palety veľkých rozmerov F22/F23 – Ovinovací cyklus s krycou fóliou F29 – Softštart cyklus pre nasadenie ochrannej hrany F30–F31 – Ovinovací cyklus s vystužením a nastaviteľným počtom ovinov Softštart na redukciu trhania fólie pri ostrých hranách paliet Ovinovací cyklus s manuálnym alebo motorickým systémom tvorby šnúry (voliteľné) FÓLIOVÝ VOZÍK TYP „FM“ S MECHANICKOU BRZDOU Brzda nastaviteľná manuálne z vozíka prostredníctvom napínacej kladky Špecifikácia fólie: max. vonkajší priemer Ø 250 mm – jadro Ø 76 mm – výška 500 mm Voliteľne: stretch fólia s jadrom Ø 50 mm alebo jadrová/bezjadrová fólia Štandardné pripojenie: 230 V – 1L+N+PE – 50 Hz Voliteľné príslušenstvo: – výška ovinovania do 2 400 mm – Fóliový vozík typ „FE“ (elektromagnetická brzda) – Fóliový vozík typ „OPRS – ONE PRE STRETCH“ 200% – Fóliový vozík typ „PRS“ (POWER ROLLER STRETCH) 200% – Fóliový vozík typ „PS“ (POWER STRETCH) 120–400% Ijdjykua Sspfx Ac Astd – Automatické vytváranie šnúry na vystuženie ovinovania – Automatický systém rezania fólie na 3 pásy pre „BANDEROLL WRAPS“ – Vyhotovenie stroja pre prevádzku až do –5 °C – LÍTIUM BATERKY RELION 2 x 12 V – Automatický rezací agregát (FE, PRS & PS) Ďalšie zariadenia skladom v Ludwigsburgu. Obrázok je ilustračný.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S25NEOS05, Mobilný stretch baliaci stroj NEOS TECHNICKÉ ÚDAJE: HMI dotykový panel 7" dve bezúdržbové AGM batérie 12 V – 120 Ah zapojené do série Štandardná nabíjačka: 230 V - 1L+N+PE - 50 Hz Prevádzka 200 – 300 paliet na jedno nabitie Vysokofrekvenčná nabíjačka batérií s LED indikáciou Max. výška balenia (vrátane palety): 2 150 mm Snímanie výšky cez optický snímač alebo manuálne zadanie cez displej Bezpečnostný rám na núdzové zastavenie pohonu Núdzové tlačidlo v súlade s požiadavkami CE Zvuková signalizácia a výstražné svetlo pri štarte stroja Zabezpečenie proti pádu pre vozík fólie Tlačidlo pre funkciu Štart & Stop podľa CE noriem Ø 22 mm NASTAVITEĽNÉ BALICIE PROGRAMY NA OVLÁDACOM PANELY: F01 - 01 - Krížové balenie (hore/dole) Isdpfx Aoykua Esc Ajtd F01 - 02 - Jednoduché balenie (iba smerom hore alebo len dole) F01 - 03 - Kompletný cyklus balenia s ovinom základne v rovnakej štartovacej výške F01 - 04 - Rýchly cyklus (s obmedzeným alebo žiadnym prekrytím fólie) F01 - 05 - Vrstevný cyklus F01 - 06 - Ekonomický balicí program Softstart cyklus na aplikáciu ochrany hrán Baliaci cyklus so spevnením a nastaviteľným počtom ovínov Softstart na zníženie trhania fólie pri ostrých hranách paliet Baliaci cyklus s manuálnym alebo motorovým tvoraním šnúry (voliteľné) NASTAVITEĽNÉ PARAMETRE NA OVLÁDACOM PANELY: 99 uložiteľných baliacich programov Všetky parametre nastaviteľné cez displej F00 - Blokovanie displeja pred zmenou programu Regulovateľná rýchlosť stroja okolo palety do 90 m/min Rýchlosť vozíka hore a dole nastaviteľná nezávisle Rýchlosť vozíka hore 1,3 až 5,4 m/min Rýchlosť vozíka dole 1,3 až 5,4 m/min Počet ovínov na základni palety (1–10) Počet ovínov na vrchu palety (1–10) Nastaviteľná výška balenia palety Napínacia sila fólie – samostatne nastaviteľná pre spodný/vrchný ovínok a stúpanie/klesanie Prednatiahnutie fólie – samostatne nastaviteľné pre spodný/vrchný ovínok a stúpanie/klesanie Ergonomická výška na výmenu fólie Zobrazenie spotreby fólie (voliteľne pre PRS/PS) VOZÍK NA FÓLIU TYP “FM” S MECHANICKOU BRZDOU: Brzda nastaviteľná manuálne pomocou napínacieho valca priamo z vozíka Špecifikácia fólie: max. vonkajší priemer Ø 250 mm – jadro Ø76 mm – výška 500 mm Voliteľne: stretch fólia s jadrom Ø50 mm alebo bezjadrová fólia Štandardné pripojenie: 230 V – 1L+N+PE – 50 Hz Voliteľné príslušenstvo: – Výška balenia do 3500 mm – VOZÍK „FE“ (ELEKTROMAGNETICKÁ BRZDA) – VOZÍK „PRS“ (POWER ROLLER STRETCH) 200% – VOZÍK „PS“ (POWER STRETCH) 120–400% – Patentovaný systém „ARYA“ pre PRS/PS – automatické pridržiavanie a odrezávanie fólie s IR diaľkovým ovládaním – Manuálne tvorenie šnúry na vozíku na spevnenie ovinu – Automatická odrezávacia jednotka (FE, PRS & PS) – Vyhotovenie pre prevádzku do -5 °C (iba verzia bez HMI dotykového panela) Ďalšie zariadenia ihneď k dispozícii zo skladu Ludwigsburg Obrázok je ilustračný.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), číslo stroja/vozidla: S23SFERA05, Mobile Stretch Wrapper ATLANTA SFERA Easy TECHNICAL DETAILS: - Two maintenance-free AGM batteries 12 V – 100 Ah connected in series - 160 pallets per charge – Charging time: 8–10 hours - High-frequency battery charger with LED indicator - Wrapping height “Machine with MAST (Pallet inclusive): 2,150 mm - Height detection by photoelectric sensor or manual input via display - Safety bar for emergency stop of the drive unit - Emergency stop switch in accordance with CE regulations - Acoustic warning signal and warning light on machine start-up - Fall protection for the film carriage - Push buttons for start & stop - Machine operation in accordance with CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL: - All functional parameters adjustable via display - F00 - Display lock for program changes - F02 - Adjustable machine speed around the pallet up to 80 m/min - Carriage speed upwards and downwards independently adjustable - F03 - Carriage speed upwards from 1.3 up to 5.4 m/min - F04 - Carriage speed downwards from 1.3 up to 5.4 m/min - F05 - Number of revolutions at pallet base (1–10 revolutions) - F06 - Number of revolutions at pallet top (1–10 revolutions) - F09 - Adjustment of pallet wrapping height - F13–F16 - Film tension for base & top wraps / Up & down travel independently adjustable - F17–F20 - Film pre-stretch base & top wraps / Up & down travel independently adjustable - F62 - Ergonomic height for film change - Film consumption display (option for PRS – PS) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL: - 6 storable wrapping programs for SFERA EASY - F01-1 - Cross wrapping (upwards/downwards) - F01-2 - Simple wrapping (upwards or downwards only) - F10–F11 - Wrapping cycle with specified start and stop height - F12 - Wrapping to a stored height (with disabled photoelectric height sensor) - F21 - Wrapping cycle for pallets with large dimensions - F22/23 - Wrapping cycle for top sheet application - F29 - Soft start cycle for application of edge protection - F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps - Soft start to reduce film tearing on sharp pallet edges - Wrapping cycle with manual or motorized rope formation (optional) FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE - Brake manually adjustable via tension roller on carriage - Film specification: max. outer diameter Ø 250 mm – core Ø76 mm – height = 500 mm - Optional: Stretch film with core Ø50 mm or coreless stretch film - Standard power supply: 230 V – 1L+N+PE – 50 Hz Optional features: - Wrapping height up to 3,500 mm - FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS – ONE PRE STRETCH” 200% Itsdpjykty Dsfx Ac Aed - FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM CARRIAGE TYPE “PS” (POWER STRETCH) 120–400% - Automatic rope formation for wrap reinforcement - Automatic system for cutting the film into 3 strips for “BANDEROLL WRAPS” - Machine design for temperatures down to -5 °C - BATTERIES: LITHIUM RELION 2 x 12V Other units available from stock in Ludwigsburg. Image similar.

Rok výroby: 2026, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Funkcionalita: plne funkčný, číslo stroja/vozidla: S23NEOS06, Exhibition unit Stretch Wrapper ATLANTA NEOS ARYA system for automatic film blowing and cutting. 99 individually programmable memory slots Comes with 1 remote control – additional remotes optional Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any door) Film power stretch 120–400% Motorized pre-stretch system with infinitely variable adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film application tension electronically controlled via control unit Quick-insert IEF system for easy film roll change Film specification: Max. outer diameter Ø300 mm – Height = 500 mm – Core Ø76mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free AGM batteries 12 V – 100 Ah connected in series At least 160 pallets per charge – Charging time: 8-10 hours High-frequency battery charger with LED display Wrapping height (machine with mast incl. pallet): 2,150 mm Height detection via light sensor or display input Protective bar for emergency stop of drive Emergency stop switch in accordance with CE regulations Acoustic warning signal and warning light at machine start Fall protection for the film carriage Push button for start & stop Machine function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All functional parameters adjustable via display - Display lock for program modification - Adjustable machine speed around the pallet up to 80 m/min Carriage speed upwards and downwards independently adjustable - Carriage speed upwards from 1.3 to 5.4 m/min - Carriage speed downwards from 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Pallet wrapping height setting Itjdpfx Asyktv Sec Aod - Film application tension for base & top wrapping / ascent & descent adjustable independently - Film pre-stretch for base & top wrapping / ascent & descent adjustable independently - Ergonomic height for film replacement WRAPPING PROGRAMS ADJUSTABLE ON THE CONTROL PANEL: 99 programmable wrapping programs for SFERA EASY - Cross wrapping (upward/downward) - Simple wrapping (upward or downward only) - Wrapping cycle with preset start and stop height - Wrapping to a saved height (deactivates height light sensor) - Wrapping cycle for oversized pallets - Wrapping cycle for top sheet film - Soft start cycle for applying corner protection - Wrapping cycle with reinforcement and adjustable wrapping count Soft start for reducing film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Further units immediately available ex stock Ludwigsburg #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Rok výroby: 2025, prevádzkové hodiny: 1 h, stav: ako nová (výstavný stroj), Výstavná baliaca linka Mytho S s TP / výrez v tvare podkovy, priechodná na úrovni podlahy pre paletový vozík aj elektrickú paletovú vozíkovú (E-paletovú) myš. MAST VERZIA Ijdpfxjyktrte Ac Aotd Výška ovinovania: 2450 mm 99 programov 7" dotykový displej Fóliový vozík typ „PRS“ (Power Roller Stretch) s prednapnutím fólie 200 % (na požiadanie možnosť vyššieho alebo nižšieho prednapnutia) Otočný tanier / TP Ø 1650 mm / otvorenie 06:00 – stožiar 12:00 (voľne nastaviteľné) ARYA systém na automatické zahájenie a odstrihnutie fólie vr. infračerveného diaľkového ovládania

Rok výroby: 2014, stav: pripravené na použitie (použité), A conveyor system is available for transferring Euro pallets to warehouse automation, suitable for pallet weighing, barcode scanning, optional film wrapping, measuring, output to two discharge positions, or in case of error to a separate position, equipped with a C&C group C-ONE EXTREMA pallet wrapper. Pallet dimensions: 1200x800 mm, max. pallet weight: 1 t. Includes documentation, control cabinets, and accessories. Itodpfx Acjlcdf Do Asd

Rok výroby: 1993, stav: pripravené na použitie (použité), Paletové rozměry X/Y: 1200 mm/1200 mm, max. hmotnost palety: cca 2000 kg, max. šířka fólie: 500 mm, max. otáčky otočného stolu: 10–15 ot./min, výkon: 2,5 kW. Dokumentace je k dispozici. Prohlídka na místě je možná. Iedpfx Acsumwgxo Aotd

Rok výroby: 2022, stav: pripravené na použitie (použité), K dispozícii je plne automatický horizontálny tunelový stretch ovinovač Bang & Co na fixáciu produktov na výsekoch z vlnitej lepenky. Rýchlosť otočného kruhu: 100 ot/min, max. dopravná rýchlosť: 18 m/min, rozsah šírky kartónu: 70 mm-650 mm, min. dĺžka produktu: 200 mm, max. priemer cievky: 140 mm, max. výška cievky: 125 mm, vnútorný priemer role fólie: 38 mm, rozsah hrúbky fólie: 18 µm-40 µm. Rozmery stroja D/Š/V: cca 1600 mm/1250 mm/1650 mm, hmotnosť: cca 500 kg, prevádzkové hodiny: cca 6851 h. Dokumentácia k dispozícii. Obhliadka na mieste možná. Isdpfxoxwyvqj Ac Ajtd

Stav: pripravené na použitie (použité), Priemer otočného stola: 1500mm, max. výška palety: 2400mm, max. hmotnosť palety: 2000kg, otáčky: 8 ot/min, prednapínanie fóliového vozíka: 200%. Rozmery stroja X/Y/Z: cca 1800mm/1800mm/2650mm, hmotnosť: cca 1200kg. Obhliadka na mieste je možná. Itsdpfx Acjxrf I Io Aod

Rok výroby: 2001, stav: pripravené na použitie (použité), Fóliový materiál: LLDPE, šírka fólie: 500 mm, max. priemer role: 250 mm, max. hrúbka fólie: 35 µm, vnútorný priemer jadra role: 76 mm, max. dĺžka palety: 1675 mm, max. šírka palety: 1675 mm, max. výška palety: 2200 mm, max. hmotnosť palety: 1500 kg. Rozmery stroja X/Y/Z: cca 3000 mm/2000 mm/3200 mm, hmotnosť: cca 750 kg. Dokumentácia k dispozícii. Obhliadka na mieste možná. Itodjycigqopfx Ac Asd