Uholné systémy kúpiť použité (31)

Stav: pripravené na použitie (použité), Rok výroby: 1988, Stroj na výrobu okien Výrobca: Okoma Typ: UF1 S Rok výroby: 1988 s náradím Cedpfx Aoyk Haqolysrb

Stav: použitý, Grooving spindle: 1 unit Number of milling units: 4 units Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC-controlled, both radially and axially ----- Machine factory-refurbished by Weinig in 2024. As part of this, the control system was upgraded to Siemens S7 677 C with new membrane "Touch" panel. Equipped with the following machining units: Cross-cut saw ----- With laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm Axial adjustment via NC axis Radial adjustment pneumatically on 8 positions for edge rounding from above Bottom edge-rounding unit ----- Axial adjustment synchronized with cross-cut saw Tenoning and grooving spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool swing diameter min. 380 mm, max. 400 mm Tool clamping length 640 mm Axial adjustment via CNC axis Axial traverse stroke 580 mm Adjustment speed 100 mm/sec 1st profiling spindle (climb and conventional milling) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axial and radial adjustment via CNC axis 2nd profiling spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axial and radial adjustment via CNC axis Horizontal profiling unit, top-mounted Csdexpi Dujpfx Alyorb ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatic adjustment to 8 positions, axially and radially Vertical profiling unit, right side at machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 positions, axially and radially Additional equipment ----- CNC-controlled length stop, mounted on sliding table for lengths up to 3,500 mm, including integrated cross-cut saw positioning in the control system. Window production setup, swivels 60° to both sides Double-part package with automatic separation and transfer Climb-milling unit with window automation for sash profiling Profiling wagon for profiling narrow sash widths Air conditioning unit in control cabinet PC control NEXUS Automatic turning system Lamella conveyor, including return belt for workpieces back to operator (Technical specifications as per manufacturer – subject to change and without guarantee).

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery Crsdpfx Asvu Hghslyeb ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and thoroughly inspected before delivery. Summary of Technical Data (Please inquire for any additionally included accessories.) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, continuously adjustable horizontally > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut detection > NC length stop, mounted on slotting table included Positioning of the cross-cut saw integrated in the control system. > Length: 3,500 mm Crsdpfevu Hfqox Alyjb Pos. 2: Tenoning and slotting spindle ----- > Number of tools: variable, adjustment stepless via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Bar guide consisting of: guide rail in the stop (area of climb-cut spindle), bar support bar from above in the area of vertical profiling unit (right) and profiling spindle. Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions via pneumatic revolver > Radial adjustment: 125 mm, 8 positions via pneumatic revolver Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic revolver > Radial adjustment: 100 mm, 8 positions via pneumatic revolver > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Rebating unit for tear-free rebate cutting > Double part package > Return device for single-operator use: pivoting belt > Screen control > Tilt window facility > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original images available yet. Photos show an identical machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Stav: pripravené na použitie (použité), Rok výroby: 1993, Funkcionalita: plne funkčný, WEINIG, Type UNICONTROL 10/3, Machine No. 032-1136, Year 1993 Technical Specifications: Crosscut saw with 4-position indexed turret, laser alignment light Vertical stroke: 125 mm Speed: 2,800 rpm Spindle diameter: 40 mm Tool diameter: 350 mm Clamping length: 40 mm Horizontal stroke: 160 mm Motor: 4 kW Extraction port diameter: 80 mm UNITEC slot spindle 50 x 300 mm 3 tools Vertical stroke: 2x100 mm Speed: 3,500 rpm Spindle diameter: 50 mm Tool diameter: 300–320 mm Clamping length: 300 mm Motor: 11 kW Extraction port diameter: 140 mm UNIVAR milling spindle 50 x 285 mm (climb and counter-rotation spindle) 3 tools Vertical stroke: 2x95 mm Crodpfx Alswk U Rljysb Speed: 6,000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port diameter: 140 mm UNIVAR milling spindle 50 x 285 mm 3 tools Vertical stroke: 2x95 mm Speed: 6,000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port diameter: 140 mm Features: Minimum working width: 30 mm / Minimum working height: 30 mm Maximum working height (with stroke): 100 mm / (without stroke): 120 mm Feed motor: 1.1 kW / stepless speed adjustment: 6–12 m/min LEITZ Dufix IV-68 EURO window tooling set digital display for studio windows mechanical length stop screen control Double workpiece package return roller conveyor Machine is in good technical and visual condition, fully functional NET PRICE: EUR 7,400 + VAT Delivery: EXW Delivery time: short-term by arrangement Inspection: by appointment Errors and prior sale excepted.

Stav: dobrý (použitý), Rok výroby: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3200 mm - Minimale bearbeitbare Länge: 200 mm Crjdpfxst R T Hce Alyjb - Maximale Werkstückbreite: 200 mm - Minimale Werkstückbreite: 40 mm - Maximale Werkstückhöhe: 130 mm - Frästiefe bei max. Zapfendurchmesser Ø320 mm: 105 mm - Zapfenwagen-Vorschubgeschwindigkeit min./max.: 0/100 m/min - Profiliergeschwindigkeit min./max.: 3/15 m/min Zapfenschneiden: 1. Ablängsäge 5,5 PS (4 kW) Sägeblatt-Ø 400 mm 2. Zapfenspindel Gegenlager 50 x 620 mm 15 PS (11,3 kW) Max. Werkzeug-Ø 320 mm Achshub 575 mm Automatischer Splitterschutz 3. Zapfenspindel Gegenlager 50 x 620 mm 15 PS (11,3 kW) Max. Werkzeug-Ø 320 mm Achshub 575 mm Automatischer Splitterschutz Vertikale Positionierung mit Durchgangsachse 4. Digitale Winkelspannvorrichtung Profilieren: 5. Profilierfräse rechts Spindel 50 x 320 mm 10 PS (7,5 kW) Werkzeug-Ø 130/240 mm Achshub 280 mm Zeitverzögerter Splitterschutz bei Kalibrierung Doppelte Drehrichtung Vertikale und horizontale Positionierung mit Durchgangsachse 6. Profilierfräse rechts Spindel 50 x 320 mm 10 PS (7,5 kW) Werkzeug-Ø 130/240 mm Achshub 280 mm Vertikale und horizontale Positionierung mit Durchgangsachse 7. Profilierfräse rechts Spindel 50 x 320 mm 10 PS (7,5 kW) Werkzeug-Ø 130/240 mm Vertikale und horizontale Positionierung mit Durchgangsachse 8. Endbearbeitungsgruppe Vertikale und horizontale Positionierung mit Durchgangsachse Vorrichtung zur Flügelentnahme Hfutwt78Z 9. Untere Horizontale Nutwelle Vertikale und horizontale Positionierung mit Durchgangsachse 88,5 PS (66,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener