Píly na sklené lišty kúpiť použité (8)

Stav: použitý, Rok výroby: 2002, DVOJITÁ POKOSOVÁ PÍLA (PÍLA NA SKLENÉ LIŠTY) OMGA TRF 527 NC vrátane hviezdicového dorazu Rok výroby: 2002 Min. & max. vzdialenosť medzi agregátmi: 158 mm, 2800 mm Kapacita rezu pri 90°: 55 mm Kapacita rezu pri 45°: 40 mm Max. výška rezu: 40 mm Ijdpfjxwumqjx Afpea Výkon motora: 2 x 1,18 kW Priemer otvoru kotúča: 30 mm Priemer pílového kotúča: 220 mm Otáčky vretena: 5000 ot./min

Stav: nový, Number of motors: 2 units Working length: 2650 mm Control: manual Ruchser RU-GLS-ED 45° Glazing Bead Saw ----- Designed for paired cutting of glazing beads The RU-GLS-ED45° double glazing bead saw is manually adjustable to size. The machine is designed for paired cutting of glazing beads at a 45° cutting angle and features one fixed and one movable saw unit. The manual length adjustment is equipped with an electronic digital display. Cutting lengths from 150 mm to 2650 mm can be processed. During the cutting process, the glazing beads are clamped pneumatically from above and from the front to prevent tipping. Operation is via a safety two-handed control. Saw blade diameter: 250 mm, length: 3700 mm, width: 700 mm, voltage: 400 V. Item 1: RU-GLS-ED45° Double Glazing Bead Saw ----- With manual size adjustment, for paired cutting of glazing beads, cutting angle 45°. Manual length adjustment with electronic digital display, cutting length from 150 to 2650 mm. Pneumatic clamping from above and from the front. Safety two-handed control, saw blade diameter 250 mm, length 3700 mm, width 700 mm, voltage 400 V. ----- Base price for the above specification: on request! ----- Ex works. Packaging and shipping extra Options with additional price: ----- Item 1.1 Shim set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, subject to review of glazing beads. Depending on the number of glazing beads used, several shim sets may be required. To determine the exact quantity needed, we require profile drawings of the glazing beads to be used before order confirmation. Additional price: on request, after receipt of your glazing bead drawings. Item 1.2 Mounting device for template gauge on RU-GL for transferring measured values to the saw with pneumatic installation. Additional price: 611.00 Euro Item 1.3 Template gauge for glazing beads, total length 2550 mm, max. measuring length approx. 2450 mm. Measuring gauge made of square section with 2 fixed and 2 adjustable stops for measuring glazing bead length. Additional price: 478.00 Euro Item 1.4 Template gauge for glazing beads, total length 1500 mm, max. measuring length approx. 1430 mm. Measuring gauge made of square section with 2 fixed and 2 adjustable stops for measuring glazing bead length. Additional price: 428.00 Euro Item 1.5 Operating time switch for independent extraction system. Adjustable from 5 sec. to 3 hrs. For each saw operation, the set extraction time runs automatically. If sawing occurs again within the extraction time, the set extraction time restarts. Additional price: 702.00 Euro Item 1.6 1 set carbide-tipped saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, consisting of 1 each saw blade L6444 (right) and L6443 (left), with special 43° grind. Additional price: 576.00 Euro ----- All prices in Euro, net, plus legal VAT. Iedsxmk Dqopfx Afpsa (Technical data according to manufacturer, no guarantee!)

Stav: pripravené na použitie (použité), The OMG TRF 527 NC is a compact, precise double mitre saw ideal for applications requiring high dimensional accuracy and repeatability. Features and Specifications: - Two saw blades Ø 220 mm powered by robust 1.5 HP (1.18 kW) motors - Fixed right unit, left unit adjustable via NC control on an intuitive 7" touchscreen - Smooth-running ball-bearing guide for the adjustable unit - Simultaneous cutting of two profiles stacked vertically - Pneumatic front clamping devices for secure holding during the cut - Adjustable cutting angles for precise mitre cuts Optional equipment: extended cutting length (up to 4,000 mm), star stop for quick angle adjustment Highlighted Technical Data: - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm (also at 45°) - Cutting capacity at 90°: 55 mm - Cutting capacity at 45°: 40 mm - Max. cutting height: 40 mm - Spindle speed: 5,000 rpm - Extraction ports: 2 x Ø 80 mm - Packing weight: approx. 230 kg - Packed dimensions (L x W x H): approx. 3,345 x 600 x 1,400 mm The OMG TRF 527 NC impresses with its compact design, high cutting precision, and user-friendly controls—ideal for operations with high demands for repeat accuracy on small to medium workpieces. The machine can be inspected at any time. Shipping available. Isdpfx Aoxvqvlefpea

Stav: dobrý (použitý), Rok výroby: 1989, Počet motorov: 1 kus Pracovná dĺžka: 450–2400 mm Iodpsvnwctofx Afpea Ovládanie: manuálne - Výška rezu: 50 mm - Šírka rezu: 75 mm - Výkon motora: 0,75 kW - Doraz pre dĺžky: 450–2400 mm - Pneumatické upínacie zariadenie

Stav: nový, Number of motors: 2 units Working length: 2380 mm Control: , RUCHSER RU-GL-45° ----- Glazing Bead Saw on Sliding Work Table Designed for paired cutting of glazing beads on a sliding work table. The RU-GL glazing bead saw is mounted on a sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a carriage, manually movable. Pneumatic clamping device from above and from the side, two-hand safety operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt cover, length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter-bearings for positioning the sashes. Pos. 1: RU-GL Double Glazing Bead Saw 45° on RU-SA-3000 ----- For glazing beads up to 30 x 70 mm (W x H) !!! Mounted on sliding work table with scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw mounted on a carriage, manually movable. Pneumatic clamping device from above and from the side, two-hand safety operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt cover, length with side shelf 3300 mm, width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable counter-bearings for positioning the sashes. ----- Base price in above configuration: on request! ----- Excluding packaging and shipping as well as current material surcharge of 6% of the total price. Options at additional cost: ----- Pos. 1.1 1 set carbide saw blades for RU-GL glazing bead saw D = 200 mm, 64 teeth, consisting of 1 piece saw blade L1233 (left) and L1085 (right), with 43° special grind. Additional cost: 421.00 Euro Pos. 1.2 Mounting device for scanning gauge on RU-GL for transferring the scanning dimensions to the saw, with pneumatic installation. Additional cost: 611.00 Euro Pos. 1.3 Scanning gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm. Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length. Additional cost: 478.00 Euro Pos. 1.4 Scanning gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm. Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for scanning the glazing bead length. Additional cost: 428.00 Euro Pos. 1.5 Spacer set for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price on request, after checking the glazing beads. Depending on the number of used glazing beads, several spacer sets may be required. To determine the exact quantity, we need profile drawings of the glazing beads before order confirmation. Additional cost: on request, after submission of your glazing bead drawings Isdpjxmkz Nsfx Afpsa Pos. 1.6 Operating time switch for independent extraction system. Adjustable from 5 sec. to 3 hours. For each sawing operation, the preset time is automatically extracted. If sawing occurs again within the extraction time, the preset extraction time restarts from the beginning. Additional cost: 702.00 Euro ----- Total price ...

Stav: použitý, Rok výroby: 2017, Number of motors: 2x 1.2 kW each Working length: 2800 mm Control system: yes 0 OMGA Double Mitre Sash Bar Saw Model TRF 527 NC CE ----- Sale on behalf of customer, ex-works customer location. Machine was in use until the end, now at customer’s warehouse. Technical manufacturer’s description: Double mitre saw for the simultaneous cutting of two sash bars. The right saw unit is fixed, while the left unit is adjusted via positioning control. Features of the positioning control: - Monochrome graphic display 240 x 64 dpi - Display of 30 characters over 8 lines - Keyboard with 28 function keys - FN key for function interruption - Diagnostics and error messages - Language selection: IT, DE, EN, ES, FR, and FI - 10,000 memory lines, split into 999 cycles, max. 99 lines per cycle - RS 232 interface - Input of dimensions manually or via USB interface - 3 correction values each for left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with circulation ball bushings and runs on hardened steel shafts. Both units are fitted with supports allowing simultaneous cutting of 2 sash bars. For cutting larger cross-sections, the upper support can be removed. After cutting, the pneumatic clamping cylinders automatically swivel aside to facilitate loading and unloading of the machine. Machine equipment: - Fixed right-hand saw unit - Swivelling clamping device - Positioning control for TRF 527 NC CE - Maintenance unit - Central support - Carbide-tipped saw blades, Ø 220 mm - Two-hand safety control - Intermediate support for simultaneous cutting of 2 sash bars - Pneumatic lift for saw units - Motor protective switch - Pressure monitor - Undervoltage release - Overload switch - Tool kit - 2 pcs. angle-stop with 4 positions Technical data: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm Iodpfx Afsxmamnopsa - Weight: 217 kg ----- Price for the above-mentioned machine on request! ----- (Technical data provided by manufacturer – no liability assumed!) All prices quoted are net plus legally applicable VAT.

Stav: nový, Rok výroby: 2025, Počet motorov: 2 kusy Pracovná dĺžka: 3000 mm Ovládanie: áno/CNC Nakladacie rozmery D x Š x V: 4000 x 1500 x 1500 mm Hmotnosť: 800 kg HECHT dvojhlavová pokosová píla Exenso DS350E - 3000 mm ----- Pre drevené okenné lišty, priečky, profilové lišty, hliníkové lišty a pod. Poz. 1.1 Kat. číslo 942.5103 1 ks HECHT Exenso DS350E - Pracovná dĺžka 3000 mm - Uhol natáčania: 22,5° (vnútorný) až 135° (vonkajší) - Pravá hlava pojazdná - Upínanie pílového kotúča Ø 350 mm - Vrátane 1 ks stredovej opory - Upínanie agregátov pneumatikou - Polohovacie riadenie Exenso DS3 s 15" dotykovým displejom v prachotesnom monitorovom boxe - 3-osé riadenie, 1 pozdĺžna os a 2 kyvné osi - Zadávanie údajov o reze ručne - Spracovanie údajov z rezacieho zoznamu (súbor podľa špecifikácie) - Spracovanie údajov z meracej tyče (bezdrôtový posuvný merací prístroj GMF) - Ethernetový port 10/100 (TCP/IP) - USB rozhranie - Vrátane rozvádzača, motora a softvérových licencií Poz. 1.2 Kat. číslo 723.0121 2 ks DS pílový kotúč na drevo Šikmý/šikmý/plochý zub - pozitívny Poz. 1.3 Kat. číslo 942.5236 2 sady DS upínania obrobku kombinované Kombinované upínanie obrobku pozostáva z: Kyvného upínača pneumatického - pre upínanie materiálu zhora (voľný prístup k pracovnému stolu) Horizontálneho upínača pneumatického - protirotujúci upínací valec s pritlačnou doskou Upínače je možné ovládať jednotlivo cez riadiaci systém pílky Upínací cyklus možno regulovať cez riadiaci systém Vrátane bezpečnostného predpätia Obsah balenia pri 2 sadách: - 2 ks (vľavo/vpravo) vertikálne kyvné upínače - 2 ks (vľavo/vpravo) horizontálne upínače Poz. 1.4 Kat. číslo 942.5997 DS podávacie zariadenie pneumatické Poz. 1.5 Kat. číslo 945.2007 Balenie DS350 (prepravný rám) ----- Celková cena v tejto konfigurácii zo závodu - na vyžiadanie! ----- ALTERNATÍVNE možnosti, ceny na vyžiadanie! ----- Na horizontálne upínanie zvyškových kusov pri tupých okenných lištách namiesto 2. sady Poz. 1.3 943.5236 DS upínanie obrobku kombinované! Poz. 2.1 Kat. číslo 942.5201 ES / DS upínanie obrobku spredu - 2 ks protirotujúcich upínacích valcov - 2 ks držiakov valcov s upínacou pákou ----- Pri falcovaných okenných lištách, namiesto štandardných platní bez drážok: Poz. 2.2 Kat. číslo 942.5241 DS350 stôl s drážkami podľa zákazníckeho vzoru Namontované stoly budú vyfrézované podľa zákazníckej výkresovej dokumentácie Zašlite, prosím, všetky profilové výkresy, ktoré majú byť rezané (pdf, dxf alebo fyzická vzorka) ----- Ak je potrebné píliť aj hliník: Poz. 2.3 Kat. číslo 942.5203 DS podávacie zariadenie hydropneumatické (namiesto pneumatického podávacieho valca) ----- DOPLNKOVÉ príslušenstvo, za príplatok na vyžiadanie: ----- Poz. 2.4 Kat. číslo 942.5237 DS softvér "Nadmerná dĺžka" (nasledujúce kroky musia byť potvrdené) Iedpfx Ajvzt D Tsfpoa Riadenie procesu vrátane hardvéru. Po zadaní rozmeru rezu > max. dĺžka rezu zariadenia je rez vykonaný postupne (ľavý agregát reže, pravý agregát posúva materiál a reže podľa rozmeru). Poz. 2.5 Kat. číslo 944.1023 GMF posuvné meradlo 3000 mm kompletná sada (1500 mm + predĺženie 1500 mm) vrátane...

Stav: použitý, Rok výroby: 2018, Počet motorov: 1 kus Pracovná dĺžka: 2500 mm Ovládanie: nie Jednostranná píla na zasklievacie lišty Hecht ES 350 Pneumatický výkyv proti pevným dorazom. 45º/ 90º/ 135º s pneumatickým posuvom pílového kotúča pneumatický výkyv cez manuálny výkyvný doraz s nohou stroja, pneumatické upínanie Pílový kotúč HM 350 x 3,0/2,2/30 Z 100 Rozmery stojana: dĺžka 700 mm, hĺbka 1.600 mm, výška 1.500 mm Dotykový doraz 1,5 m Podložka 1,5 m s podperou Iedsvpr N Rjpfx Afpsa Dotykový doraz 3 m Predĺženie podložky z 1,5 m na 3 m s podperou Vkladacie dosky stola s drážkami pre preložené zasklievacie lišty HECHT ASB manuálny dĺžkový doraz s digitálnym displejom, 2500 mm S odsávacím zariadením (technické údaje podľa výrobcu – bez záruky!)