Chladený náves

ACKERMANN-FRUEHAUF 2-Achs*11,8m*gelenkt*LBW*Frigoblock*Liftachse

Stav: použitý, maximálna hmotnosť nákladu: 19 880 kg, celková hmotnosť: 29 000 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 06/2013, dĺžka ložného priestoru: 11 700 mm, šírka ložného priestoru: 2 500 mm, výška ložného priestoru: 2 250 mm, objem nakladacieho priestoru: 66 m³, celková šírka: 2 660 mm, celková výška: 3 760 mm, Rok výroby: 2013, Výbava: ABS, * Tridec riadenie * Zdvihacia náprava * Nápravy Mercedes Benz Itodsw Szulspfx Aqvsg * Plne vzduchové odpruženie * Kotúčové brzdy * Chladiaca jednotka Frigoblock * Zadné výklopné čelo Dautel 2 000 kg * Pneumatiky 385/65 R 22.5 60-80 %

Stav: pripravené na použitie (použité), Rok výroby: 1970, Funkcionalita: plne funkčný, dĺžka hriadeľa pod hlavou: 30 mm, dĺžka sekcie (max.): 52 mm, Dvojitý lis Hilgeland CH1 KHA Rok výroby 1970 Itodpfxjur N Dao Aqveg Stroj je ihned připraven k provozu!

Stav: použitý, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Itsdsuz If Nspfx Aqveg Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Clamping length/tool length: max. 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swivelling roll spindle for through-feed thread rolling - Four-stage roll spindle speed adjustment via gearbox - Hydraulic unit integrated in machine bed - Operating manual with electrical diagram Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, which have the same pitch as the workpiece, form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length is equal to the width of the thread dies. Through-feed rolling: Used when the thread length is greater than the thread die width. Through-feed dies have three sections – the entry, calibration, and exit zones. Knurling rolls have no pitch and are set at the helix angle of the profile to be rolled. Helical rolls differ from knurling rolls in that their profile includes a pitch. The sum of the pitch angle and the swivel angle results in the helix angle of the workpiece.

Stav: generálne opravený (použitý), Rok výroby: 2023, SACMA SP22 PROGRESÍVNY STUDENÝ LIS 2 MATRICE, 2 RAZNÍKY Kompletne repasovaný - Ako nový (v súlade s normami CE) S nainštalovanou polopriebežnou skupinou ROZSAH PRODUKCIE: Priemer: 10x100 Typ stroja: 2 matrice – 2 údery transferový header Rozsah priemerov: 10 mm Počet matíc: 2 Počet staníc (vrátane odrezávania): 3 Dĺžka strihu: 110 mm Dĺžka drieku pod hlavou: 100 mm Výkon – kusov/min: 170 Iodpfxjpgw Uge Aqvjtg

Stav: nový, Bernardo pásová brúska MS 150 x 2000 S-2 Rozmery pásu: 150 x 2000 mm Rýchlosť pásu: 14,5 / 29 m/s Priemer x šírka kontaktného kotúča: 200 / 155 mm Plošina na plošné brúsenie: 460 x 150 mm Priemer odsávacieho pripojenia: 100 mm Itjdpsd Rw Rhefx Aqveg Menovitý výkon motora S1 100%: 2,1 / 2,8 kW Príkon motora S6 40%: 2,8 / 3,6 kW Napätie: 400 V Dĺžka: 1080 mm Šírka: 520 mm Výška: 1000 mm Hmotnosť cca: 85 kg

Stav: takmer ako nový (použitý), Rok výroby: 2022, číslo stroja/vozidla: 220287, NS60E Nakashimada dvojité raziace lisy z roku 2022, ako nové, dĺžka rezu 95 mm, priemer drôtu 7 mm Isdswiwqxepfx Aqvstg

Stav: použitý, dĺžka hriadeľa pod hlavou: 80 mm, dĺžka závitu: 58 mm, Rovinné závitovací stroje GW 63 / GW 63SX, různé roky výroby, ve velmi dobrém stavu, špičková elektroinstalace. EW Menn včetně vibračního podavače, Skako, skluzový podavač. Iedpfxowkqvqo Aqvjtg

Rok výroby: 2026, stav: nový, Funkcionalita: plne funkčný, celková hmotnosť: 120 kg, celková dĺžka: 900 mm, celková šírka: 1 500 mm, celková výška: 2 050 mm, vstupné napätie: 230 V, laserový výkon: 30 W, vlnová dĺžka lasera: 1 064 nm, opakovacia presnosť: 0,01 mm, typ laseru: vláknový laser, Výbava: USB port, osvetlenie, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is designed for a very wide range of marking tasks. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, using a laser for permanent marking has become indispensable. Itjdpfx Aqeyxccrsvog The powerful laser software enables easy creation of texts, numbers, 2D codes, QR codes, and logos with just a few clicks—even without extensive programming knowledge. The software can automatically increment serial and article numbers after prior configuration. Additionally, it can extract data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side-mounted arms for marking long components, a motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser: 30 W, 20 W, or 50 watt • Laser class 1 • Wavelength 1064 nm • Marking field size: 150 x 150 mm (optionally larger) • Marking software: EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (incl. activated carbon filter) • Pilot laser (simple preview, contour preview) • Focus finder (easy focus setting) • Signal tower for operating status indication • Max. component height approx. 300 mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • IPS PCAP touch screen and keyboard shelf, height-adjustable • Frame made from aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230 V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stav: použitý, Rok výroby: 1997, číslo stroja/vozidla: 707, Použitý valcovací stroj na závity Ingramatic RP21 RV, rok výroby 1997. Ijdpowiu Afjfx Aqvetg

Stav: použitý, Rok výroby: 1996, RA1019 Transnorm curve conveyors are frequently used in intralogistics for in-plant transport of piece goods and have become indispensable in modern distribution centers. They impress with their performance and reliability. Thanks to a low-tension drive across the entire belt width, long operating times are no problem. Tapered drums and a specially developed belt guiding system ensure maximum running smoothness. For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team – Your specialist and contact partner for intralogistics For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics. Itodpfjk Aa Acox Aqvog