Radiálne vŕtačky

AIRCRAFT OPTIradial 5

Stav: dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: Hsdpfx Ajrmkfnon Isp - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: použitý, Rok výroby: 1990, číslo stroja/vozidla: 2316-3, Cat. No. 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Spindle taper: MK 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. distance spindle – table: 300 / 700 mm - Drilling radius min / max: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement approx.: W 1300 x H 2800 x D 2300 mm - Weight approx.: 1500 kg Hjdsu Et Nbjpfx An Ijp Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots (vertical) on the left side of the machine

Stav: dobrý (použitý), Rok výroby: 2007, Ovládanie 840 D os X: 2500 mm os Y: 2500 mm os Z: 1700 mm Ovládanie - Siemens Sinumerik 840 D max. hmotnosť obrobku – 6000 kg Priemer vretena – 130 mm Výsun pinoly – 700 mm Upínanie nástroja – ISO 50 DIN 69871 - AD max. krútiaci moment na vretenu – 1847 Nm Hedowzyp Ujpfx An Iop Celkový príkon – 65 kW Hmotnosť stroja cca 45 t Potrebný priestor cca 10,9 x 9,3 x 5,7 m

Stav: nový, Stroj je dodávaný bez podstavca. Podstavec BF3 Deluxe je možné zakúpiť samostatne pod katalógovým číslom 56-1017. Technické údaje: Vŕtací výkon v oceli: 32 mm Vŕtací výkon v liatine: 40 mm Max. priemer čelného frézovacieho nástroja: 80 mm Vyloženie: 220 mm Otáčky vretena: (12) 75 – 3200 ot./min Upínanie vretena: MK4 Hedpov N Uyrsfx An Ijp Zdvih pinoly: 120 mm Podávanie pinoly: (3) 0,10 / 0,18 / 0,26 mm/ot. Veľkosť stola: 800 x 240 mm Pojezd (x / y): 555 x 205 mm Nakláňanie frézovacej hlavy: -60° až +60° Vzdialenosť vreteno – stôl: 95 – 485 mm Výškové nastavenie frézovacej hlavy: 390 mm Veľkosť T-drážky: 14 mm Motor pre zdvih: 90 W Výkon motora S1 (100 %): 1,1 / 1,5 kW (400 V) Príkon motora S6 (40 %): 1,5 / 2,2 kW (400 V) Rozmery stroja: 1140 x 970 x 1460 mm Približná hmotnosť: 322 kg Dodávané príslušenstvo: - 3-osý digitálny odpočet ES-12 V s LCD displejom - Rýchloupínacie vŕtacie skľučovadlo 3 – 16 mm / B16 - Vretenový trn MK4 / B16 - Závitová ťahová tyč M16 - Redukčná púzdro MK4 / 3 - Kombinovaný čapový frézovací trn MK4 / 27 mm - Výškovo nastaviteľný bezpečnostný kryt - Automatický prítlak pinoly - Zdvihový motor pre frézovaciu hlavu - LED pracovné osvetlenie stroja - Digitálny ukazovateľ zdvihu pinoly - Závitořezné zariadenie - Lamelový bezpečnostný kryt - Pozdĺžna meracia stupnica - Ovládacie náradie Bez podstavca

Stav: nový, Rok výroby: 2026, vŕtacia kapacita: 40 mm, hĺbka hrdla: 1 220 mm, otáčky vretena (min.): 110 ot./min, maximálna rýchlosť vretena: 2 900 ot./min, celková hmotnosť: 1 710 kg, zdvih vretena: 200 mm, držiak vretena: MK 4, Drilling capacity in St 60: 40 mm Drilling capacity in GG 20: 40 mm Thread cutting (St 60 / GG 20): M 27 / M 36 Tool holder, short spindle: Morse taper 4 (MK 4) Spindle-to-column clearance, min. - max. (centre spindle/column): approx. 210 - 1220 mm Clamping surface, machine table: approx. 1200 x 510 mm T-slots in machine table (number x width): 3 x 18 mm Distance spindle to table, min. - max.: approx. 375 - 675 mm Hodpfotzkmbex An Ijp Distance spindle to base plate (option), min. - max.: approx. 1075 – 1375 mm Spindle stroke: approx. 200 mm Feeds (4 steps): 0.08 / 0.1 / 0.2 / 0.3 mm/rev Main spindle speed range, stepless: 110 - 2900 rpm Dimensions (height x width x depth): approx. 2500 x 1200 x 1710 mm Net weight: approx. 1710 kg Main spindle drive motor power, 400 V, 50 Hz: approx. 2.2 / 4.0 kW

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Danumeric 440, fully overhauled and digitized in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Traverse path of arm: 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) on rear machine base • 2 T-slots (18 mm) on left machine base • Tapping attachment • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge – table top min.: 70 mm, max.: 680 mm Distance spindle lower edge – floor min.: 970 mm, max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity (solid): St 60 Ø40 mm, GG 22 Ø50 mm Hodpfx Ansu Dg D Aj Ijp Thread cutting: St 60 M36, GG 22 M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Torque: max. 250 Nm, constant from 15–2,000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W-axis): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axes over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight of Danumeric 440 (without packaging) with 1800 x 600 mm table: 2,800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: Cartesian or polar; absolute or incremental readings Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tooling suggestions based on machining type, material-dependent cutting data suggestions Tool management: Maximum 500 tools Subroutines: Yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable targeted entry functions Zero point determination: Cycles for determination of zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection on round parts via probing reference edges/faces Test-graphic: Graphic display of drilling patterns Data interfaces: USB

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Hodpfxsvv Spkj An Iep Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: použitý, Rok výroby: 2008, x-dráha 2500 mm y-dráha 2500 mm z-dráha 1700 mm Ovládanie Siemens Sinumerik 840 D max. hmotnosť obrobku 6000 kg Hjdpfxew N S E Ne An Isp Priemer vretena 130 mm Zdvih pinoly 700 mm Upínanie nástroja ISO 50 DIN 69871 - AD max. krútiaci moment na vretene 1847 Nm Celkový príkon 65 kW Hmotnosť stroja cca 45 t Potrebný priestor cca 10,9 x 9,3 x 5,7 m Pracovný stôl -Upínacia plocha 2500 x 2000 mm -Výška stola nad podlahou 800 mm Posuvová rýchlosť -os x: 0,5 až 10000 mm/min -os y: 0,5 až 10000 mm/min -os z: 0,5 až 10000 mm/min -Rýchloposuv (x/y/z): 25 / 25 / 25 m/min -max. posuvová sila (x/y/z): 28000 / 27000 / 28000 N Otáčky vretena v 1/min -Stupeň prevodovky 1: 6 až 1004 ot./min -Stupeň prevodovky 2: 950 až 4000 ot./min Výbava/príslušenstvo: -cca. 30 ks držiakov nástrojov SK 50 -1 merací dotykový snímač -Chladiace zariadenie/pásový papierový filter a odstraňovač triesok -Chladič -Odťah olejovej hmly -Fixátory -Technická dokumentácia

Stav: dobrý (použitý), Rok výroby: 1994, číslo stroja/vozidla: 133120, Ponuka 24506 Technické údaje: - Vŕtací výkon do plného ocele ST 60: 35 mm - Vŕtací výkon do liatiny GG 25: 42 mm - Rezanie závitov v ST 60: M 30 - Rezanie závitov v GG 25: M 36 - Upnutie vŕtacej vretena: MK 4 - Zdvih pinoly: 170 mm Hjdpfx Aowndydjn Ijp - Otáčky vŕtacieho vretena plynulo nastaviteľné: 20 - 3200 ot./min - Posuv vŕtania plynulo nastaviteľný: 0,02 - 0,70 mm/otáčka - Vzdialenosť od stĺpa k vretenu, min./max.: cca 490 / 1240 mm - Uhol natočenia: 330° - Rozmer stola: 1200 x 620 mm - Výška stola: 900 mm - Motorické výškové nastavenie / zdvih stĺpa: 450 mm - Hydraulické upínanie stĺpa a ramena - T-drážky vertikálne na ľavej strane stroja - Zariadenie na chladenie - Pohon: 400 V / 5,0 kW - Potrebná plocha (približne): šírka 1500 x výška 2600 x hĺbka 1700 - 2500 mm - Hmotnosť (približne): 2100 kg

Stav: dobrý (použitý), Rok výroby: 1988, High-Speed Radial Drilling Machine Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC Control Year of Manufacture: 1988 APPLICATION AREAS – DRILLING Drilling capacity (steel): 40 mm Arm reach (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of speeds: 2 Tool holder: MT 4 SPECIFICATIONS Table surface: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Hodpsikvcasfx An Iep Mains voltage: 400 V Mains frequency: 50 Hz DIMENSIONS / WEIGHT Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Drive power: 6 kW