Vstrekovací stroj

Arburg 1500 T 2000 - 400

Stav: veľmi dobrý (použitý), The machine is a 2007 model and has only operated for 5,000 hours. It was used exclusively for testing casting moulds, which explains the low operating hours. The machine can be connected to power for inspection and testing at its location in Germany - 64850 Schaafheim. For further information, please get in touch. In addition to the machine itself, plastic granulate as well as additional accessories and spare parts (see pictures) are also available for purchase. ENGEL Victory 1050/220 Power, year of manufacture 2007. Location: The machine is located in 64850 Schaafheim (Germany), fully assembled. Condition: The machine is ready for power-up and testing. Overall Dimensions: Length: approx. 6,950 mm Width: approx. 1,800 mm Height: approx. 2,250 mm Weight: approx. 12,900 kg Platen & Mould Data: Clamping plates: approx. 820 × 820 mm Tie bar spacing: approx. 570 × 570 mm Minimum mould height: 250 mm Maximum mould height: 700 mm Daylight opening: 950 mm Center bore: Ø 125 mm Technical Main Data: Feature | Description Manufacturer: ENGEL AUSTRIA GmbH Machine type: Victory 1050/220 Power Year of manufacture: 2007 Machine no.: 167023 Control system: ENGEL CC control (touch panel, graphical user interface) Clamping force: 2,200 kN (220 t) Screw diameter: suitable for HP 1 nozzle (Ø 50–120 mm) Injection pressure: up to 3,000 bar at 400 °C Injection volume (PS): up to 1,600 cm³/s Gbsdpfx Aexldtiodrjh The machine can be inspected and tested by appointment at our site in Schaafheim. Best regards

Rok výroby: 2008, Stav: pripravené na použitie (použité), Lisovacia sila: 1100 kN, Priemer slimáka: 35 mm, Hmotnosť vstrekovania: 140 g, Zdvihový objem: 154 cm³, Vstrekovací tlak: 2429 bar, Max. teplota valca: 375°C, Hmotnosť: cca 8000 kg, Ovládanie: MC 5 3.0, Prevádzkové hodiny: 25 271 h, Hodiny čerpadla: 29 098 h. Vrátane lineárneho robota KM LRX 150, dráha pohybu X/Y/Z: 900 mm/1200 mm/3000 mm, nosnosť: 15 kg. Dokumentácia je k dispozícii. Obhliadka na mieste je možná. Gsdpfx Adjwz N Tverebh

Stav: použitý, Rok výroby: 2014, upínacia sila: 270 kN, zdvihový objem: 653 cm³, vstrekovací tlak: 2 041 lišta, celková hmotnosť: 12 500 kg, motohodiny: 35 000 h, priemer skrutkového dopravníka: 55 mm, Dodacie podmienky: zo skladu Dodacia lehota: podľa dohody Platobné podmienky: 100 % pred prevzatím stroja, čistá suma Gedpjw U Et Defx Adrjbh

Rok výroby: 1999, Stav: pripravené na použitie (použité), Inštalačná výška min./max.: 250 mm/750 mm, zdvih otvárania: 500 mm, upínacia sila: 1500 kN, priemer slimáka: 40 mm, vzdialenosť medzi stĺpmi: 420 mm, vstrekovací objem: 182 cm³, prevádzkové hodiny: 98 234 h. Dokumentácia je k dispozícii. Prehliadka na mieste je možná. Gbsdpst E Trhofx Adrjh

Stav: pripravené na použitie (použité), Rok výroby: 2016, prevádzkové hodiny: 13 361 h, upínacia sila: 1 600 kN, priemer skrutky: 45 mm, výrobca ovládačov: ARBURG, This Arburg 520S-1500-400 injection moulding machine was manufactured in 2016. It features a clamping force of 1,600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control with 15-inch touchscreen enhances user operation. Take the opportunity and purchase this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled clamping force build-up; advanced two-stage clamping programme • Hydraulic, servo-driven ejector on moving platen • Screw diameter: 45 mm (without nozzle) • Highly wear-resistant execution; sintered metal non-return ring; CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature-resistant thermoplastics • Technology level 2: servo-driven dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control with touchscreen process editor Gedpoyg I Egsfx Adrsbh • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1-6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host system integration) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • Electrical: 400 V / 50 Hz, with neutral conductor • Operating hours: 13,361 Additional equipment • None included in the listing • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Rok výroby: 2011, Stav: pripravené na použitie (použité), K dispozícii sú dve vstrekovacie stroje Arburg vrátane temperačných zariadení, dopravníkov, žeriavov a robota. 1) Arburg Allrounder 170S 180-30, rok výroby: 2011, rozstup stĺpov: 220 mm, nosnosť žeriava: 350 kg, celkový príkon: 50 kW, automatické hodiny: 38 396 h, hodinové nasávanie: 42 595 h, hmotnosť: cca 1 750 kg. Vrátane Tooltemp TT 157E, Tooltemp 157Es, žeriava a dopravníka FA-LU600/LA1400xB300. 2) Arburg Allrounder 170S 180-30, rok výroby: 2011, rozstup stĺpov: 220 mm, nosnosť žeriava: 350 kg, celkový príkon: 50 kW, automatické hodiny: 44 090 h, hodinové nasávanie: 49 127 h, hmotnosť: cca 1 750 kg. Vrátane Tooltemp TT 157E, Tooltemp 157Es, žeriava a dopravníka FA-LU600/LA1400xB300. Dokumentácia je k dispozícii. Obhliadka na mieste možná. Predaj aj jednotlivo možný. Gbedpoyiflysfx Adrsh

Stav: pripravené na použitie (použité), Rok výroby: 2016, prevádzkové hodiny: 9 171 h, upínacia sila: 1 600 kN, priemer skrutky: 45 mm, výrobca ovládačov: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control with 15-inch touchscreen enhances user convenience. Take advantage of this opportunity to purchase this hydraulic injection moulding machine Arburg 520S-1500-400. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended closing program with 2 stages • Hydraulically and servo-controlled ejector on the moving platen • Injection/plasticising unit: • Screw diameter: 45 mm (without nozzle) • High-wear-resistant version • Sintered metal non-return ring • CrN coating on screw and non-return ring • Suitable for abrasive, corrosive, and high-temperature resistant thermoplastics • Technology level 2 – servo-controlled dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circuit with additional cooling and filtration • SELOGICA direct control: • Touchscreen operation with process editor • 15-inch display (38.1 cm) • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (for MES/host computer integration) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Accessories: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow meters • 400 V / 50 Hz, with neutral conductor • Operating hours: 9,171 Gbjdpfx Adjyg I Ihjrsh Additional equipment • Not included in the listing • Note: The machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation system is included.