Stroj na olepovanie hrán

Biesse AKRON 1400

BIESSE Edge Banding Machine AKRON 1440-A
Automatic single-sided edge banding machines for bonding and processing straight edges with roll material (melamine, PVC, ABS, veneer) and strip material (solid wood, resopal, sliced veneer, etc.)
• NC control with touch display
• Automatic startup of unit motors
• Direct selection for second pass
• Operating data acquisition
• Software-guided maintenance

TECHNICAL DATA
Workpiece thickness: 10–60mm
Workpiece thickness with MFU unit (profile-dependent): 10–35/60 mm
Edge height: 14–64mm
Fsdpfxsxzb Iio Acxjfw
Edge thickness, roll material: 0.4–3mm
Edge thickness, strip material (*): 0.4–10 (12)mm
Workpiece overhang: 25mm
Minimum panel length: 140mm
Minimum width (at 140mm length): 85mm
Minimum width (at 250mm length): 50mm
Feed speed: 12 m/min
Extraction*: 8x connection Ø100mm
Compressed air connection: 7 bar
Glue pot capacity: approx. 2 kg
* Depending on chosen units.

- GLUING UNIT VC-511
Applies hot-melt adhesive to the workpiece, feeds the edging to the workpiece, automatically cuts it from the roll, and presses it in place, ensuring perfect positioning.

- END TRIMMING UNIT IN-801
For trimming the front and rear excess edging at 0° to 15° angles.

- DUAL-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E
For corner rounding and profile milling of synthetic workpiece edges up to a max. thickness of 3 mm.

JOINTING UNIT RT02
Joints the workpiece before adhesive application.
With 2 high-frequency motors, 1.8 kW each, at 12,000 rpm.

SCRAPER UNIT RB02
For finishing PVC/ABS thick edges.

FLAT SCRAPER RC02
Unit for removing excess glue at the joint area between the edge and the panel. Equipped with tracing rollers and a flat knife with position control.

BUFFING UNIT SZ02
For cleaning and polishing the workpiece edge with cloth buffing wheels. The unit automatically adapts to workpiece thickness.

ANTI-ADHESIVE SPRAY UNIT ADZ02
Precise application of anti-adhesive thanks to injectors activated by numerical control.

KIT PRO-GLUE
The PRO-GLUE kit consists of the following components:
• TEKNO-GLUE system for optimal glue application via:
- controlled glue roller tracing
- automatic disengagement in case of feed stop
- automatic ON/OFF of the gluing part
REVERSE system for switching the glue roller to forward or reverse rotation

Electrical and mechanical pre-installation for use of special glue pots for POLYURETHANE glue on EVA-operated machines.

NC axis for fine milling unit
Kit for automatic setting of tracing rollers and tools according to edge type/thickness. Adjustment via the controller.
Pair of multi-profile cutters for fine milling: bevel milling 25 degrees, R=2 mm + R=1 mm, and straight profile for solid wood.

NC axis for profile milling unit
Kit for automatic adjustment of the tracer according to edge thickness. Adjustment via controller. Option for corner-only processing.

NC axis for scraper unit
Kit for automatic setting of tracing rollers and scraper tools according to edge type/thickness. Adjustment via controller.

Inzerát bol automaticky preložený. Chyby v preklade sú možné.