Viacmateriálový vstrekovací stroj

ENGEL ES650H/200W-200HL-2F

Stav: pripravené na použitie (použité), Rok výroby: 2000, prevádzkové hodiny: 63 929 h, upínacia sila: 2 000 kN, výrobca ovládačov: ENGEL, model regulátora: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, tie bar spacing of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with two injection units, hydraulic locking system, and rotary table control, it ensures precise and efficient operation. If you are looking for a high-quality injection molding machine, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for further information. • Condition: Well-maintained and serviced • Clamping unit: • Max. mold weight: 1500 kg • Total weight: 3000 kg • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (open): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Retraction force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • Number of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection Unit 1 (650H): Duodjyf Htyspfx Adyjp • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle opening: 15 mm • Installed pump: 30 / 12.3 kW • Injection Unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Installed pump: ~6.8 kW • Controls and Functions: • SPC (Statistical Process Control): Yes • Printer interface: Yes • 2nd injection cylinder: Yes • Mold monitoring: No • Special programs: Yes Additional Equipment • Part removal device (robot): ERC 23/1-E • Travel paths: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hotrunner control: 18 zones • Mold sensors: p-z-t-σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Djdpethd Shsfx Adyjup Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: pripravené na použitie (použité), Rok výroby: 2004, prevádzkové hodiny: 96 194 h, upínacia sila: 2 000 kN, priemer skrutky: 40 mm, vstrekovacia hmotnosť: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2,000 kN and platen size of 920 x 760 mm. The machine is equipped with a two-component system with screw diameters of 40 mm and 25 mm, as well as an ERC 23/1-E robotic system for enhanced automation. Ideally suited for precise hydraulic injection molding applications. Please contact us for further information about this machine. • Configuration: 2K (Two-component injection molding machine) • Clamping Unit: • Platen dimensions (H x V): 920 x 760 mm • Min. mold height: 500 mm • Opening stroke: 750 mm • Max. daylight (distance between platens): 1,150 mm • Max. mold weight: 3,000 kg (1,500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection Unit 1 (Primary – 650H): • Screw diameter: 40 mm • Injection pressure: 1,946 bar • Shot volume (overflown): 251 cc • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm Dodpfxsyfrb Ns Adyeup • Injection Unit 2 (Secondary – 200W): • Screw diameter: 25 mm • Injection pressure: 2,089 bar • Shot volume (overflown): 69 cc • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional Features • Robot system: ERC 23/1-E linear robot • X-axis travel: 500 mm • Y-axis travel: 1,000 mm • Z-axis travel: 1,600 mm • Hot runner controller: 16 zones

Stav: pripravené na použitie (použité), Rok výroby: 2001, prevádzkové hodiny: 98 780 h, upínacia sila: 2 000 kN, celková hmotnosť: 12 200 kg, výrobca ovládačov: ENGEL, model regulátora: CC100, This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2001. It features a clamping force of 2,000 kN, a mold opening stroke of 700 mm, and tie bar spacing of 920 x 750 mm. The machine is equipped with two injection units, screw diameters of 40 mm and 25 mm, and rotary table control. Take advantage of this opportunity to purchase the hydraulic injection molding machine Engel ES650H/200W-200HL-2F. Contact us for more information regarding this machine. • Clamping Unit • Mold weight (Mold): 1,500 kg • Total moving weight: 3,000 kg • Minimum mold height: 550 mm • Mold opening stroke: 700 mm • Tie bar spacing (H × V): 920 × 750 mm • Platen size: 1,250 mm • Ejector stroke: 150 mm Duedoyf H Nnjpfx Adysp • Ejector force: 61 kN • Center ring diameter A side: 110 mm • Center ring diameter B side: 90 mm • Clamping system: Hydraulic / Pneumatic • Core pull control: Yes • Number of cores: 4 (A side) • Rotary table control: Yes • Index plate control: Yes • Injection Unit 1 (Main) – Type 650H • Max. shot volume: 200 cm³ • Stroke volume: 251 cm³ • Screw diameter: 40 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1,930 bar • Injection rate: 142 g/s • Shot weight (PS): 216 g • Plasticizing rate: 26 g/s • Nozzle opening: 15 mm • Pump motor: 30 / 12.3 kW • Injection Unit 2 (Secondary) – Type 200W • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2,000 bar • Injection rate: 104 g/s • Shot weight (PS): 60 g • Plasticizing rate: 12 g/s • Nozzle opening: 15 mm • Pump motor: approx. 6.8 kW • Axis travel paths • X-axis (injection unit): 500 mm • Y-axis (rotary table/mold carrier): 1,000 mm • Z-axis (clamping unit): 1,400 mm • Equipment and options (machine integrated) • SPC / process control: Yes • Pressure interface: Yes • Second injection cylinder: Yes • Mold monitoring: No • Internal mold pressure sensor: p-θ-t-θ (Priam) • Hot runner control: 16 zones • Filter dryer: No • Special programs: Yes • Special option: GealanXcomp • Automation: No • Condition: • Well maintained and serviced Additional equipment • Engel linear take-out robot ERC 23/1-E (included)

Stav: dobrý (použitý), Rok výroby: 2000, Uzatváracia sila: 100 ton Vzdialenosť medzi tyčami: 420 x 420 mm Rozmery Duedporthkujfx Adyep platní: 570 x 570 mm Priemer šneku: 35 mm Hmotnosť vstreku: 127 g 'Nová teplotná doska ARB 777 (cena 2.750€)

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Arburg 270 M-350-90 U Duodpfxog S I S Aj Adyep Upínací síla 35 t Rok výroby 1997 Šnek 25 mm Vzdálenost mezi sloupy 27x27 cm

Stav: veľmi dobrý (použitý), Rok výroby: 2004, Engel Victory 80/45 Tech Schließkraft: 45 Tonnen, holmlos Schnecke: 22 mm Baujahr: 2004 Steuerung: CC 200 Dedsh Rawbepfx Adyjup

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Rok výroby: 2010, číslo stroja/vozidla: 1005/40200317/2010, farba: sivý, Perfektný stroj v každom detaile, pripravený na okamžité nasadenie do výroby, pozostávajúci z: zásuvného vykladača; troch podávačov hárkov, z ktorých jeden je vybavený odhadzovacími diskami, jeden je rozdeliteľný na dvojitý podávací modul na vkladanie samostatných príloh, jeden otočný o 90° pre vkladanie príloh v smere pohybu; lepiace zariadenie spojené s elektronickou etiketovačkou na vkladanie adries od 1 do 4 palcov, na 2 až 4 dráhy, vhodné aj na bankové výpisy; baliaci stroj pripravený s fóliovacím zariadením na zníženie voľnosti vrecka; zberný a počítací stohovač s bočným vyhadzovaním a mechanickým výstupným pásom na hotový produkt. Dedpfxjuxmlio Adyoup

Rok výroby: 2014, stav: pripravené na použitie (použité), Uzavieracia sila: 600 kN, hmotnosť: 9 t, počet motohodín: 3638 h, s manipulačným robotom ENGEL viper 20. Djdpfx Aoh Nypfjdyeup

Stav: dielensky repasované (použité), Rok výroby: 2002, Arburg Allrounder 420C 1000-350/150 Arburg bimaterial injection moulding machine with a clamping force of 100 tonnes. Year of manufacture: 2002. 79,115 operating hours. The machine will be delivered completely refurbished by our expert technical team and in perfect working condition. We can offer installation and commissioning at your facility, ensuring correct operation. Extras: Rotary table, Geiger robot, Wanner granulator. Technical Details CLAMPING FORCE: 1000 kN SCREW DIAMETER: Horizontal 40mm Bimetallic SCREW DIAMETER: Vertical 25mm INJECTION PRESSURE: 2500 BAR vertical / 2120 BAR horizontal INJECTION VOLUME: Horizontal 182 cm³ INJECTION VOLUME: Vertical 54 cm³ TIE BAR DISTANCE: 420 x 420 mm MINIMUM MOULD HEIGHT: 250 mm MAXIMUM DISTANCE BETWEEN PLATENS: 750 mm OPERATING HOURS: 79,115 Dsdpfx Aep Audqsdyeup YEAR OF MANUFACTURE: 2002