ES 200/60 HL ST

ENGEL

Stav: dobrý (použitý), Rok výroby: 2015, upínacia sila: 2 200 kN, Výbava: dokumentácia / manuál, Kontrolka : CC300 Spínacia sila: 220 t Vstrekovacia jednotka Priemer skrutky: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Objem výstrelu: 318 cm3 Typ: Horizontálny Pohon: 1: Hydraulický Upínacia jednotka Min. výška formy: 300 mm Max. otvor : 758 mm Njdpox H Awljfx Af Rskt Vybavenie: Euromap 67 Kontrola vyhrievania formy 8 zón 2x Pneumatický ventil 4x Hydraulické ventily 4x ťahače jadier K dispozícii je Wittmann W818-4597 Kompletné údaje o stroji na vyžiadanie.

Stav: veľmi dobrý (použitý), Rok výroby: 2007, 1 unit used injection moulding machine Manufacturer: ENGEL Model: VICTORY 200/28 TECH Year of manufacture: 2007 Clamping force: 28 tons Tie bar spacing: TIE-BARLESS Screw diameter: 25 mm Max. shot volume: 49 cm³ Shot weight: 44 g/PS Control system: CC200 Equipment: - 1 x core pull Nsdpfx Afeu Eu Tns Rskt

Stav: dobrý (použitý), Rok výroby: 1992, Uzavieracia sila: 500 kN Priemer slimáka: 30 mm Hmotnosť: 3 200 kg Nksdpfsvygh Nox Af Rjt Okamžite k dispozícii zo skladu

Stav: dobrý (použitý), Rok výroby: 1998, Priemer slimáka: 25 mm Uzavieracia sila: 25 ton Otváracia dráha: 350 mm Hmotnosť: 2 900 kg Ihneď k dispozícii zo skladu Njdpfevxh Iuex Af Rekt

Stav: dobrý (použitý), Rok výroby: 2004, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 400 mm, zdvih osi Y: 500 mm, zdvih osi Z: 450 mm, otáčky vretena (min.): 16 000 ot./min, Stroj je v dobrom technickom stave, - riadiaci systém Heidenhain TNC 426, zásobník na 20 ks HSK 63, vrátane sondy + 4. os. Nksdpfxjxfg Aye Af Rot

Stav: veľmi dobrý (použitý), Rok výroby: 2014, prevádzkové hodiny: 43 500 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 194413, upínacia sila: 2 200 kN, priemer skrutky: 55 mm, zdvihový objem: 475 cm³, vstrekovací tlak: 1 578 lišta, vstrekovacia hmotnosť: 440 g, minimálna výška formy: 300 mm, zdvih vyhadzovača: 180 mm, otvárací zdvih: 750 mm, celková hmotnosť: 12 740 kg, vykurovací výkon: 13,4 kW (18,22 k), Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer. Naturally, we also purchase well-maintained injection moulding machines from year of manufacture 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important Update – Tax Note and Advantage for Used Machines As of 01.07.2025, used machines will also qualify for a special depreciation allowance of 30% per year. In addition to the lower price compared to new equipment, you can claim the same depreciation amounts as for a new machine. Keyword: Growth Booster (§ 7 Abs. 2 EStG-E). Manufacturer: Engel Model: VC 750 / 220 Controller: CC200 Year: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection unit Screw diameter: 55 mm Injection volume: 475 cm³ Shot weight: 430 g Heating power: 13.4 kW Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1,179 bar – increased to 1,578 bar Clamping unit Clamping force: 220 t / 2,200 kN Opening stroke: 757 mm Max. daylight: 1,050 mm Min. mould height: 300 mm Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras: Core pull The machine is very well maintained and can be inspected under power. Any peripherals possibly shown are NOT included in the offer! The machine is available immediately. Delivery ex works, loaded onto buyer’s truck, or free to destination against reimbursement of freight costs. Information about the machines we offer and our company: - We only sell machines acquired directly from ongoing production, from our own inventory in Hanover. Njdpfx Afjyc Ewxe Rskt - All machines offered are inspected and tested prior to dismantling. - We do NOT sell insolvent assets – we are NOT brokers dealing with third-party property. - All machines offered originate from successful companies for whom maintenance is a matter of course. - All machines offered can be viewed in our warehouse.

Stav: veľmi dobrý (použitý), Rok výroby: 2013, upínacia sila: 4 000 kN, Výbava: dokumentácia / manuál, Kontrola: CC200 Rok: 2013 Spínacia sila: 400 t Max. denné svetlo: 1450 mm Výška formy min. max: 450-1000 mm Zdvih vyhadzovača: 250 mm Priemer skrutky: 70 mm (skrutka S8 G1) Objem výstreku: 1501 cm3 Vstrekovacia rýchlosť: Vstrekovací tlak: 2252 barov Max. otáčky skrutky: 160 ot/min Typ: Horizontálny Pohon: 1: Hydraulický Njdpoyctyzofx Af Rjkt 2 ťahače jadra 16 zón vyhrievania formy 12 prietokov vody Euromap 67 ECODRIVE VZDUCHOVÉ VENTILY

Stav: veľmi dobrý (použitý), Engel Victory 1350/220 Tech Nsdepdrpzspfx Af Rskt Zatváracia sila: 220 ton Rok výroby: 2004 Upínacia doska (šírka x výška): 860 x 830 mm Priemer šneku: 55 mm Objem vstrekovania: 618 cm³ Ovládanie: CC 200 Minimálna montážna výška formy: 250 mm Maximálna montážna výška formy: 730 mm

Stav: pripravené na použitie (použité), Rok výroby: 2004, upínacia sila: 1 100 kN, priemer skrutky: 135 mm, This ENGEL Duo 11050/1100 WP was manufactured in 2004. It is a hydraulic injection moulding machine with a clamping force of 11,000 kN. Take advantage of this opportunity to purchase an ENGEL Duo 11050/1100 WP hydraulic injection moulding machine. Contact us for more information. Clamping Unit • Clamping force: 11,000 kN • Opening force (with pressure pad): 760 kN • Opening force: 615 kN • Opening stroke: 2,350 mm • Min. mould installation height: 700 mm • Max. mould installation height: 1,280 mm • Max. distance between platens: 3,050 mm • Platen size (horizontal × vertical): 2,340 × 2,040 mm • Tie bar spacing (horizontal × vertical): 1,575 × 1,320 mm • Tie bar diameter: 230 mm • Max. mould weight: 30,000 kg • Ejector stroke: 300 mm • Ejector force: 230 kN • Dry cycle (Euromap 6) – time: 5.2 s • Dry cycle (Euromap 6) – stroke: 1,100 mm Injection Unit 1 • Screw diameter: 135 mm • Dosing stroke: 570 mm • Max. shot volume: 8,159 cm³ • Max. screw speed: 120 rpm • Screw L/D ratio (3-zone): 20 Nsdjx D Hd Ispfx Af Rjkt • Plasticising rate (3-zone): 166 g/s • Screw L/D ratio (barrier): 22 • Plasticising rate (barrier): 256 g/s • Injection rate: 1,255 cm³/s • Injection rate at increased pressure: 915 cm³/s • Specific injection pressure: 1,170 bar • Specific injection pressure (increased): 1,600 bar • Nozzle stroke: 950 mm • Nozzle contact force: 150 kN • Heating capacity (standard): 93 kW • Number of heating zones incl. nozzle: 6 • Pump drive power: 130 kW • Oil capacity: 1,600 l Weight • Net weight (clamping unit / injection unit): 62 t / 18 t

Stav: veľmi dobrý (použitý), Rok výroby: 2007, Engel Insert 80V/80V/100 2F / 2-C tie-barless machine, vertical / Perfect technical condition Year of manufacture: 2007 Injection Unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Dosage volume: 54 cm³ Clamping Unit: Clamping force: 100 t Tie-bar spacing: 0x0 mm (tie-barless) Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 Additional Equipment: Tie-barless machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Hot runner control x 12 Infrared safety curtains Thermoplastic and rubber injection units available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by authorized Engel Service in Germany Njdoyctm Uepfx Af Rokt Dimensions: Weight: 9,400 kg Length/Width/Height: 4.85 x 1.47 x 2.30 m Drive: Pump/Motor: 30 kW Price: On request

Stav: dobrý (použitý), Zmršťovací tunel nemeckého výrobcu: - Otvor tunela približne 500 x 200 mm. - Nastaviteľná teplota do 250 °C a prepravná rýchlosť do 25 m/min. - Možnosť voľby medzi pevnými alebo otočnými tunelovými tyčami. Njdoh U A I Repfx Af Rokt - Pomocou odklápacích plechov je možné samostatne nastaviť prúdy horúceho vzduchu zhora a zo stredu. - Spodný prúd vzduchu je možné zapnúť samostatne. - Vďaka uzamykateľným kolieskam je možné stroj jednoducho presúvať aj bezpečne zaaretovať.

Stav: veľmi dobrý (použitý), Rok výroby: 2004, Engel Victory 330/110 Tech / Production Line with Engel ER-HLI 41 Robot and Conveyor Belt / Machine in Very Good Technical Condition Year of Manufacture: 2004 Injection Unit: Screw Diameter: 40 mm Shot Weight: 190 g Injection Pressure: 1670 bar Nodpeyctmzjfx Af Rekt Dosage Volume: 201 cm³ Clamping Unit: Clamping Force: 110 t Tie Bar Distance: 0x0 mm Platen Size: 790x680 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: CC 100 Additional Equipment: Production line with integrated Engel ER-HLI 41 robot and conveyor belt Tie-barless machine 1x hydraulic core pull Injection unit: hardened - bimetallic Machine serviced by authorized Engel service Machine with original safety enclosure for robot and conveyor belt Dimensions: Weight: 7,400 kg Length/Width/Height: 5.10x1.50x2.10 m Drive: Pump/Motor: 18.5 kW Heating capacity: 9.2 kW Total connected load: 27.7 kW All listed machines are test-run by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine, or participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stav: veľmi dobrý (použitý), Rok výroby: 2017, Engel Victory 500/110 Tech Ecodrive with Sepro S5.15 robot / Hybrid machine / Operating hours: approx. in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 40 mm Shot weight: approx. 225 g Injection pressure: 2,029 bar Metering volume: 251 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 0x0 mm Platen size: 740x680 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 300 – touchscreen Additional equipment: Machine in very good technical condition Tie-bar-less, hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. in automatic mode Nksdpfx Aoyctmuef Rjt Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 6 Controller with hot runner zones x 8 Injection unit hardened – bimetallic Main motor of the machine – servo motor with inverter – energy saving Sepro S5.15 robot Year of manufacture: 2016 5-axis robot: 3 axes driven by servomotors (electric), A and C axis – pneumatic Touch control panel Robot with adapter and safety housing Purchase of robot at an additional cost Dimensions: Weight: 6,800 kg Length/width/height: 4.90x1.50x2.00 m All offered machines are started up by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stav: dobrý (použitý), Rok výroby: 2005, CITIZEN K12 CNC Automatic Lathe TECHNICAL DATA Max. machining diameter: 12 mm Max. machining length: 200 mm Max. extraction length: 80 mm Nedpfxevrz H Rs Af Rjkt Max. front drilling diameter: 10 mm Max. front thread diameter: M8 Spindle diameter: 16 mm Spindle speed: 15,000 rpm Max. machining diameter of sub-spindle: 12 mm Max. machining length of sub-spindle: 40 mm Max. drilling diameter for rear-side machining: 6 mm Max. thread diameter for rear-side machining: M5 Spindle speed, sub-spindle: 10,000 rpm Tool carrier, number of tools: 8 Speed of driven tools: 6,000 rpm X1 axis: 122 mm Z1 axis: 200 mm Z2 axis: 150 mm Weight: 1,950 kg SCOPE OF DELIVERY Includes (not a complete list): Citizen K12 CNC automatic lathe Chip tray Transformer Complete operating documentation Exact scope of delivery as per photo documentation. We do not guarantee the accuracy, completeness, or timeliness of the information provided.

Stav: veľmi dobrý (použitý), Rok výroby: 2018, Engel Victory 330H/200V/140 Combi Ecodrive / Production Line with Sepro Multi Inject 20 Robot / Operating hours: approx. 8,000 h in automatic mode Year of manufacture: 2018 Injection unit: - Screw diameter: 30 mm - Shot weight: approx. 100 g - Injection pressure: 2,400 bar - Dosing volume: 113 ccm Clamping unit: - Clamping force: 140 t - Tie bar spacing: 0x0 mm - Platen size: 750x750 mm - Ejector: hydraulic - Clamping unit: hydraulic Control: CC 300 - touchscreen Additional equipment: - 2K injection moulding machine with rotary table and robot - Tie-barless machine, hybrid: energy-saving, high speed, and very quiet - Excellent technical condition, the machine operated in a clean room environment - Operating hours: approx. 8,000 in automatic mode - Total operating hours: 12,005 h - Euromap 67 - Robot interface - Air valve x 6 - Hydraulic core pull x 5 - Hot runner control system x 16 - Reinforced injection units – bimetallic - Main drives – 2 x servo motors controlled with inverter - Proportional valves on injection units – precise injection - Integrated pressure quality monitoring system by Kistler – mould cavity pressure measurement - Screw diameter in vertical injection unit: ⌀25 mm – approx. 58 g/PS - Option to purchase original Foboha rotary table for an additional charge Nksdpfxsyctmbj Af Rst - Rotary table diameter: 740 mm - Both injection units can be fitted with a larger or smaller screw diameter Sepro Multi Inject 20 Robot - Year of manufacture: 2018 - 4-axis robot: all 4 axes driven by servo motors (electric): X, Y, Z, B (rotation) - Axis travel (approx.): X-4000, Y-1200, Z-1500 mm - Automatic axis lubrication - Touchscreen control panel - Robot safety package - Robot with adapter and safety enclosure - Robot available for separate purchase at an additional cost Dimensions: - Weight: 10,300 kg - Length/Width/Height: 5.56x1.76x3.46 m All advertised machines are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you can participate in live technical tests at our site in Łódź. Price: On request