Olepička hrán Hebrock F5

HEBROCK F5

Stav: nový, Rok výroby: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 guarantees edge processing in all steps, as it is equipped with all the components you need for your requirements: jointing cutter, end trim saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility on your way to a perfect finish, the F 5 can optionally be equipped with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Pgsdslht Hwspfx Afpew Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next - 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot-melt glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with changeover preparation including glue discharge device, HF (high-frequency) end trim saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination type), corner rounding unit, radius scraper, surface scraper (including pneumatic lift), buffing station, robust chain feed, ball-bearing double roller top pressure, inspection window on the rear of the machine, extendable workpiece support, feed speed approx. 10 m/min F5/08/4 Quick-change device for corner rounding unit F5/08/5 Additional changeover motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spray unit F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: Ex stock 54634 Bitburg - Available in calendar week 4 -

Stav: použitý, Rok výroby: 2018, Edgebanding machine AKV 3006 DK - F with jointing milling unit including DIA tools; jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station with radius R 2.5 mm. Technical Description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF cross-cutting station (16,000 rpm) for front and rear edge overhangs - HF milling station (16,000 rpm) with replaceable cutter heads (combination execution) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment for the crosscut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel Psdoxfh Tmjpfx Afpegw - Double roller pressure beam - Aggregate inspection windows from both the rear and operator side - PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic milling cutter adjustment, 1 pc; switching between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is manual via the stop flap inside the machine. Polishing station (buffing wheel) 1 pc. Corner rounding cutter 1 pc including combination tool and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper 1 pc including pneumatic lift-off device radius R 2.0 mm. Flat scraper 1 pc with pneumatic control. Glue station quick-change system including 2nd glue pot and bottom glue discharge, for rapid color change (1 pc.) Grooving saw unit, horizontal, into the edge (1 pc) including pneumatic lift-off and grooving tool. Separate extraction for jointing unit (1 pc), directly on the jointing unit, vertically upwards, d=80 mm for optimal extraction performance; strongly recommended from AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm (1 pc) Ball bearing for corner rounding cutter 24.2 mm (1 pc) Exchangeable motor 0.37 kW for corner rounding cutter (1 pc) with quick-change device including radius cutter R 1 Change spindles, 1 set = 2 pieces, 1 pc 1 set of quick-change motors for longitudinal processing top and bottom, incl. tool R 1 Compressed air requirement: 100 - 150 l/h Location: Nattheim

Stav: nový, Rok výroby: 2024, NA SKLADE!!! Pgsdshymgdspfx Afpjw Max. hrúbka hrany: 3 mm Min./max. hrúbka obrobku: 8 - 50 mm Min. dĺžka obrobku: cca 160 mm Doba prípravy na prevádzku: cca 3,5 min Hmotnosť: cca 900 kg Max. príkon: Ø cca 7,4 kW Priemer odsávacieho hrdla: Ø 1 x 140 mm Elektrické pripojenie: 400 V - 3 fázy - 50 Hz Výška pracovného stola: cca 900 mm Posuvná rýchlosť: cca 10 m/min Rozmery stroja: cca 4.300 x 1.300 x 1.400 mm (D x Š x V) Kombinovaná frézovacia hlava Polomer rohového frézovania R=2 mm Polomer zaoblenia rohov R=2 mm Polomer ťahovej čepele R=2 mm

Stav: nový, Rok výroby: 2025, Edge banding machine F5 with PLC control (incl. 15" touchscreen), Hot-melt glue application on the workpiece for edge material up to 3 mm: Joint milling unit (incl. DIA tool) up to 2 mm milling depth, maintenance-free glue pot with preparation for interchangeable pot incl. glue discharge device, HF milling station with pneumatic milling adjustment, incl. corner rounding unit, radius scraper, flat scraper (incl. pneumatic lifting unit), finishing station Jointing head Whispercut Combination milling head Radius milling cutter R=2mm Radius corner milling cutter R=2mm Quick-change system for corner milling cutter Pgsdpfjh Hl Ayjx Afpsw Radius changeover motor R=1mm Multi-radius scraper R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm workpiece thickness 8-50mm min. workpiece length approx. 160mm feed speed 10m/min Ready for operation in approx. 3.5 min dimensions approx. 4300x1300x1400mm (LxWxH) weight approx. 900kg extraction socket 1 x 140mm

Stav: použitý, číslo stroja/vozidla: 007793, Typ pripevnenej hrany: tenká hrana, hrubá hrana, dyha Lepiaci systém: EVA Zarovnávanie frézovaním: áno Multifunkčné agregát: áno Max. posuvová rýchlosť: 11 m/min Maximálna hrúbka dosky: 60 mm Psdev Tfydepfx Afpjgw

Stav: nový, Rok výroby: 2025, The Hebrock F 5 If you require maximum performance, the Hebrock F 5 is the solution for demanding edge banding in woodworking shops. The F 5 ensures complete edge processing at every stage, as it comes equipped with all components needed to meet your requirements: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, flat scraper, and buffing station. For even greater flexibility en route to a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Pjdpfxei Anado Afpjgw Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min F5 Next edge banding machine With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge material up to 3 mm; jointing cutter (including Dia tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drain, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and exchangeable cutter block (combination type), corner rounding unit, radius scraper, flat scraper (incl. pneumatic lift), buffing station, robust chain feed, ball-bearing double roller top pressure, rear view window, pull-out workpiece support, feed speed approx. 10 m/min. F5/08/4 quick-change system for corner rounding unit F5/08/5 additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 multi-radius scraper (R1/R2) F5/24/1 spraying unit for separating agent F5/24/2 spraying unit for cleaning agent F5/25. spraying unit for edge F5/27. nesting for milling and radius scraper F5/30. pneumatic 3-point adjustment (radius, bevel, flush milling) Location: Ex stock 54634 Bitburg Available in calendar week: 4/2024

Stav: ako nová (výstavný stroj), Rok výroby: 2018, Spindle tiltable: Yes, -45 to +45° Height adjustment: Handwheel Pgsdpfsgyzzmsx Afpew Tilting adjustment: Handwheel Fence adjustment: Manual Height display: Mechanical counter display Tilting angle display: Mechanical counter display Spindle fence display: Mechanical counter Spindle diameter: 30 mm Spindle speeds: 3000, 4500, 6000, 8000, 10000 rpm Power input: 7 kW Motor brake: Yes, automatic Extraction connection: 1 x 120 mm, 2 x 80 mm Machine length: 2500 mm Machine width: 1250 mm Weight: 510 kg

Stav: takmer ako nový (použitý), Rok výroby: 2020, Funkcionalita: plne funkčný, typ nastavenia výšky: mechanický, vstupné napätie: 400 V, potrebná výška: 1 200 mm, Olepovačka hrán vybavená: - kalibrátory - zásobník hran - vyměnitelná tavná vana na lepidla EVA nebo PUR Pgjdpfx Afjwy Ugxepjw - ořezávání (přesahů) - ořezová jednotka pro zaoblování hran

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, priemer pílového kotúča: 600 mm, OPTIMIZING CROSS-CUT SAW LINE WITH ROTATABLE SAW UNIT CT600 / 6000 – max. raw material length: 6,000 mm Podpjv Aub Nofx Afpjgw Cutting dimensions, aggregate position A: At 0°: 200x215 mm, 50x370 mm At 30°: 200x185 mm, 50x325 mm At 45°: 200x150 mm, 50x265 mm At 80°: 200x35 mm, 50x63 mm Cutting dimensions, aggregate position B: At 0°: 160x315 mm, 40x400 mm At 30°: 160x270 mm, 40x350 mm At 45°: 160x220 mm, 40x285 mm At 80°: 160x52 mm, 40x70 mm Min. workpiece thickness: 10 mm (20 mm with automatic feed) Support table inclined at 8° Pusher stop on the right side Saw unit technical data: - Unit with table fully rotatable - Motor: 7.5 kW, 400 Volt, 50 Hz - Carbide-tipped saw blade: diameter 600 mm, F=30, Z=60, S=5 - Average cut cycle: approx. 4 sec. - Automatic rotation of the unit: -70° to +70° - Saw unit rotation: -80° to +80° available on request - Aggregate rotation from 0° to 70° in approx. 1.3 sec. - Positioning accuracy: +/- 0.2 mm Hold-down system consisting of 2 pneumatic pressure cylinders with mounted pressure rail Side pressure plate system with electronic control Pusher system technical data: - Feed via gear-rack system with brushless motor - Positioning accuracy: +/- 0.4 mm - Feed motor capacity suitable for pushing a bundle weight of up to 80 kg - Max. feed speed: 90 m/min - Pneumatic pusher lift after completion of cutting cycle and return at pass-over level Control: - 12” touch-screen BECKHOFF professional PC with WINDOWS operating system - USB port - Ethernet port - Loading and saving of machine data via USB - Cutting program editable directly at the input unit - Transfer of cutting lists via USB or Ethernet - Direct import of .btl (10.4) format files Operating software: - Up to 1,000 cutting lists with up to 11 different cut dimensions each, or - 1 list with up to 10,000 different cut dimensions in sequence - Cutting cycle with 4 optimization options (max. length, min. waste, sequence, length priority) - Graphical display of the workpiece Installed additional options: ZA110 Outfeed table (per meter) ZA040 Saw unit table rotation 80°

Stav: nový, Rok výroby: 2025, Výrobky Robland vyrába spoločnosť Landuyt N.V., so sídlom v Brugge, Belgicko. BM-3000: • Vyfrézovacie kotúčové ústrojenstvo (maximálna hĺbka drážky 10 mm) • Ľavý vrták 5 mm na vytváranie radových otvorov • Vrták 20 mm na montáž systémov Minifix • Frézovacie nástroj 8 mm na obmedzené vŕtacie a frézovacie operácie Pgsded Hz Nispfx Afpew • Vrták 35 mm na montáž pántov • Hrúbka dosiek, ktoré je možné obrábať: 12–40 mm • Stroj je vybavený štvorpolohovým vrtacím skľučovadlom a pílovým kotúčom • Pracovný rozsah osi Y: vŕtanie: 900 mm; pílenie: 850 mm Technické údaje: • Rozsah osi Y: - Vŕtanie: 920 mm - Rezanie: 860 mm • Podpora osi X: 3000 mm • Osi Z: hrúbka dosiek 12 mm až 40 mm • Osi A: 360° • Posuvová rýchlosť: 20 m/min • Minimálne rozmery materiálu (X): 300 mm, (Y): 120 mm, (Z): 12 mm • Stroj je vybavený štvorpolohovým vrtacím skľučovadlom a pílovým kotúčom • Maximálny a minimálny Ø otvorov, ktoré je možné vŕtať: 3 mm – 35 mm • Pílka sa pohybuje po osi X • Maximálna hĺbka drážky pomocou pílového kotúča: 10 mm • Motor: 0,75 HP, 3x 400V / 3x 230V • Minimálna požadovaná odsávacia kapacita: 2300 m³/h