Jednotka chladenej vody, chladiaci systém ENR 008

Hitema ENR 008

Stav: dobrý (použitý), Položka: A-7577 Nádoba na smetanu 10 000 l Hnedpfx Afsh E Dp Ajfsk Nerezová procesní nádoba na smetanu, dvojitý plášť, izolovaná, míchadlo s lopatkami (škrabkovým typem) z vrchu, CIP armatura namontovaná na vrchu, 3 nastavitelné nohy, manlidlo nahoře. Kapacita: 10 000 l. Nabízíme 2 kusy ze skladu. Průměr: 2 458 mm.

Rok výroby: 2019, stav: pripravené na použitie (použité), A Spinner simultaneous turning center with three turrets, including extensive accessories, spare parts, and tooling, is available. Axes travel X1/X2/X3: 180 mm, travel Y1/Y2: +/-45 mm, travel Z1/Z3: 704 mm, travel Z2/E2: 620 mm/720 mm, rapid traverse X/Y/Z: 30 m/min, acceleration: 0.5 g. Spindle 1: speed: 5,000 rpm, nose: A6, bore: 65 mm, chuck diameter: 210 mm, power: 18 kW, torque: 115 Nm. Spindle 2: speed: 700 rpm, nose diameter: 110 mm, bore: 42 mm, max. chuck diameter: 140 mm, max. jaw weight: 1.25 kg, power: 16.6 kW, torque: 100 Nm. Turrets 1/2/3: turret stations: 3x12, rpm: 8,000, tool interface: BMT 45, power: 4.3 kW, torque: 13.6 Nm. Machine dimensions X/Y/Z: approx. 2880 mm / 2130 mm / 1990 mm, weight: approx. 7,500 kg, operating hours: 27,102 h, control: Fanuc 31i. Includes Top Automazioni bar feeder, coolant/high-pressure system with 80 bar, chip conveyor, fire extinguishing system, a comprehensive tooling package, and additional spare parts. Documentation available. On-site inspection possible. Hnjdeua E Trepfx Affok

Rok výroby: 2000, stav: pripravené na použitie (použité), Travel X/Y/Z: 600mm/410mm/520mm, Table dimensions X/Y: 840mm/420mm, Spindle speed: 6,000 rpm, Spindle power: 8.5 kW, Tool holder: SK40, Tool stations: 22, Rapid traverse X/Y/Z: 36m/36m/20m/min. Machine dimensions X/Y/Z: approx. 2200mm/2300mm/2300mm, Weight: approx. 2,500kg, Control: Heidenhain TNC 426. An on-site inspection is possible. Hjdpfx Afov Uqb Nofsnk

Stav: použitý, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Hedpfx Afouxft Eofonk Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: dobrý (použitý), valcová brúska Hjdpfetrgndsx Affonk

Stav: nový, *TECHNICAL SPECIFICATION: Hnodpsg Ezarefx Affsk Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 (standard) Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Integrated 2-circuit pump system (INFO: Ensures rated performance even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metals free: optional) - All media-carrying components and pipelines insulated for low temperature applications - Water-cooled condenser (air-cooled available on request) *OPTIONS: - Flow control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test sample draining via compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This equipment complies with European directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard equipment; customer requests deviating from the standard will be indicated in the quotation and/or order confirmation.

Stav: použitý, Rok výroby: 2017, Technické údaje: Priemer brúsenia: 280/320 mm Hodpfx Aettxg Soffjnk Dĺžka brúsenia: 750 mm Výška hrotov: 170 mm Hmotnosť stroja cca: 22,5 t Potrebný priestor cca: 4,7 x 3,65 x 3,0 m

Rok výroby: 2009, stav: dobrý (použitý), MAJA RVE 800 S strojná vločka na výrobu ľadu Stroj na výrobu ľadových vločiek je všestranne využiteľný: Pri kutrovaní pri výrobe tepelne opracovaných údenín Výroba pekárenských výrobkov a polotovarov Chladenie rýb a morských plodov Doplňovanie chladiacich pultov v supermarketoch, v oddeleniach delikates Dekoratívne chladenie na bufetoch Rok výroby: 2009 Výkon výroby ľadu: 800 kg/24 h Príkon: 400 V, 740 W Chladivo: R404A Na pripojenie k externému chladiacemu agregátu (nie je súčasťou dodávky) Rozmery cca: 150 x 147 x V 240 cm Možnosť financovania cez našu banku. complet-konzept.leasingo.de Hsdpfskx Hv Ijx Affsnk Ďalšie váhy - nové aj použité - nájdete v našom obchode! Medzinárodné prepravné náklady na vyžiadanie!

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Ponúkame tu používané rôzne 3R systémy. Systémy sú vo veľmi dobrom stave a plne funkčné. Prehliadka je možná po dohode termínu. Pozícia 1 System 3R-203 Otočný element WEDM 360° Pozícia 2 System 3R-201J Adaptér WEDM 90° Pozícia 3 System 3R-201J Adaptér WEDM 90° Pozícia 4 System 3R-201J Adaptér WEDM 90° Pozícia 5 System 3R-202 MiniBlock Pozícia 6 System 3R-202 MiniBlock Pozícia 7+8 System 3R-204 Výškovonastaviteľný adaptér WEDM Pozícia 9 System 3R-218/30S Sady držiakov Pozícia 11 System 3R-602.21 Ručné skľučovadlo Macro Pozícia 12 System 3R-294.3 Zverák Pozícia 15 System 3R-293.3 SuperVice Pozícia 17 System 3R-200-4J-2 470 mm System 3R-200-4J-2 470 mm System 3R-200-4J-2 330 mm System 3R-200-4J-2 138 mm Pozícia 18 System 3R-239–545 0006-V01 Hnjdpfx Afsxqn Ubsfjk System 3R-239–495 Doprava a prehliadka sú možné!

Rok výroby: 2018, stav: použitý, Výrobník ľadu Výrobca: Ice Systems (UK) Model: F2AS Rok výroby: 2018 Hnedpfxowp R Rlo Affok Typ ľadu: šupinkový ľad Kapacita: 2 tony za 24 hodín So stojanom, v skrini Ovládanie cez dotykový displej