Lis na balíky

HSM GmbH + Co. KG VK 8818 R-FU

Good day,

We hereby offer you, without obligation, a used, complete baling press line, consisting of the baler from manufacturer HSM, type VK 8818 R-FU, including conveying technology and wire tying stations.

The following technical data have been taken from the manufacturer's operating manual and brochures, for which we cannot guarantee the correctness or completeness.

Technical data baler:
Manufacturer: HSM GmbH + Co. KG, Germany
Type: VK 8818 R-FU
Year of manufacture: 2015
Operating hours: 20,331 hours (as of September 2025)
Number of bales pressed: 29,020 bales (as of September 2025)
Pressing force main press: 1,000 kN
Specific pressing force: 120 N/cm²
Shear edge pusher force: 121 kN
Feed chute dimensions: 970 x 1,800 mm
Theoretical cycle time at idle: 8.3 seconds
Theoretical throughput capacity: 643 m³/hour
Bale dimensions: 1,100 x 750 mm, variable length 600 up to 2,000 mm
Drive power: 2 x 45 kW, frequency controlled
Connected load: 110 kW
Total current consumption: 213 A
Main fuse: 250 A slow blow
Tying system: 5-fold horizontal, fully automatic
Throughput at bulk density:
20 kg/cbm: 12.86 t/hour
50 kg/cbm: 32.15 t/hour
Bale weight at a bale length of approx. 1.2 m: 650 up to 750 kg/bale, depending on material
Hydraulic oil tank volume: 2,000 L HVI 46
PLC: Siemens S7-300
Control panel: Siemens TP 700
Press dimensions (set up): 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation dimensions press with conveying technology: 35,000 x 8,480 x 7,745 mm (L x W x H)
Weight of press: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t)

Additionally ordered special equipment:
Frequency-controlled main drive, 2 x 45 kW, providing up to 40% energy savings versus standard motorization 2 x 45 kW, with equal performance yield
Manual activation or deactivation of the number of wire ties, to save tying wire for non-expansive material
Shear edge pusher with 121 kN pressing force
Sensor-based wire monitoring, with automatic press shutdown in case of wire break or wire end
Bale chute
Visual warning signal, mounted on the control cabinet

Condition of the baler:
The entire press system (baler and conveying equipment) is in good, immediately operational condition, and has been cleaned weekly, lubricated, and serviced as per manufacturer guidelines by the operator.

Technical data for chain belt conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Type: Chain belt conveyor KF 1800
Year of manufacture: 2015
Belt speed: 0.36 m/sec
Feed belt length: 7,000 mm
Uphill belt length: 14,500 mm
Gooseneck length: 1,550 mm
Incline: 30°
Dodpfjyz Af Eex Ad Njkk
Nominal width: 1,800 mm
Usable width: 1,638 mm
Overall conveyor height: 7,745 mm
Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of delivery:
HSM baler VK 8818 R-FU
Maintenance platform
Bale chute
Wire deflection stations
Wire spool trolleys (without wire spools)
Chain belt conveyor Stadler KF 1800
Transverse sliding belt conveyor
Pit cover from infeed conveyor to pit
Second control cabinet for operating the press at the conveyor
Machine documentation in English

Delivery time:
The entire system has already been dismantled, stored and is ready for loading at short notice upon receipt of payment.

We would be pleased if this or any of our other balers is of interest to you.

Your Service Team
Mertens & Frowein GmbH

Inzerát bol automaticky preložený. Chyby v preklade sú možné.