Olepovačka hrán

Lange B90 KFE

Stav: nový, Rok výroby: 2023, New machine Year of manufacture: 2023 Single-sided automatic edge banding machine with jointing unit, hot-melt adhesive application for straight workpieces (EVA-PUR glue pot with drain function optional), HF cross-cut saw station, HF milling unit, corner rounding unit, chain feed, double-roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated line control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0 / 6.0 mm and workpiece heights from 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner rounding • 3 free positions for finishing units • 10" color touchscreen Machine length: 4,030 mm Workpiece thickness: 8 - 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (approx. 200 mm with corner rounding) Edge thickness: 0.4 - 3.0 mm Jointing unit removal: 0 - 2.0 mm, stepless Total connected load: 7.5 kW - 400 V Feed speed: 10 m/min; 8 m/min. Pneumatic connection: 6 bar Net weight: 1,050 kg Options: Surcharge for radius scraper unit with air blast device + extraction Gksdpjw I U Drefx Al Tsa Surcharge for surface scraper unit + extraction Surcharge for buffing unit EVA/PUR glue pot with drain function Surcharge for diamond tools, height=65mm, for jointing unit Riepe spraying device (anti-adhesive) at the jointing unit Riepe spraying device (cleaning spray before buffing unit) Pipe system with 90° bend + manual slide valve, mounted on machine with D=200mm Availability: short notice Location: Hochheim

Stav: veľmi dobrý (použitý), Rok výroby: 2017, Brandt KDF 1440 Edition Only 1,700 operating hours – very good condition – can also be supplied with XES 200 Autark preheating station (+ € 4,500) OVERVIEW OF UNIT CONFIGURATION: JOINT MILLING UNIT 2 x 2.2 kW 200 Hz GLUING UNIT QA 65 N END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.18 kW PNEUMATIC ADJUSTMENT FOR END TRIMMING BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT MS 40, COUNTER-ROTATING PNEUMATIC 2-POINT ADJUSTMENT PROFILE MILLING UNIT 1 x 0.35 kW WD 60; also suitable for construction floors PNEUMATIC 2-POINT ADJUSTMENT FOR RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Upper pressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spraying unit for workpiece Gedpfxjzb Iggj Al Toka Automatic edge feeding Multiple roller tracing for multi-stage milling unit MS 40 & multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Min. workpiece width: – For workpiece thickness 8-22mm: 70 mm* – For workpiece thickness 23-40mm: 120 mm* – For workpiece thickness 41-60mm: 150 mm* *Depending on workpiece length – Workpiece overhang: 38 mm – Workpiece thickness: 8 – 60 mm – Max. edge height = workpiece height + 6 mm – Edge material (coil): 0.4 – 3 mm – Max. edge section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material (strips): 0.4 – 8 mm – Max. edge section: – For strips: 360 mm² – Feed speed: 8 – 14 m/min – Max. feed speed with profile milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar – Total length: 5,573 mm Complete description: see PDF

Stav: ako nová (výstavný stroj), Rok výroby: 2025, One-sided automatic edge banding machine with jointing unit, hot-melt glue application to straight workpieces (EVA-PUR glue pot with draining function optional), double-motor HF cross-cut saw station with swiveling motors, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated section control for contactless operation of processing functions. Suitable for ABS, PVC, melamine and solid wood veneer edge tape, as well as fixed lengths from 0.4 to 3.0/6.0 mm and workpiece heights from 8 to 60 mm. Feed speed: 12.0 m/min; 8.0 m/min with corner rounding • 3 free spaces for finishing units • 10" color touchscreen • Two counter-rotating, demand-actuated jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of workpieces before edging • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue feed from below (excess glue is automatically returned to the pot), precise glue application via glue roller, separate glue roller temperature setting, electronic temperature control with automatic standby function (prevents glue burning if the machine is not used for an extended period but remains powered on). Optional: EVA/PUR glue pot with drain/cleaning function for fast color changes Optional: Quick-change system for glue pot • Automatic strip magazine with spiked roller for wood strips. Gjdpfel Rix Njx Al Teka • Pressure zone consisting of a driven pressure roller synchronized with the glue applicator and two smaller, counter-conically operated, spring-loaded pressure rollers • High-frequency cross-cutting saw equipped with two HF motors (0.55 kW, 12,000 rpm), two saw blades and high-precision linear guides for clean, precise cuts, fitted with extraction hood, manually swiveling • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with a high-frequency 0.27 kW motor, can be activated from the control panel. Optional single-sided (front or rear edge) or double-sided corner rounding. • Swiveling control panel with 10" color touchscreen for glue temperature adjustment, automatic temperature reduction during machine non-use, switching processing units on and off, error diagnostics, and digital edge material counter. • LED interior lighting • Riepe spray systems for anti-stick, NFLY and cleaning agents available as options Optional finish units (3 free slots): • Radius scraping unit: Light, pulling cut removes possible milling marks from the radiused edge for a perfect finish. Fine adjustment via digital counter. • Flat scraping unit: Light, pulling cut cleans glue residues from joint area on the workpiece surface • Buffing unit: Two 0.09 kW motors, 1,500 rpm for a superior finish to ABS and PVC edge materials

Stav: ako nová (výstavný stroj), Rok výroby: 2025, Single-sided automatic edge banding machine with jointing unit, hot-melt glue application for straight workpieces (EVA-PUR glue pot with drain function optional), HF cross-cut saw station, HF milling unit, corner copying unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece sequence, and integrated distance control for contactless operation of machining functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4–3.0/6.0 mm and workpiece heights from 8–60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. • 3 free slots for finishing units • 10" color touch screen • Automatic edge feeding for roll material via rotating roll plate D=800 mm • Two counter-rotating, demand-controlled jointing units with diamond-tipped spiral jointing cutters ensure clean and tear-free jointing of workpieces before edge banding • Long infeed fence (650 mm) with support • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot), precisely metered glue application via glue roller, separately adjustable glue roller temperature, electronic temperature control with automatic stand-by function (prevents glue burn-out if the machine remains switched on but unused for longer periods). Gjdpfx Aled R U Age Teka Optional: EVA/PUR glue pot with drain/cleaning function for rapid color change • Automatic strip magazine (70 mm storage capacity) with spiked roller for wood laths. • Pressure zone consisting of one driven pressure roller synchronized with the glue roller and two smaller, oppositely conical spring-loaded pressure rollers ensure optimal bonding of edge material to the workpiece; pressure zone adjustment with digital counter. • High-frequency cross-cut saw equipped with HF motor 0.35 kW, 12,000 rpm, two saw blades, and high-precision linear guides ensure clean and precise cuts; equipped with extraction hood • High-frequency combination milling station, two powerful 0.55 kW HF motors with carbide-tipped WPL special cutters, suitable for radius, flush, and chamfer milling; horizontal and vertical workpiece tracing; unit adjustment fitted with digital counters for different edge types; two chip extraction hoods with central extraction port 2 x Ø 100 mm; vertical adjustment of the upper unit with the top pressure system. • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness. Equipped with one 0.27 kW high-frequency motor, switchable from control panel. Optional single-sided (front or rear edge) or double-sided corner copying. • Rotatable control panel with 10" color touchscreen controls glue temperature settings, automatic temperature reduction when not in use, switching on/off of units and fault diagnostics, including digital meter counter for edge material usage. • LED cabin lighting • Riepe spraying systems for anti-stick, NFLY, and cleaning agents optionally available Optional finishing units (3 free slots): • Radius scraper unit: Removes any milling marks from radius cutters with a gentle scraping cut for a perfect finish.

Stav: dobrý (použitý), Kód: 0414 Značka: SCM MINIMAX Model: ME 25 - CE štandard Automatická olepovačka hrán pre stolárstva, výrobu nábytku, zákazkový nábytok, panely, dvere, kuchyne a ďalšie – CE štandard – rok výroby 2017 Technické údaje: Hrúbka pásky v rolke: 0,4–3 mm Maximálna hrúbka hrany: 5 mm Minimálna/maximálna výška panelu: 12/50 mm Rýchlosť posuvu panelu: 7 m/min Výška pracovnej plochy: 904 mm Minimálna dĺžka/šírka panelu: 190/65 mm Vysokopriľnavý ozubený pásový posuv Podporný valčekový dopravník po celej dĺžke stroja Zloženie: Lepiaca jednotka: objem zásobníka na lepidlo 1 kg, výkon motora 0,18 kW Jednotka na odrezávanie okrajov: výkon motora 0,37 kW, priemer odrezávacieho kotúča 90 mm Z 20, otáčky kotúča 12000 ot/min Gksdpfx Alszfapmo Tja Jednotka na zaoblené zrovnávanie: výkon horného a dolného motora 0,75 kW, priemer tvrdokovových fréz 75 mm Z 4, otáčky frézy 12000 ot/min Jednotka na zarovnanie hrán pre dokončovanie PVC/ABS Jednotka na odstránenie prebytočného lepidla Priemer odsávacieho hrdla: 120 mm Celkové rozmery (mm): 1950 x 700 x 1250 (výška) Hmotnosť: 430 kg

Stav: nový, JLT upínacie regálové systémy na lepenie masívneho dreva na hrane a na plocho Gedeb Evnkspfx Al Tjka Robustný a univerzálny upínací systém špeciálne navrhnutý na lepenie masívneho dreva na hrane a na plocho, vhodný tak pre tvrdé, ako aj mäkké dreviny. K dispozícii sú dve štandardné veľkosti, pričom upínací regál (alebo panelový upínač) je ideálny na výrobu dielcov ako panely, stolárske profily, prvky schodísk, pracovné dosky, blokové lepenie a stolové dosky a podobne. Je možné upínať aj rámy. Patentované vyrovnávacie upínacie ramená obsahujú viacero dôležitých funkcií, ktoré pri iných typoch mechanických upínačov nenájdete, a ktoré zabezpečujú kvalitný lepený spoj. Rameno je možné jednoducho posúvať po ráme zo strany na stranu, prípadne medzi radmi. Pri nepoužívaní je možné ramená zavesiť vertikálne na hornú nosnú tyč, čím sa ušetrí cenný priestor v dielni. Na lepenie materiálu na plocho do hrúbky 150 mm sú k dispozícii voliteľné výkyvné dosky, ktoré sa ľahko nasadia na hornú a spodnú čeľusť upínača a rovnomerne rozložia upínaciu silu. Pri použití upínača typu 401 a výkyvných dosiek je možné lepiť materiál až do hrúbky 200 mm. Štandardné maximálne otvorenie ramena je 1020 mm, na požiadanie sú dostupné aj väčšie rozmery.

Stav: použitý, Rok výroby: 2001, Hrúbka obrobku min./max.: 6/45 mm; hrúbka hrany: 0,4 - 3 mm; max. výška hrany: 51 mm; minimálna dĺžka hrany (pásu): 350 mm; max. presah hrany na výšku na stranu: 3 mm; min. šírka obrobku: 60 mm; min. dĺžka obrobku: 180 mm; celková dĺžka: 3700 mm; šírka: 1440 mm; max. výška: 1970 mm; výška vstupu obrobku: 850 mm; hmotnosť: cca 850 kg Miesto uskladnenia: Nattheim Gkedoy Dd Iyepfx Al Tja

Stav: veľmi dobrý (použitý), Rok výroby: 2005, Značka: HOLZ HER Model: SPRINT 1310 - CE štandard Automatická olepovačka hrán s lepiacim systémom na báze kartuší na opracovanie drevených, PVC, ABS a dyhových hrán. Vhodná pre výrobu nábytku, drevotrieskových dosiek, individuálne zákazky, kuchyne, kúpeľňový nábytok, stolárstva a mnoho ďalšieho – CE norma. Technické údaje: Min./max. výška panelu: 6 – 45 mm Hrúbka hrany: 0,4 – 6 mm Maximálna výška lepenia: 51 mm Minimálna šírka panelu: 60 mm Minimálna dĺžka panelu: 180 mm Posuvná rýchlosť: 8 m/min Tlak vzduchu: 6–7 bar Koncepcia stroja: Automatický podávač pre rolkový a páskový materiál Lepiaci systém s kartušami s možnosťou prepínania medzi EVA a PUR lepidlom počas prevádzky alebo zmeny farby lepidla 3 kusy prítlačných valcov, 1 x poháňaný Orezávacia jednotka s 2 motormi po 0,22 kW Multifunkčná jednotka s riadenou osou pre zrovnávacie a skosovacie frézovanie s 2 motormi po 0,6 kW Jednotka na plošné strhávanie hrán Jednotka na strhávanie hrán v rádiuse Leštiaci agregát Kapota na ochranu proti hluku Ovládanie: Gkodpey Emw Hjfx Al Tja Otočný a výkyvný ovládací panel všetky agregáty možno spínať samostatne zobrazenie funkcií v texte a grafike predvoľba agregátov zoznam programov s menami a číslami, samodiagnostika Rozmery stroja cca: 3900 x 1050 x 1800 mm (V) Hmotnosť: 1000 kg VRÁTANE OTT Rondomat – zariadenie na zaobľovanie rohov Poznámka k použitým strojom: • Zmena technických údajov a predaj vyhradený. • Uvedené ceny sú ceny pri odbere zo skladu – naloženie v cene! • Stroje boli očistené a odskúšané. • Všetky stroje sa predávajú v stave, v akom boli prehliadnuté, bez akejkoľvek záruky. Kupujúci má možnosť stroje osobne na mieste skontrolovať. • Špeciálne dohody len v písomnej forme. (Na požiadavky odpovedáme len po uvedení vašej adresy a telefónneho čísla!)

Stav: nový, Rok výroby: 2025, New machine Year of manufacture: 2025 Gksdoy Eizzepfx Al Tsa Compact and versatile in the smallest of spaces. With a length of only 2.13 m, this unit provides the perfect finish to your workpieces. Equipped with a 1.1 kW high-frequency motor, jointing unit with diamond-tipped spiral jointing cutter, Teflon-coated glue unit, pre-cutting unit, and HF multi-function milling unit. Includes 2 free stations for finishing units, such as a surface scraper and polishing unit. Simple operation via 3.5'' color touchscreen. Technical Data Machine length: 2,122 mm Workpiece thickness: 10–45 mm Workpiece width (min): approx. 120 mm Edge thickness: 0.4 – 2.0 mm Edge height (max): = workpiece height + 4 mm (2+2) Electrical connection: 400 V Total power input: 3.6 kW Feed speed: 6.5 m/min Pneumatic connection: 6 bar Net weight: approx. 490 kg Options: Surface scraper unit Diamond tools, height = 45 mm Location: Flörsheim Availability: short-term

Stav: nový, Edge thickness: from 0.4 to 3 mm Workpiece thickness: from 9 to 60 mm Feed speed, stepless: 8 – 12 m/min Total power requirement: 15 kW Dimensions (Length/Width/Height): 4,290 x 840 x 1,690 mm Masterwood Edgebander ME 309 "Partnership Edition" ----- The Masterwood Edgebander Type ME-309 is a pneumatically controlled machine equipped with all units necessary to achieve a perfect finish. It is also suitable for processing PUR adhesives. Units: - Jointing cutter unit - End trimming saw unit - Universal milling unit - Corner rounding unit - Flat scraper blade - Radius scraper blade - Buffing unit Features: - Separator spray unit - Pre-heating lamp - Glue pot with pre-melting unit - End trimming unit - Cleaning spray unit Technical Data: Gkjdpfoy Ay Akox Al Tsa Machine dimensions: 4,290 x 840 x 1,690 mm (LxWxH) Feed speed: stepless from 8 to 12 m/min Min. panel size: 90 x 120 mm (with panel thickness 9–30 mm) Min. panel size: 90 x 200 mm (with panel thickness 30–60 mm) Min./Max. panel thickness: 9 – 60 mm Min./Max. edge thickness: 0.4 – 3 mm Connected load: 15 kW ----- Price for the above-mentioned machine on request! Plus packaging and shipping ----- Freight costs for ME-309 – EUR 2,950.00 Complete, including delivery and installation Includes intensive operator training. Unloading and internal transport to installation site: by customer. ----- (Technical specifications as provided by manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.