Obojstranná brúska

Loewer DSM 2000

Stav: nový, Number of sanding units: 2 pcs Sanding width: 190 mm Max. sanding height: 2–180 mm LÖWER Double-Sided Sander DSM 2000 ----- Double-sided through-feed sander for sanding solid wood such as window scantlings, etc. Robust top-quality design with long cast iron tables, brush and finishing unit, and feed conveyor. Suitable for heavy-duty, continuous operation, even with large material removal rates. - Offset arrangement of sanding and finishing units above and below - Direct-drive, rubber-coated sanding rollers for slip-free power transmission - Combination sanding via roller and pad for high stock removal with simultaneously flat contact area - Maintenance-free and wear-free CERMET-coated sanding pads with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for a cooler grinding process and longer abrasive belt service life - Forced pneumatically controlled sanding belt oscillation - Effective extraction of sanding dust directly at the sanding rollers, airborne dust extraction at tensioning rollers - Integrated brush and finishing unit with large dust extraction capacity - Motorised sanding thickness adjustment via precision trapezoidal lead screws and oversized linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Adjustable removal setting on lower unit via precision spindle, with measurement display via scale ring (resolution 0.1 mm) - Sanding belt tensioning by pneumatic cylinder at constant pressure - Quick sanding belt change with pneumatic release within seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic air pressure monitoring - Infeed safety via contact roller for oversized workpieces - Workpiece feed via calibrated non-slip transport belts over heavy-duty, 1000 mm long cast iron tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for jerk-free and uniform workpiece transport - Feed gear motor with three different speeds for rapid adjustment to various wood types - All motors electrically protected - Ergonomically arranged controls on workpiece infeed side - Automatic workpiece thickness scanning (no pre-measurement necessary) - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical Data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Two brake motors for main drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 6, 11, and 16 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm, each 0.37 kW Fodpevu Hdtefx Abwspn - Extraction ports: 2 x 120 mm and 2 x 150 mm - Pneumatic connection: 6 bar - Working height: 850 mm - Length: 2105 mm - Length with control panel: 2490 mm - Width: 880 mm - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 V, 50 Hz, 3 phase - CE version ----- Base price of the machine on request! ----- Optional accessories at extra charge: Infinitely variable feed: 4–20 m/min for speed adjustment to fit ...

Stav: pripravené na použitie (použité), Number of sanding units: 2 pcs. Sanding width: 190 mm Sanding height max.: 4–180 mm HESS - GLORIA 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s description: ----- Compact design engineered according to modern standards. Quiet and vibration-free operation due to a rigid, stable machine frame and special insulation. Safety features in line with EC Machinery Directive, certified as "dust tested". Offset sanding units with large pressure rollers for effective heat dissipation and stable belt tracking. Sanding units feature forced belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Fine dust extraction at the large pressure rollers. Integrated sanding belt blower system for extended belt service life. Integrated brushing and finishing device, adjustable via threaded spindle, with large dust extraction system. Motorized thickness adjustment of the entire upper unit via precision-threaded spindles and linear ball bearings on hardened and ground precision shafts with dust and dirt protection. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding pad are optimally balanced to belt load. Hardened and ground sanding drums. Maintenance-free and wear-resistant oxide ceramic sanding shoes (DBGM) providing excellent sliding properties, good heat dissipation, and high dimensional stability. Belt tensioning via pneumatic cylinder. Belt change facilitated by pneumatically controlled belt relaxation. Adjustable belt tracking during belt replacement. Electropneumatic pressure monitoring for compressed air supply with optical fault display. Automatic machine stop in case of belt breakage and with infeed guard integrated with wood thickness detection. Visual indicators at the control panel. Infeed device and proven, calibrated, slip- and grip-resistant transport belts on precision-ground tables and spring-loaded pressure rollers. Cardan shaft drive for consistent wood feed. Infinitely adjustable feed speed. Chip removal adjustment at the bottom via precision threaded spindle with scale ring (resolution 0.1 mm). Ergonomic layout of operating and adjustment elements at the front: sanding and brushing unit top, sanding and brushing unit bottom, workpiece transport, sanding thickness adjustment, operation, and warning indicator. Control and operating panel integrated in the machine frame with lockable main switch. All motors are electrically protected against overload. Technical data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: infinitely adjustable 5–25 m/min Sanding belt dimensions: 200 mm width x 1600 mm length Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed drive: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Fpodpev D Rg Defx Abwsn Extraction air volume: 2 x 2000–2500 m³/h at 20–25 m/sec Extraction port: 2 x 160 mm diameter, top-mounted in the machine frame External dimensions: length: 1600 mm ...

Stav: nový, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 2 - 180 mm LÖWER - DoubleMaster DSM 2000 DB ----- Double-sided single-wood sanding machine with additional cross brush sanding unit (discs) and longitudinal brush sanding unit (roller) for sanding solid wood, e.g. window profiles, etc. Robust top-quality design with long cast-iron tables and conveyor belt feed. Suitable for heavy-duty use even with higher chip removal rates. 1. Belt sanding unit with CERMET sanding shoe for pre-sanding 2. Disc unit for transverse sanding and fiber removal 3. Roller unit for longitudinal sanding to achieve a directional finish in the grain direction - Staggered arrangement of sanding and finishing units on top and bottom - Directly driven, rubber-coated sanding rollers for slip-free power transmission - Combined sanding via roller and shoe for high chip removal with a consistently flat contact zone - Maintenance- and wear-free CERMET-coated sanding shoes offering excellent heat conductivity and absolute dimensional stability - External cooling of the sanding areas for cooler operation and longer sanding belt life - Force-guided, pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tensioning rollers - Integrated brush sanding device (cross and longitudinal) with dust extraction - Motorized thickness adjustment via precision leadscrews and large-diameter linear ball bearing units on hardened and ground precision shafts with dust and dirt protection - Adjustment of material removal (bottom) via precision leadscrew and scale ring (resolution 0.1 mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Quick sanding belt change with pneumatic belt release in seconds - Adjustment option for sanding belt tracking when changing belts - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for excessively thick workpieces - Workpiece transport via calibrated, slip- and adhesive-proof conveyor belts over heavy-duty, 1000mm long cast-iron tables with ultra-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gearbox motor steplessly adjustable for rapid adaptation to different wood types - All motors electrically protected - Ergonomically arranged control elements at the workpiece infeed side - Digital thickness display (resolution 0.1 mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Two brake motors for drive: 5.5 kW - Feed motor: 1.0 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Brush sanding units: Disc D=max. 200 mm Roller D=max. 270 mm - Extraction ports: 2 x 120 mm and 2 x 180 mm - Pneumatic connection: 6 bar - Working height: 870 mm External dimensions: - Length: 2600 mm - Length with rollers: 2985 mm - Width: 880 mm Fsdpfxsyrty He Abwspn - Height: 1910 mm - Weight: approx. 1500 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE version ----- Price for the above machine on request! ----- Special accessories at extra cost: Workpiece blow-off - medium...

Stav: veľmi dobrý (použitý), Rok výroby: 2002, číslo stroja/vozidla: 10229, Funkcionalita: plne funkčný, prevádzkové hodiny: 25 000 h, výkon: 13 kW (17,68 k), vstupné napätie: 400 V, vstupný prúd: 32 A, vstupná frekvencia: 50 Hz, typ vstupného prúdu: trojfázový, šírka brúsneho pásu: 200 mm, dĺžka brúsneho pásu: 1 800 mm, brúsna výška: 190 mm, typ nastavenia výšky: elektrický, typ ovládania: elektrický, celková výška: 1 890 mm, celková dĺžka: 2 070 mm, celková šírka: 1 020 mm, celková hmotnosť: 1 500 kg, Výbava: Označovanie CE, dokumentácia / manuál, Stroj je vo veľmi dobrom stave, málo používaný, s možnosťou generálnej opravy po dohode. Fpedpfeyt Hkuex Abwon

Stav: veľmi dobrý (použitý), Karuselová frézka RYE 40 SM SPEEDMAX Počet agregátov: 3 Fpjdpfx Absxf Iudowon Usporiadanie agregátov: Frézka Frézka Brúska Pneumatický centrálny prítlak materiálu