Winter Brúska Na Profily kúpiť použité (100 302)

Stav: použitý, Rok výroby: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor, water-cooled, 9.8 kW - Marposs tool measuring system - Active longitudinal positioning - Kel-Set - GAP sensor (contactless by ELASO) at T1 and T2, integrated in the control interface - GAP at T3/T4 via fluid sensor - Semi-automatic balancing by ELASO for T1/T2, integrated into the control interface - Tailstock hydraulic, with fine adjustment +/-150 μm - Dressing device on the lower table, workpiece spindle side - Dressing device on the lower table, tailstock side - Dressing device on the upper table - New, service-friendly and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle headstock with direct drive *Strongly recommended for non-circular grinding *Workpiece weight (chucked): max. 75 kg *Workpiece weight (between centres): 150 kg *Water-cooled *MK5 combined with short taper mounting DIN 55026 *Oriented spindle stop *Fixed lower part B-axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL RETROFIT: - Complete overhaul according to Kellenberger measuring protocol - Newly painted Hydraulics unit new: - Improved temperature control (oil cooler) - Energy saving: only one pump, not running continuously - Pressure monitoring - Monitoring of water content in hydrostatic oil (Early detection of bellows damage) Lhjdjuxfu Nepfx Aqiel Hydrostatic leadscrew in X: - Wear-free due to no contact during operation - No loss of accuracy, even under continuous full load at max. speed - Frictionless at low speeds - No stick-slip effect at low speeds - Precisely transmits even the smallest rotational movements - No backlash in case of change in rotational direction - No fluctuation in friction torque due to ball circulation - Higher axial rigidity than ball screws - Significantly better damping, leading to improved surface finish and tool life - No vibrations from ball return - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor, higher accuracy, significantly lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling capacity needed compared to linear motors ELECTRICAL RETROFIT: - New, modern CNC CYLINDRICAL GRINDING MACHINE controller with BEMA grinding interface - Completely new electrical cabinet - New drive technology - Replacement of all wiring, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) CONTROL SYSTEM: The grinding software consists of a base license and various options available depending on the machine's configuration. Software base: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Ledpfx Aqed Ih Dveishl Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling range: 360° Grinding spindle head swivelling range: 180° +/- Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (chucked): 130 kg incl. clamping fixture Internal spindle fit: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a world-leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but also offer comprehensive service for your machines. Geometrically overhauled and newly painted, with original electrics but new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display in two axes. X-axis resolution 0.5µm Available options at extra charge: - Upper table swivel angle display - Encoder with digital display in the workhead - Encoder with digital display in the grinding spindle head (no vertical adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to a maximum of 225 mm Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently meet the essential safety and protection requirements as specified in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum safety requirements.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swivelling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. chucking Max. cross travel: 270 mm Internal spindle mount: 80 mm Tailstock sleeve taper: MK3 Sleeve travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space required approx.: 4 x 2 m Overhauled to Kellenberger standards Including new, modern, and future-proof CNC control system. Photo shows a previously delivered machine with special options. Lhjdeuxftrepfx Aqijl - Operation via touch panel is exceptionally user-friendly. - The symbols on the control panel are practically identical to the original controls, eliminating the need for retraining. - Diagnostic function with PLC status and digital I/O display. - Dressing function can be expanded or modified upon customer request. - Workpiece spindle stop in angular position available on request. - New maximum infeed amount 40 mm, can be further increased on request. - Digital position display in 2 axes. Resolution X-axis 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (height adjustment with the spindle not possible) - New sturdy internal grinding attachment, diameter 80 mm or 100 mm - Increase of centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application possibilities in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control This machine tool does not currently meet the essential safety and protection requirements as defined in the BetrSichV 2015 workplace safety regulation. The required minimum protection level must be determined through a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine has been overhauled according to Kellenberger test protocol and freshly repainted. The susceptible Güttinger control system has been replaced by the modern BEMA X control system. This means the machine also received a completely new electrical system as part of the upgrade. Machine equipped with reinforced workpiece spindle stock for plunge grinding of heavy workpieces. Lhjdpjvq R Uzefx Aqiel The machine does not currently comply with the essential safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2000, Priemer brúsneho kotúča: 500 mm Dĺžka brúsnej dráhy: 1000 mm Výška medzi hrotmi: 250 mm Stroj bol čiastočne repasovaný, s novou geometriou a používal sa len niekoľko týždňov, kým nebol opäť predaný z dôvodu úpadku. - rozsiahla údržba - nová geometria stola - čiastočné lakovanie interiéru Brúsne kotúče: - ĽAVÁ strana: 400 x 63 x 127 mm (štandard) - PRAVÁ strana: 300 x 40 x 127 mm Vnútorné brúsne zariadenie: Ø 120 mm pre vysokofrekvenčné vretienka CNC riadenie: KELCO 120 C-osa pre neokrúhle brúsenie. Kel-Poly B-OSA: CNC-riadená B-osa KELCO 120: v = konštantných 35 m/s alebo 45 m/s Vysokofrekvenčné vreteno pre vnútorné brúsenie Prevádzková jednotka pre vretienka MFV a MFZ Hydraulický posuv vreteníka pre ustredovacie zariadenie Žiadne mikro nastavenie na ustredovacom zariadení Pružný vklad vreteníka Ledpfxoxzk Nio Aqiohl Chladenie horného stola Štandardné ustredovacie zariadenie MK 5 DIN 55026, veľkosť 5" MIKRO nastavenie pre štandardné ustredovacie zariadenie Zariadenie na dorovnávanie na spodnom stole Aktívne longitudinálne polohovanie KELPOS, MARPOSS, namontované na brúsnej hlave Systém na meranie nástrojov KELSET, MARPOSS Snímač pre hrubé obrábanie MARPOSS Meracie riadenie MARPOSS Minialsar, pripravené Filter z papierovej pásky

Stav: použitý, Rok výroby: 2010, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Control: Fanuc 310is CNC control: GE Fanuc 310is Hand panel for GE Fanuc CNC control Overhauled according to Kellenberger protocol Rotary part with automatic indexing, 1° Grinding head UR 1-2-3 Grinding wheel equipment left: 500 x 80 mm Grinding wheel equipment right: 400 x 63 mm Operating unit for high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through workpiece spindle Dressing device on upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH infeed sensor and KEL-BALANCE balancing units KEL-TOUCH infeed sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at workpiece spindle head for internal and external grinding Prepared for measuring controls Movomatic ESZ 400 or Marposs P7 ME Preparation for external filter Coolant cut-off for table devices Full enclosure for emulsion Grinding mist extraction system for emulsion Maintenance unit for pneumatic auxiliary functions Lhedpfx Aqey U N Hieijl Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: measuring probe C25 Hydraulic preparation for steady rest Arobolünette

Stav: použitý, Grinding diameter: 350, 450 mm Lheded Ih D Eopfx Aqisl Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivels: 360° Grinding head swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001-0.030 mm/Ø Continuous infeed: 0-0.95 mm/Ø Table swivels: ±10° Table longitudinal travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg including chucking system Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Required space approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhauls and retrofits, we are not only able to deliver machines in like-new condition with warranty, but also offer overhaul and repainting services for your machines in metric execution. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the flat bed of the X-axis, as well as air lift-off in the grinding headstock. BEMA standard equipment includes: - Digital read-out in 2 axes. X-axis resolution: 0.5 µm - Spindle speed display for grinding spindle - Infinitely variable speed control for grinding spindle (70-100%) - Infinitely variable speed control for internal grinding spindle (70-100%) - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional extras (at additional cost): - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding headstock (no height adjustment possible with spindle) - Sine bar - New robust internal grinding attachment (80 mm or 100 mm diameter), with height adjustment - Increase in centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, all of our completely refurbished machines come with a 12-month warranty (valid only in neighbouring countries). Further accessories available on request. Please note: At present, the machine tool does not meet the fundamental safety and protection requirements as described in the BetrSichV 2015. The increase of the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling range: 360° Grinding headstock swivelling range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Lodpfod Ih D Nsx Aqishl Maximum workpiece weight (between centres): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a globally leading company in the field of Kellenberger overhaul/retrofit, we are able not only to deliver machines in as-new condition and with warranty but also to provide comprehensive service for your machines, including full metric overhaul and new paintwork. Version R: The machine features central lubrication and roller guides in the X-axis flat slideway, as well as air lift for the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional extras (available at additional cost): - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New heavy-duty internal grinding attachment, 80mm or 100mm diameter, with height adjustment - Increase of centre height up to max. 225 mm - Variable speed drive for the grinding spindle Included equipment: - Operating tools - Collet tube for chuck Further accessories available on request. This machine tool currently does not meet the fundamental safety and protection requirements as specified in the BetrSichV 2015 (German Industrial Safety Regulation). The necessary minimum safety objectives must be determined via a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Lhodped Ih Dwjfx Aqijl Table swivelling: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – overhung: 130 kg incl. clamping Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show a similar 1,000 mm machine. Includes: - New electrical cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Air lift grinding headstock - Modern internal grinding attachment - Operating tools Upper table swivelling extension to 10° Options: - Upper table swivel angle display - Workpiece headstock swivel angle display - Grinding headstock swivel angle display - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Stav: použitý, Grinding diameter: 250, 350, 450 mm Lhsdpfx Asd Ih D Rsqisl Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling range: 360° Grinding headstock swivelling range: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight, cantilevered: 130 kg incl. clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 × 2.0 m Completely overhauled machine according to Kellenberger standards - Workpiece spindle drive upgraded to modern three-phase technology - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Optional extras at additional cost: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment via spindle not possible) - New heavy-duty internal grinding attachment with diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet for chuck Further accessories available on request.

Stav: použitý, Rok výroby: 2006, Brúsny priemer 350 mm Brúsna dĺžka 1000 mm Výška hrotov 175 mm Hmotnosť stroja cca 3,5 t Stroj kompletne generálne opravený v štýle BEMA s 12-mesačnou zárukou Mechanicky a vizuálne ako nový Fotografia novo dokončeného stroja s čiastočne inými možnosťami výbavy. Ovládanie Fanuc 21i -Brúsna hlava UR 1-2-3 vonkajšie/vnútorné/čelné brúsenie Lhjdpet Ii Nbofx Aqisl -B-os automaticky 1° Hirth ozubenie -Aktívne pozdĺžne polohovanie KEL-POS Movomatic -Polautomatické vyvažovacie zariadenie KEL-BALANCE -Pravé brúsne koleso s priemerom 400 mm -Ľavé brúsne koleso s priemerom 300 mm -Zariadenie na vnútorné brúsenie s remeňovým pohonom -Koník s mikro-nastavením -Jemné nastavenie horného stola -Pásový papierový filter SBP4 240 l

Stav: použitý, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Ledpfouxft Esx Aqishl Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: použitý, Rok výroby: 1997, Brúsny priemer 350 mm Brúsna dĺžka 1000 mm Výška hrotov 175 mm Lhjdpfxoy R Ed No Aqijl Hmotnosť stroja cca 6 t Predaj prebieha s funkčnou skúškou Na želanie s novou geometriou stola za príplatok C-os na brúsenie polygónov B-os s ručným natáčaním Priemer brúsneho kotúča vľavo 400 mm Priemer brúsneho kotúča vpravo na vyžiadanie Zariadenie na vnútorné brúsenie Koník s jemným nastavením

Stav: použitý, Rok výroby: 1999, Brúsiaci priemer 350 mm Lsdpfoy U N Hpex Aqijhl Brúsiaca dĺžka 1000 mm Výška hrotu 175 mm Ovládanie FANUC 18i-TA GENERÁLNE OPRAVENÉ Fotka podobného už dodaného stroja - Brúsny kotúč VĽAVO 500 mm - Brúsny kotúč VPRAVO 400 mm - Vnútorné brúsne zariadenie 120 mm pre remeňom poháňané vnútorné brúsne vretená (štandard) - CNC riadenie FANUC 18i-TA - Pripravené na meraciu riadiacu jednotku Marposs kombinovanú (Minialsar, Positionar) s E5N - Os B - Kel-Set - Hydraulický spätný chod pinoly - Mikronastavenie na koníku - Hlavné vreteno s otočnou spodnou časťou

Stav: použitý, Priemer brúsneho kotúča: 450 mm Dĺžka brúsenia: 1000 mm Výška stredovej osi: 225 mm Fotografie už dodaných strojov. Mechanická renovácia: -kompletná renovácia stroja podľa protokolu Kellenberger -nová, užívateľsky príjemná kabína -nový náter Elektrická renovácia: Lhedpfx Aqozkvucjijl -ovládanie FANUC s BLUE-SOLUTION -nový rozvádzač -nová pohonná technológia -výmena všetkých elektrických káblov, tlakových spínačov Berus atď. -nové absolútne sklenené meradlá v osiach x a z -nový absolútny rotačný enkodér (na osi B) Fotografie už dodaného stroja s inými možnosťami. Variant brúsnej hlavy UR/RS: -usporiadanie brúsnych kotúčov pre vonkajšie a šikmé brúsenie za sebou! -vďaka tomu je priemer každého kotúča 400 mm! -vďaka tomu je výrazne nižšie riziko kolízie -jednoduchšie programovanie -vybavenie brúsnymi kotúčmi: 400 x 63 x 127 mm -zariadenie na prevádzku HF vretienka -vreteno voliteľné za príplatok -os B je riadená CNC na vonkajšie, plošné a vnútorné brúsenie v jednom upnutí. Rozsah natočenia: +10° / -270° -os C na polygonálne brúsenie -dolná časť je pevná -motor brúsnej hlavy: 10,0 kW -lunetový stred -merací systém Marposs na meranie brúsnych kotúčov -pozícia v dĺžke: Marposs

Stav: použitý, Rok výroby: 1995, Brúsny priemer 350 mm Lodpfx Asy R Ed Asqishl Brúsna dĺžka 1000 mm Výška hrotu 175 mm Ovládanie Kelco 90 Hmotnosť stroja cca 6 t Predaj s funkčnou skúškou Nová geometria stola podľa požiadavky za príplatok Osa B plynulo nastaviteľná Priemer brúsnych kotúčov vľavo a vpravo 400 mm Zariadenie na vnútorné brúsenie Koník s jemným nastavením Sínusové pravítko na WSS Kel-Set Pasívne pozdĺžne polohovanie Movomatic TMP91

Stav: použitý, Brúsny priemer 250, 350, 450 mm Brúsna dĺžka 1000 mm Výška hrotu 125, 175, 225 mm Priemer brúsneho kotúča 400 mm Šírka brúsneho kotúča 50 mm Otvor (upnutie kotúča) 127 mm Kužel vretien na obrobok MK5 Otáčky vretena na obrobok 20-400 min⁻¹ Vreteno na obrobok otočné 360° Brúsny vreteník otočný 180° ± Otáčky brúsneho vretena 1500, 1700, 2200 min⁻¹ Prísuv (prerušovaný) 0,001-0,030 mm/Ø Prísuv (spojitý) 0-0,95 mm/Ø Stôl otočný ±8° Pozdĺžny pohyb stola 1300 mm Rýchlosť stola 0,02-6 m/min Hmotnosť obrobku medzi hrotmi 130 kg Max. hmotnosť obrobku na konzolu 130 kg vrátane upnutia Vnútorný otvor vretena 70 mm Celkový príkon 6,5 kW Hmotnosť stroja cca 2,5 t Pôdorys cca 4,2 x 2,0 m Okamžite k dodaniu, samozrejme s 12-mesačnou zárukou! Geometricky repasovaný a novo lakovaný s novou elektroinštaláciou. V KELLENBERGER kvalite! - Digitálny odpočet v 2 osiach. Rozlíšenie os X 0,5 µm - Moderný vretenník na obrobok s kužeľom MK5 - Moderný koník s kužeľom MK3 - Moderná hydraulická jednotka - Papierový pásový filter Ďalšie príslušenstvo na požiadanie Ljdpev I Eq Ssfx Aqiehl Stroj v súčasnosti nespĺňa základné bezpečnostné a ochranné požiadavky uvedené v BetrSichV 2015. Určenie požadovaného minimálneho bezpečnostného cieľa je potrebné stanoviť posúdením rizík podľa BetrSichV.

Stav: použitý, Priemer brúsenia 350 mm Dĺžka brúsenia 1000 mm Výška hrotov 175 mm Potrebný priestor cca 3,6/3,5 m Ako celosvetovo vedúca spoločnosť v oblasti generálnych opráv/retrofitov Kellenberger zabezpečujeme nielen dodávky strojov v kvalite nového stroja so zárukou, ale ponúkame aj servis pre Vaše stroje: Rad Kellenberger Kel-Varia so systémom riadenia Kelco 90. Mechanická generálna oprava: - Kompletná generálna oprava stroja podľa testovacieho protokolu Kellenberger - Nová servisne priateľská kabína - Nové lakovanie Elektrická generálna oprava: Ljdouwv H Hjpfx Aqijhl - Nové, moderné CNC ovládanie brúsok na guľato s rozhraním BEMA - Nový rozvádzač - Nová pohonná technika - Výmena všetkých elektrických vedení, tlakových spínačov Berus atď. - Nové absolútne sklenené odmeriavacie pravítka v osiach X a Z - Nový absolútny rotačný snímač (pre B-os) Štandardná výbava: - Pevný koník s kužeľom MK5, voliteľne s adaptérom MK5/krátky kužeľ - Otočný koník s kužeľom MK4, voliteľne s jemným nastavením - Brúsne vretená T1/T2/T3 - T1 - priemer brúsneho kotúča 400 mm - T2 - priemer brúsneho kotúča 300 mm - T3 - zariadenie na vnútorné brúsenie, pohon cez brúsny motor remenom - Brúsny motor 4,4 kW - B-os s vysokým rozlíšením - Merací systém Marposs pre meranie brúsnych kotúčov - Pozdĺžne polohovanie Marposs - GAP Control (senzor na brúsnom vretene) ELASO integrované do systému riadenia - Polautomatické vyvažovanie ELASO integrované do systému riadenia - BEMAT meranie brúsnych kotúčov Voliteľná výbava za príplatok: - Vysokofrekvenčné vnútorné brúsne vreteno - Vysoko presný, maximálne tuhostný vreteník obrobku - Merací riadiaci systém - Odsávanie - Pásový papierový filter Ovládanie: Základné brúsne cykly: - Nulovanie obrobku s pozíciou Z (pozdĺžne polohovanie) - Meranie brúsneho kotúča s BEMAT - Senzor priblíženia GAP - Meranie diamantov na orovnávanie - Korekcie - Vonkajšie a vnútorné valcové brúsenie (kyvné a priečne brúsenie) - Vonkajšie a vnútorné kužeľové brúsenie (naklápanie B-osy, orovnávanie s rovným kotúčom) - Vonkajšie a vnútorné rádiusové brúsenie (rádius orovnaný na kotúči) Voliteľné brúsne cykly: - Profilové priečne brúsenie vonkajšie a vnútorné s profilovým kotúčom - Profilové brúsenie vonkajšie a vnútorné s rovným kotúčom - Jedno a viacchodové vonkajšie a vnútorné závitové brúsenie s voľne voliteľným uhlom bokov - Brúsenie trapézových závitov - Neokrúhle/brúsenie mimo osy vonkajšie a vnútorné Cena 15 000 €

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Lsdpfx Asd Ih D Heqiehl Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table movement: 1,300 mm Table feed rate: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows similar machine with 225 mm centre height Version R: Machine equipped with central lubrication and roller guideway in the X-axis flat guide, as well as air lift in the grinding headstock. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on workpiece headstock - Rotary encoder with digital readout on grinding headstock (height adjustment by spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Variable speed control for grinding spindle Includes: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine tool currently does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). A risk assessment pursuant to BetrSichV is required to determine whether the minimum safety objectives can be increased accordingly.

Stav: použitý, Rok výroby: 2026, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping device Internal spindle mount: 80 mm Total connected load: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m Completely overhauled and upgraded to the latest technology. - New control cabinet - Modern hydraulic unit - Modern workhead - Modern tailstock with fine adjustment - Modern control block, infeed, gearbox - Internal grinding attachment for spindles with 80 mm diameter - Swivel angle display for grinding headstock - Grinding angle display on upper table - Pneumatic lift-off for the upper table - Tailstock with fine adjustment - Sine ruler - Stepless grinding spindle speed control 70–100% - Stepless internal grinding spindle speed control 70–100% - Optional conversion to separate internal grinding spindle drive with cooling and continuously adjustable internal spindle speed 0–100% - Splash guard doors for Z-axis Options: Swivel angle display for workhead Ljdpfxsy R Edvj Aqiohl Swivel angle display for grinding headstock Swivel angle display for upper table Partial enclosure on X-axis as well as special requests

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Lhodpfouxfupox Aqiol Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180 ±° Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0–9.99 mm/Ø Continuous feed: 0–9.99 mm/Ø Table swivel: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg including clamping Internal spindle mount: 80 mm Tailstock quill taper: MT3 Quill stroke: 30 mm Power requirement: approx. 6.5 kW Machine weight: approx. 3.05 t Space required: approx. 4 x 2 m Overhauled according to Kellenberger guidelines, including a new, modern, and future-ready control system. Photo shows a previously delivered machine. - Operation via touch panel is extremely user-friendly. - The symbols on the control panel are practically identical to the original controls, so no retraining is necessary. - Diagnostic functions with PLC indications and digital I/O display. - Dressing functions can be expanded or modified to customer specifications. - Spindle orientation stop for the workpiece spindle available upon request. - New maximum infeed: 40 mm, expandable upon request. - Digital readout on two axes. X-axis resolution: 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New robust internal grinding device, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse table feed. Versatile applications in production for external cylindrical and internal grinding or for external, face, and internal grinding in a single setup of individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Current safety compliance: The machine tool does not currently meet the fundamental safety and protective requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). The required minimum safety level must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2010, Brúsny priemer: 350 mm Brúsna dĺžka: 1000 mm Výška hrotu: 175 mm Riadenie: Fanuc 310is Kompletne mechanicky repasovaný. Lhedpfx Ajvdk N Esqisl Vrátane brúsneho procesu a nastavenia na jeden kus. Originálna fotografia stroja z výstavy EMO 2010. CNC riadenie GE Fanuc 310is Ručný panel pre CNC riadenie GE Fanuc S Wenger podávačom Otočný diel s automatickým indexovaním po 1° Brúsna hlava UR 1-2-3 Brúsny kotúč vľavo 500 x 80 mm Brúsny kotúč vpravo 400 x 63 mm Prevádzková jednotka pre vysokofrekvenčné vnútorné brúsne vreteno MFV / MFZ Vysokofrekvenčné vnútorné brúsne vreteno MFN 1090 Chladenie cez vreteno obrobku Zariadenie na orovnanie na hornom stole Otočný držiak pre PKD diamantové platne Základný modul pre KEL-TOUCH snímač kontaktu nástroja a KEL-BALANCE vyvažovaciu jednotku KEL-TOUCH snímač pre univerzálne varianty brúsnej hlavy R / RS / UR / URS KEL-TOUCH na hlavnom vretene pre vnútorné a vonkajšie brúsenie Príprava pre meracie ústrojenstvá Movomatic ESZ 400 alebo Marposs P7 ME Príprava pre externý filter Vypínanie chladiva pre stolové zariadenia Plné opláštenie pre emulziu Odsávacie zariadenie na brúsny hmlový emulzia Servisná jednotka pre pneumatické prídavné funkcie Príprava pre nakladač portálu KEL-VITA KEL-POS, MOVOMATIC: Merací snímač C25 Hydraulická príprava pre lunetu Arobo

Stav: použitý, Rok výroby: 1961, Grinding length 4000 mm Grinding width 1100 mm Lhjdpfxovk Nllj Aqiol Workpiece height 1100 mm Machine weight approx. 21 t Modernized Precision Surface and Guideway Grinding Machine From a reconditioning operation. Among other items, beds for new KERN lathes were ground with this machine. – Digital readouts retrofitted – Conversion to recirculating ball screws on the cross axis – Grinding spindle for peripheral grinding – Swiveling grinding spindle for relief operations – Original hand scraping on the longitudinal axis – Electrical system overhauled – Clamping table area 4300 x 1500 mm With the use of a pit, significantly taller workpieces can be ground!

Stav: použitý, Rok výroby: 1982, Brúsny priemer 630 mm Brúsna dĺžka 600 mm Lhsdpsv Dxxzjfx Aqiel Výška hrotu 320 mm Stroj so zosilneným vretenníkom na obrobky na vyložené brúsenie ťažkých obrobkov. Stroj prechádza veľkou údržbou/čiastočnou generálnou opravou vrátane geometrického protokolu podľa smerníc pre nové stroje Kellenberger. Obrábací stroj v súčasnosti nespĺňa základné požiadavky na bezpečnosť a ochranu, ako je uvedené v BetrSichV 2015. Stanovenie požadovaného minimálneho cieľa ochrany sa určuje prostredníctvom posúdenia rizika podľa BetrSichV.

Stav: použitý, Rok výroby: 1995, Brúsiaci priemer 350 mm Brúsiaca dĺžka 1000 mm Výška stredov 175 mm Čiastočne repasovaný stroj s meracím protokolom podľa tolerancií nového stroja Lhjdpjyatx Ssfx Aqijl NOVÉ riadenie Eckelmann ENC s brusiacim softvérom BEMA Numericky riadená os B Vnútorná brúsna jednotka priemer 80 mm Brúsny kotúč vľavo priemer 400 mm Brúsny kotúč vpravo priemer 300 mm Vnútorné brúsne vreteno HJN 828 Hydraulická koníková podpera Mikronastavenie Merací systém KEL SET