Roaches Färbemaschine kúpiť použité (121)

Rok výroby: 1956, stav: použitý, číslo stroja/vozidla: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3,450 kg Machine No.: 1413 General / Technical Data: Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Pulling force: 13,000 kg (maximum) Broaching length: 1,200 mm Hedpfx Asdbmgmocyjr Broaching stations: 3 units Distance between broaching stations: 100 mm Draw head clamping diameter: Ø 85 mm Passage width between cylinders: max. 390 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,150 x 1,500 x 3,725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s pull bridge features 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system as well as the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing uptake of the tool feeder is also designed for only 1 tool (central broaching station). The machine has an integrated coolant system for cutting oil. Remarks: The machine is in a condition appropriate to its age and is immediately ready for use. It is designed for manually operated production with medium batch sizes. The machine provides an automatic operation cycle. Use ideally requires a pit installation or alternatively a platform. Draw heads, tool holders & tools are available on request. The machine can be inspected under power at our warehouse.

Rok výroby: 1951, stav: dobrý (použitý), číslo stroja/vozidla: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2,750 kg Machine no.: 1133 General / Technical data: Hydraulic horizontal broaching machine in good, ready-to-use condition Broaching stroke: 1,500 mm Broaching positions: 1 piece Tensile force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shanks up to 26 mm width Through hole in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (without working area) Hjdpfjdcdrpox Acyer Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant / cutting fluid system • The machine features an oil and chip tray with a tool feed carriage Remarks: The machine is ideal for manufacturing keyways and profiles. The machine runs smoothly and is clean in the guidance and cylinder areas. Broaching needles and broaching mandrels can be supplied upon request. The machine is available for inspection, powered, and ready for demonstration at our warehouse.

Rok výroby: 1980, stav: dobrý (použitý), číslo stroja/vozidla: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Pulling force: 25,000 kg Broaching length: 2,000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Chuck diameter for pull heads: 3 x Ø 100 mm Clear width between cylinders: nominal size 500 mm Clear width between cylinders (measured): max. 590 mm Cutting speed: hydraulically stepless, adjustable from 1 m/min up to max. 10 m/min Hedpsdffzfjfx Acyor Return speed: hydraulically stepless, adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3,400 mm x 3,400 mm x 6,900 mm (without pit) Power supply / connected load: 380 V, 50 Hz / 22 kW Accessories / special equipment: Currently, the machine is supplied without a workpiece table. Originally equipped with a sliding workpiece table and a special clamping device for external broaching (workpiece sliding table can be modified). The tool clamping system features hydraulic locking both in the pull bridge and the feed unit. The machine is fitted with a coolant system including an integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. Designed for use in series production; for optimal usage, a foundation (pit) is ideally required. Pull heads and ejector needles are available upon request. The machine can be inspected at our warehouse.

Rok výroby: 1958, stav: použitý, číslo stroja/vozidla: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2,500 kg General / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Pulling head diameter: Ø 85 mm Clear width between cylinders: max. 280 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connection: 380 Volt 50 Hz / 4 kW Accessories / Special Equipment: The machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). The machine is fitted with an integrated coolant system. A double pull head for 2 flat broaching tools with workpiece support plate is included. Remarks: Hjdpoda Ugiofx Acyor The machine is in age-appropriate good condition and is ready for immediate use. It is designed for manually operated production with medium batch sizes. Ideally, the machine requires a pit or alternatively a platform for operation. Pulling heads are available on request. The machine does not have an automatic tool feeder. The machine can be inspected under power at our warehouse.

Rok výroby: 1982, stav: dobrý (použitý), číslo stroja/vozidla: 3120, Manufacturer: Varinelli Milano Italy Model: BV 25 x 2000 x 630 Year of manufacture: 1982 Machine No.: 3120 Hodpfx Aed I R Ngjcyjr Weight: 13,000 kg General / Technical Data: Vertical hydraulic internal broaching machine with 3 broaching stations and movable workpiece table in good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 Distance between broaching stations: 200 mm Passage width between cylinders: max. 630 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 9 m/min Return speed: hydraulically steplessly adjustable up to max. 18 m/min Machine space requirement: see machine layout diagram (image) Power supply / connection rating: 380 Volt 50 Hz / 43 kW Accessories / Special Equipment: The machine is equipped with a workpiece sliding table for 3 broaching stations. The tool clamping system features a spring-actuated locking mechanism (DIN 1417) in the pull bridge. The tool feed system is hydraulically-mechanically locked. The machine has a coolant system with an integrated chip conveyor for installation in a pit. Remarks: The machine is in good condition and still has its original paintwork. It is designed for use in series production for medium and large batch sizes; for optimal utilization, a foundation (pit) is ideally required. Pulling heads and pilot retractors are available upon request. The machine can be inspected at our warehouse.

Stav: dobrý (použitý), Rok výroby: 1980, číslo stroja/vozidla: 20007, Technické údaje: Hsdpfx Acjyfgc Isyor - Šírka brokovacej ihly do 10 mm - Dĺžka brokovacej ihly do 1000 mm - Ťahová sila 1,5 t - Pracovná rýchlosť 4 m/min - Pracovná / obslužná výška 1000 mm - Pohon 400 V / 1,5 kW - Priestorová náročnosť cca Š 1500 x V 1000 x H 400 mm - Hmotnosť cca 200 kg

Stav: dobrý (použitý), Preťahovacia / brokovacia stroj KARL KLINK RSI 2,5 EH -Rok výroby: 1965 -Ťahová sila: 2500 kg / (25 kN) -Rýchlosť brokovania: 1 mm/min až 9 mm/min (plynulo nastaviteľná) -Max. zdvih: 800 mm -Max. priemer obrobku: cca 250 mm -Motor: cca 3 kW -Chladiace zariadenie -Ukazovateľ ťahovej sily -Obmedzovač ťahovej sily Hedsymz N Eopfx Acyer -Rôzne vodiace puzdrá (viď fotografie) -Stroje nohy Rozmery: DxŠxV 1,1 x 0,7 x 2 metre / Hmotnosť 1600 kg Vyhradzujeme si právo na chyby a nesprávne údaje.

Rok výroby: 1972, stav: použitý, max. trhacia sila: 10 t max. zdvih: 1 250 mm max. rezacia rýchlosť: 10 m/min max. rýchlosť spätného chodu: 25 m/min broaching stations: 3 ks priechodzia šírka: 470 mm vzdialenosť broaching staníc: 125 mm stôl: 400 x 400 mm Špeciálne vybavenie: odvod triesok pomocou permanentného magnetického dopravníka triesok 1 hydraulika, 1 pracovná plošina, elektrické hydraulické upínanie držiaka drieku a koncového kusu, automatické podávacie zariadenie Hodpfxocdtnhj Acyor

Rok výroby: 1987, stav: použitý, číslo stroja/vozidla: 34, Max. ťažná sila: 10 t Max. zdvih: 1000 mm Rýchlosť rezania: 7,5 m/min Rýchlosť spätného chodu: 24 m/min Hmotnosť: 6,2 t Hedpfond Dmjx Acyer Stroj je vhodný na čistenie rúr.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Rok výroby: 2025, celková hmotnosť: 370 kg, výkon: 3,5 kW (4,76 k), vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, dĺžka protahovania: 800 mm, rýchlosť brokovania: 3 m/min, celková dĺžka: 920 mm, celková šírka: 800 mm, celková výška: 1 950 mm, Manufacturer: Rausch (Haan/Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370 kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch Pulling force: 3,000 kg (30 kN) Broaching speeds: 3 m/min and 6 m/min Return speed: 3 m/min Maximum stroke: 800 mm Maximum tool length: 1,000 mm Table size / working area: 340 mm x 220 mm / 430 mm x 310 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited (without splash guard enclosure) Dimensions (H x W x D): 1,950 mm x 820 mm x 900 mm (H = table height to floor without attachments) Motor: 3.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special Equipment: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds, 3 m/min & 6 m/min Hedpfeytvyxex Acyor - External stroke adjustment, machine-wide reproducible tool length adjustment system - Integrated coolant system with check valve and drain tap, as well as selector switch for automatic mode (not switching automatically in swivel mode) - Patented coolant/lubricant swivel system - Three-sided closed, front-open splash guard enclosure (no external control panel) - Machine housing below the safety door with chip guard and tool storage area - Routing of electrical cables in protective steel conduits - Electrical monitoring of clamping jaws (tool removal control to prevent unintentional return of the drawbridge) - Safety door with integrated emergency stop function - Control panel made of stainless steel sheet with permanent labelling - 4 central lubrication points for trapezoidal spindle drive - Machine documentation Remarks: The machine has been completely overhauled, and the machine body has been fully reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made of cast, wear-resistant bronze - All bearings and seals have been replaced - The central drive shaft is new - The coolant system (pump, check valve, and drain tap), including coolant/lubricant swivel system, is new - The clamping jaws are new (drawbridge additionally reinforced) - A switchable clamping jaw monitoring system has been installed (additional safety for operator & tool breakage) - A safety door with safety monitoring has replaced the rubber intrusion guard - The tool length adjustment system has been relocated outside of the machine area - Additional end position limit switches have been installed - The entire electrical system (control cabinet) with Siemens components is new - Control panel in stainless steel with permanent marking - New gear drive motor (SEW) with toothed belt drive - The machine has been newly painted with 2-component structural paint The machine is in our warehouse and can be inspected under power.

Rok výroby: 1971, stav: veľmi dobrý (použitý), Horizontálna vnútorná obrážacia stroj Arthur Klink RIW 16x1800 -WAG 718- Výrobca: Arthur Klink Typ: RIW 16 x 1800 Rok výroby: 1971 Max. ťažná sila: 16 t Max. zdvih: 1800 mm Max. rýchlosť rezu: 7 m/min Hodpfxjhpqque Acyer Max. spätná rýchlosť: 25 m/min Max. priemer nástroja: Ø 95 mm Hmotnosť: 4,8 t

Rok výroby: 1983, stav: veľmi dobrý (použitý), číslo stroja/vozidla: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition. Pulling force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Hsdpfxsd Nb A No Acysr Cutting speed: hydraulically variable from 1 m/min up to max. 10 m/min Return speed: hydraulically variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the pull bridge. The needle lifter heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system featuring an integrated magnetic belt chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal utilization, installation in a foundation pit is recommended. Draw heads and needle lifters are available on request. The machine can be inspected in our warehouse.

Stav: pripravené na použitie (použité), Rok výroby: 1998, celková hmotnosť: 2 900 kg, výkon: 8 kW (10,88 k), vstupné napätie: 380 V, počet broachovacích poloh: 1, celková šírka: 6 100 mm, celková výška: 1 900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Hedpfx Acjxtcz Ieyor Machine No.: 1194 General / Technical Data: Hydraulic internal broaching machine in ready-to-use condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in drawbridge: 85 mm Broaching tool clamping: universal pull head for flat shanks up to 25 mm width Through hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / Rated power: 380V 50Hz / 8.0 kW Accessories / Special features: • Machine features manual-hydraulic control for broaching stroke movement • Integrated coolant and cutting fluid system • Simple, external oil drip tray on the machine bed, without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. On request, broaching needles as well as broaching mandrels and pull heads can be supplied.

Rok výroby: 1999, stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in like-new condition with tool lifter system, ideal for use with flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting on drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by machine body/tool tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 9 m/min Return speed: hydraulically stepless adjustable from 1 m/min to 24 m/min Machine space requirements (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: Hedpjr A Hcbsfx Acyjr • Machine features an electric control system for broaching movement with manual and automatic operation • Integrated coolant/lubricant system • Tool lifter system for flat broaching tools (no automatic feed) • Broaching slide with pull-head mount includes dual-sided flat guides Accessories: • 1 universal pull-head for flat shafts from 3 mm to max. 25 mm width and up to 10 kN (10,000 kg) pulling force • Complete machine documentation and CE declaration of conformity Remarks: Ideal machine for machining keyways. The combination of the rigid machine bed and the broaching tool lifter system makes it particularly suitable for quick and easy use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is powered up for demonstration. Our direct contact details and further information about the machine can be found in the attached PDF document.

Rok výroby: 1993, stav: dobrý (použitý), číslo stroja/vozidla: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 Hjdpfjcc D Ddsx Acysr General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feeding for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1,000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mount diameter: 3 x Ø 80 mm Clearance between cylinders: max. 435 mm Cutting speed: hydraulically adjustable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically adjustable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5,500 x 2,800 x 4,900 mm Power supply / Connected load: 380 Volt 50 Hz / 38 kW Accessories / Special Features: The machine is equipped with a workpiece table and a pull bridge for 3 broaching stations. Furthermore, it features an automatic workpiece feeding system for 2 workpieces. Clamping of shank and end piece holders is hydraulic. The machine has a coolant system with an integrated magnetic chip conveyor for use without a special foundation (pit). Remarks: This machine is designed for large series production. It is in very good condition, still in its original paint. The machine is powered and available for inspection at our warehouse.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Rok výroby: 2009, číslo stroja/vozidla: M 09074, celková hmotnosť: 950 kg, výkon: 8 kW (10,88 k), vstupné napätie: 400 V, Technické údaje: Ručné nastavenie: 400 mm ručné nastavenie Automatický drážkovací cyklus: 250 mm, automatický drážkovací cyklus Šírka perových drážok: 2 až 32 mm Priemer obrobku: 620 mm Maximálna strihacia sila: 20 kN, pevná hodnota Rýchlosť strihu: 15 m/min, plynulo nastaviteľná Rozmery (Š x H x V): 1000 x 1200 x 2440 mm Čistá hmotnosť: cca 950 kg Elektrické pripojenie: 3 x 400 VAC, 50/60 Hz, 8 kW Pneumatické pripojenie: nie je potrebné Hodpfx Asyazc Socyer Farba: Modrá RAL 5001, Sivá RAL 7035 Podrobnosti pozri v priloženom PDF popise.

Stav: nový, Priemer puzdier: 32 – 50 mm Dĺžka: 350 mm Hedpfx Acoupxk Dsyjr Šírka drážky: 10 – 12 – 14 mm Hmotnosť: 20 kg Rozmery (d × š × v): 400 × 150 × 250 mm Šírky drážok: 10 – 12 – 14 mm Priemery vodiacich puzdier: 32 – 34 – 35 – 36 – 38 – 40 – 42 – 44 – 45 – 46 – 48 – 50 mm

Stav: nový, Priemer puzdier: 12 - 30 mm Hjdpfx Aju Imi Hecyor Šírka drážok: 4 - 5 - 6 - 8 mm Hmotnosť: 14 kg Rozmery (D x Š x V): 400 x 150 x 250 mm Šírky drážok: 4 - 5 - 6 - 8 mm Priemer vodiacich puzdier: 12 - 14 - 15 - 16 - 18 - 20 - 22 - 44 - 25 - 26 - 28 - 30 mm

Stav: dobrý (použitý), Frézovacia hlava Cardinal Model TM7 Hedpfx Aoq R T Hcecysr

Rok výroby: 1978, stav: dobrý (použitý), Model USA 50TX120 – Zvislo pracujúci ťahový broach stroj Vybavenie: - Zberač (retriever) - Ťahač (puller) - Hydraulický systém - Systém chladenia (coolant system) Hsdortrzlepfx Acyer - Priemyselný chladič (chiller) - Dopravník triesok (chip conveyor) - Manuály Technické údaje: - Štandardná broach kapacita: 45 360 kg (100 000 lbs) pri 63,6 bar (922 PSI) - Maximálna ťažná sila: 60 597 kg (133 600 lbs) pri 93,1 bar (1350 PSI) - Hlavný posuv, zdvih (bump): 2 692 mm (106") - Maximálna rýchlosť obrábania: 6,1 m/min (20 ft/min) - Maximálna spätná rýchlosť: 12,2 m/min (40 ft/min) - Výkon hlavného čerpadla: 55,9 kW (75 HP) pri 900 ot./min - Objem hydraulickej nádrže: 1 380 l - Výkon manipulačného čerpadla: 7,5 kW (10 HP) pri 1 200 ot./min - Výkon chladiaceho čerpadla: 1,1 kW (1,5 HP) pri 1 800 ot./min - Priepustnosť chladiaceho čerpadla: 378,5 l/min pri výšku 7 m - Objem chladiacej nádrže: cca 2 270 l - Potrebná podlahová plocha (Š x H x V): 1 650 x 2 438 x 6 172 mm - Hmotnosť: cca 35 800 kg Stroj je vybavený kompletnou hydraulikou, chladiacim systémom a všetkým príslušenstvom pripraveným na okamžité použitie.

Stav: dobrý (použitý), celková hmotnosť: 10 364 kg, Rok výroby: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTIKÁLNY ŤAHÁČ S VYSÚVACÍM STOLOM Vybavenie: Retriever Posuvný stôl Dopravník triesok Automatické podávanie Hjdertrzaepfx Acyor Mazací systém Grayco Ovládací panel AB PanelView Nádrž a čerpadlo chladiacej kvapaliny Technické parametre: Nosnosť: 10 ton Zdvih: 30" (palcov) Stôl sa pohybuje smerom nahor 1″ ťažné/držiace rameno Hydraulická pohonná jednotka Dopravník triesok Rozmery stroja (cca): 165" x 48" x 60" Celková hmotnosť stroja (cca): 10 340 kg Hmotnosť stĺpa stroja (cca): 5 900 kg Základňa s dopravníkom triesok (cca): 2 130 kg Elektrický rozvádzač (cca): 270 kg Hydraulická pohonná jednotka (cca): 2 040 kg