Fom Industrie Baiha L kúpiť použité (80 040)

Stav: nový, Bending length: 2600Sheet thickness: 4Top roll diameter: 140Sheet length: 2,600 Technical specifications: - Back roll motor-driven - Cone bending device - Hardened and polished rolls - Full body made from St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel - In compliance with CE standards Options: - Bottom roll driven by electric motor EURO 1,513.00 - Digital display for showing the position of the back roll EURO 1,010.00 - Extended rolls EURO 966.00 Ledjd Ab Nropfx Aklshi - Profile rolls EURO 1,190.00 We have many references!

Stav: nový, Bending length: 1600 mm Sheet thickness: 6 mm Top roller diameter: 140 mm Technical data: - Rear roller driven by motor - Cone bending device - Hardened and polished rollers - Entire body made of St 52 steel - Asymmetric design for optimal bending results - Top and bottom rollers driven by brake motors and planetary gearboxes in the transmission - Portable control panel - Complies with CE standards Options: - Bottom roller driven by electric motor EURO 1,512 - Digital display for rear roller position EURO 1,010 - Extended rollers EURO 966 - Profile rollers EURO 1,190 We have numerous references! Lhsdped Ab Ntefx Aklji

Stav: nový, Sheet length: 4,000 mm Sheet thickness: 20.0 mm Lhsdpfx Aksxxd D Ueloi Cutting width: 4,000 mm Total power requirement: 22 kW Weight approx.: 20,000 kg Dimensions (LxWxH): 4,850 x 2,300 x 2,180 mm Technical Specifications: Sheet thickness: 20 mm Cutting length: 4,000 mm Cutting angle: 2.30° Back gauge: motorized, 1,000 mm Motor power: 22 kW Length: 4,850 mm Width: 2,300 mm Height: 2,180 mm Weight: 20,000 kg Equipment: Swing beam design NC pre-selection control ELGO P 40 T Touch With back gauge and cutting gap adjustment from the front via the control unit Motorized back gauge up to 1,000 mm Clear control panel mounted on swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Foldable finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Easy replacement and regrinding of blades Adjustable cutting length for efficient processing Lower blade can be used on 4 edges Upper blade can be used on 2 edges Qualified customer service Operating manual in ENGLISH Machine and equipment conform to CE regulations

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 10 mm Cutting width: 3,200 mm Total power requirement: 15 kW Weight approx.: 7,700 kg Dimensions (LxWxH): 3,800 x 1,820 x 1,920 mm Lhodpfjvap Thex Aklji Technical Data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Back gauge: motorized, 1,000 mm Motor power: 15 kW Length: 3,800 mm Width: 1,820 mm Height: 1,920 mm Weight: 7,700 kg Equipment: Swing cut design NC pre-selection control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the controller motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swing arm hydraulic hold-downs positioned close to the cutting edge foot pedal cutting gap adjustment cutting line illumination wide support table with ball inserts foldable finger guard, 1,000 mm 1 side stop with T-slot 2 sheet support arms with T-slot simple blade changing and regrinding adjustable cutting length for efficient processing lower blade with 4 cutting edges upper blade with 2 cutting edges qualified customer service Operating manual ENGLISH Machine and equipment comply with CE regulations

Stav: nový, Sheet length: 3,200 mm Sheet thickness: 16 mm Cutting width: 3,200 mm Total power requirement: 22 kW Weight approx.: 10,600 kg Dimensions (LxWxH): 3,800 x 1,950 x 2,080 mm Technical data: Sheet thickness: 10 mm Cutting length: 3,200 mm Cutting angle: 1.30° Back gauge: motorised, 1,000 mm Motor power: 22 kW Length: 3,800 mm Width: 1,950 mm Height: 2,080 mm Weight: 10,600 kg Ledpfx Aovap Tnsklehi Equipment: Swing beam shear design NC preselection control ELGO P 40 T with back gauge and cutting gap adjustment from the front via the control unit Motorised back gauge up to 1,000 mm Clearly arranged control panel mounted on a swivel arm Hydraulic hold-downs positioned close to the cutting edge Foot switch Cutting gap adjustment Cutting line illumination Wide support table with ball transfers Folding finger guard, 1,000 mm 1 side gauge with T-slot 2 sheet support arms with T-slot Easy blade changing and regrinding Adjustable cutting length for cost-efficient machining Lower blade with 4 cutting edges Upper blade with 2 cutting edges Qualified customer service Operating manual in ENGLISH Machine and equipment compliant with CE regulations

Stav: nový, Dĺžka plechu: 1360 mm Hrúbka plechu: 6 mm Rozmery (D x Š x V): 2050 x 2250 x 1400 mm Motor: 7,5 kW Hmotnosť cca: 2300 kg Štandardné príslušenstvo: - NC riadenie - Programovateľný, motorizovaný zadný doraz s pojazdom 750 mm - Osvetlenie tieniacej línie - 1 kus dorazovej lišty s meradlom - 2 kusy podperných ramien na plechy Ljdogickkspfx Aklehi - 1 kus podperného ramena na plechy (pri modeloch 1106, 1306, 1505) - Ochrana prstov - Guľôčkový transportný pás - Jednoduché nastavenie medzery nožov spredu - Guľôčkový skrutkový mechanizmus - Počítadlo rezov - Prenosný nožný pedál s havarijným vypínačom - Svetelná závora na zadných bezpečnostných krytoch

Stav: nový, Working area: 2000 x 6000 Loading capacity: 1450 X-axis travel: 2020 mm Y-axis travel: 6050 mm Laser power: 4 kW Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Weight approx.: 11,500 kg Dimensions (LxWxH): 10,000 x 4,400 x 2,120 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine with premium-class standards. Capable of handling up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are commonly used in the manufacturing of agricultural machinery, textile machines, food processing equipment, construction machinery, elevators, and other large-scale machines and systems. It is an ideal cutting machine for anyone looking to outsource cutting operations. Features wireless remote control for easy blowing, cutting, pausing, calibration simulation, and more. Standard nesting software quickly and automatically prepares parts for cutting without operator intervention. It also includes a flycut function. Equipped with a dual exchange table, enabling continuous operation without downtime. All our machines are manufactured to European standards and come with a CE certificate. FLC-type machines feature nozzle cleaning and a dual camera system. Available with cutting areas of 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. The laser head offers auto-focus and active anti-collision functionality, as well as Auto-View for obstacle recognition and automatic movement. Cutting heads have automatic cooling. All our machine bridges are made from single-piece, welded aluminum alloy sheet construction. This design ensures stiffness and maintains shape under shocks, overlaps, or heavy loads. Compared to steel profile bridges, they are three times lighter, allowing for higher speeds and acceleration with lower motor power demand. Included accessories: - Water chiller - Control cabinet cooling Lhsdjruwccepfx Akloi - Automatic focus head - Nesting software - 19-inch touchscreen CNC control - Fly cutting - Nozzle and lens starter kit - Parts debris drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Stav: nový, Pressure: 40 Bending length: 1300 Distance between uprights: 1300 Installation height: 375 Stroke length (max.): 150 Dimensions (LxWxH): 1880 x 2435 x 2320 mm Weight approx.: 3400 Motor power: 2 x 3.8 Electric Ball Screw CNC Press Brake KKI Model: REVOLUTION B-Servo 1550 mm x 40 t Standard equipment: KK-Industries is the general representative for the DENER group of companies. We have assembled a high-quality model for Europe. The CNC servo-electric press brake from KK-Industries, manufactured by DENER: Technological advantages: Model REVOLUTION B-Servo 1550 mm 40 t High speeds with ball screw drive The CNC servo-electric press brake is characterized by its high precision, accuracy, and versatile range of applications. - 100% electric, 0% hydraulic oil - Up to 40% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Technical Specifications Bending Length (B) 1550 mm Bending Capacity (press force) 40 tons Lsdpfsd H Hh Hex Aklehi Maximum Stroke 150 mm Daylight Opening (installation height, Q) 375 mm Approaching Speed 150 mm/s Bending Speed 20 mm/s Return Speed 150 mm/s Power 2 x 3.8 kW Weight 3400 kg Overall Length (A) 1880 mm Width (C) 2435 mm Height (D) 2320 mm KK-Industries GmbH There’s something for everyone!

Stav: nový, Shaft diameter: 30 mm Upper roll diameter: 148 mm Lower roll diameter: 118 mm Working speed: 2–4 m/min Motor power: 0.7 – 0.85 kW Length: 600 mm Width: 800 mm Approx. weight: 220 kg Height: 1450 mm Technical Specifications: - Steel frame - Two lower rolls are driven - Direct drive system with gears - Upper roll runs idle (free turning) - Hardened rolls - Roller shafts are hardened and ground - Two-speed motor - Standard rolls - Adjustable guide rolls - Horizontal and vertical working position Lhedpjd Eqqzjfx Aklsi Options: - Digital display EUR 600,-- - Angular side guide rolls EUR 900,-- - Double speed STANDARD - Brake motor EUR 150,-- PK 30 file Type Size Min. Dia Notes 150x10 20x6 1800 300 Standard Rolls 280x15 30x6 700 400 Standard Rolls 330x30 10x10 900 200 Standard Rolls 4Ø 30 Ø 10 900 200 Optional Rolls 5Ø 60x1.5 Ø 25x1.5 1000 600 Optional Rolls 61 1/2”x2.9 1/4”x1.8 600 300 Optional Rolls 750x30x3 40x20x2 1200 800 Optional Rolls 840x3 30x2 1200 800 Optional Rolls 940x40x5 30x30x4 600 300 Optional Rolls 1035x35x5 30x30x4 600 400 Optional Rolls 1150x6 20x3 600 400 Standard Rolls 1250x6 20x3 600 400 Standard Rolls 1350x6 20x3 600 400 Standard Rolls * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities are given for 260 N/mm² plate yield strength

Stav: nový, Pressure: 65 Bending length: 2550 mm Distance between uprights: 2550 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 3680x1960x2500 mm Weight approx.: 5500 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-6525 Servo-driven Press Brake REVOLUTION Servo-electric press brakes contain no hydraulic system and are the technology of tomorrow thanks to their flexibility and reliability. The increased speed and precision of this new generation of machines provide higher efficiency, ergonomic features, and an eco-friendlier production technology. As the first manufacturer of servo-electric press brakes in various models and tonnages, Dener is a pioneer in this technology, backed by extensive experience and quality. Standard Equipment: KK-Industries is the exclusive representative of the DENER group. We have developed a high-quality model for Europe: The CNC Servo Electric Press Brake by KK-Industries, manufactured by DENER: Technological Advantages – Model: REVOLUTION DDM Lheded Etfxepfx Aklei The CNC Servo Electric Press Brake stands out for its high precision, accuracy, and versatile application capabilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full frame length usable - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic control Delem 66T 17" touchscreen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via the 3D controller - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m versions - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes We also make no compromises with the upper tool and die and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tooling from EUROSTAMP Italy: - Segmented gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge driven by servomotors on linear guides and ball screws Naturally, any machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. - Laser safety system on the upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional backgauge-controlled axes: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis backgauge, X1, X2 – R type backgauge - X-Prime type backgauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen controller DELEM DA-69T KK-Industries GmbH

Stav: nový, Pressure: 175 Bending length: 3570 mm Distance between side frames: 3570 mm Installation height: 590 mm Stroke length (max.): 300 mm Lsdsd Etf Dspfx Aklohi Dimensions (LxWxH): 5340x2100x2680 mm Weight approx.: 11,500 kg Motor power: 22 kW CNC crowning via control: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-17535 Servo-driven Press Brake REVOLUTION Servo-electric press brakes do not contain a hydraulic system and, due to their flexibility and reliability, represent tomorrow's technology. The higher speed and precision of this new generation of machines offer you improved efficiency, ergonomic features, and eco-friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology, backed by extensive experience and quality. Standard equipment: KK-Industries holds the exclusive representation for the DENER group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER offers: Technological advantages: Model REVOLUTION DDM - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speeds and significantly quieter operation - Full-length utilization between the frames - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending sequences directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard features: - 3D color graphical control Delem 66 T 17" touch screen - Y1, Y2, X, and R axes CNC-controlled - CNC crowning via the 3D control - X-axis 500 mm, R-axis stroke 150 mm on 1.5 m and 2 m machines - X-axis 750 mm, R-axis stroke 250 mm on all other press brakes - No compromises when it comes to top tools and dies: fitted with premium tooling from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 (V= 16, 22, 35, and 50 mm) - Back gauge with servo motors, linear guides, and ball screw - Laser safety device on the upper beam - CE-compliant safety equipment - Operating manual in GERMAN and ENGLISH Of course, every machine is only as good as its service. For this reason, we focus on highly qualified staff with extensive experience in CNC sheet metal processing. Options: - Additional controlled axes for the back gauge: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis back gauge, X1, X2, R type back gauge - X-Prime type back gauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Stav: nový, Working width: 1,500 mm Working length: 3,000 mm Accuracy +/-: 0.05 mm Maximum loading weight: 1,250 kg Dimensions (LxWxH): 8,100 x 2,200 x 2,560 mm Approx. weight: 7,900 kg Laser power: 2 kW Maximum material thickness (St 37-42): 14 mm Maximum material thickness (St 37-42, fine cut): 4 mm Maximum stainless steel thickness: approx. 5 mm The FLC series is a fast, precise, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine built to premium standards. With a capacity of up to 30,000 W of laser power, it is an excellent choice for cutting thick plate material. FLC fiber laser cutting machines are typically used for processing in the manufacture of agricultural machinery, textile machines, food machinery, construction machinery, lifts, and other large machines and equipment. It is an ideal cutting machine for anyone wishing to outsource their cutting operations. Wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more. The standard nesting software package quickly and autonomously prepares parts for cutting, requiring no operator intervention. Flycut feature included. The double shuttle table allows for continuous cutting without waiting times. All our machines are built according to European standards and are CE-certified. FLC-type machines come equipped with nozzle cleaning and a dual camera system. Available cutting bed sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus, an active anti-collision system, and an auto-view function that detects obstacles and repositions automatically. Cutting heads are equipped with automatic cooling. Ledpfstqy Tfjx Akljhi The gantries in all our machines are made from one-piece welded aluminium alloy sheet constructions. The monolithic design ensures rigidity and prevents deformation or loss of form due to impacts, overload, or stress. Thanks to a weight three times lower than that of steel gantries, we achieve higher speeds and acceleration with less motor power. Included accessories: - Water chiller - Control cabinet air conditioning - Automatic focus head - Nesting software - 19-inch CNC touchscreen control - Flycutting - Starter kit with nozzles and lenses - Parts waste drawers - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote control - Automatic lubrication system - Dual camera system Laser type: Fully enclosed CNC unit: CypCut Autofocus: Yes Working area: 1,500 x 3,000 mm Repeatable positioning accuracy: ±0.03 mm/m Positioning accuracy: ±0.05 mm/m Maximum speed: 120 m/min Maximum acceleration: 1.2 G Max. load capacity (per table): 1,250 kg Laser source: 2,000 W Source type: Han’s resonator Table change time: 15 s Laser cutting head: Raycus, autofocus Power supply: 380 V 50Hz (three phase) Graphics formats: dwg / dxf / stp Chiller: Included Average weight (machine dimensions): 2,200 x 8,100 x 2,560 mm

Stav: nový, Priemer hriadeľa: 480 mm Ledpfx Ajh Alh Rjklshi Pracovná rýchlosť: 3–6 m/min Výkon motora: 22 kW Dĺžka: 2500 mm Šírka: 2200 mm Výška: 2300 mm Hmotnosť cca: 9300 kg Technické údaje: - Zvarený rám z oceľovej konštrukcie - Poháňané 3 valce - Kalené a brúsené hriadele z vysokopevnostnej špeciálnej ocele - Valce sú kalené a brúsené - Horizontálna pracovná poloha - Kalené štandardné valce - Mobilný ovládací panel - Uhlové bočné vodiace valce - Brzdový motor pre presné ohýbanie - Digitálne displeje (2 kusy) Voliteľné príslušenstvo: - Štandardný digitálny displej - NC jednotka 10 Screen EUR 11 500,--

Stav: nový, Priemer hriadeľa: 50 mm Priemer valca: 155 mm Pracovná rýchlosť: 4,5 m/min Výkon motora: 1,5 kW Dĺžka: 750 mm Šírka: 1000 mm Výška: 1400 mm Hmotnosť cca: 400 kg Technické údaje: - Oceľový rám - Dva priamo poháňané valce - Valce sú kalené - Hriadele valcov sú vyrobené zo špeciálneho oceľového materiálu, kalené a brúsené - Hriadele valcov uložené v ložiskách - Štandardné valce - Vodiace valce - Horizontálna a vertikálna pracovná poloha Voliteľné vybavenie: - Digitálny displej EUR 700,-- - Uhlové bočné vodiace valce EUR 1100,-- - Dvojitá pracovná rýchlosť EUR 700,-- Tabuľka kapacít: Typ | Rozmery | Min. priemer | Poznámky --- | --- | --- | --- PK 35 | 160x10, 40x10 | 500, 400 | Štandardné valce | 100x15, 60x10 | 450, 350 | Štandardné valce | 35x35, 20x20 | 900, 300 | Štandardné valce | Ø 35, Ø 30 | 600, 400 | Voliteľné valce | Ø 70x2, Ø 30x2 | 1000, 500 | Voliteľné valce | 2”x2,9, 1”x2,3 | 1000, 350 | Voliteľné valce | 70x30x2, 50x40x3 | 1200, 1200 | Voliteľné valce | 50x3, 40x3 | 1700, 600 | Voliteľné valce | 50x50x5, 40x40x5 | 800, 600 | Voliteľné valce | 50x50x6, 30x30x3 | 1000, 500 | Voliteľné valce | 60x7, 30x4 | 700, 400 | Štandardné valce | 60x7, 30x4 | 800, 500 | Štandardné valce | 60x7, 30x4 | 700, 500 | Štandardné valce Ljdpfx Akod Eqqwslehi | UPN 80, UPN 30 | 1000, 500 | Voliteľné valce* | UPN 80, UPN 30 | 1200, 800 | Štandardné valce* * Môže byť potrebná špeciálna podložka (distancer) / iba so špeciálnym príslušenstvom na ohýbanie profilov • Kapacity sú uvedené pre pevnosť materiálu 260 N/mm²

Stav: nový, Pressure: 50 Bending length: 2040 Distance between uprights: 2040 Installation height: 590 Stroke length (max.): 300 Dimensions (LxWxH): 3170x1960x2500 Approx. weight: 4850 Motor power: 11 CNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-5020 Servo-driven press brake REVOLUTION Servo-electric press brakes contain no hydraulic systems and, thanks to their flexibility and reliability, represent the technology of the future. The increased speed and precision of this new generation of machinery offers you greater efficiency, ergonomic features, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and capacities, Dener is a pioneer in this technology, backed by extensive experience and quality. Standard equipment: KK-Industries is the general representative for the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER offers the following technological advantages: Model: REVOLUTION DDM The CNC Servo Electric Press Brake is distinguished by its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter - Full length between frames can be utilized - Reduced maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: - 3D color graphic controller Delem 66 T, 17” touchscreen - CNC control of Y1, Y2, X, and R axes - CNC crowning via 3D controller - X-axis: 500 mm, R-axis: stroke 150 mm for 1.5 m and 2 m models - X-axis: 750 mm, R-axis: stroke 250 mm for all other press brakes Lhsdsd Etfyspfx Aklji - For the upper tool and die, we make no compromises and equip the KKI REVOLUTION CNC Servo Electric Press Brake with high-quality tooling from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) - Backgauge with servo motors on linear guides and recirculating ball screw - Of course, every machine is only as good as its service. For this reason, we focus on highly qualified personnel with extensive experience in the CNC sheet metal processing sector. - Laser safety device on upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled axes for the backgauge: X1, X2, R, Z1, Z2, Delta X - ATF Type 6-axis backgauge, X1, X2 – R Type backgauge - X-Prime Type backgauge - Hydraulic upper and lower tool clamping for tooling - CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning € 2,329.00 - CNC crowning € 4,658.00 KK-Industries GmbH

Stav: nový, Pressure: 40 Bending length: 1530 mm Frame gap: 1530 mm Installation height: 590 mm Stroke length (max.): 300 mm Dimensions (LxWxH): 2660 x 1960 x 2500 mm Weight approx.: 4600 kg Motor power: 11 kW CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-4015 Servo-motorized press brake REVOLUTION Lhsdpfsd Etfzox Akloi Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent the technology of the future. Higher speed and accuracy in this new generation of machines provide you with greater efficiency, ergonomic benefits, and environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer in this technology, offering exceptional experience and quality. Standard Equipment: KK-Industries is the exclusive distributor for the DENER Group. We have assembled a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological Advantages: Model REVOLUTION DDM The CNC Servo Electric Press Brake stands out for its high precision, accuracy, and versatile application options. - 100% electric, 0% hydraulic oil - Up to 50% lower energy consumption compared to conventional hydraulic press brakes - High efficiency and accuracy - High bending speed and significantly quieter operation - Usable full frame length - Reduced maintenance costs - Environmentally friendly - Operator-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment: 3D color graphic control DELEM 66T 17" touchscreen Y1, Y2, X, and R axes CNC-controlled by the control system X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models X-axis 750 mm, R-axis stroke 250 mm for all other press brakes We also make no compromises regarding top tools and dies, equipping the CNC Servo Electric Press Brake KKI REVOLUTION with premium tools from EUROSTAMP Italy. Segmented gooseneck top tool 4-V die block 60x60 (V = 16, 22, 35, and 50 mm) Backgauge operated by servomotors on linear guides and ball screws Of course, every machine is only as good as its service. That's why we focus on highly qualified staff with long-term experience in CNC sheet metal processing. Laser safety device on the upper beam CE safety equipment Operating manual in GERMAN and ENGLISH Options: Additional controlled axes of the backgauge X1, X2, R, Z1, Z2, Delta X ATF Type 6-axis backgauge, X1, X2-R-type backgauge X-Prime type backgauge, hydraulic upper and lower tool clamping for tools CNC 3D touchscreen controller DELEM DA-69T We recommend the following options: - Manual crowning € 2,330.00 - CNC crowning € 4,658.00 KK-Industries GmbH There's something for everyone!

Stav: nový, Pressure: 200Bending length: 4080 mmFrame gap: 4080 mmInstallation height: 590 mmStroke length (max.): 300 mmDimensions (LxWxH): 5740x2130x2680 mmWeight approx.: 13,000 kgMotor power: 22 kWCNC crowning via controller: yes CNC Servo Electric Press Brake KKI Model: REVOLUTION DDM-20040Servo-motorized press brake REVOLUTION Servo-electric press brakes contain no hydraulic system and, thanks to their flexibility and reliability, represent tomorrow's technology. The higher speed and accuracy of this new generation of machines provides better efficiency, ergonomic features, and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with various models and tonnages, Dener is a pioneer of this technology—with extensive experience and quality. Standard Equipment: KK-Industries is the general distributor of the DENER Group. We have assembled a high-quality model for the European market. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological Advantages: Mod. REVOLUTION DDM The CNC servo electric press brake is characterized by its high precision, accuracy, and versatile application possibilities. - 100% electric, 0% hydraulic oil - Up to 50% less energy consumption compared to conventional hydraulic press brakes Ljdpsd Etf Asfx Aklshi - High efficiency and accuracy - High bending speed and significantly quieter - Utilizable full working length between frames - Lower maintenance costs - Environmentally friendly - User-friendly control panel - Automatic calculation of bending steps directly from STEP or DXF files - Up to 35% faster than hydraulic press brakes Standard Equipment Includes: - 3D color graphic control DELEM 66T 17" touchscreen - Y1, Y2, X, and R axis CNC-controlled - CNC crowning via 3D control - X-axis 500 mm, R-axis stroke 150 mm for 1.5 m and 2 m models - X-axis 750 mm, R-axis stroke 250 mm for all other press brakes - We make no compromises regarding the upper tool and die, equipping the CNC servo electric press brake KKI REVOLUTION with high-quality tools from EUROSTAMP Italy - Segmented gooseneck upper tool - 4-V die block 60x60 (V= 16, 22, 35, and 50 mm) - Back gauge driven by servo motors on linear guides with recirculating ball screw - Naturally, every machine is only as good as its service. For this reason, we focus on highly qualified staff with long-standing experience in CNC sheet metal working. - Laser safety device on the upper beam - CE safety equipment - Operating manual in GERMAN and ENGLISH Options: - Additional controlled axes for the back gauge: X1, X2, R, Z1, Z2, Delta X - ATF type 6-axis back gauge; X1, X2-R type back gauge - X-Prime type back gauge - Hydraulic upper and lower tool clamping for tools - CNC 3D touchscreen control DELEM DA-69T KK-Industries GmbH

Stav: nový, Dĺžka plechu: 1360 Ljdpfx Akjgick Delehi Hrúbka plechu: 3 Štandardné príslušenstvo: - NC riadenie - Programovateľný motorizovaný zadný doraz s pojazdom 750 mm - Osvetlenie tieňovou čiarou - 1 ks dorazové rameno s meracou stupnicou - 2 ks podperné ramená na plechy - 1 ks dodatočné podperné rameno na plechy (pri modeloch 1106-1306-1505) - Ochrana prstov - Guľôčkový stôl (Ball Transfer Table) - Jednoduché nastavenie strihacej medzery z prednej strany - Guľôčkový skrutkový pohon - Počítadlo strihov - Prenosný nožný spínač s núdzovým vypínačom - Svetelná závora na zadných ochranných zariadeniach

Stav: nový, Dĺžka plechu: 2560 Hrúbka plechu: 2,5 Štandardné príslušenstvo: NC-riadenie Programovateľný motorizovaný zadný doraz s pojazdom 750 mm Osvetlenie línie tieňa 1 ks dorazový rameno s mierkou 2 ks plechové podporné ramená 1 ks ďalšie podporné rameno (pre modely 1106-1306-1505) Ochrana prstov Guľôčkový stôl (Ball Transfer Table) Jednoduché nastavovanie strihacej medzery spredu Guľôčkový skrutka Lsdpfxjgiclae Aklehi Počítadlo strihov Prenosný nožný spínač s núdzovým vypínačom Svetelná závora na zadných ochranných zariadeniach

Stav: nový, Sheet length: 4065 mm Sheet thickness: 10.0 mm Total power requirement: 22 kW Weight approx.: 14,900 kg Dimensions (LxWxH): 4860x3170x2430 mm Our powerful brand KKI CNC GUILLOTINE Shears, swing beam design Model AS 4010 has everything you need for perfect cutting. CNC swing beam guillotine shear KKI Thanks to a robust and durable mechanical and hydraulic system, a precise CNC-controlled backgauge with ball screw drive, and user-friendly CNC control, our shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 m are part of our standard portfolio. Of course, higher sheet thicknesses and cutting lengths are possible on request. The long service life of our shears is due to their particularly robust construction with a fully welded frame. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, thus ensuring the highest cutting quality. By simply entering the sheet thickness and material type, the CNC control system automatically calculates the required cutting angle and blade gap. Our strong brand KKI CNC GUILLOTINE Shears, swing beam design Model AS 4010 has everything you need for perfect cutting. Technological Advantages: - Fast and precise cuts - Sturdy and durable frame construction - Automatic blade gap adjustment - Easy-to-use operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs With our patented blade support system, the upper blade can be finely adjusted and stabilized, ensuring precise and high-quality cuts. A so-called 'banana cut' is prevented. Technical Data: Sheet thickness: 10 mm Cutting length: 4,065 mm Cutting angle: 0.5 - 3° Number of hold-downs: 23 Backgauge: 1,000 mm via CNC Motor power: 11 kW Cutting speed (0.5 - 3°): 23-9 (cuts/min) Depth of throat: 350 mm Oil tank: 200 litres Length: 4,830 mm Width: 2,300 / 2,955 mm Height: 2,130 mm Weight: 11,150 kg Features: • Swing beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw drives for the backgauge • Table with ball transfers • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Tiltable finger guard up to 1,000 mm Optional pneumatic sheet support, EURO 8,420,-- We have many references! Lhedpohp Dkbjfx Aklji

Stav: nový, Shaft diameter: 50 mm Upper roll diameter: 152 mm Lower roll diameter: 162 mm High-performance hydraulics: 8 Working speed: 4.5 m/min Motor power: 1.1 kW Length: 810 mm Width: 950 mm Height: 1500 mm Weight approx.: 500 kg Technical Specifications: - Welded steel frame - All 3 rolls are driven - Hardened shafts made of special steel - Top roll hydraulically adjustable - Horizontal and vertical working positions - Standard rolls - Guide rolls - Brake motor for precision bending - Portable control panel Options: - Digital display EUR 700 - NC unit EUR 7,000 - Angle side guide rolls EUR 1,400 Lhsdpjd Ab H Sjfx Akloi HPK 50 File Type Size Min. Dia Notes 1. 60x10 20x10 600 300 Standard Rolls 2. 100x15 50x10 600 300 Standard Rolls 3. 35x35 15x15 600 300 Standard Rolls 4. Ø 35 Ø 20 600 300 Optional Rolls 5. Ø 70x2 Ø 25x1.5 1200 400 Optional Rolls 6. 2”x2.9 1/2”x2.3 1000 300 Optional Rolls 7. 70x30x3 30x15x2 1500 400 Optional Rolls 8. 50x3 20x2 1600 400 Optional Rolls 9. 50x50x6 30x30x3 600 400 Optional Rolls 10. 50x50x6 30x30x3 900 600 Optional Rolls 11. 60x7 30x4 600 400 Standard Rolls 12. 60x7 30x4 700 400 Standard Rolls 13. 60x7 30x4 700 400 Standard Rolls 14. UPN 80 UPN 30 800 400 Optional Rolls* 15. UPN 80 UPN 30 1200 600 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • The capacities are based on 260 N/mm² plate yield strength

Stav: nový, Bending length: 2100 mm Sheet thickness: 8 mm Top roll diameter: 200 mm Technical data: - Rear roll powered - Cone bending device - Hardened and polished rolls Ledpfx Aod Ab Nhoklohi - Entire frame made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearboxes - Mobile control panel - In compliance with CE standards Options: - Bottom roll powered by electric motor EURO 2,200.– - Digital display for rear roll position EURO 1,010.– - Extended rolls EURO 966.– - Profile rolls EURO 1,190.– We have many references!

Stav: nový, Bending length: 2600 mm Sheet thickness: 5 mm Top roll diameter: 170 mm Technical Specifications: - Rear roll driven by motor - Conical bending device - Hardened and polished rolls - Entire body made of St 52 steel - Asymmetric design for perfect bending - Top and bottom rolls driven by brake electric motors and planetary gearbox - Portable control panel - Compliant with CE standards Options: - Bottom roll driven by electric motor EURO 1,650 - Digital readout for rear roll position EURO 1,010 - Extended rolls EURO 966 Lsdpfx Akjd Ab Nnslehi - Profile rolls EURO 1,190 We have many references!

Stav: nový, Bending length: 2050 mm Sheet thickness: 4 mm Ledjd Ab Nwjpfx Akljhi Top roll diameter: 130 mm Technical data: - Rear roll motor-driven - Cone bending device - Hardened and polished rolls - Entire body made of St 52 steel - Main motor with brake system - Top and bottom rolls driven by electric motor, gearbox, and gear system - Portable control panel - Cast iron body - Rear and lower rolls adjustable manually - In compliance with CE standards Options: - Top roll driven by electric motor: EUR 1,260 - Digital display for rear roll position: EUR 1,010 - Hardened rolls: EUR 1,352 - Special voltage: EUR 480 - Material feeding table - Bottom roll driven by electric motor We have numerous references!

Stav: nový, Bending length: 1550 Sheet thickness: 4.5 Top roller diameter: 130 Technical Data: - Rear roller powered by electric motor - Conical bending device - Hardened and polished rollers - Entire frame made of St 52 steel - Main motor equipped with brake - Top and bottom rollers driven by electric motor, gearbox, and transmission system - Portable control panel - Cast iron frame - Manual adjustment for rear and lower rollers - Complies with CE standards Options: - Top roller driven by electric motor EURO 1,166.00 - Digital display for rear roller position EURO 1,010.00 - Hardened rollers EURO 1,117.00 - Special voltage EURO 480.00 - Material feed table Ledpfjd Ab Nxjx Aklehi - Bottom roller driven by electric motor We have numerous references!