Brúska Na Profily kúpiť použité (91 178)

Stav: veľmi dobrý (použitý), Rok výroby: 2019, Funkcionalita: plne funkčný, Working height 900 mm Working width 1,350 mm Abrasive belt change side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350-1,380 mm Adjustable abrasive belt blow-off device, 5-step adjustable WRD WORKPIECE CLEANING ROTOR Workpiece cleaning unit with 16 rotating nozzles MOBILE OPERATOR TERMINAL powerControl with powerTouch SST SOFT STARTER Start-up currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM After activating the program, the machines automatically move to a 10 mm workpiece thickness and the blow-off rotors are activated. After the feed belt has been completely cleaned, the machines move back to the initial setting. AAT EXTRACTION SLIDE GATE CONTROL Control of extraction slide gates via terminal (24 Volt DC, without extraction slide gates) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PC Uninterruptible power supply for abrasive belt oscillation after power failure Plant consists of: SANDTEQ W-700, PROFI SWB735/RRE – bottom sanding Wide belt sanding machine with three sanding units for processing wood or wood-based workpiece surfaces The machine is prepared for the installation of up to two auxiliary units, such as cleaning brushes, satin finishing or structuring brushes, and rotating cleaning nozzles. Units: I. R-UNIT Sanding unit with automatically adjustable contact roller, profiled steel roller, diameter 240 mm, with grit compensation, drive motor 37 kW, belt speed 25 m/s - Automatic locking of the sanding unit for quick belt changes and increased process safety - Sanding belt drives with electronic, wear-free brake - Optical, non-contact sanding belt control - Pneumatic sanding belt tensioning with integrated belt edge compensation II. R-UNIT Sanding unit with automatically adjustable contact roller, rubber-coated roller, diameter 240 mm, rubber hardness 85° Shore, with grit compensation, drive motor 30 kW, belt speed 18 m/s III. E-UNIT Sanding unit for accommodating a pressure beam - Automatic locking of the sanding units for quick belt changes and increased process safety - Sanding belt drives with electronic, wear-free brake - Optical, non-contact sanding belt control - Pneumatic sanding belt tensioning with integrated belt edge compensation - Protected storage at the machine for additional sanding inserts Drive motor 22 kW Belt speed 2 - 18 m/s Torque dependent standby mode to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the front and rear edge of the workpiece - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (LxWxH): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – top sanding Wide belt sanding machine with three sanding units for processing wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISH BRUSH Brush unit with finish brush Brush bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Kljdpjyw Ndmofx Ac Njr Machine dimensions (LxWxH): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Stav: nový, Technické údaje: Vzdialenosť medzi osou brúsneho kotúča a osou stĺpa: 300 mm Max. vzdialenosť medzi stolom a brúsnym kotúčom: 280 mm Kjdpovnriusfx Ac Njlr Maximálna brúsna plocha: 140 x 300 mm Rýchloposuv pri každej otáčke: 2 Jemné nastavenie pomocou mikrometra: 0,01 mm Rozmery kotúčového brúsneho kolesa: 178 x 78 x 78 mm Rozmery segmentov: 50 x 16 x 90 mm Otáčky brúsneho kotúča: 2840 ot./min. Výkon vretenového motora: 2,2 kW Výkon elektrického čerpadla: 0,06 kW Hmotnosť: 400 kg Rozmery: 850 x 850 x 1650 mm Vybavenie: - Stĺp z liatiny na nastaviteľných guľôčkových ložiskách - Zariadenie na mokré brúsenie - Bezpečnostné nízkonapäťové zariadenie (24V) - Držiak brúsnych kotúčov a brúsne segmenty (prvá sada) - Kryt brúsneho kotúča a kryt stola - Návod na obsluhu a údržbu - Vyhlásenie o zhode CE

Stav: dobrý (použitý), Rok výroby: 1985, Maximálna šírka nástroja: cca 230 mm Priemer upínacieho tŕňa / vretena: 40 / 50 mm Kodpjy D H Hrefx Ac Nelr Rýchlosť brúsenia: variabilná Mokré / suché brúsenie Ručný brúska hobľovacích nožov Weinig Rondamat 931 na ostrenie a brúsenie profilových nožov a rovných hobľovacích nožov v hobľovacej hlave pomocou šablón. Požiadajte o ukážku cez WHATSAPP.

Stav: dobrý (použitý), Kód: 0345 Značka: STROMAB Model: KGS 650 - CE štandard Automatický brúsiaci stroj na hobľovacie nože, čepele a rovné nástroje – CE štandard Technické údaje: Maximálna pracovná dĺžka: 650 mm Brúsiaci motor: 0,75 HP Vonkajší priemer brúsneho kotúča: 127 mm Posuv brúsneho kotúča na zdvih: 0,01/0,05 mm Výkon motora posuvu vozíka: 0,15 HP Rýchlosť posuvu vozíka: 12,5 m/min Naklápateľná motorová jednotka brúsneho kotúča Podstavec s policami na náradie Celkové rozmery (mm): 1200 x 500 x 1300 (v) Hmotnosť: 103 kg Kledpsyxf Ttofx Ac Ner

Stav: dobrý (použitý), Rok výroby: 2013, Priemer brúsenia: 390 mm Dĺžka brúsenia: 650 mm Výška hrotu: 200 mm Kjdpfx Asw Inr Nec Nslr Celkový príkon: 46 kW Hmotnosť stroja cca 6 t Potrebná plocha cca 3x3x2,4 m Univerzálna vonkajšia brúsky - typ WUG21 (W27) s dĺžkou brúsenia 650 mm EMAG Weiss je synonymom pre špičkovú technológiu pri univerzálnom brúsení medzi hrotmi. CNC riadené stroje WUG 21 od EMAG Weiss ponúkajú vhodné riešenie takmer pre každého užívateľa. --> Technické údaje Max. dĺžka brúsenia: 650 mm --> Výška hrotu: 200 mm --> Brúsený Ø zvonka: 1-390 mm --> Max. hmotnosť obrobku v letmom upnutí MK4: 100 kg --> Max. hmotnosť obrobku medzi hrotmi: 250 kg --> Posuvy: --> Pojezd osi X: 480 mm --> Pojezd osi Z: 1.150 mm --> Vreteník obrobku --> Koník --> Brúsny vreteník --> Chladiace zariadenie, výrobca HYFRA --> Pásový filter, výrobca Knoll, typ KF 200/1600 – rok výroby 2012 --> Filter olejovej hmly, výrobca Cobaron

Stav: dobrý (použitý), Rok výroby: 1972, Priemer kolesa - max. 80 mm Šírka kolesa 60 mm Kedpfxow N S D Sj Ac Nolr Modul - max. 3 Modul - min. 0,1 Celkový príkon 0,4 kW Hmotnosť stroja cca 120 kg Požadovaný priestor cca 0,6x0,6x0,75 m Stroj je určený na brúsenie malých kužeľových kolies s rovným ozubením. Na frézovanie kužeľových kolies sa používa Mikron 102.01.

Stav: použitý, Rok výroby: 2003, Ovládanie BWO Max. priemer hlavového kruhu 700 mm Min. priemer spodného kruhu 50 mm Ksdjxt Ur Sopfx Ac Nolr Max. výška profilu 35 mm Počet otáčok vretena 0 - 5400 min-1 Maximálne zaťaženie stola 500 kg Rozmery stroja 370x220x300 cm Celková hmotnosť cca 15 000 kg Prevádzkové hodiny 94 082 h Vybavenie: Ovládanie BWO Všetky osi riadené CNC Odsávanie olejovej hmly Zariadenie na čistenie chladiacej kvapaliny s chladiacou jednotkou Vyvažovacia jednotka Dittel Príslušenstvo: Brúsne kotúče Ø400mm vrátane Prírubové držiaky brúsnych kotúčov 1 diamantový orovnávací valec Dr. Kaiser Ø160mm Protipomocný hrot Rozvádzač: Šírka 70cm x Dĺžka 280cm x Výška 220cm Stroj: Šírka 220cm x Dĺžka 370cm x Výška 300cm Chladiace zariadenie: Šírka 170cm x Dĺžka 240cm x Výška 250cm

Rok výroby: 2024, stav: nový, Vozík na prepravu a skladovanie profilov vo vertikálnej polohe COMALL CARR 300 Q, nový Technické údaje: Kljdpfx Asf Nk H Hjc Nsr - 10 priehradiek s pracovnou šírkou 128 mm - Kontaktné plochy potiahnuté proti poškriabaniu a nárazuvzdorným plastom - 4 kolieska Ø 125 mm, z toho 2 s brzdou - Ramená nastaviteľné v 5 rôznych polohách - Podporný stôl s gumovým poťahom - Nosnosť: 650 kg

Stav: dobrý (použitý), Rok výroby: 2015, prevádzkové hodiny: 250 h, Funkcionalita: plne funkčný, Na prodaj: Vodilna brusilka (prerejena iz kovinske stružnice) Ponujamo robustno vodilno brusilko, ki je bila prvotno kovinska stružnica, kasneje pa strokovno predelano v vodilno brusilko. Glavna prednost je razmeroma kompaktna zasnova glede na zmogljivost obdelovanca. Kledpfjxx Uudjx Ac Nor Tehnične specifikacije: • Zunanje mere (D x Š x V): 4.800 x 2.500 x 2.000 mm • Zahtevan delovni prostor: 4.800 x 3.500 x 2.700 mm (+ električna omara, rezervoar za hladilno tekočino, dostop) • Dimenzija mize: 2.000 x 800 mm • Razdalja med stebri: 1.000 mm • Pomiki (X/Y/Z): 2.000 / 1.000 / 600 mm Posodobitve in oprema: • Nove kroglične vretena in ležaji • 2 nova motorja + 2 obnovljena motorja • 3 novi frekvenčni pretvorniki • Nov Siemens SINUMERIK 802C baseline krmilni sistem • Velika brusilna vretena: 2.840 vrt/min – obnovljena + nov motor • Majhna brusilna vretena: 18.000 vrt/min – obnovljena • Vključuje električno omaro, rezervoar s črpalko za hladilno tekočino in stenski frekvenčni pretvornik za majhno vreteno Stroj je na voljo za ogled in preizkus po dogovoru. Za dodatne informacije nas kontaktirajte.

Stav: použitý, Funkcionalita: plne funkčný, Brúska na náradie Výrobca: DECKEL, Typ S 1 Klodpfx Aeyw N Tusc Ner Technické údaje Výrobca: DECKEL Typ: S 1 Otáčky: od 3750 do 7500 ot./min Pripojenie: 380 V Hmotnosť stroja: cca 400 kg Rozmery (D x Š x V): 1,2 x 0,70 x 1,40 m Všetky údaje bez záruky. Predvedenie pod prúdom je možné kedykoľvek v našej výstavnej hale.

Stav: generálne opravený (použitý), Rok výroby: 2007, Kompletne novo repasovaný brúsiaci stroj Haas Multigrind HT dostupný od Q2 / 2026 Na prebrusovanie odvaľovacích fréz / čelustkových fréz / rezacích rotorov / výsekových fréz / priemyselných nožov / kruhových nožov / protibežných kolies / skivingových nástrojov / hlbinných vrtákov a iných obrobkov / komponentov Ovládanie: Siemens 840 D X - os: 650 mm Y - os: 400 mm Z - os: 280 mm A - os (delička): 360° SK50 C - os (otočný stôl): 270° X3 - os elektricky s lunetou Brúsna vreteno: HSK80 Jednotka na orovnávanie Menic nástrojov: 10-pozíciový zásobník Chladiace zariadenie: Turbo Separator Odsávanie: LTA CO2 - hasiaci systém Ďalšie príslušenstvo dostupné priamo z výroby Klodpfxjx Tr H Ns Ac Nor Softvér na mieru podľa požiadaviek zákazníka Predbežná kontrola vo fabrike a sprevádzkovanie, školenie a záverečné odovzdanie u zákazníka Možnosť financovania / leasingu Zmeny podľa požiadaviek možné

Stav: dielensky repasované (použité), Rok výroby: 1970, Funkcionalita: plne funkčný, Rozmery stola 800 x 200 mm Magnetický stôl 600 x 200 mm Brúsna plocha 630 x 200 mm Maximálna brúsna výška 320 mm Maximálny priemer brúsneho kotúča: 250 mm Otáčky 2750 ot/min Príkon 3,6 kW Hmotnosť 2200 kg Rozmery D x Š x V = 1900 x 1500 x 2000 mm Klodpfx Acow R Dnxs Njr Rozmery nádrže na chladiacu kvapalinu D x Š x V = 400 x 300 x 500 mm

Stav: dielensky repasované (použité), Rok výroby: 1985, Funkcionalita: plne funkčný, Kompletne repasované pôvodnými výrobcami Maximálny priemer brúsenia: 250 mm Brúsiteľná dĺžka: 750 mm Príslušenstvo - Bočná hydraulická jednotka a rozvádzač - Koník - Pracovné vreteno - Zariadenie na mokré brúsenie - Vnútorná brúsna jednotka - Vyvažovací tŕň - Ďalšie príslušenstvo na požiadanie Ksdpfx Acsychhtj Nslr Stroj je zapojený pod prúdom v Maďarsku. Obhliadka možná po dohode. Záruka na repas je 6 mesiacov v rámci Maďarska.

Stav: použitý, Rok výroby: 1974, Plošná brúska Elb SW9 VAI – Rok výroby 1974 – Použitá Na predaj je použitá plošná brúska od renomovaného výrobcu Elb, model SW9 VAI, rok výroby 1974. Stroj presvedčí svojou robustnou konštrukciou a je ideálny na presné brúsenie kovových a iných pracovných povrchov. Klsdpfx Aov Ti Hujc Njr Technické údaje: Výrobca: Elb Model: SW9 VAI Rok výroby: 1974 Oblasť použitia: Presné brúsenie pre opracovanie kovov Špeciálne vlastnosti: Pevná konštrukcia – odolná a spoľahlivá Presné výsledky brúsenia – vhodné na priemyselné použitie

Stav: nový, Condition: New Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €195,350 Leasing rate: €3,692.12 Grinding length: 2,000 mm Distance spindle - table: 730 mm Table size: 2,000 x 600 mm Magnetic chuck: 2x 1,000 x 600 mm Hydraulic table travel: 2,100 mm Table speed: 5 - 30 m/min Cross feed: 0 - 2,250 mm/min Cross feed, incremental: mm Max. cross travel: 685 mm Vertical feed: 0 - 675 mm/min Vertical feed, incremental: 0.001 - 0.04 mm Max. vertical travel: 560 mm Spindle speed: 500 - 2,200 rpm Spindle motor: 11 kW Hydraulic motor: 5.5 kW Length: 6,225 mm Width: 07 mm Height: 2,305 mm Transport dimensions: 6,530 × 00 × 3,350 mm (gross) Weight: 10,200 kg Max. table load: 1,600 kg Max. workpiece weight on magnetic chuck: 1,150 kg Max. workpiece weight on clamping table: 1,600 kg Grinding wheel dimensions: Ø 405 x 75 x 127 mm Servo feed motors Y/Z: 3.1 kW each 10.4" iSurface Graphic NC control on a swiveling arm with touchscreen for: - Selection of operating mode - Cycle selection and program creation - Surface grinding - Cross grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing on the machine - Automatic spindle speed for constant surface speed - Visualization of spindle load - Unbalance control - Graphic condition monitoring - Alarm list Max. table speed: 30 m/min Integrated machine body temperature control Turcite-coated double-V guideways Hydraulic table drive with cooling Linear guides with ball screws and AC motors for precise positioning on X and Z axes Automatic lubrication with a pressure switch for automatic stop in case of pressure drop Electro-magnetic chuck 2x 1,000 x 600 mm Coolant system with automatic paper filter and magnetic separator (500 l) Ksdpsxpizmjfx Ac Njlr Automatic dressing device mounted on table (without diamond), with automatic compensation Grinding wheel flange with 1 grinding wheel Grinding wheel balancing device LED machine light Machine and equipment according to CE regulations Operating instructions in GERMAN or ENGLISH OPTIONS (PRICES ON REQUEST): - Fully enclosed working area - Oil mist extraction

Stav: nový, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €156,560 Leasing rate: €2,958.98 Grinding length: 1200 mm Distance spindle to table: 850 mm Table size: 1200 x 500 mm Grinding area: 1200 mm Magnetic chuck: 1200 x 500 mm Table speed: 5 - 30 m/min Cross feed: 0 - 5000 mm/min Cross feed incremental: 0.001 mm Max. cross feed: 560 mm Vertical feed: 0 - 2000 mm/min Vertical feed incremental: 0.001 mm Spindle speed: 500 - 2200 rpm Spindle motor: 11 kW Hydraulic motor: 3.7 kW Cross feed motor: 3.1 kW Grinding wheel feed drive: 2.4 kW Length: 4600 mm Width: 2950 mm Height: 2745 mm Transport dimensions: 4610 x 2290 x 2500 mm Weight: 6400 kg Table height: 900 mm Max. workpiece weight on magnetic chuck: 930 kg Max. workpiece weight on clamping table: 1250 kg Grinding wheel dimensions: 405 x 50 x 127 mm Smart i control with 10.4" touchscreen on swiveling panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-code) - PC-based control with graphical dialog programming or G-code programming Ksdpfxswiryze Ac Nelr Infinitely variable spindle speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple slot grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, Class 7) Spindle with air overpressure system against dust ingress Longitudinal slideways with double V-design and Turcite-B coating Cross and vertical feed with precision ball screws (class C2) and servo motors Longitudinal feed hydraulic Linear scale for Y-axis 675 mm X-axis slideways equipped with recirculating lubrication pump for sufficient oil supply and efficient lubrication Full enclosure with lighting Electro-magnetic chuck 1200 x 500 mm Coolant device with automatic paper filter and magnetic separator Automatic dressing device mounted on table with automatic compensation* Grinding wheel Grinding wheel flange Grinding wheel balancing device Cabinet cooler Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH PRICE FOB TAIWAN *The exact configuration of the dressing device must be clarified before order placement.

Stav: nový, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €48,720 Leasing rate: €930.55 Grinding length: 610 mm Distance spindle – table: 600 mm Table: 610 x 305 mm Magnetic chuck: 300 x 600 mm Table travel hydraulically: 650 mm Table travel manually: 700 mm Table speed: 5 – 25 m/min Cross feed: 1,100 mm/min Cross feed incremental: 1 – 12 mm Max. cross feed: 370 mm Hydraulic motor: 1.5 kW Cross feed motor: 0.004 kW Feed drive grinding wheel: 0.19 kW Total connected load: 7.4 kW Length: 2,670 mm Width: 1,810 mm Height: 2,050 mm Weight: 2,100 kg Grinding wheel dimensions: 355 x 50 x 127 mm Spindle speed: 1,450 rpm Spindle drive: 3.7 kW Cross feed per handwheel revolution: 4 mm Cross feed per handwheel division: 0.02 mm Fine feed per revolution: 0.2 mm Kledpfxowirh Se Ac Ner Fine feed per division: 0.002 mm Control panel on swing arm automatic vertical feed hardened guideways on all 3 axes with needle bearings grinding wheel spindle mounted on 4 high-precision angular contact ball bearings electro-magnetic chuck coolant system with automatic paper filter and magnetic separator manual dressing device with diamond grinding wheel grinding wheel flange grinding wheel balancing gauge balancing arbor LED machine light Machine and equipment comply with CE regulations Operating manual in GERMAN and ENGLISH

Stav: nový, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €73,460 Leasing rate: €1,388.39 Grinding length: 610 mm Distance spindle – table: 600 mm Table: 600 x 300 mm Magnetic chuck: 600 x 300 mm Max. workpiece weight: 420 kg Table movement, hydraulic: 700 mm Table speed: 5 – 25 m/min Cross feed: 0 – 2,250 mm/min Cross feed, incremental: mm Max. cross feed: 350 mm Automatic vertical feed: 440 mm Vertical feed: 0 – 675 mm/min Vertical feed, incremental: 0.001 – 0.04 mm Klsdewirc Njpfx Ac Ner Spindle speed: 500 – 2,000 rpm Spindle motor: 5.5 kW Hydraulic motor: 0.75 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 2,710 mm Width: 2,428 mm Height: 2,200 mm Weight: 3,500 kg Table height: 975 mm Grinding wheel dimensions: 355 x 50 x 127 mm 10.4” graphic NC control on swivel arm with touchscreen for: - Mode selection, program creation, graphical status monitoring, alarm list automatic vertical feed complete enclosure of the working area servo drive for grinding wheel infeed and table cross adjustment hardened guideways in all 3 axes with needle bearings electro-magnetic chuck coolant system with automatic paper filter and magnetic separator automatic dressing device mounted on table, without diamond, with automatic compensation * grinding wheel grinding wheel flange grinding wheel balancing scale balancing arbor LED machine lamp machine and equipment comply with CE regulations operating manual in GERMAN and ENGLISH * the exact configuration of the dressing device must be clarified prior to ordering (stock example photo)

Stav: nový, Rok výroby: 2026, Condition: New Year of manufacture: 2026 Stock number: 050163 Delivery time: May 2026, subject to prior sale Country of origin: Taiwan Price: €86,130 Leasing rate: €1,627.86 Grinding length: 1,015 mm Distance spindle - table: 600 mm Table size: 1,000 x 400 mm Magnetic chuck: 1,000 x 400 mm Max. workpiece weight: 670 kg Table movement (hydraulic): 1,100 mm Table speed: 5 - 25 m/min Cross feed: 0 - 2,250 mm/min Incremental cross feed: mm Max. cross travel: 450 mm Automatic vertical feed: 440 mm Vertical feed range: 0 - 675 mm/min Incremental vertical feed: 0.001 - 0.04 mm Spindle speed: 500 - 2,000 rpm Spindle motor: 5.5 kW Hydraulic motor: 1.5 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 3,630 mm Width: 2,682 mm Height: 2,200 mm Transport dimensions: 4,400 x 2,300 x 2,400 mm Weight: 4,800 kg Max. workpiece weight on magnetic chuck: 423 kg Max. workpiece weight on clamping table: 670 kg Grinding wheel dimensions: 355 x 50 x 127 mm 10.4" graphical NC control panel on swiveling arm with touchscreen for: - Selection of operating modes, program creation, graphical status monitoring, alarm list automatic vertical feed full enclosure of the working area servo drive for grinding wheel infeed and cross table movement hardened guideways on all three axes with needle bearings electromagnetic chuck coolant system with automatic paper filter and magnetic separator oil mist extraction system automatic table-mounted dressing device without diamond, with automatic compensation grinding wheel grinding wheel flange grinding wheel balancing gauge balancing arbor Kodpewirciofx Ac Njlr LED machine lamp Machine and equipment compliant with CE regulations Operating instructions in German and English

Stav: nový, Condition: new Delivery time: approx. 6 months from order confirmation Country of origin: Taiwan Price: €119,350 Leasing rate: €2,255.72 Grinding length: 610 mm Distance spindle to table: 600 mm Table size: 600 x 300 mm Magnetic chuck: 600 x 300 mm Table speed: 0 – 20 m/min Cross feed: 0 – 3,000 mm/min Incremental cross feed: 0.001 mm Max. cross feed: 350 mm Automatic vertical feed: 440 mm Vertical feed: 0 – 3,000 mm/min Incremental vertical feed: 0.001 mm Spindle speed: 500 – 1,800 rpm Spindle motor: 11 kW Length: 3,160 mm Kjdpfx Acswirb Sj Nslr Width: 2,450 mm Height: 2,080 mm Transport dimensions: 3,400 x 2,200 x 2,530 mm Weight: 4,000 kg Table height: 975 mm Max. workpiece weight on magnetic chuck: 195 kg Max. workpiece weight on clamping table: 370 kg Grinding wheel dimensions: 355 x 50 x 127 mm Servo drive motors Y/Z: 1.1 / 1.1 kW Servo drive motor X: 3.9 kW Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Smart i control with 10.4" touchscreen on swiveling panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-Code) - PC-based control with graphical dialogue programming or G-code programming Infinitely variable speed Surface grinding cycle, traverse grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with needle bearings for very low friction, higher accuracy, and low maintenance costs All 3 axes with precision ball screws (class C2) and AC servo motors Full enclosure with lighting Electro-magnetic chuck Coolant system 120 l with automatic paper filter and magnetic separator Automatic dressing unit mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing stand Machine and equipment according to CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard: ISO 1986-1 * The exact configuration of the dressing unit must be clarified prior to order placement.

Stav: nový, Condition: new Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €123,650 Leasing rate: €2,336.99 Grinding length: 1,015 mm Distance spindle to table: 600 mm Table: 1,000 x 400 mm Magnetic chuck: 1,000 x 400 mm Hydraulic table travel: 1,100 mm Table speed: 5 – 25 m/min Cross feed: 0 – 3,000 mm/min Incremental cross feed: 0.001 mm Max. cross travel: 450 mm Automatic vertical feed: 440 mm Vertical feed: 0 – 3,000 mm/min Incremental vertical feed: 0.001 mm Spindle speed: 500 – 1,800 rpm Spindle motor: 11 kW Hydraulic motor: 2.2 kW Cross feed motor: 1.1 kW Grinding wheel feed drive: 1.1 kW Length: 4,450 mm Klodjwiq Taepfx Ac Nsr Width: 2,655 mm Height: 2,080 mm Weight: 4,200 kg Max. workpiece weight on magnetic chuck: 250 kg Max. workpiece weight on clamping table: 470 kg Grinding wheel dimensions: 355 x 50 x 127 mm Positioning accuracy: 0.005 mm Repeatability: 0.003 mm Smart i control system with 10.4" touchscreen on swiveling panel, with electronic handwheel (wired) - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal guides with double V-profile, with Turcite-B coating Cross and vertical axes with precision ball screws (class C2) and AC servomotors Longitudinal feed hydraulic Fully enclosed with lighting Electro-magnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device mounted on the table, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing device Machine and equipment comply with CE regulations Operating manual in GERMAN or ENGLISH * The exact configuration of the dressing device must be clarified prior to ordering

Stav: nový, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €108,950 Leasing rate: €2,059.16 Grinding length: 610 mm Distance spindle to table: 600 mm Table: 600 x 300 mm Magnetic chuck: 600 x 300 mm Table speed: 5 - 25 m/min Cross feed: 0 - 3,000 mm/min Incremental cross feed: 0.001 mm Max. cross travel: 350 mm Automatic vertical feed: 440 mm Vertical feed: 0 - 3,000 mm/min Incremental vertical feed: 0.001 mm Spindle speed: 500 - 1,800 rpm Spindle motor: 11 kW Hydraulic motor: 2.2 kW Length: 4,020 mm Width: 2,450 mm Height: 2,080 mm Transport dimensions: 3,400 x 2,220 x 2,530 mm Weight: 3,700 kg Table height: 975 mm Max. workpiece weight on magnetic chuck: 195 kg Max. workpiece weight on clamping table: 370 kg Grinding wheel dimensions: 355 x 50 x 127 mm Servo feed motors Y/Z: 1.1 / 1.1 kW Positioning accuracy: 0.005 mm Repeatability: 0.005 mm Smart i control with 10.4" touchscreen on swivel panel, with electronic handwheel (wired) - RS232, USB I/O interface - SMART Grind Cam (DXF transfer to C-code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, traverse grinding cycle, plunge grinding cycle, multiple slot grinding cycle, contour grinding cycle, dressing cycle Spindle with 4 angular contact ball bearings (P4, class 7) Longitudinal and cross guides with needle bearings for very low friction, increased accuracy and low maintenance costs Ksdpfx Aowiq H Tjc Nelr Cross and vertical feeds with precision ball screws (class C2) and AC servo motors Longitudinal feed hydraulic Full enclosure with lighting Electro-magnetic chuck Coolant system 120 litres with automatic paper filter and magnetic separator Automatic dressing unit mounted on table, with automatic compensation* Grinding wheel Grinding wheel flange Grinding wheel balancing device Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 *The exact configuration of the dressing unit needs to be clarified before ordering.

Stav: nový, Condition: New Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €118,700 Leasing rate: €2,243.43 Grinding length: 1,200 mm Distance spindle to table: 730 mm Table: 1,200 x 500 mm Magnetic chuck: 1,200 x 500 mm Max. table speed: 30 m/min Hydraulic motor: 3.7 kW Total connected load: 27 kVA (kW) Length: 4,600 mm Width: 3,040 mm Height: 2,200 mm Weight: 6,400 kg Table height: 990 mm Max. workpiece weight on magnetic chuck: 930 kg Max. workpiece weight on clamping table: 1,250 kg Grinding wheel dimensions: 405 x 50 x 127 mm Minimum input: 0.001 mm Spindle speed: 500 – 2,000 rpm Spindle drive: 11 kW Kjdowiq Hmepfx Ac Njlr 10.4" iSurface graphic CNC control on swiveling arm with touchscreen for: - Operating mode selection - Cycle selection and program creation - Surface grinding - Crossover grinding - Plunge grinding - Dressing with automatic compensation - Semi-automatic balancing in the machine - Automatic spindle speed for constant surface speed - Spindle load visualization - Imbalance control - Graphic status monitoring - Alarm list Max. table speed: 30 m/min Vertical feed via servomotor and ball screw Cross feed via servomotor and ball screw Double V-guideway (Turcite-B) for table longitudinal travel Grinding wheel spindle on 6 high-precision angular contact ball bearings Electromagnetic chuck Coolant system with automatic paper filter and magnetic separator Automatic dressing device mounted on the table, without diamond, with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing device Balancing arbor LED machine lamp Machine and equipment according to CE regulations Operating instructions in GERMAN and ENGLISH * The exact configuration of the dressing device must be clarified before ordering.

Stav: nový, Condition: New Delivery time: approx. 6 months from order placement Country of origin: Taiwan Price: €232,570 Grinding length: 1700 mm Distance spindle to table: 850 mm Table dimensions: 1600 x 600 mm Magnetic chuck: 2x 800 x 600 mm Table speed: 0 - 20 m/min Klsdpfxowiq Eio Ac Njr Cross feed: 0 - 5000 mm/min Incremental cross feed: 0.001 mm Max. cross travel: 685 mm Vertical feed: 0 - 2000 mm/min Incremental vertical feed: 0.001 mm Max. vertical travel: 675 mm Spindle speed: 500 - 2200 rpm Spindle motor: 11 kW Length: 6165 mm Width: 3320 mm Height: 2850 mm Transport dimensions (gross): 5730 x 3200 x 3350 mm Weight: 9500 kg Table height: 900 mm Max. workpiece weight on magnetic chuck: 1335 kg Max. workpiece weight on clamping table: 1850 kg Grinding wheel dimensions: 405 x 50 x 127 mm Servo feed motors Y/Z: 3.1 / 3.1 kW Servo feed motor X: 7.5 kW Positioning accuracy X: 0.008 mm, Y/Z: 0.005 mm Repeatability X: 0.006 mm, Y/Z: 0.003 mm SMART i control with 10.4” touchscreen on swiveling panel with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (dxf transfer to C-Code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Flat grinding cycle, cross grinding cycle, plunge grinding cycle, multiple groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitudinal guides with double V-form and Turcite-B coating All 3 axes with precision ball screws (class C2) and AC servo motors Full enclosure with lighting Electro-magnetic chuck Coolant system 250 L with automatic paper filter and magnetic separator Automatic dresser mounted on the table with automatic compensation * Grinding wheel Grinding wheel flange Grinding wheel balancing device Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 * The exact configuration of the dressing unit must be clarified before ordering.

Stav: nový, Condition: new Delivery time: approx. 6 months from order Country of origin: Taiwan Price: €247,540 Grinding length: 2,100 mm Distance spindle - table: 850 mm Table: 2,000 x 600 mm Magnetic chuck: 2x 1,000 x 600 mm Table speed: 0 - 20 m/min Cross feed: 0 - 5,000 mm/min Incremental cross feed: 0.001 mm Max. cross travel: 685 mm Vertical feed: 0 - 2,000 mm/min Incremental vertical feed: 0.001 mm Max. vertical travel: 675 mm Spindle speed: 500 - 2,200 rpm Spindle motor: 11 kW Length: 7,710 mm Width: 3,320 mm Height: 2,850 mm Transport dimensions (gross): 6,530 x 3,200 x 3,350 mm Weight: 10,200 kg Kedpewiq Ecefx Ac Nelr Table height: 900 mm Max. workpiece weight on magnetic chuck: 1,240 kg Max. workpiece weight on clamping table: 2,000 kg Grinding wheel dimensions: 405 x 50 x 127 mm Servo feed motors Y/Z: 3.1 / 3.1 kW Servo feed motor X: 7.5 kW Positioning accuracy X: 0.008 mm, Y/Z: 0.005 mm Repeatability X: 0.006 mm, Y/Z: 0.003 mm Smart i control with 10.4" touchscreen on swiveling panel, with electronic wired handwheel - RS232, USB I/O interface - SMART Grind Cam (DXF transfer into C-code) - PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multiple slot grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (P4, class 7) Longitudinal guides with double V-form, Turcite-B coated All 3 axes with precision ball screws (class C2) and AC servomotors Full enclosure with lighting Electromagnetic chuck Coolant system 250 l with automatic paper filter and magnetic separator Automatic dresser mounted on table, with automatic compensation* Grinding wheel Grinding wheel flange Grinding wheel balancing device Machine and equipment in accordance with CE regulations Operating manual in GERMAN or ENGLISH Accuracy standard ISO 1986-1 *The exact configuration of the dressing device must be clarified prior to ordering.