Dopravné Zariadenia kúpiť použité (44 910)

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. Rodpfxjfz Apqe Acyecd New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Spoločnosť ROMER sa tiež podieľa na výrobe závesných dopravných systémov. Priečne prechody (priečne transporty) sú navrhnuté a vyrobené pre špecifické inštalácie. Príklady zariadení sú uvedené nižšie: dopravníkové systémy. V závislosti od požiadaviek zákazníka sa dopravné systémy môžu pohybovať po podlahe alebo byť zavesené na koľajach. Redpfefz Difsx Acyjcd - Pre komfortné riešenia pri manuálnych inštaláciách odporúčame závesné priečne nosníky (priečny transport). - Pri automatizovaných systémoch sa najčastejšie používajú reťazové dopravníky, ktoré sú nepretržité a predstavujú vynikajúce riešenie pre firmy, ktoré sa zameriavajú na kvalitu a opakovateľnosť procesu. - Pre podniky, ktoré vyrábajú rôzne produkty súčasne a napríklad prevádzkujú viacero kabín s rôznymi farbami, sa používajú flexibilné riešenia s využitím gravitačného (nepoháňaného) dopravníka. Toto riešenie je najdrahšie.

Rok výroby: 2020, stav: nový, The company ROMER is also involved in the production of overhead conveyor systems. Cross transfers (lateral conveyors) are designed and manufactured for specific installations. Examples of equipment are listed below: Conveyor systems. Depending on customer requirements, the conveyor systems can either run on the floor or be suspended from rails. Rodpfjfz Dibox Acyocd - For ergonomic solutions in manual installations, we recommend overhead crossbeams (lateral transport). - For automated systems, chain conveyors are most commonly used. These operate continuously and are an excellent solution for companies focusing on process quality and repeatability. - For businesses producing various items simultaneously and, for example, operating multiple cabins with different colours, flexible solutions using a non-powered conveyor are implemented. This is the most expensive solution.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Rcsdpfxsfz Dt Ns Acyjd Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. Rodpfx Acsfz I D Dsyocd The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Rcjdpfx Asfz I Edscysd Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. Rcsdpefzkrnefx Acyod New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Rcjdpfx Aoflmdwecyjd Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. Rcodpfxofz Nb Te Acyed All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well. Rcsdpfofz U S Eox Acysd

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Redjfz U Tispfx Acyecd Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Stav: dobrý (použitý), Počet kusov: 1 ks Hahn & Kolb SUBITO SU zariadenie na presné vnútorné meranie SU100-160mm 7 násad 4 kotúče Rcjdpjzb Rapsfx Acysd Bez úchylkomeru V drevenom puzdre. Na presné meranie otvorov pomocou 2-bodovej meracej metódy. Otočením a/alebo posunutím prístroja v otvore je možné zistiť tvarové odchýlky. Pohyblivý merací tŕň má tvrdokovové osadenie, rovnako aj pevný merací tŕň. Samočinné centrovanie v otvore Vysoká opakovateľnosť merania.

Stav: použitý, Funkcionalita: plne funkčný, nosnosť: 3 000 kg, pohotovostná hmotnosť: 330 kg, Clamp attachment Condition: Ready for use and fully functional Rcodou Dzzpepfx Acyjd Technical condition: very good Description: In addition to this Riman model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders available at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Leasing and financing on favorable terms are always possible for us. We would also gladly purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with comprehensive advice on this PH100. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale at our premises.

Stav: použitý, Článok: Zariadenie na úpravu kovových triesok Značka: Lanner Typ: Vetamat DS32 Rok výroby: 2010, generálne opravené v roku 2025 Patentované zariadenie Vetamat spoľahlivo oddeľuje kovové triesky od chladiacej a mazacej kvapaliny (KSS). Zariadenie dosahuje prietok až do 2 000 kg/h. Kompletný systém pozostáva z odstredivky, dopravníka triesok s nádržou, zbernej vane a riadiacej jednotky. V závislosti od typu materiálu je možné zvoliť parabolickú odstredivku alebo odstredivku s tlačnou podlahou. Vďaka modulárnej konštrukcii je možné zariadenie Vetamat rozšíriť o drvič triesok, veľkú uzáveru na oddeľovanie hrubých dielov, zdvíhacie a vyklápacie zariadenie alebo systém úpravy KSS. - veľmi rýchle uvedenie do prevádzky - dodanie na kľúč - nenáročné na priestor - veľmi dobrá prístupnosť - modulový systém - montované olejuvzdorne na vani podľa WHG - vysoká prevádzková bezpečnosť - osvedčená technológia Lanner - plne automatická prevádzka so Stand-by funkciou Rcodpjzcyfwjfx Acyjd - rozšíriteľné na spracovanie dlhých triesok a čistenie chladiacej kvapaliny - nádoba na triesky pod odstredivkou prístupná z troch strán Pre viac informácií a fotografie nás prosím kontaktujte cez mail(at) alebo

Stav: použitý, LS 303 - Sklenené meradlo s čítacou hlavou Dĺžka: ML 920 mm HEIDENHAIN LS 303 ID 22897526 SN: 1769976F Rcsdpfxozcq Nmj Acyed

Stav: použitý, LS 403 C - Sklenené meradlo Dĺžka: ML 620 mm Rjdpezcq Ivsfx Acyecd HEIDENHAIN LS 704 C ID 23713402 SN: 4514662K

Stav: použitý, LS 403 C - sklenené pravítko Rcedpfx Ajzcq Ipecysd Dĺžka: ML 920 mm HEIDENHAIN LS 403 C ID 23319137 SN: 4506726 P

Stav: použitý, LS 603 - Sklenené meradlo s čítacou hlavou Dĺžka: ML 820 mm HEIDENHAIN LS 603 Redpfezcq E Isx Acyocd ID 22852924 SN: 1877790 A

Stav: použitý, Merací rozsah v mm: 0 - 1000 mm Rodpfx Aszcq D Djcyecd Odsčítanie v mm: 0,01 Výškomer

Stav: nový, BALLUFF BTL5-P1-M0400-P-SA225-KA00,5 Micropulse snímač polohy Rcedpfx Ajzcgktscysd Stav: Nový

Stav: použitý, Optické zariadenie Značka: Heidenhain Rcodocifpmjpfx Acyed Typ: OZA II 02 - 6 Číslo zariadenia: 2739 Montážna vzdialenosť: 14,30

Stav: dobrý (použitý), číslo stroja/vozidla: 3626, Rok výroby: 1991, nosnosť: 27 000 kg, celková dĺžka: 12 150 mm, celková šírka: 2 700 mm, prevádzková hmotnosť: 5 300 kg, ELME 340 od Uniktruck Redpfxozid Hko Acyscd

Stav: použitý, Funkcionalita: plne funkčný, Rôzne použité dopravníkové pásy na sklade Rjdpfx Acowm Niboyocd Šírka pásu: medzi 500 a 1 200 mm Dĺžka osi: od 2 do 40 m pre sypké minerálne materiály všetkých druhov s alebo bez podpier, čiastočne s pojazdným podvozkom

Stav: dobrý (použitý), Rok výroby: 2012, Predávam automatickú optimalizačnú kapovaciu pílu Salvador Superpush 200, rok výroby 2012. Automatický vstupný stôl 5,10 m (systém posúvača) Výstupný stôl 3,00 m Celková dĺžka: 9,00 m Rcsdsyi Suwjpfx Acysd Optimalizácia s automatickým programovaním rezacích schém. Dostupné ihneď. CE výbava. Dokumentácia je súčasťou.

Stav: pripravené na použitie (použité), Rok výroby: 2001, - POUŽITÝ - CO₂ LASEROVÝ REZNÝ STROJ S VÝMENNÝM STOLOM POJAZD OSI X: 3000 mm POJAZD OSI Y: 1500 mm POJAZD OSI Z: 115 mm Redoy T S Akopfx Acyecd PRACOVNÁ OBLASŤ: 3000 x 1500 mm ZDROJ: TLF 3000 TURBO; 3000 W RIADIACA JEDNOTKA: SIEMENS 840D HMOTNOSŤ: 11 500 kg CELKOVÉ ROZMERY: 9800 x 5300 x 2000 mm POZNÁMKA: S OVLÁDACÍM SOFTVÉROM LIBELLULA