Weiler Condor Vs2 kúpiť použité (293)

Stav: použitý, L + Z lathe VOEST ALPINE - WEILER Type DA 210 / 1 Machine no. 1-004/2552 Year of manufacture: 1983 Centre distance: 1000 mm Swing over bed: 420 mm Centre height over bed: 210 mm Swing over cross slide: 240 mm Centre height over cross slide: 120 mm Spindle bore: 52 mm Spindle speeds: 33 - 1500 rpm, 12 steps Chuck flange: Short taper DIN 55027 size 6, 4x M12 Tailstock taper: MT 4 Motor power: 5.5 kW Electrical connection: 380 Volt, 50 Hz - Spindle speeds via 12-speed gearbox - 3-jaw scroll chuck EMCO Ø 200 mm with standard and inside-out jaws - Multifix quick-change tool post size B with 3 tool holders - Automatic longitudinal and cross feed - Coolant system - Spindle brake - Emergency stop Godpfx Aljykca Hj Toka - Machine lamp - Operating manual Space requirement (L x W x H): 2200 x 1200 x 1450 mm Weight: 1400 kg Very good condition

Stav: pripravené na použitie (použité), L&Z sústruh WEILER LZ 330 vrátane nového 3-osého digitálneho odpočtu (z učilišťa) - 3-osý digitálny odpočet "NOVÝ" - Výška hrotu: 165 mm - Priemer sústruženia nad lôžkom: 330 mm - Dĺžka sústruženia: 800 mm - Rozsah otáčok (prevodovka): 25-2800 ot./min - Automatické pozdĺžne / priečne posuvy - Nový Multifix základný držiak s vložkami Gsdpfxoy Id Uhe Al Teka - 3-čeľusťové skľučovadlo - Zariadenie na upínacie puzdrá s 20 ks puzdier - Originálne kopírovacie zariadenie - Rôzne príslušenstvo - Dokumentácia Rozmery (DxŠxV): 1,8x0,7x1,6 m / Hmotnosť 800 kg Chyby a preklepy vyhradené.

Stav: dobrý (použitý), Rok výroby: 1991, Type of machine: Cycle-controlled lathe Manufacturer: WEILER Model: E30 Year of manufacture: 1991 Control: Weiler Country of origin: Germany Additional information: Cycle-controlled lathe Gkedpjr Dvqzefx Al Tja WEILER - E30 Technical details Turning diameter: max. 330 mm Turning length: 750 mm Control: Weiler Centre height: 165 mm Swing diameter over bed: 330 mm Max. swing diameter over cross slide: 160 mm Cross slide travel: 180 mm Bed saddle longitudinal travel: 395 mm Main spindle: Speed range – main spindle: 1 – 4,500 rpm Main spindle drive power: 9 / 11 kW Max. torque: 165 Nm Spindle nose: DIN 55027 / 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40 mm Usable bar diameter: ( - ) mm Tool holder: Type: MultiFix Cutting tool shank section: 20 x 20 mm Tailstock: Quill stroke: 110 mm Quill diameter: 50 mm Tailstock taper: MK 3 Feeds: Rapid traverse: max. 10 m/min Feed force: 6 / 3 kN Feed range: 0 – 20 mm/min Thread cutting: Metric: 0.1 – 400 mm Inch: 1/4 – 56 TPI Module: 0.125 – 28 mm.II DP: 1 – 224 TPI.II Number of threads: max. 50 Total power requirement: 10 kVA Machine weight approx.: 1.5 t Space requirement approx.: 2.8 x 2.0 x 2.0 m

Stav: pripravené na použitie (použité), Rok výroby: 2005, L & Z Sústruh / WEILER DA 210x1000 / S novým 3-osovým digitálnym ukazovateľom -Rok výroby 2005 -CE označenie -Vedenia v dobrom stave -KOMPLETNÉ TECHNICKÉ ÚDAJE VIĎ FOTO -Trojosový digitálny displej „NOVÝ“ -Rýchloupínacie zariadenie s 79 upínacími klieštinami (173E) -Základný držiak Multifix s vložkami -Trojčeľusťové skľúčidlo Gkjdpfx Aljy H Ikqo Tsa -Elektrická ochrana skľúčidla -Prídavná posuvná ochrana -Chladiace zariadenie -Vŕtacie skľúčidlo / otočný hrot -Ochrana proti trieskam -Pracovné osvetlenie -Kompletná dokumentácia Rozmery: DxŠxV 2,8x1,2x1,8 m / Hmotnosť 1600 kg Chyby a omyly vyhradené.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor lead and feed screw lathe with 3-axis digital readout K&C, COMPLETELY OVERHAULED with acceptance protocol for new machine tolerances Technical Data: >> Machine No.: 2268-87 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 Camlock >> Tailstock: Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle brake switchable >> Drive power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis digital readout K&C, new, 12-month manufacturer's warranty with manual >> NEW 200 mm 3-jaw chuck, 2 sets of jaws >> Multifix size B with 3 NEW toolholders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp Safety features include: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available upon request About the machine: Gkedjymznhspfx Al Tsa Offered here is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground or hand-scraped. Acceptance as per inspection protocol. Painted in 2K high-gloss white. The Multifix toolpost and chuck are new. For safety: The machine features a brake motor, electronic spindle guard and two emergency stop buttons - an absolutely as-new-condition lathe. Even at high speeds, the Weiler runs very smoothly. This latest generation of Weiler lathes is exceptionally user-friendly and capable of producing ground-like surface finishes. Take advantage of the opportunity to view and test the machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1989, Funkcionalita: plne funkčný, Weiler Praktikant 140 B Lead and Feed Screw Lathe in Toolroom Accuracy with 3-Axis Digital Readout from K&C - NEW!!! Technical Data: >> Year of manufacture: 1989 Machine No. 89-140-1471 >> Centre height: 140 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Dimensions (L x H x W): 1.6 m x 1.25 m x 0.7 m Gedpfoymdymsx Al Tska Accessories and Equipment: >> 3-axis digital readout from K&C, new, with 12 months manufacturer's warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference marker, tool programming for 200 tools, taper calculation, radius/diameter, rapid zeroing, counting direction switching. >> NEW collet chuck set with collets from 3 to 25 mm, 1 mm increments, NEW >> 160 mm 3-jaw chuck with one set of jaws >> Multifix size A with 2 tool holders >> Faceplate >> Bed stop >> Rear panel >> Machine feet >> Electronic spindle guard >> Operating manual For safety: Electronic spindle guard, leadscrew and feedscrew cover, 2 emergency-stop buttons, spindle brake, electronic change gear door interlock About the machine: Offered is a Weiler Praktikant 140 B lead and feed screw lathe in very good condition. This is a very nice lathe from a training workshop. All slides move smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of grinded-like surface finishes. Take the opportunity to view the machine on site under power and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Heidenhain Digital Readout – Excellent Condition!!! Technical Data: >> Year of manufacture: 1991, Machine No. 3140 >> Centre height: 180 mm >> Distance between centres: 1000 mm Gkodpoylh Ncefx Al Tsa >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55027 size 6 with bayonet lock >> Tailstock taper: Morse Taper 4 (MT4) >> Feeds: from 0.026 to 0.888 mm/rev >> Thread types possible: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Switchable spindle brake >> Motor power: 2.0/4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis digital readout by Heidenhain >> 200 mm three-jaw chuck, 2 sets of jaws >> Multifix size B quick-change toolpost with 3 toolholders >> Drill chuck, centre >> Bed stop >> Machine mounts About the Machine: For sale is a Weiler Commodor lathe in excellent, fully functional condition. The machine comes from a government facility where it saw only limited use. The Commodor is one of the largest manual lathes manufactured by Weiler. It is an extremely robust and powerful machine. The Heidenhain 3-axis digital display makes operation even easier and more precise. The machine has been thoroughly electrically and mechanically inspected by us. A complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our premises.

Stav: veľmi dobrý (použitý), Rok výroby: 1998, Funkcionalita: plne funkčný, číslo stroja/vozidla: 4397, Dear Sir or Madam, For sale is a Weiler Praktikant 160 AC lathe, year of manufacture 1998, equipped with the original Weiler 3-axis digital readout. This newer "AC" variant particularly stands out thanks to its infinitely variable speed control, which makes working on this already user-friendly machine even easier. The machine has been extensively partially overhauled in our workshop, so it is in excellent technical and visual condition. All guides are in good condition, the gearboxes run quietly and the levers shift smoothly. You are welcome to visit us and see the machine’s condition for yourself. Availability: on request Machine No.: 4397 Year of manufacture: 1998 Centre height: 160mm Centre distance: 650mm Spindle bore: Ø 40mm Spindle speed: 20–3000 rpm, stepless Tailstock taper: MT3 Quill travel: 85mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread cutting types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.25 – 8mm Spindle brake: switchable Total power requirement: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (LxHxW) Weight: approx. 720 kg Further equipment and accessories: 3-axis DRO, coolant system, chuck guard, jaw chuck, and additional accessories on request… Our service promise to you: Gedpoq H D U Eofx Al Tjka - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - If requested, we can fully or partially overhaul your selected machine - If requested, we can repaint your chosen machine in your desired colour - If requested, you can order additional accessories such as tools directly - If requested, we can mount further accessories such as safety devices - We are happy to take care of shipping and/or installation for you

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch Gksdpsvivmyofx Al Tja >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Shaft Lathe with 3-axis K&C Digital Readout, COMPLETELY OVERHAULED with Inspection Protocol according to New Machine Tolerances Godpfx Alovrckqj Toka Technical Data: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads possible: Metric, Inch, Module, and Diametral Pitch >> Metric Pitch Range: 0.35 to 12 mm >> Weight approx. 1,500 kg >> Spindle Brake Switchable >> Drive Power: 2.0 / 4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Features: >> 3-axis K&C digital readout, new, 12 months manufacturer's warranty with user manual. Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter switching, quick zeroing, counting direction switching >> 3-jaw wedge bar chuck in almost new condition, 200 mm, 1 set of jaws >> Multifix size B with 2 tool holders NEW >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle safety guard >> Spindle brake >> 2 emergency stops On request: Lead and feed shaft covers About the Machine: Offered is a Weiler Commodor lead and feed shaft lathe in geometrically overhauled condition. The guides have been reground or hand-scraped as new. Acceptance according to test protocol. Resprayed in 2K high-gloss white. Multifix toolpost and chuck are new. For safety: The machine features a brake motor, electronic spindle safety guard, and two emergency stops — an absolutely as-new condition lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and surfaces with a ground finish can be produced. You are welcome to inspect the machine under power at our premises to verify its exceptional condition.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEWLY Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No. 1824 >> Centre height: 180 mm >> Centre distance: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm >> Short taper spindle nose DIN 55029 size 5 >> Tailstock Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Supported thread types: metric, inch, module and diametral pitch threads >> Metric thread pitches: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake, switchable >> Motor power: 2.0/4.0 kW >> Dimensions (LxHxW): 2.2 m x 1.5 m x 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer warranty with operating manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction switching >> 200 mm three-jaw wedge bar chuck, as new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stops Optional: Covers for lead and feed screw About the Machine: Offered here is a Weiler Commodor lead and feed screw lathe in a geometrically overhauled condition. The guides are newly ground or scraped. Acceptance according to test protocol. 2K white gloss paintwork. The Multifix tool post and chuck are new. Gkodpfxovrcqdj Al Tea Safety: The lathe features a brake motor, electronic spindle protection, and two emergency stops—an absolutely as-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and surface finishes comparable to grinding can be achieved. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition! Technical Specifications: >> Machine No. 2801 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 – 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch possible >> Metric thread pitches: 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc. Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet chuck assembly with collets from 2 mm to 12 mm (1 mm increments) incl. draw tube >> Multifix size A with 4 tool holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in excellent condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs smoothly. The Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to the cabinet). Gkjdev Tyzcepfx Al Tsa Digital readout available at extra cost.

Stav: použitý, Funkcionalita: plne funkčný, Weiler Matador VS-2 Lead and Feed Screw Lathe Technical Specifications: >> Year of manufacture: approx. 1970 Machine No. M1012 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speed: 30 – 3,550 rpm >> Spindle bore: 36 mm >> Short taper spindle nose DIN 55022-5 with bayonet locking >> Tailstock Morse taper 3 >> Feeds from 0.010 to 1.184 mm/rev >> Threads: metric, imperial, module and diametral pitch possible >> Metric thread pitches from 0.25 to 15 mm >> Weight: approx. 700 kg >> Dimensions: length 1.4 m, height 1.2 m, depth 0.55 m Accessories and Equipment: >> Collet chuck system with 32 collets (set incomplete) and matching receiver >> 1 three-jaw chuck incl. set of jaws Godevv Etvjpfx Al Tjka >> 1 four-jaw chuck incl. set of jaws >> Multifix quick-change toolpost, size A, with 2 tool holders >> Change gears >> Bed stop About the machine: For sale is a used Weiler Matador VS-2 in fully functional condition. You are welcome to inspect the machine under power at our site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself. Godpevtp Edjfx Al Teka

Stav: veľmi dobrý (použitý), Rok výroby: 1986, Funkcionalita: plne funkčný, Weiler Praktikant 160 B Leit- und Zugspindeldrehmaschine mit 3-Achs Digitalanzeige K&C NEU Technické údaje: >> Rok výroby: 1986, výrobné číslo: 86-160-348 >> Výška hrotu: 160 mm >> Vzdialenosť medzi hrotmi: 650 mm >> Počet rýchlostí vretena: 8, v rozmedzí od 96 do 2500 ot./min >> Priechod vretena: 40 mm >> Krátkokužeľová hlava vretena podľa DIN 55027, veľkosť 5 s bajonetovým uzáverom >> Koník: MK 3 >> Posuvy: od 0,02 do 0,63 mm/ot >> Možné závity: metrické, palcové, modulárne a diametral-pitch Gkjdpfx Alowthbie Tsa >> Metrické stúpanie závitov: 0,25 až 8 mm >> Hmotnosť cca 680 kg >> Vretenová brzda pripojiteľná >> Rozmery: dĺžka 1,6 m, výška 1,25 m, hĺbka 0,7 m Príslušenstvo a výbava: >> 3-osá digitálna indikácia K&C Nová, 12-mesačná záruka výrobcu s návodom na obsluhu Funkcie: prepínanie mm/palec, voľba súradníc ABS/INC, delenie zobrazenej hodnoty na polovicu, referenčná značka, programovanie nástrojov (200 pozícií), výpočet kužeľa, polomer/priemer, rýchle vynulovanie, prepínanie smeru počítania, >> Upínacie klieštiny, takmer nové, od 1 do 29 mm v krokoch po 1 mm >> Nové 3-čeľusťové skľučovadlo 160 mm s dvoma sadami čeľustí >> Mulifix veľkosť A s 3 držiakmi nástrojov >> Elektrický kryt skľučovadla >> Pozdĺžny doraz lôžka >> Zadná stena >> Nôžky stroja >> Chladiace zariadenie O stroji: Na predaj je sústruh s vedenou a ťahanou skrutkou Weiler Praktikant 160 B v presnosti vhodnej pre nástrojárov, vo veľmi dobrom stave. Stroj je plne funkčný. Stroja bol kompletne demontovaný a nanovo nalakovaný v svetlosivej farbe. Sanie sa pohybujú veľmi ľahko a rovnomerne. Aj pri vysokých otáčkach beží sústruh Weiler ticho. Táto novšia generácia sústruhov Weiler je veľmi užívateľsky prívetivá a umožňuje dosiahnuť povrchy s kvalitou brúsenia. Využite možnosť vidieť tento stroj na mieste pod napätím a presvedčiť sa o jeho stave osobne.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm Gkedpeu Aftgofx Al Tea >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Praktikant 160B Precision Centre Lathe, 3-Axis K&C Digital Readout NEW. Refurbished with certification protocol for new-machine tolerances. Technical Data: >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Centre distance: 650 mm Gkodpfjvrdlcjx Al Toa >> Spindle speeds: from 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose, DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake engageable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories & Equipment: >> 3-axis digital readout system from K&C, new, with 12-month manufacturer warranty and user manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> New collet chuck, NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> New LED machine lamp >> New machine feet >> Splash guard >> Operating manual, spare parts diagram (PDF) About the machine: Offered for sale is a Weiler Praktikant 160 B engine and leadscrew lathe in toolroom precision, fully overhauled geometrically. Refurbished with acceptance protocol for new-machine tolerances. For safety: Electronic work spindle protection, covers for leadscrew and feed shaft, 2 emergency stop buttons, and a braked motor. This newer generation of Weiler lathes is very user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power at our premises and see the condition for yourself.

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 160 mm, šírka v strede: 650 mm, ťah perom: 85 mm, celková dĺžka: 1 600 mm, celková šírka: 900 mm, celková výška: 1 500 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent technical and optical condition. All guideways are in good order, the gearboxes run smoothly and quietly, and the control levers can be operated effortlessly. You are welcome to inspect the machine’s condition at our facility in person. Availability: on request Centre height: 160mm Centre distance: 650mm Spindle bore: Ø 40mm Tailstock taper: MT3 Quill travel: 85mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: selectable Total connected load: 7.5 kVA Voltage: 400V Gkodpfju H U S Hsx Al Tja Dimensions: approx. 1.58 x 0.9 x 1.5m (LxHxW) Weight: approx. 720kg Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request… Our service promise to you: - We are a certified master craftsman business in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the machine of your choice - On request, we can repaint the machine in your desired colour - On request, you can order additional accessories such as tooling directly - On request, we can install additional accessories such as safety devices - We will gladly take care of shipping and/or installation

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Gsdpfx Aothd Shel Toka Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: použitý, Rok výroby: 1995, Swing diameter: 720 mm Turning length: 3,000 mm Control: Siemens 805 Swing diameter over support: 430 mm Spindle speed: 1,800 rpm Tailstock quill taper: MT 6 Steadies: 3 pieces Main drive motor: 36 kW Z-axis travel: 3,050 mm X-axis travel: 410 mm Swing diameter over cross slide: 430 mm Spindle drive: 28 kW Workpiece weight: 3,000 kg Spindle bore: 106 mm Three-jaw chuck diameter: 305 mm Total power requirement: . kW Gsdpfxjyqvbdj Al Teka Machine weight approx.: 6 t Space requirement approx.: 4 x 2.4 x 2 m Steady rest 1: diameter: 120-300 mm Steady rest 2: diameter: 220-400 mm Steady rest 3: diameter: 350-500 mm Chuck: Diameter: 315 mm The technical data are based on manufacturer or operator information and are therefore non-binding for us. Prior sale reserved; our terms and conditions of sale and business apply exclusively. About us More than 400 machines in our own stock Over 15,000 m² warehouse area, crane capacity 70 t More than 10,000 accessory items for your workshop If you would like to sell machines, production lines or your business, please contact us. You can find further offers on our website. Viewing by appointment possible. We look forward to your visit. Your Markus Hirsch Team

Stav: pripravené na použitie (použité), Rok výroby: 2002, Funkcionalita: plne funkčný, otvor vretena: 83 mm, sústružnícky priemer: 570 mm, priemer otáčania nad priečnym suportom: 340 mm, výška stredu: 280 mm, maximálna rýchlosť vretena: 2 500 ot./min, Stroj je vďaka masívnej konštrukcii vhodný na ťažké sústružnícke a sériové práce! TECHNICKÉ ÚDAJE Otáčkový rozsah: 1 – 2 500 ot./min Krútiaci moment: 1 300 – 1 600 Nm Priechodný priemer nad ložom: 570 mm Priechodný priemer nad supportom: 340 mm Výška hrotu: 280 mm Vzdialenosť medzi hrotmi: 2 000 mm Priemer vretenovej diery: 83 mm (voliteľne 128 / 165 mm) Počet pozícií v revolveri na nástroje: 8 Uchytenie revolvera: VDI 40 Priemer pinoly koníka: 80 mm Kužeľ vo vnútri koníka: MK5 Gkjdpeymx N Nsfx Al Toa DETAILY STROJA Riadiaci model: WEILER SIEMENS 810D Hlavný motor: 20 / 17 kW (60% / 100% ED) Rozmery & Hmotnosť Rozmery (D x Š x V): 3 850 mm × 1 850 mm × 1 750 mm Hmotnosť stroja: 4 200 kg

Rok výroby: 1977, stav: použitý, Weiler Matador lathe, year of manufacture approx. 1977, with three-jaw chuck and Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Gjdpfx Aenkad Sjl Tjka

Stav: pripravené na použitie (použité), Rok výroby: 1990, prevádzkové hodiny: 51 392 h, celková výška: 1 700 mm, celková hmotnosť: 1 300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting—from metric to DP threads—and includes a Multifix toolholder size B. Ideal for precise and versatile turning work. Contact us for further details on this machine. Additional equipment • Multifix toolholder B mounted • Fixed steady rest (optional) clamping range: 15–100 mm • Travelling steady (optional) clamping range: 10–85 mm • Collet set from 3 mm (in 0.5 mm increments) • Tailstock with an MT3 quill Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9 / 11 kW • Max. spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed drives • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10 / 7.5 / 5 / 3.5 m/min • Tailstock quill diameter: 50 mm • Tailstock quill travel: 110 mm • Tailstock taper: MT3 Additional Information Swing over cross slide: 160 mm Gkjdpeyaimfjfx Al Tja Bed width: 240 mm Cross slide travel: 180 mm Bed saddle guideway length: 395 mm Tool section (height/width): 20 x 20 mm Spindle nose to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Headstock spindle taper: MT5 Workpiece threading: Metric thread range: 0.1–400 mm Inch thread range: G/1" 1/4–56 Module thread range: mm DP thread range: 1–224 G/" Max. number of threads: 50 Dimensions Machine depth: 1800 mm

Stav: ako nová (výstavný stroj), WEILER COMMODOR 180 GSD / Nový stroj - výstavný stroj - K dispozícii zo skladu - Výstavný stroj / NOVÝ - NEPOUŽITÝ Gsdpfoy Dc Tzsx Al Toka - 3-osý digitálny ukazovateľ - CE označenie - Výška hrotu 180 mm - Obežný priemer nad lôžkom 380 mm - Obežný priemer nad suportom 215 mm - Vzdialenosť medzi hrotmi 1000 mm - Priemer priechodného otvoru 56 mm - Otáčky / prevodovka 25 - 2000 ot./min - Automatické pozdĺžne / priečne posuvy - Závity palcové / metrické atď. - Ochrana skľučovadla - Koník / kužeľ pinoly MK 4 - Vysunutie pinoly 150 mm - Zariadenie na chladenie - Multifix s vložkou - Trojčeľusťové skľučovadlo 200 - Pracovné osvetlenie - Zadná stena na triesky - Dokumentácia Rozmery: dxšxv 2,6x1,6x1,7 metra / Hmotnosť 2000 kg Možné chyby a omyly v údajoch vyhradené.

Stav: pripravené na použitie (použité), otvor vretena: 56 mm, sústružnícky priemer: 360 mm, výška stredu: 180 mm, WEILER Commodor B vrátane 3-osého digitálneho odpočtu Heidenhain -GS identifikácia -3-osý digitálny odpočet / Heidenhain -Rok výroby 1991 -Výška hrotu 180 mm -Točný priemer nad ložom 330 mm -Vzdialenosť medzi hrotmi 1000 mm -Priechod vretena 56 mm -Otáčky vretena 25-2000 ot/min -Automatický pozdĺžny / čelný posuv -Rezanie závitov / metrický / palcový / modulový atď. -Základný Multifix držiak s vložkami -Ochrana skľučovadla Gkedpjy Ak S Asfx Al Toa -2x núdzové vypínače -Trojčeľusťové skľučovadlo -Zadná ochrana proti trieskam -Veľmi zachovalý stav -Stroje nohy -Dokumentácia Rozmery: DxŠxV 2,3x1,2x1,6 metra / Hmotnosť 1600 kg Chyby a omyly vyhradené