Emsa Zariadenia Na Čistenie Nástrojov kúpiť použité (93 826)

Rok výroby: 2026, stav: nový, max. priemer náradia 400 mm Max. výška náradia 310 mm Prevádzkový tlak 2 bar ROTATHERM - Komorové umývacie zariadenia sa používajú vo všetkých oblastiach priemyslu a remesiel na cenovo efektívne čistenie rôznych predmetov a materiálov. Diely sa čistia podobne ako v umývačke riadu. Sú uložené v drôtenom koši a v uzatvorenom zariadení sú zo všetkých strán umývané horúcou lúhovou sprchou. Stroj sa spustí po zadaní požadovanej teploty a doby praní. Obehové čerpadlo dopravuje umývaciu kvapalinu cez dýzový systém, ktorý zároveň uvádza kôš do rotácie. (Voliteľne elektrický pohon koša) Po ukončení čistiaceho procesu sa zariadenie automaticky vypne. Diely je možné vybrať aj predčasne – v takom prípade sa pri zdvihnutí veka čerpadlo automaticky zastaví. ROTATHERM komorové umývacie zariadenia sú k dispozícii v rôznych veľkostiach a prevedeniach s krátkymi dodacími lehotami. Na želanie je možné stroje upraviť podľa špeciálnych požiadaviek. Väčšinou sa používajú čistiace prostriedky na vodnej báze, no naše čistiace stroje je možné použiť aj s rozpúšťadlami. V prípade potreby je možné dodať zariadenia v ex-ochrannom prevedení. Technické údaje EMSA ROTATHERM „Mini“ s uchytením na nástroje HSK: ----- Objednávacie číslo: 1.501 ROTATHERM priemyselný umývací automat Kryt z nehrdzavejúcej ocele Priemer koša: 410 mm Využiteľná výška: 180 mm Cjdpfxjyrtzdj Agregu Nosnosť: 50 kg Tlak rozprašovania bez/s filtrom: 1,5 / 2,3 bar Cirkulačný objem: 2,5 m³/h Objem nádrže: 35 l Výkon kúrenia: 2 kW Príkon: 2,5 kW Napätie: 220/230 V Frekvencia: 50 Hz Vrátane nasledujúceho príslušenstva: Objednávacie číslo 1.521 Príplatok za zvýšenie veka (využiteľná výška / max. dĺžka náradia 310 mm) Objednávacie číslo: 1.522 Uchytenie náradia pre HSK 63F (voliteľne namiesto koša) Objednávacie číslo: 3.614 Čistiaci prostriedok EM 40 – 10 x 10 l Balenie na palete ----- Cena stroja v uvedenej konfigurácii: na vyžiadanie! Možnosti: ----- Uchytenie náradia pre Powermat (voliteľne namiesto koša), cena: na vyžiadanie! Uchytenie HSK 63 E, na vyžiadanie! Filtračné zariadenie (0,08 m²), cena: na vyžiadanie! Umývačka nástrojov ROTATHERM je k dispozícii aj vo väčších verziách Standard, Maxi a XL. Všetky zariadenia je možné dodať aj so špeciálnym napätím. Cena na vyžiadanie. Pri objednávke príslušenstva sa môžu zmeniť uvedené technické údaje a prípadne aj dodacia lehota! Uvedené údaje sú orientačné. Zmeny konštrukcie vyhradené. Dodacia lehota: krátkodobo a podľa dohody. Všetky ceny zo závodu, bez balenia, dopravy, poistenia a zákonnej DPH. (technické údaje podľa výrobcu – bez záruky!)

Rok výroby: 2026, stav: nový, Max. tool diameter 400 mm Max. tool height 180 mm Operating pressure 2 bar ROTATHERM chamber cleaning systems are used in all areas of industry and trade for cost-effective cleaning of a wide variety of items and materials. The parts are cleaned in a process similar to that of a dishwasher. Placed in a wire mesh basket, they are washed from all sides inside the sealed unit using a hot detergent spray. The machine is started after preselecting the desired temperature and washing time. A centrifugal pump circulates the cleaning fluid to the nozzle system, which simultaneously rotates the basket. (Optional: electric motor basket drive) After the cleaning cycle is complete, the machine shuts off automatically. The parts can also be removed earlier; in this case, lifting the lid will automatically switch off the pump. ROTATHERM chamber cleaning systems are available at short notice in various sizes and models, and can be modified on request for specific requirements. Typically, water-based cleaning agents are used, but solvents can also be used in our cleaning machines. Explosion-proof versions are available if required. Technical details EMSA ROTATHERM Mini: ----- Basket diameter: 400 mm Usable height: 180 mm Load capacity: 50 kg Spray pressure without / with filter: 1.5 / 2.3 bar Circulation volume: 2.5 m³/h Tank capacity: 35 l Heating power: 2 kW Connected load: 2.5 kW Voltage: 220/230 V Frequency: 50 Hz Dimensions ----- Depth: 530 mm Width: 650 mm Height: 630 mm Weight: 48 kg ----- Base unit price in the above configuration: On request ----- Accessories: ----- Order-no: 1.521 Lid extension / max. tool length 310 mm Order-no: 1.522 Tool holder HSK 63 F for exchange with basket Cjdpfx Agjyrtytersgu Order-no: 1.523 Tool holder HSK 63 E for exchange with basket Order-no: 1.524 Tool holder for Weinig Powermat for exchange with basket Order-no: 2.006 Small parts basket Order-no: 1.504 Filtering unit (0.08m²) Order-no: 1.510 Pressure gauge Order-no: 1.511 Electric motor-driven basket drive Order-no: 1.512 Mobile chassis Order-no: 1.513 Rollers Order-no: 1.514 Extraction unit Order-no: 1.516 Oil separator / belt skimmer Order-no: 1.518 Complete unit in stainless steel Order-no: 1.519 Nozzles in stainless steel ----- Prices: On request The ROTATHERM tool cleaning machine is also available in larger designs: Standard, Maxi, and XL. All units are available in special voltages. Surcharge on request. When ordering accessories, the technical specifications and possibly the delivery time may change! The stated values are reference values. Subject to technical changes. Delivery: Short lead times and by arrangement. All prices ex works plus packaging, shipping, insurance, and statutory VAT. (Technical data according to the manufacturer - subject to change without notice!)

Rok výroby: 2018, stav: veľmi dobrý (použitý), Spoločnosť Metals Minerals Sp. z o. o. ponúka na predaj zariadenia 3VST 2000 P / INSON na ultrazvukové čistenie vstrekovacích a tlakových foriem, jadrových skriniek, vložiek a dielov. Kompletný systém ultrazvukového čistiaceho zariadenia pozostáva z: troch nádrží, odlučovača oleja, záchytnej vane, platformy so schodmi a koša s policami na čistenie drobných dielov a príslušenstva. Výrobcom zariadenia je spoločnosť FISA, popredný výrobca zariadení na ultrazvukové čistenie tlakových a vstrekovacích foriem, jadrových skriniek, vložiek a dielov. Zariadenie je možné po dohode obhliadnuť v meste Końskie. Cjdeirfb Nopfx Agrsgu

Stav: nový, Rok výroby: 2017, Plynový plameňový úpravný systém Arcotec FTS 4005 DR som, rok výroby KW42/2017, stroj je nový a nepoužívaný, má označenie CE, prevádzkové napätie 400 V, výkon 7 kW, prednastavený plyn Propán, môže byť použitý aj zemný plyn, horáky 4 x MB3-500S/2E, spracovateľný materiál: kovové plechy. Plynový plameňový úpravný systém je určený výhradne na tepelnú predúpravu povrchu kovových plechov za účelom zlepšenia priľnavosti tlačiarenských farieb, lakov, lepidiel, peny atď. Stroj stál viac ako 200 000 €! Cjdpfx Aged Rik Asrsgu

Stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Dražba zváracej a čistiacej linky, pozostávajúcej z URBAN AKS 1610 + URBAN SV 530! Stroj bol repasovaný v roku 2024! TECHNICKÉ DETAILY Rohová zváracia linka URBAN AKS 1610 Zvárací uhol: 30° - 180° Zvar: vysoko kvalitný, presný a rovnomerný Cgedpfx Agoy Szbtorou Ovládanie: PLC riadenie Vlastnosti: pneumatické upínanie, robustná konštrukcia Automatické zariadenie na čistenie rohov URBAN SV 530 Funkcia: Automatické čistenie rohov Čistiace nástroje: frézovacie a nožové nástroje Vlastnosti: nastaviteľné parametre čistenia Prevádzkové napätie: 230/400 V L1, L2, L3, N, PE Výkon: 3,5 kW Prúd: 6 A Istenie: 3 x 10 A Ovládacie napätie: 24 V DC

Rok výroby: 1995, stav: pripravené na použitie (použité), Funkcionalita: plne funkčný, Žiadna minimálna cena – zaručený predaj najvyššej ponuke! DETAILY STROJA Prevádzkové napätie: 3x 400 V AC Cedpfx Agszaqtyerogu VYBAVENIE Pojazdný ťažký základový rám Masívne prizmatické upínacie miesta Lineárne vedenia Množstvo upínacích a polohovacích bodov Externá referencia: 768

Stav: veľmi dobrý (použitý), Rok výroby: 2008, Funkcionalita: plne funkčný, Kompletná inštalácia chladiaceho systému na báze amoniaku: Typ: Piestový chladiaci systém Kolbenverdichterkalteanlage V1 412 E a VF 612 E Rok výroby: 2008 Cjdpfx Ajxg Ruiegrsgu Chladiaci výkon: 760 kW Chladivo: amoniak NH3/ R717 Povolené prevádzkové tlaky: nízkotlaková strana -1/12 bar, vysokotlaková strana -1/17 bar Chladiaca inštalácia pozostáva z: 2 piestových chladiacich kompresorov GEA Grasso, typ: (1x) Grasso 612E package, (1x) Grasso 412E package, tlaková nádoba EM Polar, typ: DM1600; výparníkový kondenzátor Kühlturm GmbH, typ: KIV 2/12-28-12, 2; rozvádzače a riadiaca skriňa, 3 palety s ventilmi, doplnkové náhradné diely - Grasso 612E package: 1 kus piestový kompresor Grasso/GEA typ 612E Elektromotor Leroy Somer 200 kW /1468 ot./min Rozmery: 3200 mm x 1900 mm x 2150 mm Chladiaci výkon 418,5 kW pri -10ºC/+40ºC Rok výroby: 2008 - Grasso 412E package: 1 kus piestový kompresor Grasso/GEA typ 412E Elektromotor Leroy Somer 132 kW /1468 ot./min Rozmery: 3200 mm x 1900 mm x 2150 mm Chladiaci výkon 325 kW pri -10ºC/+40ºC Rok výroby: 2008 - Tlaková nádoba EM Polar: 1 kus tlaková nádoba EM Polar, typ: DM1600 kapacita: 9580 litrov rozmery: 5200 mm x 1650 mm x 1900 mm Hmotnosť prázdnej nádoby: 2400 kg Rok výroby: 2008 - Výparníkový kondenzátor Kühlturm GmbH: 1 kus výparníkový kondenzátor Kühlturm GmbH, typ: KIV 2/12-28-12, 2 rozmery (2 časti): 6900 mm x 2500 mm x 2500 mm a 3200 mm x 2500 mm x 2150 mm Chladiaci výkon: 1098 kW Rok výroby: 2008 Ďalšie informácie na požiadanie.

Stav: použitý, IL 2 ovládanie pre ILSA Multimatic Cgsdpfx Agey Uv Uasrju

Stav: dobrý (použitý), Funkcionalita: plne funkčný, vstupné napätie: 400 V, vstupná frekvencia: 50 Hz, Certifikované DGUV do: 07/2027, typ vstupného prúdu: trojfázový, Stroj na čistenie plechov Jeros 5015/828 Pre plechy s dvoma okrajmi Cgjdpfx Aoyaklcegrsu Krátka strana zdvihnutá Nerezové prevedenie S olejovaním Skúšané podľa DGUV V3 iba u nás Napájanie: 400V, 16A CEE zásuvka Použitý stroj Navštívte nás!

Stav: veľmi dobrý (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, * Technicky bezchybný stav, pripravený na prevádzku po kompletnej servisnej prehliadke * 2 pneumatické motory (horný a dolný) * Priemer pílového kotúča: 250 mm * 2 CNC riadené osi Cgodpfxoxz Ayys Agrju * Maximálna výška obrábania: 140 mm * Systém rozpoznávania profilov * 2 drážkovacie nože (hore a dole) + ďalšie nástroje * Podporný stôl

Stav: použitý, Rok výroby: 2011, Funkcionalita: plne funkčný, * Technicky bezchybný stav, pripravené na prevádzku po kompletne vykonanej generálnej údržbe * Automatická otočná stanica WT 535B * Priemer kotúčovej frézy: 250 mm * Ovládanie cez PC s Windows * Systém rozpoznávania profilov * Zapínanie a vypínanie nástrojov podľa potreby Csdpeyn Inqofx Agrsgu * Rozsiahla výbava nástrojov

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Cgedpfsfz Dubjx Agreu Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Cedpfx Agefz Apqorogu Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Cgsdpfx Aofz Dt Njgrju Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). Cgsdpfsfz I D Dsx Agreu - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. Codpefz I Edsfx Agrsgu - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. Cedpfx Aoflmdwjgregu In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Cgsdpofzkrnjfx Agreu Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, 7-inch touch panel The large color touch panel makes parameter input even easier and more convenient. 5 programs with 50 steps each It is possible to program up to 5 heating curves, each with a maximum of 50 steps. This feature is particularly useful for complex processes. Cgedofz U Tispfx Agreu Information about gas and oil consumption Oil and gas consumption is calculated based on the burner settings. This function allows you to estimate the consumption and cost of each firing process. USB storage Every firing process is logged, and the data can be transferred to a USB stick for analysis on a PC. Each file is automatically created for a single firing process, recording extreme temperatures and exact timing. Files are saved in *.csv (Excel spreadsheet) format. For all customers until the end of 2016, this feature is free of charge. At other companies, this can cost several thousand euros. Storage of the last 20 firing processes Is something wrong? Did too few items come out of the kiln? Now you can check the exact parameters of the firing process, such as duration or potential issues. New! Timer It is possible to set the start time, allowing the kiln to turn on automatically before the workday begins. Made by professionals for professionals Automatic smoke extraction The smoke extraction system can be programmed to open a few minutes before the end of the firing process to vent smoke from the chamber. The smoke extractor can also be controlled via the touch panel. Process duration timer Using the heating dynamics, the process duration is calculated and the end time of the firing process is displayed. Self-closing doors To open, simply pull the door. To close, just push—it will close automatically. Exhaust hood above the door (optional) To minimize hall heating caused by opening the door, an exhaust hood can be installed above the door to remove hot air. Partition wall (optional) The partition wall is suitable for customers purchasing a large kiln who wish to use only part of the kiln. The oven is equipped with a movable partition wall and dedicated control system. 2 in 1 (optional) It is possible to use both chambers independently. For example, the firing process can run in the first chamber while drying takes place in the second.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. Cgjdpfxofz Nb To Agrju All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Rok výroby: 2020, stav: nový, Transport Systems Transport systems can be designed to move on the floor or be suspended from rails, depending on customer requirements. - For user-friendly solutions in manual installations, we recommend overhead cross transfers (cross conveyors). - In automated systems, chain conveyors are most commonly used; they offer continuous operation, making them an excellent solution for companies focused on process quality and repeatability. - For companies producing different items simultaneously and, for example, operating several booths with various colors, flexible solutions employing non-powered conveyors are implemented. This is the most costly solution. All installations are custom-built to client specifications. Continuous conveyor systems for overhead chains are designed and manufactured to order. In this system, it is also possible to produce ground conveyor systems for positioning items such as flowerpots or rims (see photo). ROMER also manufactures overhead conveyor systems. Cross beams (cross transfers) are designed and manufactured to meet the specific requirements of individual installations. Csdsfz U S Eepfx Agrogu Use of Photoelectric Sensors The use of a photoelectric sensor in the component area allows for length measurement and, consequently, enables automatic activation of the guns when a part enters their range, and immediate deactivation once coating is completed. The photo sensor is standard equipment. Identification of parts can also be performed using special markings. Above the carrier loop, there are plates with identification holes. Based on this, the PLC controller, together with the photo sensor, recognizes the coated part and switches the guns on and off at the correct times—thereby saving energy and powder paint. Vertical shape identification. By using light curtains with horizontal detectors, the PLC controller can analyze the vertical shape of components. The PLC control counts the period in which the part should appear in the gun area—which makes it possible to selectively switch the guns on and off. With light barriers using multiple sensors horizontally and vertically, this solution allows precise measurement of workpiece dimensions, thus enabling the control of manipulators as well.

Stav: veľmi dobrý (použitý), Rok výroby: 2016, Funkcionalita: plne funkčný, vstupné napätie: 400 V, celková dĺžka: 1 100 mm, celková šírka: 1 320 mm, celková výška: 1 050 mm, vstupná frekvencia: 50 Hz, Stroj na čistenie plechov KD-Putz Tubur Premium Cgodpfxoyv U Nfs Agrsu Stroj na čistenie plechov pre pekárenské plechy / dierované plechy krátka strana zdvihnutá Nerezové prevedenie s olejovaním a vozíkom na plechy Prípojka: 400 V, 16A CEE zástrčka Rozmery: 1320 x 1100 x 1050 mm (ŠxHxV) Použitý stroj z pekárne

Rok výroby: 2026, stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: 2026, NOVÉ +++ NOVÉ 3- a 4-hranná čistička plechov NOVÉ +++ NOVÉ Jednočlenná obsluha Prevedenie z nehrdzavejúcej ocele, pojazdné Maximálny rozmer plechu: až 600 x 800 mm Výsuvná zberná nádoba na odpad v spodnej časti Rozmery: 2234 x 630 x 1372 mm (d x š x v) Univerzálnosť čističa táck/plechov sa prejavuje aj tým, že zvládne spracovať aj 4-hranné tácky s výškou okraja až do 24 mm. Nečistoty sa zhromažďujú pod čističom na výsuvnej, ľahko vyprázdniteľnej polici. Zariadenie je plne mobilné a po ukončení práce sa dá jednoducho premiestniť na požadované miesto. Celá konštrukcia je tryskaná guľôčkami pre čo najhladší a najhygienickejší povrch. Cedpfx Agow S Slnorsgu Pripojenie: 400V, 16A-CEE zástrčka Nový stroj S garanciou a servisom náhradných dielov Kvalita od odborného výrobcu! Využite viac ako 35 rokov skúseností! Možnosti: Čistenie plechov do 600 x 1000 mm Mastenie/olejovanie plechov Servisný balík Doručovací servis Zaškolenie a uvedenie do prevádzky Navštívte nás!

Stav: dobrý (použitý), Rok výroby: 2003, Prístroj na čistenie dielov, IBS – použitý - : Cena za kus: 350 € (bez DPH) Výrobca: IBS Scherer GmbH Typ: Typ F2 Rok výroby: 2003 Sériové číslo: 44675 Cgsdox El A Ujpfx Agrsu Elektrické pripojenie: 1/N/PE 230V, 50Hz Menovitý príkon: 18W, 0,2A Nosnosť: 60 kg Šírka: 800 mm Vlastná hmotnosť: 50 kg Objem sudu: 50-litrový sud Materiál rámu: oceľový plech Výška: 1125 mm Typ čistenia: špeciálny čistič Šírka čistiaceho vane: 790 mm Hĺbka čistiaceho vane: 540 mm Stav: dobrý Dostupné: ihneď Miesto: sklad Frankenberg / Sasko

Rok výroby: 2020, prevádzkové hodiny: 50 h, stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, číslo stroja/vozidla: BV200219443, 🔥 Pyrolytická čistiaca jednotka pre šneky – DEMO kus | do Ø70 mm | Plne automatická | 12 mesiacov záruka Efektívne a bezpečné riešenie na odstraňovanie zvyškov polymérov zo šnekov používaných v extrúzii a vstrekovaní plastov – bez deformácie, bez potreby ručného čistenia. Kompletná výroba v Európskej únii. _____ Hlavné vlastnosti • Vhodné pre všetky termoplastické materiály • Max. priemer šneku: Ø70 mm • Vertikálny proces – žiadna deformácia šneku • Plne automatická prevádzka (bez potreby obsluhy) • Doba čistenia: 3–8 hodín (v závislosti od znečistenia) • Procesná teplota: 400–500 °C • Integrovaný systém úpravy plynu s vodnou nádržou a čerpadlom _____ Cgodpfx Agsy Id Tqorju Technické údaje (typ PC-70) • Max. priemer šneku: 70 mm • Max. dĺžka šneku: 2 450 mm • Max. pracovná výška: 3 200 mm • Celkový príkonný výkon: 25 kW _____ Stav • DEMO jednotka – priamo od výrobcu • Výborný stav, plná 12-mesačná záruka od výrobcu • Okamžitá dostupnosť FCA BOCO cena: 27 990,- EUR bez DPH _____ Výrobca BOCO Pardubice Machines, s.r.o. (Česká republika) Viac ako 30 rokov skúseností v technológiách spracovania plastov