Berger kúpiť použité (327)

Stav: veľmi dobrý (použitý), Rok výroby: 1978, Stroj je možné si prezrieť v prevádzke pod napätím. Gsdjwz Emlspfx Agujkc

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling range: 360° Grinding spindle head swivelling range: 180° +/- Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ±6° Gkjdpsd Ih Dvefx Aguec Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (chucked): 130 kg incl. clamping fixture Internal spindle fit: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a world-leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but also offer comprehensive service for your machines. Geometrically overhauled and newly painted, with original electrics but new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display in two axes. X-axis resolution 0.5µm Available options at extra charge: - Upper table swivel angle display - Encoder with digital display in the workhead - Encoder with digital display in the grinding spindle head (no vertical adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to a maximum of 225 mm Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently meet the essential safety and protection requirements as specified in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum safety requirements.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – overhung: 130 kg incl. clamping Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show a similar 1,000 mm machine. Includes: - New electrical cabinet - Modern workpiece headstock from Advance model Gedpfx Ajd Ih Dwsguskc - New workpiece spindle drive - Modern hydraulic unit - Air lift grinding headstock - Modern internal grinding attachment - Operating tools Upper table swivelling extension to 10° Options: - Upper table swivel angle display - Workpiece headstock swivel angle display - Grinding headstock swivel angle display - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Stav: použitý, Inside diameter: 340/440 mm Grinding depth: 99,999 mm Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling range: 360° Grinding spindle head swivelling range: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (overhung): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Gkjdpfx Aod Ih Dxsguec Machine weight approx.: 2.2 t Required floor space: approx. 3.1 × 2.0 m As a world-leading company in Kellenberger overhauls/retrofits, we are not only able to supply machines in as-new condition with warranty, but also provide service for your machines. Warranty: 12 months from delivery (Germany and neighbouring countries). Pure internal grinding machine with steplessly adjustable drive 0–100%. Also available in current color schemes! Standard centre height: 175 mm, increaseable to 225 mm. Fixed internal grinding spindle, belt tension via tension roller! z-axis reversing accuracy max. 1/100 mm! Geometrically overhauled and repainted with: - New control cabinet. - New workpiece spindle motor and controller (three-phase technology). - 2-axis digital readout (x-axis resolution: 0.5 µm). Options: - Encoder with digital display on the workhead - New robust internal grinding attachment 80 mm or 100 mm diameter with height adjustment - Centre height increase up to max. 225 mm Including: - Operating tools Further accessories on request. At this time, the machine tool does not meet the fundamental safety and protection requirements as defined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum level of protection.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling range: 360° Grinding headstock swivelling range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Gedjd Ih D Nspfx Agujkc Maximum workpiece weight (between centres): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirement approx.: 3.1 x 2.0 m As a globally leading company in the field of Kellenberger overhaul/retrofit, we are able not only to deliver machines in as-new condition and with warranty but also to provide comprehensive service for your machines, including full metric overhaul and new paintwork. Version R: The machine features central lubrication and roller guides in the X-axis flat slideway, as well as air lift for the grinding headstock. - Digital readout on 2 axes. X-axis resolution: 0.5 μm Optional extras (available at additional cost): - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment with spindle not possible) - New heavy-duty internal grinding attachment, 80mm or 100mm diameter, with height adjustment - Increase of centre height up to max. 225 mm - Variable speed drive for the grinding spindle Included equipment: - Operating tools - Collet tube for chuck Further accessories available on request. This machine tool currently does not meet the fundamental safety and protection requirements as specified in the BetrSichV 2015 (German Industrial Safety Regulation). The necessary minimum safety objectives must be determined via a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 600 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling range: 360° Grinding headstock swivelling range: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling range: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight, cantilevered: 130 kg incl. clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Godpfxsd Ih D Rj Aguskc Machine weight approx.: 2.2 t Space requirement approx.: 3.1 × 2.0 m Completely overhauled machine according to Kellenberger standards - Workpiece spindle drive upgraded to modern three-phase technology - Digital readout in 2 axes. Resolution on X-axis: 0.5 µm Optional extras at additional cost: - Rotary encoder with digital readout on the workpiece headstock - Rotary encoder with digital readout on the grinding headstock (height adjustment via spindle not possible) - New heavy-duty internal grinding attachment with diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet for chuck Further accessories available on request.

Stav: použitý, Priemer brúsenia 450 mm Dĺžka brúsenia 1000 mm Výška hrotov 225 mm Ako svetový líder v oblasti Kellenberger – generálnych opráv/retrofitov, nie sme len schopní dodávať stroje v kvalite nových strojov a so zárukou, ale ponúkame Vám aj servis pre Vaše stroje. Stroj je dodaný po generálnej oprave podľa normy výrobcu. Fotografie už dodaných strojov s dodatočnými možnosťami. Mechanická generálna oprava: -Kompletná generálna oprava stroja podľa meracieho protokolu Kellenberger -Nová, servisne nenáročná kabína -Nové lakovanie Elektrická generálna oprava: -Nové moderné CNC ovládanie pre okružnú brúsku -Úplne nová riadiaca skriňa -Nová pohonná technika -Výmena všetkých elektrických káblov, tlakových spínačov atď. -Nové absolútne sklenené meradlá v osiach X a Z -Nový absolútny rotačný snímač (pre B-os) Fotografie už dodaného stroja s inými možnosťami. Varianta brúsnej hlavy UR/RS: Gjdpfjuwv Hysx Aguokc - Usporiadanie brúsnych kotúčov pre vonkajšie a šikmé drážkovanie za sebou - Každý kotúč s priemerom 400 mm! - Výrazne nižšie riziko kolízie - Jednoduchšie programovanie - Rozmery brúsnych kotúčov každý 400x63x127 mm - Príprava na použitie HF vretena - Vreteno je voliteľné za príplatok - Osa B CNC riadená pre vonkajšie, čelné a vnútorné brúsenie v jednom upnutí. Rozsah natočenia +10°/-270° - Osa C pre polygonálne brúsenie – voliteľná za príplatok - Spodná časť pevná - Motor brúsnej hlavy 10,0 kW - Koník - Merací systém Marposs na meranie brúsnych kotúčov - Pozdĺžne polohovanie Marposs

Stav: použitý, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in the field of Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA grinding software - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B axis) Standard Equipment: - Workheadstock with Morse taper MK5, optional MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measurement system for grinding wheel measurement - Longitudinal positioning Marposs - GAP control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at additional cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece headstock - Measurement control - Extraction unit Gksdpfxeuwv H To Agujc - Paper band filter Control: Basic grinding cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Infeed sensor GAP - Dressing diamond measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 500 mm Overhauled according to Kellenberger guidelines, including a new, modern and future-proof control system. New servo motors for the X-axis and for the workpiece spindle head. The photo shows a previously delivered machine in the UR specification. - Operation via touch panel is extremely user-friendly. - The symbolism on the control panel is virtually identical to the original control, so no additional familiarisation is required. - Diagnostic function with PLC message display and digital I/O - Dressing function can be extended or modified as per customer requirements. - Workpiece spindle can be equipped with oriented stop on request. - New maximum infeed rate: 40 mm, can be further increased upon request. - Digital readout on 2 axes. X-axis resolution: 0.5 μm. Options: - Encoder with digital display on the workpiece spindle head - Encoder with digital display on the grinding spindle head (no spindle height adjustment possible) - New, robust internal grinding device, ø 80 mm or 100 mm, with height adjustment - Increase centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system in the X-axis, driven by stepper motor. Hydraulic table longitudinal and rapid traverse movement. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup on individual parts. Available options: - Semi-automatic dressing cycles for external and internal grinding Gsdpfsuwv Idjx Aguekc - Automatic dressing compensation - Measurement control Please note: At the current time, this machine does not meet the fundamental safety and protection requirements set out in the German Industrial Safety Regulation (BetrSichV 2015). Determination of the required minimum protection targets must be carried out via a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (incremental): 0–9.99 mm / diameter Infeed (continuous): 0–9.99 mm / diameter Table swivelling: ±10° Table longitudinal traverse: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mounting: 80 mm Tailstock quill mounting: MT3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a machine already delivered with 1000 mm centre distance. - Operation via touch panel is extremely user-friendly. - Symbols on the control panel are almost identical to the original control system, so no additional training is required. - Diagnostic function with display of PLC information and digital I/O - Dressing function can be expanded or modified to customer requirements. - Optional orientated spindle stop on the workpiece spindle available. - New maximum infeed amount of 40 mm, optionally expandable. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80 mm or 100 mm - Increase centre height up to max. 225 mm Gjdpfx Agouxft Ejuokc - Speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control Currently, the machine tool does not meet the basic safety and protection requirements as stated in the BetrSichV 2015. A determination of the required minimum protection level must be established through a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table movement: 1,300 mm Table feed rate: 0.02–6 m/min Godpfsd Ih D Hox Agujkc Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows similar machine with 225 mm centre height Version R: Machine equipped with central lubrication and roller guideway in the X-axis flat guide, as well as air lift in the grinding headstock. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on workpiece headstock - Rotary encoder with digital readout on grinding headstock (height adjustment by spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Variable speed control for grinding spindle Includes: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine tool currently does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). A risk assessment pursuant to BetrSichV is required to determine whether the minimum safety objectives can be increased accordingly.

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swivelling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. chucking Max. cross travel: 270 mm Internal spindle mount: 80 mm Tailstock sleeve taper: MK3 Sleeve travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space required approx.: 4 x 2 m Overhauled to Kellenberger standards Including new, modern, and future-proof CNC control system. Photo shows a previously delivered machine with special options. - Operation via touch panel is exceptionally user-friendly. - The symbols on the control panel are practically identical to the original controls, eliminating the need for retraining. - Diagnostic function with PLC status and digital I/O display. - Dressing function can be expanded or modified upon customer request. - Workpiece spindle stop in angular position available on request. - New maximum infeed amount 40 mm, can be further increased on request. - Digital position display in 2 axes. Resolution X-axis 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (height adjustment with the spindle not possible) - New sturdy internal grinding attachment, diameter 80 mm or 100 mm - Increase of centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application possibilities in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control This machine tool does not currently meet the essential safety and protection requirements as defined in the BetrSichV 2015 workplace safety regulation. Gedeuxftrjpfx Agujkc The required minimum protection level must be determined through a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor, water-cooled, 9.8 kW - Marposs tool measuring system - Active longitudinal positioning - Kel-Set - GAP sensor (contactless by ELASO) at T1 and T2, integrated in the control interface - GAP at T3/T4 via fluid sensor - Semi-automatic balancing by ELASO for T1/T2, integrated into the control interface - Tailstock hydraulic, with fine adjustment +/-150 μm - Dressing device on the lower table, workpiece spindle side - Dressing device on the lower table, tailstock side - Dressing device on the upper table - New, service-friendly and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle headstock with direct drive *Strongly recommended for non-circular grinding *Workpiece weight (chucked): max. 75 kg *Workpiece weight (between centres): 150 kg *Water-cooled *MK5 combined with short taper mounting DIN 55026 *Oriented spindle stop *Fixed lower part B-axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL RETROFIT: - Complete overhaul according to Kellenberger measuring protocol - Newly painted Hydraulics unit new: Godpfxeuxfu Nj Aguekc - Improved temperature control (oil cooler) - Energy saving: only one pump, not running continuously - Pressure monitoring - Monitoring of water content in hydrostatic oil (Early detection of bellows damage) Hydrostatic leadscrew in X: - Wear-free due to no contact during operation - No loss of accuracy, even under continuous full load at max. speed - Frictionless at low speeds - No stick-slip effect at low speeds - Precisely transmits even the smallest rotational movements - No backlash in case of change in rotational direction - No fluctuation in friction torque due to ball circulation - Higher axial rigidity than ball screws - Significantly better damping, leading to improved surface finish and tool life - No vibrations from ball return - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor, higher accuracy, significantly lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling capacity needed compared to linear motors ELECTRICAL RETROFIT: - New, modern CNC CYLINDRICAL GRINDING MACHINE controller with BEMA grinding interface - Completely new electrical cabinet - New drive technology - Replacement of all wiring, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) CONTROL SYSTEM: The grinding software consists of a base license and various options available depending on the machine's configuration. Software base: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Stav: použitý, Priemer brúsenia 350 mm Dĺžka brúsenia 1000 mm Výška hrotov 175 mm Potrebný priestor cca 3,6/3,5 m Ako celosvetovo vedúca spoločnosť v oblasti generálnych opráv/retrofitov Kellenberger zabezpečujeme nielen dodávky strojov v kvalite nového stroja so zárukou, ale ponúkame aj servis pre Vaše stroje: Rad Kellenberger Kel-Varia so systémom riadenia Kelco 90. Mechanická generálna oprava: - Kompletná generálna oprava stroja podľa testovacieho protokolu Kellenberger - Nová servisne priateľská kabína - Nové lakovanie Elektrická generálna oprava: - Nové, moderné CNC ovládanie brúsok na guľato s rozhraním BEMA - Nový rozvádzač Gkodjuwv H Hepfx Agujc - Nová pohonná technika - Výmena všetkých elektrických vedení, tlakových spínačov Berus atď. - Nové absolútne sklenené odmeriavacie pravítka v osiach X a Z - Nový absolútny rotačný snímač (pre B-os) Štandardná výbava: - Pevný koník s kužeľom MK5, voliteľne s adaptérom MK5/krátky kužeľ - Otočný koník s kužeľom MK4, voliteľne s jemným nastavením - Brúsne vretená T1/T2/T3 - T1 - priemer brúsneho kotúča 400 mm - T2 - priemer brúsneho kotúča 300 mm - T3 - zariadenie na vnútorné brúsenie, pohon cez brúsny motor remenom - Brúsny motor 4,4 kW - B-os s vysokým rozlíšením - Merací systém Marposs pre meranie brúsnych kotúčov - Pozdĺžne polohovanie Marposs - GAP Control (senzor na brúsnom vretene) ELASO integrované do systému riadenia - Polautomatické vyvažovanie ELASO integrované do systému riadenia - BEMAT meranie brúsnych kotúčov Voliteľná výbava za príplatok: - Vysokofrekvenčné vnútorné brúsne vreteno - Vysoko presný, maximálne tuhostný vreteník obrobku - Merací riadiaci systém - Odsávanie - Pásový papierový filter Ovládanie: Základné brúsne cykly: - Nulovanie obrobku s pozíciou Z (pozdĺžne polohovanie) - Meranie brúsneho kotúča s BEMAT - Senzor priblíženia GAP - Meranie diamantov na orovnávanie - Korekcie - Vonkajšie a vnútorné valcové brúsenie (kyvné a priečne brúsenie) - Vonkajšie a vnútorné kužeľové brúsenie (naklápanie B-osy, orovnávanie s rovným kotúčom) - Vonkajšie a vnútorné rádiusové brúsenie (rádius orovnaný na kotúči) Voliteľné brúsne cykly: - Profilové priečne brúsenie vonkajšie a vnútorné s profilovým kotúčom - Profilové brúsenie vonkajšie a vnútorné s rovným kotúčom - Jedno a viacchodové vonkajšie a vnútorné závitové brúsenie s voľne voliteľným uhlom bokov - Brúsenie trapézových závitov - Neokrúhle/brúsenie mimo osy vonkajšie a vnútorné Cena 15 000 €

Stav: použitý, Rok výroby: 2005, Grinding diameter 500 mm Grinding length 1500 mm Centre height 250 mm Control system: GRINDplusIT Machine will be partially overhauled with measurement protocol and warranty Delivery within Germany and neighbouring countries. 1 x UR-RS 175 / 1500 Standard version (T1, T2, T5, T7) 1 x Grinding wheel assembly T1 400x63x127mm 1 x Grinding wheel assembly T2 400x63x127mm 1 x Grinding wheel assembly T5 400x63x127mm 1 x Internal grinding device T7 0120 mm for HF spindles 1 x Centre height 250 mm 2 x Grinding head motor: drive power 10.0 kW 1 x CNC control Heidenhain GRINDplusIT 1 x Kel-ASSIST 100 PLUS (includes Kel-Assist 100 and thread calculation) 1 x KEL-POLY, non-circular grinding 1 x KEL-NET for CNC control GRINDplusIT 1 x B-AXIS GRINDplusIT: CNC-controlled B-axis (standard) 1 x GRINDplusIT: v constant 35m/s or 45m/s_Adjustment of grinding spindle via control 1 x T1, T2, T5, T7: T1 and T2: v=constant, T5: v=variable (Danfoss), T7: HF spindle 1 x Operating unit for 1x MFM or MFV spindle, VACON 22 kW 1 x HF internal grinding spindle Fischer MFM 1224/42/31 right, HJND 21 1 x HF internal grinding spindle Fischer MFV 1260/4 right 1 x HF internal grinding spindle IBAG HF 33 S 60 P 1 x Tailstock with manual retraction 1 x MICRO ADJUSTMENT: Tailstock lower part with micro adjustment 1 x Spring-loaded quill insert 1 x Pneumatic relief for tailstock 1 x Upper table flooding (standard) 1 x Workpiece headstock reinforced, MK 5 DIN 55026 size 5" 1 x C-AXIS: CNC-controlled C-axis for reinforced workpiece headstock 1 x Fixed base for reinforced workpiece headstock 1 x KELPOS: Active longitudinal positioning MOVOMATIC, mounted on grinding head 1 x Diameter probe Movomatic; DU200 1 x Measurement control unit Movomatic ES124 / digital 1 x KELSET: Tool measurement system KELSET, MARPOSS 1 x Basic module for KEL-TOUCH infeed sensor and KEL-BALANCE balancing system Gedpfx Agewulrhjuekc 1 x KEL-TOUCH, infeed sensor for diagonal/tandem 1 x Full enclosure for emulsion 1 x Coolant cleaning pistol connected to the table 1 x Grinding mist extraction system for emulsion 1 x Lubricant for first fill HF dressing device type IBAG on OT Data refer to delivery condition without guarantee.

Stav: použitý, Grinding diameter: 350, 450 mm Grinding length: 600 mm Centre height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20-400 rpm Workpiece headstock swivels: 360° Grinding head swivels: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001-0.030 mm/Ø Continuous infeed: 0-0.95 mm/Ø Table swivels: ±10° Table longitudinal travel: 900 mm Table speed: 0.02-6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (flying): 130 kg including chucking system Internal spindle bore: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Required space approx.: 3.1 x 2.0 m Gedpfsd Ih D Eex Aguskc As a global leader in Kellenberger overhauls and retrofits, we are not only able to deliver machines in like-new condition with warranty, but also offer overhaul and repainting services for your machines in metric execution. Photo shows a previously delivered machine, possibly with different options. The machine is equipped as standard with central lubrication and roller guideways in the flat bed of the X-axis, as well as air lift-off in the grinding headstock. BEMA standard equipment includes: - Digital read-out in 2 axes. X-axis resolution: 0.5 µm - Spindle speed display for grinding spindle - Infinitely variable speed control for grinding spindle (70-100%) - Infinitely variable speed control for internal grinding spindle (70-100%) - Workpiece spindle drive by three-phase motor, continuously variable via frequency converter Optional extras (at additional cost): - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding headstock (no height adjustment possible with spindle) - Sine bar - New robust internal grinding attachment (80 mm or 100 mm diameter), with height adjustment - Increase in centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Of course, all of our completely refurbished machines come with a 12-month warranty (valid only in neighbouring countries). Further accessories available on request. Please note: At present, the machine tool does not meet the fundamental safety and protection requirements as described in the BetrSichV 2015. The increase of the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 250 mm Grinding length: 1000 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece spindle head swivels: +/- 360° Grinding spindle head swivels: +/- 0° Incremental infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Gsded Ih Egepfx Agujkc Table swivels: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (between centres, including clamping): 130 kg Cross traverse: 270 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total connected load: 5.5–7.5 kW Machine weight approx.: 2.7 t As the worldwide market leader in Kellenberger overhaul / retrofit, we are not only able to deliver machines in like-new condition with warranty, but also offer service for your machines. Geometrically overhauled and newly painted according to Kellenberger measuring protocol. Completely new electrical system with new infeed control. Photos show a previously delivered machine of the same design, but with 1500 mm centre distance and a universal grinding head instead of a head with 500 mm wheel, intended for external cylindrical grinding only. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at surcharge: - Semi-automatic dressing - Dressing size compensation - GAP control - Measurement automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table traverse and rapid traverse. Powerful, non-swivelling grinding spindle head for production external cylindrical grinding. Applications: Machining of high-precision components in the gearbox, machine tool, and general mechanical engineering industries. Mating/grinding pairs for the hydraulics industry. At present, the machine tool does not conform to the fundamental safety and protection requirements as specified in the 2015 German Industrial Safety Regulation (BetrSichV). The necessary minimum safety target must be determined by a risk assessment according to BetrSichV.

Stav: použitý, Grinding diameter 250, 350, 450 mm Grinding length 1000 mm Center height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swiveling 360° Grinding spindle head swiveling 180 + - ° Grinding spindle speed 1500, 1700, 2200 rpm Plunge (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Table swiveling ±8° Table longitudinal travel 1300 mm Table speed 0.02–6 m/min Workpiece weight between centers 130 kg Workpiece weight max. (overhung) 130 kg incl. clamping equipment Internal spindle mount 70 mm Total power requirement 6.5 kW Machine weight approx. 2.5 t Space requirement approx. 4.2 x 2.0 m As the world's leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition and with warranty, but can also provide service for your machines—recently delivered equipment supplemented with additional options such as: - Splash guard doors - X-axis enclosure Gkedpfxjuxftxj Agusc - Grinding spindle head swivel angle indicator Available at a surcharge. Geometrically overhauled and newly painted with original electrics. The machine is equipped as standard with central lubrication and roller guide in the X-axis flat slideway as well as air lift-off in the grinding spindle head. - Digital display in 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display for the workpiece spindle head - Rotary encoder with digital display for the grinding spindle head (no height adjustment with spindle possible) - New heavy-duty internal grinding unit, diameter 80 mm or 100 mm, with height adjustment - Increase in center height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine tool does not currently meet the fundamental safety and protection requirements specified in BetrSichV 2015. Raising the required minimum protection level must be established by means of a risk assessment in accordance with BetrSichV.

Stav: použitý, Grinding diameter: 350 mm Gedpfx Ajt Ii Rrsgujkc Grinding length: 1500 mm Centre height: 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! Internal grinding spindle can only be switched on when in position A quantum leap in terms of safety - Infinitely variable grinding spindle speed: 1000-1500 rpm - Infinitely variable internal grinding spindle speed: 0-100% - Digital display of spindle speeds - Swivel angle indicator for upper table - Swivel angle indicator for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine is already delivered. Identical machine can be built with additional options. The machine tool currently does not comply with the essential health and safety requirements as stipulated in the BetrSichV 2015 regulations. The achievement of the required minimum safety standards must be determined by means of a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine has been overhauled according to Kellenberger test protocol and freshly repainted. The susceptible Güttinger control system has been replaced by the modern BEMA X control system. This means the machine also received a completely new electrical system as part of the upgrade. Gkodpfjvq R Uzsx Agujc Machine equipped with reinforced workpiece spindle stock for plunge grinding of heavy workpieces. The machine does not currently comply with the essential safety and protection requirements as specified in the BetrSichV 2015. Raising the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 1982, Brúsny priemer 630 mm Gjdpev Dxxzsfx Aguokc Brúsna dĺžka 600 mm Výška hrotu 320 mm Stroj so zosilneným vretenníkom na obrobky na vyložené brúsenie ťažkých obrobkov. Stroj prechádza veľkou údržbou/čiastočnou generálnou opravou vrátane geometrického protokolu podľa smerníc pre nové stroje Kellenberger. Obrábací stroj v súčasnosti nespĺňa základné požiadavky na bezpečnosť a ochranu, ako je uvedené v BetrSichV 2015. Stanovenie požadovaného minimálneho cieľa ochrany sa určuje prostredníctvom posúdenia rizika podľa BetrSichV.

Stav: použitý, Rok výroby: 2010, Brúsny priemer: 350 mm Brúsna dĺžka: 1000 mm Výška hrotu: 175 mm Riadenie: Fanuc 310is Kompletne mechanicky repasovaný. Vrátane brúsneho procesu a nastavenia na jeden kus. Originálna fotografia stroja z výstavy EMO 2010. CNC riadenie GE Fanuc 310is Ručný panel pre CNC riadenie GE Fanuc S Wenger podávačom Otočný diel s automatickým indexovaním po 1° Brúsna hlava UR 1-2-3 Brúsny kotúč vľavo 500 x 80 mm Brúsny kotúč vpravo 400 x 63 mm Prevádzková jednotka pre vysokofrekvenčné vnútorné brúsne vreteno MFV / MFZ Vysokofrekvenčné vnútorné brúsne vreteno MFN 1090 Chladenie cez vreteno obrobku Zariadenie na orovnanie na hornom stole Otočný držiak pre PKD diamantové platne Základný modul pre KEL-TOUCH snímač kontaktu nástroja a KEL-BALANCE vyvažovaciu jednotku KEL-TOUCH snímač pre univerzálne varianty brúsnej hlavy R / RS / UR / URS KEL-TOUCH na hlavnom vretene pre vnútorné a vonkajšie brúsenie Príprava pre meracie ústrojenstvá Movomatic ESZ 400 alebo Marposs P7 ME Príprava pre externý filter Vypínanie chladiva pre stolové zariadenia Plné opláštenie pre emulziu Odsávacie zariadenie na brúsny hmlový emulzia Servisná jednotka pre pneumatické prídavné funkcie Príprava pre nakladač portálu KEL-VITA Gkodpfx Agjvdk N Eoujc KEL-POS, MOVOMATIC: Merací snímač C25 Hydraulická príprava pre lunetu Arobo

Stav: použitý, Brúsny priemer 250, 350, 450 mm Brúsna dĺžka 1000 mm Výška hrotu 125, 175, 225 mm Priemer brúsneho kotúča 400 mm Šírka brúsneho kotúča 50 mm Otvor (upnutie kotúča) 127 mm Kužel vretien na obrobok MK5 Gkodjv I Eq Sjpfx Aguoc Otáčky vretena na obrobok 20-400 min⁻¹ Vreteno na obrobok otočné 360° Brúsny vreteník otočný 180° ± Otáčky brúsneho vretena 1500, 1700, 2200 min⁻¹ Prísuv (prerušovaný) 0,001-0,030 mm/Ø Prísuv (spojitý) 0-0,95 mm/Ø Stôl otočný ±8° Pozdĺžny pohyb stola 1300 mm Rýchlosť stola 0,02-6 m/min Hmotnosť obrobku medzi hrotmi 130 kg Max. hmotnosť obrobku na konzolu 130 kg vrátane upnutia Vnútorný otvor vretena 70 mm Celkový príkon 6,5 kW Hmotnosť stroja cca 2,5 t Pôdorys cca 4,2 x 2,0 m Okamžite k dodaniu, samozrejme s 12-mesačnou zárukou! Geometricky repasovaný a novo lakovaný s novou elektroinštaláciou. V KELLENBERGER kvalite! - Digitálny odpočet v 2 osiach. Rozlíšenie os X 0,5 µm - Moderný vretenník na obrobok s kužeľom MK5 - Moderný koník s kužeľom MK3 - Moderná hydraulická jednotka - Papierový pásový filter Ďalšie príslušenstvo na požiadanie Stroj v súčasnosti nespĺňa základné bezpečnostné a ochranné požiadavky uvedené v BetrSichV 2015. Určenie požadovaného minimálneho bezpečnostného cieľa je potrebné stanoviť posúdením rizík podľa BetrSichV.

Stav: použitý, Rok výroby: 1978, Grinding diameter: 500 mm Grinding length: 500 mm Centre height: 250 mm The URF model is designed for both single-part and series production of high-precision workpieces mounted in a chuck, on a faceplate, or on a magnetic chuck, with a maximum load capacity of 330 Nm including clamping equipment. This machine type is characterized by its compact and robust design, ease of operation, and high versatility, as well as short setup times for external, face, and internal grinding operations. Applications: - Toolmaking - Mold making - Gauge making Godpfx Aovx Dvnoguekc External grinding wheel diameter: 400 mm Face grinding wheel diameter: 225 mm Internal grinding attachment for spindle diameter: 70 mm (80 mm available on request) The machine has been completely overhauled: - New control cabinet - Modern hydraulic unit - Reinforced workpiece spindle stock (see photo) - 2-axis digital readout (Fagor) - Sine bar for precise adjustment of the swivel angle Photos show the current refurbishment status. Delivery time approx. 3 weeks from order.

Stav: použitý, Rok výroby: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos show an identical machine with a centre height of 225 mm Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard Equipment: - T1 500 mm grinding wheel diameter - T2 400 mm grinding wheel diameter - B-axis infinitely variable, high-resolution - Marposs measuring device for tool measurement - Active longitudinal positioning - GAP monitoring for T1 and T2 from ELASO, contactless, integrated in the control interface - Semi-automatic balancing from ELASO integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mounting DIN 55026 - Internal grinding device, belt-driven Options at extra charge: - New high-precision workpiece spindle head with torque drive - Internal grinding device for high-frequency spindles, diameter 120 mm - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm, with integrated GAP sensor (delivery time required) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic ballscrew on X-axis - New hydrostatic system with only one pump and accumulator for improved energy efficiency - Monitoring of the water content in the hydrostatic system - Extraction unit Other options available on request Mechanical Overhaul: - Complete overhaul of the machine according to Kellenberger measurement protocol - New, service-friendly machine enclosure - New paintwork Electrical Overhaul: - New, modern CNC CYLINDRICAL GRINDING MACHINE control system with BEMA cylindrical grinding interface - Newly built switch cabinet - New drive technology - Replacement of all electrical cables, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) Control System: The grinding software consists of a basic license and various options depending on the machine’s configuration. Software Basic - External and internal longitudinal grinding - External and internal plunge grinding - External and internal face longitudinal grinding - External and internal face plunge grinding - External and internal taper longitudinal grinding - External and internal radius grinding, radius dressed onto the wheel - Semi-automatic longitudinal grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measuring (probe required) - GAP measurement (pre-grinding device required) OPTIONS at extra charge: Software Profile Plunge Grinding: - External and internal profile plunge grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single and multi-start external and internal thread grinding with thread dressed onto the wheel. Dressing of single and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: Godpsuxfucjfx Aguekc - External and internal non-circular longitudinal grinding Software Non-circular Grinding: For non-circular grinding, the workpiece axis must be equipped with a high-resolution encoder in order to operate the axis as a C-axis. The non-circula