Cnc Obrábacie Centrum kúpiť použité (35 004)

Stav: použitý, CNC vertical machining center HURCO type BMC 25/M Serial No.: ZB9-001-052 Year approx. 1995 Travel X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface): 845 x 400 mm Table size (with coolant groove): 1050 x 500 mm Spindle taper: ISO 40 (SK 40) Distance spindle nose to table: 155 – 710 mm Table load max.: 500 kg Overhang: 420 mm Spindle speed max.: 10,000 rpm Feed rate: 3 to 5,080 mm/min Rapid traverse: 10 m/min Dedpfew Nklhox Afmsul Spindle drive: approx. 5.5 kW Power supply: 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screws - Tool changer with 20 positions - Full enclosure with sliding door - Swiveling control panel - Spindle drives by Yaskawa (Japan) - Pneumatic mechanical tool clamp - Without coolant unit – pump present, coolant tray missing Machine width: 2,400 mm Transport dimensions (L x W x H): 3,000 x 2,400 x 2,650 mm Weight: 4,200 kg In good condition

Stav: použitý, číslo stroja/vozidla: 008338, Pracovný rozsah os X: 4600 mm Pracovný rozsah os Y: 1935 mm Dodpfx Ajx A Tkxjfmsul Pracovná plocha: S vákuovými konzolovými podperami Výkon hlavného vretena: 15 kW Počet riadených osí: 5 osí Počet vrtacích vretien: 31 Počet pozícií pre nástroje: 37

Stav: dobrý (použitý), Rok výroby: 2012, Ručne zobrazené diely nie sú súčasťou dodávky. 12 000 ot./min, 25 kW, 160 Nm. Riadiaca jednotka: HEIDENHAIN iTNC 530. 4. os je dodávaná bez ručne zobrazených dielov. Dsdpfx Asx Awzbsfmoul

Stav: dobrý (použitý), Rok výroby: 2004, Predám trojosé CNC obrábacie centrum HOLZ-HER UNI-MASTER 7226 s traversovým stolom, rok výroby 2004. Djdpfx Aji U Dxuefmsul Konfigurácia: - Trojosé hlavné vreteno po úplnej generálnej oprave, chladené vodou - Zásobník na nástroje s 6 pozíciami HSK63 na hlave - 1x drážkovacia píla (smer X) - Vŕtacia hlava 16+4 vŕtacích vreten - Využiteľná pracovná plocha 3100 x 1360 mm - 2 pracovné plochy, 4 upínacie zóny - Automatický centrálny mazací systém - Softvér Holzher s prevádzkovým manuálom - Čerpadlo SIEMENS ELMO-L S22, 2,35 kW - Dodatočné vákuum pre šablónové práce alebo pomocné upínacie zariadenia. Stroj je v dobrom stave, okamžite k dispozícii zo skladu.

Stav: veľmi dobrý (použitý), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Dsdswb Allepfx Afmeul Movable horizontal table (workpiece), stationary working head Control system (BiesseWorks software), with separate electrical and control panel Working head safety cabinet, safety tread mats Infeed table (workpiece support) at entry No. 2 workpiece clamping vices in working area Outfeed table (with conveyor belt) Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for machining on X-axis), saw blade diameter mm 160 (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for machining on X-axis), saw blade diameter mm 160 (No. 1 x approx. 3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x approx. 4.5 kW)

Stav: použitý, Rok výroby: 2024, New demonstration machine!! List price: €52,742 net. Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact panel and base frame, with adjustable machine feet. Milling bed as a sacrificial plate in 19 mm MDF. Table openings pre-equipped longitudinally and transversely. Mechanical set consisting of profile guides incl. profile guide carriages, ball screw and precision rack and pinion. All elements mounted, pre-lubricated including trial run, ready for immediate operation. Control set consisting of control cables, cable chains, planetary gears, stepper motors, high-performance end stages, power supply and toroidal transformer, fully preassembled in control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals as dust protection, as well as CE-compliant safety devices through a mobile extraction device and laser scanner mounted on one side for workspace monitoring, with 275° and 5.5 m field extension (machine positioned in a room corner). Handheld control unit equipped with all necessary functions for operating the machine, including emergency stop button and dead man's switch. Tool length sensor for determining tool length and for changing the active zero point offset. High-frequency spindle with 2.2 kW, incl. locknut, frequency converter, line filter, braking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 10, with Beamicon2 control software, plus mouse and keyboard pre-installed in an ergonomic console. CAD license Rhino 7.0 and CAM license Estlcam V11, as well as all necessary documentation, will be sent via email prior to delivery. Dedew Tfy Ujpfx Afmeul Vacuum table: Milling bed constructed as a vacuum table, consisting of four regulated segments. Cross table made of PE with a top plate of uumpumpe from Becker company with a performance of 100 m³/h, oil-lubricated. For the power connection of the vacuum pump, you need a 16-amp 400 V plug for alternating current. The customer must provide HDF 3mm double-sided raw for the whole vacuum table (2500x1300mm) as a sacrificial plate. (Recommended use: machining of coated wood-based materials) Tool set in Systainer: Tool set in Systainer consisting of: 1 pc 1.5mm left (HF152LIVHM), 1 pc 3.175mm 30° (HF30GVHM), 1 pc 6mm 90° (HF90GVHM), 5 pcs 4mm Z2 (HF41REVHM), 1 pc 5mm Z2 (HF52REVHM), 1 pc 5mm Z3 (HF53SRECAR), 2 pcs 5mm Z2 (HF52REDIA), 1 pc 5mm Z2 (HF52UPDOWN), 1 pc 4mm Z3 (HF43REVHM), 1 pc 6mm Z1 (HF61REVHM), 1 pc 8mm Z2 (HF82LAVHM), 1 pc 10mm Z2 (HF10SVHM), 1 pc 12mm Z2 (HF12SVHM) Maintenance package in Systainer: Grease press 150 ml, a cartridge of high-performance grease 400g, spray can of silicone spray grease 500 ml, a grease nipple incl. hose section and 30mm face mill with indexable inserts. Pneumatic unit: consisting of four cylinders, throttle check valve, push-in fittings, angle fittings, muffler connections, filter regulator, push-in distributor, PE tubing, and brackets for use in a pre-equipped table opening (for end-face machining). If the pneumatic unit is required for both table openings, positioning must be calculated twice. (NOTE: Compressor to be supplied by customer) Technical data: Travel (X / Y) 2500 x 1300 mm, Z = 200 mm. Dimensions (L / W) 1980 mm, 3800 x 2300 mm, H = 1900 mm. Installation area: approx. 20 m² (minimum footprint). Weight: 1500 kg. Rated voltage: 400 V. Repeatability: ±0.1 mm. Connection values: 4.3 kW. HF spindle: 2.2 kW. Travel speed: ...

Stav: použitý, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB / 9650234 Year of manufacture: 1996 CNC Path Control: Ultimax 3 Travel (X/Y/Z): 760 mm / 460 mm / 610 mm Table Size (Clamping Surface): 1010 x 400 mm Table Size (with coolant channel): 1120 x 500 mm Spindle Taper: SK 40 Distance Spindle Nose – Table: 150 – 760 mm Overhang: 450 mm Spindle Speed: 80 to 8000 rpm, infinitely variable Feed Rate: 3 to 16,000 mm/min Rapid Traverse: 24 m/min Spindle Drive: 7.5 kW @ 30min / 5.5 kW @ 100% Power Connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g., TFT monitors) - Electronic handwheel - Indirect measuring system with encoders on the ball screw - Tool changer with 24 magazine slots - Full enclosure with sliding door - Swiveling operator panel - Yaskawa spindle drives (Japan) Dodpfjtrhq Hjx Afmeul - Pneumatic-mechanical tool clamping system - Coolant unit adjacent, mounted from behind underneath - Splash tray Machine width: 2400 mm Transport dimensions L x W x H: 3400 x 2400 x 2550 mm Weight: approx. 4800 kg In good condition

Stav: použitý, číslo stroja/vozidla: 008320, Pracovný rozsah os X: 3390 mm Duodpfx Ajx A Tczjfmjl Pracovný rozsah os Y: 1535 mm Pracovná plocha: S vákuovými konzolovými podperami Výkon hlavného vretena: 15 kW Počet riadených osí: 5 osí Počet vŕtacích jednotiek: 41 Počet pozícií nástrojov: 33

Stav: použitý, Rok výroby: 1999, x-pojezd 505 mm y-pojezd 355 mm Djdpfxoxzk N No Afmoul z-pojezd 610 mm Riadenie Heidenhain TNC 430 Hmotnosť stroja cca 4000 kg

Stav: použitý, Rok výroby: 2012, CNC obrábacie centrum Výrobca: Unverzagt Typ: UVA 550 Plus Rok výroby: 2012 Ovládanie: Siemens 828D Prevádzkové hodiny: cca 3.000 Pohybové dráhy X/Y/Z: 600 x 400 x 500 mm Djdpfx Ajwv Tm Nsfmoul Pozície nástrojov: 20 Držiak nástrojov: SK40 Rozsah otáčok vretena: 10.000 ot/min Bezdrôtová sonda Hexagon Dopravník triesok Chladič vretena IKZ (vnútorný chladiaci systém) 101225ä

Stav: veľmi dobrý (použitý), 5-osé (X-Y-Z-C-5) CNC obrábacie centrum na frézovanie, vŕtanie, rezanie a olepovanie hrán. Vyhotovenie vo vyloženom mostovom dizajne – bezpečnostné nášľapné rohože. PC riadenie typu ICOS OPEN CNC – softvér IMAWOP. Pracovné stoly ako konzolový stôl (č. 8 konzolových stolov x 1400 mm). Konzolový stôl s LED / pásom diódového osvetlenia. Automatický systém výmeny nástrojov (zásobník – 18 miest). Užitočný pracovný rozsah (X - Y - Z): 4000 x 2100 x 300 mm. Užitočný pracovný rozsah (X - Y - Z) pri olepovaní: 4000 x 1800 x 60 mm. 2 pracovné zóny. Vákuová pumpa s kapacitou 140 m³/h. Dopravník na triesky. S oddeleným elektrickým a ovládacím rozvádzačom. Celkový pripojovací výkon: 32 kW. Pracovné jednotky (horné): - 21 nezávislých vertikálnych vŕtacích vretien (4 x 1,2 kW) - 1 vertikálne hlavné vreteno (frézovacia jednotka) HSK 63 ROBOT (16 kW) - Olepovacia jednotka, nanášacie agregát lepidla (Hot Melt) VT 100 - Materiál na hrany (rolky) hrúbka (min/max) 0,4 / 3 mm - Zásobník hrán na rolky (2 pozície) Duedpehu U Nxofx Afmsl VOLITEĽNÁ VÝBAVA: - Pílový agregát, max. priemer 200 mm - Kombinovaná jednotka (zarovnávacia fréza – profilová stieracia čepeľ) - Vŕtacia hlava (so 4 horizontálnymi vŕtacími vretenami)

Stav: použitý, Rok výroby: 2023, New demonstration machine! List price: €76,170 net Base machine, fully equipped in standard version for drilling and grooving: For detailed technical data, see data sheet for ProTec Type 0571. Processing unit with: - PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y - 4th drilling axis in Y Workpiece sizes and weights: - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in throughfeed mode, max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000-20,000 rpm, with frequency converter, reversible rotation, for HSK63F tool holder with 462E/OZ25 collet chuck, cutter length up to 130 mm. Info: Processing unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw, and optional Profit milling unit Connected load: 12 kVA Rated current: 17.5 A Fuse: 32 A Voltage: 400 V, 50 Hz, 3-phase (without transformer) Network: TN or TT Pneumatic connection: 7 bar (102 psi) - At the machine: coupling plug (quick coupling) 1/4", DN7.2, brass, by manufacturer - To the machine: coupling socket (quick coupling) 1/4", DN7.2, brass, by customer - Supply line, minimum internal hose diameter 12 mm Compressed air requirement: continuous consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air) Extraction connection: 3x suction nozzles, dia. 80 mm Extraction velocity: 30 m/sec – measured at the suction nozzle Extraction volume required: min. approx. 2500 m3/h Machine weight: approx. 1650 kg (with options!) Machine installation area: In principle, a ProTec fix can be anchored to the floor. A concrete floor (or foundation) is required (at least at the 4 machine corners/feet). Equipment: - Protec 571 Profit HSK63F with 3-position magazine - Folding roller table 765 mm (Y-axis), for machine front, width 500 mm - Folding roller table 765 mm (Y-axis), for machine rear, width 500 mm - Auxiliary stop 600 mm with integrated rollers for roller tables - Additional safety device via lamella curtain - Prerequisite for horizontal milling for Lamello P-System (without tools for Lamello P-System) Drill set for Protec, shank ø 10 mm with clamping surface (JSO): - 1 HW roof tip drill 5x70mm (NL 35mm), LH #30566-5-05035-L - 3 HW dowel drills 5x70mm (NL 35mm), RH #30540-5-05035-R - 4 HW dowel drills 5x70mm (NL 35mm), LH #30540-5-05035-L - 3 HW dowel drills 8x70mm (NL 35mm), RH #30540-5-08035-R - 5 HW dowel drills 8x70mm (NL 35mm), LH #30540-5-08035-L - 2 HW dowel drills 10x70mm (NL 35mm), LH #30540-5-10035-L - 1 HW cup drill 15x70mm (NL 35mm), LH #30300-5-15070-L - 1 HW cup drill 20x70mm (NL 35mm), RH #30300-5-20070-R - 1 HW cup drill 35x70mm (NL 35mm), RH #30300-5-35070-R Dedpow Tfzfefx Afmjul Grooving cutter HW, dia. 125/30 mm, groove width (SB) 4.0 mm, Z=12, LH, Leitz. For chipboard and MDF only, solid wood on request and by agreement. Tool holder HSK63F 3 pcs For collet 462E/OZ25 Collet 462E/OZ25 for 25 mm shank 3 pcs Indexable insert end mill Z1+1 1 pc, HW with indexable insert drill tip, dia. 20, S25, LH 120, L2/L3 58 mm Grooving cutter HW-indexable insert Z1 1 pc with indexable drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (Adapter 0571WAB10 must be ordered separately.) Decorative grooving cutter HW-inde

Stav: pripravené na použitie (použité), Rok výroby: 2017, prevádzkové hodiny: 1 717 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 904B0018, šírka stola: 3 500 mm, dĺžka stola: 14 400 mm, priemer pílového kotúča: 1 000 mm, Výbava: Označovanie CE, dokumentácia / manuál, TECHNICKÉ DETAILY Max. priemer pílového kotúča: 1 000 mm C1: 540 ° B1: 250 ° C2: 540 ° B2: 90 ° Dĺžka stola: 14 400 mm Šírka stola: 3 500 mm Maximálny zdvih osi X: 5 000 mm Maximálny zdvih osi Y: 15 870 mm Maximálny zdvih osi Z: 1 000 mm DETAILY STROJA Počet frézovacích vretien: 1 Počet riadených osí: 2 5-osá jednotka výkon: 12 kW Dedpfx Asx Hg Stsfmoul Prevádzkové hodiny: 1 717 h Výkon hlavného motora: 55 kW Napätie: 400 V Prúdový odber: 130 A Výkon: 65 kW Transportné rozmery (D x Š x V): 40 000 mm x 2 400 mm x 2 700 mm VYBAVENIE Pílová jednotka s prírubovým spojením Frézovacia jednotka s meničom nástrojov Dokumentácia CE certifikácia

Stav: použitý, Rok výroby: 2015, prevádzkové hodiny: 7 206 h, 2 x CNC machining centers + accessories as a package, used 1. KONDIA A-6 Make: KONDIA Model: A-6 Year of manufacture: 2015 Control: Heidenhain TNC 530 Operating hours Spindle hours: 7,206 h Total power-on hours: 28,791 h Working area: X-axis: 600 mm Y-axis: 400 mm Z-axis: 510 mm Equipment: - 20-position tool changer - Coolant through spindle, 15 bar - Electronic handwheel - Left-hand chip conveyor 2. KONDIA A-10 Make: KONDIA Model: A-10 Year of manufacture: 2010 Control: Heidenhain TNC 530 Operating hours Spindle hours: 11,095 h Total power-on hours: 49,429 h Working area: X-axis: 1,000 mm Duedpfx Aex I S Icsfmel Y-axis: 500 mm Z-axis: 610 mm Equipment: - 40-position tool changer - Coolant through spindle, 15 bar - Electronic handwheel - Left-hand chip conveyor 3. Accessories - 2 x 3D workpiece probes - 1 x tool measuring probe - 6 x GRESSEL machine vices - Approx. 150 SK 40 toolholders with tools The machines were used for in-house production by a manufacturer of automation technology. Mainly aluminium parts were machined.

Stav: veľmi dobrý (použitý), CNC MACHINING CENTER (POINT-TO-POINT) - 4 Axes Gantry-style design Control: Power Control PC85 – Software: woodWOP Work unit head enclosed in a safety cabin Clamping table with 10 consoles (length: 1500 mm) LASER system on X-axis – for console positioning and Y-axis for vacuum suction cup positioning Automatic tool change system 2 rotary tool changers – Magazine/tool stations: W8 (8 positions) + (3 positions) Maximum working area (X-Y-Z): 6000 mm x max 1600 mm x 125 mm 4 working zones – 2 x vacuum pumps (capacity in m³/h) Dsdor Ai Sqopfx Afmoul Separate electrical and control cabinet Total connected load (kW): 27.5 (approx.) WORKING UNITS (TOP): 21 independent vertical drilling spindles (High Speed 7500) 10 independent horizontal drilling spindles (6 on X-axis + 4 on Y-axis) Drill head motor power (kW): 2.3 1 vertical main spindle (milling aggregate) HSK 63: 9 kW 1 grooving saw unit, diameter 125 mm, swiveling 90° in X-Y direction

Stav: použitý, Rok výroby: 2017, prevádzkové hodiny: 4 898 h, pojazdová vzdialenosť osi X: 1 600 mm, zdvih osi Y: 800 mm, zdvih osi Z: 800 mm, CNC obrábacie centrum, použité Značka: AWEA Typ: BM-1600 Rok výroby: 2017 Dusdpjx I S E Isfx Afmjl Ovládanie: Heidenhain iTNC 530 HSCI Prevádzkové hodiny: Hodiny vretena: 4 898 h Celkový počet zapnutých hodín: 18 739 h Pracovný rozsah: X-os: 1 600 mm Y-os: 800 mm Z-os: 800 mm Vreteno: Otáčky: 10 000 min-1 Výkon: 11/15 kW Upínanie: BT 50 Stôl: 1 700 x 800 mm Max. zaťaženie: 2 000 kg Vybavenie: - Zásobník nástrojov na 40 pozícií - Vnútorné chladenie (IKZ) 20 bar - Elektronický ručný ovládač - Dopravník triesok vľavo - Priame meranie dráhy Stroj bol používaný na vlastnú výrobu produktov u výrobcu automatizačnej techniky. Spracúvalo sa hlavne hliník.

Stav: veľmi dobrý (použitý), CNC MACHINING CENTER (POINT-TO-POINT) – 5 Axes (DRIVE 5C +) Gantry machine (mobile in X-axis) Control system (PC85) Software: woodWOP Safety enclosure for machining head Clamping table with console system, Model K-Table Console support arms (qty): 10 Clamping table dimensions (mm): 1250 Pneumatic kit powerClamp - clamping element - K Table Workpiece clamping chuck Automatic tool change system Disc-type tool changer – Magazine spaces (no. of tool positions): 14 Dodpfx Aenzhwhjfmjul Maximum working area (X - Y - Z): 6175 mm x max 1550 mm x 300 mm No. 2 working area – Vacuum pump (capacity in m³/h): 2 x 100 Chip conveyor With separate electrical and control panel. Total connected load (kW) (50 A) WORKING UNITS (TOP): No. 9 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 along X-axis + 2 along Y-axis) (1.5 kW) No. 1 Vertical main spindle (milling unit) HSKF63 DRIVE 5C + (10 kW)

Stav: veľmi dobrý (použitý), 4-axis CNC controlled MACHINING CENTER Design in cantilever construction, ICOS-Open control. Software: IMAWOP / IMATRONIC - BIMA Fast Cut Clamping table with consoles, no. 6 consoles (1400 mm) Automatic positioning of the consoles (X-axis) Automatic positioning of the vacuum clamps (Y-axis) Automatic tool change system Disc magazine - 18 tool positions Maximum working area (X - Y - Z): 4250 x 1600 x 60 mm Minimum workpiece dimensions (X-Y-Z): 295 x 115 x 14 mm Dodpfx Afsvxhnusmsul Maximum workpiece dimensions (X-Y-Z): 4250 x 2200 x 60 mm Chip removal conveyor With separate electrical cabinet and control panel. Total connected load: 28 kW WORKING UNITS (TOP): Vertical main spindle (milling unit) HSK F63 - Power: 14.5 kW (S6) / 7.5 kW (S1) 3 clamps for fixing and moving panels onto the suction cups of the machine 5 air tables for parking panels before processing Vacuum system with program-controlled suction for lifting panels onto the conveyor belt. Panel exit system with motorized conveyors.

Stav: veľmi dobrý (použitý), CNC MACHINING CENTER (POINT-TO-POINT) – 4 axes (5 axes with FLEX 5) Gantry machine (travelling along X-axis) Control: Powertouch controller (PC85), Software: woodWOP Working head safety enclosure Clamping table with K-Table model consoles Console support arms (qty.): 8, Clamping table dimensions (mm): 1340 Automatic positioning of consoles (X-axis) Duedpsw Dc Nijfx Afmol LED indicators show the programmed position of vacuum cups (Y-axis) Workpiece clamping chuck, automatic tool change system – POWERCLAMP Disc tool changer – Number of tool positions: 18 Maximum working area (X – Y – Z): 4000 mm x 1550 mm x 60 mm Maximum working area (X – Y – Z) for edge banding: 4000 mm x 1500 mm x 60 mm Working area – Vacuum pump (capacity in m³/h): 100 / 140 Chip conveyor Separate electrical control cabinet Total connected load: 52 A WORKING UNITS (UPPER): No. 17 Independent vertical drilling spindles (High Speed 7500) No. 4 Independent horizontal drilling spindles (2 on X-axis + 2 on Y-axis) Drilling head motor power (kW): 2.2 No. 1 Vertical main spindle (milling unit), HSK 63 (15 kW) Edge banding unit Power Edge (Y-axis), edge banding aggregate (hot melt glue + premelter) Edge roll material thickness (min/max) mm: 0.4 – 3 Edge roll magazine (1 station) Pre-trimming station (cutting unit) No. 1 beam unit (4 horizontal drilling spindles) No. 1 circular saw unit (diameter mm 125) Combi-unit (flush trimming / profile scraper)

Stav: veľmi dobrý (použitý), 3-axis (X-Y-Z) CNC-controlled "FLEXIBLE" MACHINING CENTER Movable table (workpiece), stationary working head – horizontal table (workpiece) PowerControl CNC controller (woodWOP software) Working head safety enclosure No. 2 safety interlock workpiece clamps in the working area WEEKE pre-positioning unit – for faster workpiece positioning in machines with clamping grippers. Dujdpolkdpmefx Afmjl Infeed support table (workpiece support) – outfeed table (with conveyor belt) With automatic panel pusher Minimum workpiece dimensions (X-Y-Z) mm: 200 x 70 x 8 (2 x 4 mm) Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1000 (option 1300) x 80 (2 x 40 mm) Simultaneous machining of two workpieces (in Z-axis) With separate electrical and control cabinets WORKING UNITS (TOP): 2V32, 2H8X/Y2, N2 X-Y90, F2-ETP-6 KW No. 23 independent vertical drilling spindles (drill head power 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (X-Y direction, swivels 90°), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW) WORKING UNITS (BOTTOM): No. 23 independent vertical drilling spindles (drill head power 2.3 kW) No. 5 independent horizontal drilling spindles (4 in X + 1 in Y) No. 1 grooving saw unit (X-Y direction, swivels 90°), diameter 125 mm No. 1 vertical main spindle (milling unit) ETP (vertical main spindle output 6 kW)

Stav: veľmi dobrý (použitý), 3-Axis (X-Y-Z) CNC Machining Centre Movable workpiece table, movable working head – Vertical plate (workpiece) Control system: TPA – Albatros software Working head safety enclosure Workpiece feed by transport chain Rubber rollers to secure the workpiece during feed and processing Infeed table (with conveyor belt) – Outfeed table (with conveyor belt) With workpiece return system to operator (180°) Minimum working range (X - Y - Z) mm: 260 x 40 x 10 (approx.) Maximum working range (X - Y - Z) mm: unlimited x 1300 x 80 (approx.) Separate electrical and control panel Djdeihfiispfx Afmoul Total connected load (kW): 35 WORKING UNITS: Drilling unit with vertical spindles (qty.): 1 Independent vertical drilling spindles (qty.): 24 (7 in X + 17 in Y) Drilling unit with horizontal spindles (qty.): 2 Independent horizontal drilling spindles (qty.): 36 (9+9 = 18 x 2) Drill head motor power (kW): 3 x 3 (approx.) Vertical main spindle (milling unit): 1 Vertical main spindle motor power (kW): 7.5 (approx.) Automatic tool changer – turret type, magazine with 10 tool positions

Stav: veľmi dobrý (použitý), 4-osé CNC OBRÁBĚCÍ CENTRUM pro frézování, vrtání, řezání a olepování hran. Husí krk stroj – bezpečnostní nášlapné rohože vpředu CNC řízení typ PowerControl PC 85 (software WoodWop) 10 podpěr/konsol (mm 1340) LED indikují naprogramovanou pozici vakuových přísavek (osa Y) Automatický výměnný systém nástrojů (talířový měnič, 18 pozic) Užitná pracovní plocha (X - Y - Z) mm 6175 x 1550 x 60 Užitná pracovní plocha (X - Y - Z) pro lepení mm 6000 x 1475 x 60 2 pracovní pole – 2 vakuová čerpadla (kapacita 100 m3/h) Dopravníkový pás pro odvádění odpadů z pracovního procesu Celkový příkon Kw 27 Dujdpfx Ajh Ucn Refmel Pracovní skupiny (shora) 17 nezávislých vertikálních vrtacích vřeten (2,2 kW) 4 nezávislá horizontální vrtací vřetena 1 vertikální elektrovřeteno HSK F63 (hlavní vřeteno 11 kW) 1 drážkovací pila 0°-90°, průměr (mm) 125 Olepovací jednotka Power Edge (osa Y), olepovací agregát (lepidlo Hot Melt + předtavič) Materiál v rolích (hrany), tloušťka (min/max) mm 0,4 – 3 Zásobník hran pro role (2 pozice)

Stav: veľmi dobrý (použitý), 4-axis (X-Y-Z-C) CNC machining center for milling, drilling, cutting, and edge banding. Gantry-type construction, equipped with ICOS-Open control system. Software: IMAWOP + IMAwinCAD. Setup table with consoles. No. 6 DYNAPOINT consoles (1450 mm). Automatic positioning of the consoles (X-axis), automatic positioning of the vacuum pods (Y-axis). Automatic tool changer – 18 tool positions. Max. working area (X-Y-Z): 6300 x 1450 x 100 mm Min. workpiece size (X-Y-Z): 320 x 115 x 14 mm Dedpfx Afjtixpujmoul Max. workpiece size (X-Y-Z): 5600 x 2100 x 38 mm Chip conveyor included. Supplied with separate electrical control cabinet and control panel. Total connected load: 34 kW WORKING UNITS (TOP): 1 vertical main spindle (milling unit) HSK F63 – drive power 18 kW (S6) Saw unit, 90° fixed, blade diameter 200 mm Edge banding unit (installed on machine) VT 100 2-position roll magazine Combination unit (flush-milling and profile scraper) Feed system with brush table 6 clamps for securing and moving the panel on the machine’s suction cups Workpiece outfeed with motorized rollers and angle transfer system

Stav: veľmi dobrý (použitý), 4-osé (X-Y-Z-C) CNC obrábacie centrum na frézovanie, vŕtanie, rezanie a olepovanie hrán Ovládanie ICOS CNC (softvér IMAWOP) Maximálny pracovný rozsah (X - Y - Z) mm: 3100 x 2000 x 100 Maximálny pracovný rozsah (X - Y - Z) pri olepovaní (mm): 3100 x 1925 x 60 6 upínacích stolov s konzolami (počet konzol) – mm 1400 LED navádzací systém pre pozicionovanie vákuových prísaviek (puzdier) na osi Y 1 x vákuová pumpa (kapacita 250 m3/h) Ochranný kryt pracovného agregátu, bezpečnostné rohože 1 x vertikálne hlavné vreteno (frézovacia jednotka) HSK F63 (18 kW) Automatický menič nástrojov (tanierový menič), 18 pozícií 14 nezávislých vertikálnych vŕtacích vretien (2 x 1,2 kW) Krížová jednotka so 4 horizontálnymi vŕtacími vretenami + drážkovacia píla (max. priemer 125 mm) Olepovacia jednotka (horúce tavné lepidlo) VT 100 2 zásobníky hrán na rolky VOLITEĽNÉ PRÍSLUŠENSTVO: 1 x adaptérová jednotka „FLEX 5” Mod. VARIO NC Dedpfx Afeq Nmutemeul 1 x adaptérová jednotka na zarovnávacie alebo skosovacie frézovanie 1 x adaptérová jednotka na zarovnávacie frézovanie a profilovacie nože 1 x čítačka čiarových kódov

Stav: veľmi dobrý (použitý), 5-axis (X-Y-Z-C+ 5°) CNC MACHINING CENTER (POINT-TO-POINT) CNC machining center for milling, drilling, cutting, and edge banding Control: ICOS CNC (IMAWOP software) Maximum working area (X-Y-Z) mm: 4000 x 1600 (2000) x 100 (Z-axis travel mm: 650) Maximum working area (X-Y-Z) in edge banding (mm): 4000 x 1600 x 100 No. 8 clamping table with consoles (number of consoles) – mm 1400 LED setup aid for vacuum suction cup (sleeves) positioning (Y-axis) No. 2 vacuum pumps (capacity 140 m³/h) Dujdpfew A Ruqox Afmel Safety enclosure for machining head, safety tread mats Chip conveyor belt No. 1 vertical main spindle (milling unit) ROBOT HEAD HSK F63 (16 kW) Automatic tool change system (carousel changer), No. 18 tool positions No. 21 independent vertical drilling spindles (4 x 1.2 kW) No. 8 independent horizontal drilling spindles (4 in X + 4 in Y) Grooving saw unit (swiveling 90° in X-Y directions), diameter (mm) 200 Edgebanding unit (PUR glue + pre-melter 283.203) VT 100 / 100 WITH 45° SWIVELING EDGEBANDING UNIT No. 2 edge magazines for rolls OPTIONS: No. 1 adapter unit for flush milling or chamfering No. 1 adapter unit for flush milling and profile scraping knife