Donau Dr 40 Digi kúpiť použité (51)

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Danumeric 440, fully overhauled and digitized in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Traverse path of arm: 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) on rear machine base • 2 T-slots (18 mm) on left machine base • Tapping attachment • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge – table top min.: 70 mm, max.: 680 mm Distance spindle lower edge – floor min.: 970 mm, max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity (solid): St 60 Ø40 mm, GG 22 Ø50 mm Thread cutting: St 60 M36, GG 22 M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Torque: max. 250 Nm, constant from 15–2,000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W-axis): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axes over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Nwedpou Dg D Aofx An Uoh Weight of Danumeric 440 (without packaging) with 1800 x 600 mm table: 2,800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: Cartesian or polar; absolute or incremental readings Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tooling suggestions based on machining type, material-dependent cutting data suggestions Tool management: Maximum 500 tools Subroutines: Yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable targeted entry functions Zero point determination: Cycles for determination of zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection on round parts via probing reference edges/faces Test-graphic: Graphic display of drilling patterns Data interfaces: USB

Stav: dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system Nodpfx Aermkfnen Uewh • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: Njdpfxjvv Spko An Ujwh - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: generálne opravený (použitý), Rok výroby: 2006, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle MK 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • Two 18 mm T-slots each at the rear and left of the machine base • 3-axis digital readout • Machine lamp • Central lubrication • Table surface machined all round • Safety guard on the drill • Coolant system Dimensions and Travels Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance from spindle nose to – table top (min./max.) mm 40 / 710 – machine base (min./max.) mm 840 / 1510 Drilling radius (min./max.) mm 540 / 1590 Work table height mm 900 Machining Capacities Drilling capacity, solid: St 60 Ø 45 mm GG 22 Ø 55 mm Nodpsx Uwpxsfx An Ujwh Thread cutting: St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2600 Documentation Operating manual, including Lubrication and hydraulic diagram Electrical schematic

Stav: takmer ako nový (použitý), Rok výroby: 2021, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Nodpjxn A Spefx An Uswh Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: pripravené na použitie (použité), Ponúka sa použitý rýchlobežný radiálny vŕtací stroj Donau DR 32 séria 731. Uchytenie nástroja: MK4, zdvih vretena: 200 mm, vyloženie: cca 900 mm-1050 mm, výškové nastavenie: cca 400-600 mm, rozsah otáčok: 40-2000 ot/min, posuvy: 0,1/0,2/0,3/0,4 mm na otáčku, integrované chladiace zariadenie, vybavený otočným výložníkom, veľký stôl s T-drážkami, hmotnosť cca 1500 kg-1800 kg, rozmery stroja X/Y/Z cca 1800 mm/1000 mm/2200 mm. Obhliadka je možná po dohode. Nedpfx Aneykut Sj Uewh

Stav: dobrý (použitý), Rok výroby: 1962, Rýchlobežná radiálna vŕtačka, radiálna vŕtačka, vŕtačka, konzolová vŕtačka, rýchlobežná radiálna vŕtačka - Upínací stôl: 400 x 1100 mm - Vyloženie ramena: 930 mm - Kuželové uchytenie: MK4 Nodpfx Anjirax Ue Uowh - Výkon motora: 1,35/1,8 kW - Otáčky: 41-1700 ot./min - Stĺp: Ø 200 mm - Zdvih vretena: 125 mm - Závitovacie zariadenie: ÁNO - Posuv: 0,075 - 0,3 mm/ot. - Rozmery: 1800/1235/V2240 mm - Hmotnosť: 1500 kg

Stav: takmer ako nový (použitý), Donau Donauflex 135 rýchlobehá radiálna vŕtačka Výrobca: Donau Typ: Donauflex 135 Rok výroby: 2020 Stav: Veľmi dobrý, použitý, ale ako nový Nwedjzgvmqopfx An Ujh Okamžite k dispozícii zo skladu.

Stav: použitý, Rok výroby: 1980, Milling length: 1,750 mm Milling width: 260 mm Module - max.: 10 Module - min.: 12 Total power requirement: 8 kW Machine weight approx.: 4,500 kg Space requirement approx.: m DONAU - KNAPP Universal Rack Milling Machine Model: UZFM - V 300 H Year of manufacture: 1980 # 80-234x _____ Max. gear length: 1,750 mm Transverse milling travel / milling width (max.): 260 mm Helical gearing up to: 30° Module range for steel/grey cast iron: max. 10 to 12 Effective clamping table size: 275 x 1,830 mm Mounting height under milling spindle axis (min./max.): 150 / 430 mm Milling cutter Ø min. / max.: Ø 108 + 2 x cutting depth / max. 165 mm Max. milling cutter width, cantilevered / with counter support: 50 / 140 mm Milling arbor Ø max.: 22 – 50 mm 9 spindle speeds: 29 – 178 rpm Nwjdpfx Ajt Hxagsn Ush Milling slide swivels right / left: 30° Milling spindle head swivels right / left: 30 / 45° Infinitely variable feeds (milling slide): 0 – 600 mm/min Rapid traverse return: 2,000 mm/min Milling spindle drive approx.: 4 kW Total drive: 8 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment: • Automatic milling cycle control via cam field on the milling head slide and on the table slide, with skip function (automatic bridging of areas not to be milled), and pendulum milling operation (synchronous milling on one half of the table and workpiece changeover on the second half) • Hydraulic workpiece clamping device approx. 260 x 1,800 mm continuous, max. clamping width 140 mm, clamping height approx. 60 mm, with separate hydraulic unit and electric release. • Manual fine adjustment of the table (0.001 mm), e.g. for precise positioning into a pre-milled tooth rack • Various change gears (approx. 10 pcs), 2 milling arbors, centralised lubrication with impulse system, built-in hydraulic unit, separate coolant system, separate electrical cabinet, various used rack cutters. Price, ex stock plus VAT: €49,500 This machine is particularly suitable for milling racks and for manufacturing broaching tools (relieving cuts by swivelling the milling head). Condition: very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stav: použitý, Rok výroby: 1990, Frézovacia dĺžka 2100 mm Frézovacia šírka 300 mm Max. modul 16/18 Min. modul Celkový požadovaný výkon 10 kW Hmotnosť stroja cca 5 t Priestorová náročnosť cca m D O N A U - K N A P P Univerzálna CNC riadená frézka na ozubené tyče Typ UZFM - V 300 H - CNC Rok výroby 1990 č. 90-244x _____ Max. dĺžka ozubenia 2 100 mm Priečna frézovacia dráha / max. frézovacia šírka 300 mm Rozsah modulov, oceľ / liatina max. 16 / 18 Upínacia plocha stola 510 x 2 400, resp. 275 x 2 120 mm Stavebná výška pod osou frézovacieho vretena min./max. 150 / 430 mm Frézovací priemer min./max. Ø125 + 2x hĺbka rezu / Ø280 mm Max. šírka frézy, konzolová/s oporným ložiskom 50 / 140 mm Priemer tŕňa max. 22–50 mm Frézovacia hlava prestaviteľná vpravo / vľavo (proti spätným záberom) 30 / 45 ° Nedpfx Ajt Hwwqsn Ujwh Frézovací suport prestaviteľný vpravo / vľavo (šikmé ozubenie) 30° 9 rýchlostí vretena 40–120 ot./min. Posuvy plynulo nastaviteľné (frézovací suport) / rýchlobež 0–1 300 / 2 000 mm/min Rýchloposuv stola 10 000 mm/min Pohon frézovacieho vretena 5,5 kW Celkový príkon 10 kW - 400 V - 50 Hz Hmotnosť 5 000 kg Príslušenstvo / zvláštne vybavenie: - SIEMENS CNC riadenie model M 810 pre deliacu os (X), možnosť rýchleho prestavenia bez výmenných kolies; dielne kroky 0,001–2 100 mm, programovanie rôznych deliacich vzdialeností, nastavenie všetkých posuvových a rýchloposuvových dráh cez hydrauliku, posuv nastaviteľný pre 2 rezy, obmedzenie dráhy osí cez prednastaviteľné koncové spínače - Zostavené hydraulické upínacie zariadenie pre obrobky cca 2 000 x 160 mm - Zosilnená frézovacia hlava s plynulo nastaviteľnou rýchlosťou otáčania frézy - Samostatne stojaca rozvádzačová a hydraulická jednotka, v stole zabudovaný dopravník triesok a samostatne stojaci dopravník triesok s chladiacim zariadením, centrálnym mazaním atď. Stroj je možné dovybaviť súčasným SIEMENS riadením!

Stav: použitý, Rok výroby: 1980, Upínanie MK 3 Posuv: 4 stupne Max. otáčky: 2580 Nwjdpszfqmpofx An Ueh x-dráha 2500 mm Vyloženie 1000 mm Drážkovaná doska 1000/2800 mm Hmotnosť 3,7 t 2 balíky Na dopravu je potrebných 7,5 nakladacích metrov

Stav: použitý, Rok výroby: 1960, Technické údaje: Max. výška obrobku: 600 mm Vyloženie: cca 700 mm Vŕtací výkon v oceli (priemer): 25 mm Veľkosť stola: 1100 x 400 mm Stroj sa momentálne nachádza v technickom oddelení. Stroj preto NIE je zverejnený/vystavený. Práce na oprave stále prebiehajú.... Nwsdpfx Ajx Afn Nsn Ujh *

Stav: použitý, Rok výroby: 1971, Frézovacia dĺžka 1750 mm Frézovacia šírka 260 mm Nsdeylpzyspfx An Uowh Modul - max. 10 mm Rozmery stola vrátane vodnej drážky 460 x 2100 mm Upínacia plocha stola: 250 x 1850 mm Maximálna šírka frézy 100 mm Posuv frézovacieho sania, plynulý 0 - 500 mm/min. Rýchloposuv 3000 mm/min Frézovacia hlava - sklopná + / - 30° Rozsah otáčok frézovacieho vretena, v 9 stupňoch 29 - 178 ot./min. Frézovacia hlava sklopná na oboch stranách pre šikmé ozubenie 30° Hmotnosť stroja cca 4 t Priestorová náročnosť cca 4 x 1,85 x 1,85 m Vybavenie/Príslušenstvo - 7 zverákov - Prestavovacie ozubené kolesá - Upínacie prvky - Dokumentácia

Stav: nový, SPS riadiaca doska prevodovky Nová za starú Na samomontáž alebo montáž naším servisným technikom Nwsdpfxsy Rkkhs An Uoh

Stav: takmer ako nový (použitý), Vhodné pre Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Njdpfxjy Ri Hne An Uowh

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Výrobca: KNAPP-DONAU Model: UZFM Rok výroby: 1974 Stav: použitý Cena a miesto Miesto: Rostock, Nemecko: Dĺžka frézovania 1800 mm Šírka frézovania 260 mm Modul - max. 10 mm Rozmery stola vrátane vodnej drážky 460 x 2100 mm Upínacia plocha stola: 250 x 1850 mm Maximálna šírka frézy: 100 mm Nwsdpfxsy Rgmre An Ujh Posuv frézovacieho saní, plynulo 0 - 500 mm/min Rýchloposuvy 3000 mm/min Frézovacia hlava - výkyvná + / - 30 ° Rozsah otáčok frézovacieho vretena, v 9 stupňoch 29 - 178 ot./min. Frézovacia hlava výkyvná na obe strany pre šikmé ozubenie 30 ° Hmotnosť stroja cca 35 t Rozmerovo cca 4 x 1,85 x 1,85 m Výbava/príslušenstvo - 11 zverákov - výmenné prevody - upínacie prostriedky - dokumentácia

Stav: dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, • Work table 1200 x 750 mm with 5 T-slots Nwsdeynt Ucopfx An Ueh • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 each 18 mm T-slots on the machine base, rear and left • Machine lamp • Central lubrication • Table surface machined all around • Drill safety guard • Coolant system Dimensions and Travel Ranges Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – tabletop min mm 40 Distance spindle nose – tabletop max mm 710 Distance spindle nose – baseplate min mm 840 Distance spindle nose – baseplate max mm 1510 Drilling radius min mm 540 Drilling radius max mm 1590 Work table height mm 900 Machining Performance Drilling capacity (solid) Steel 60 Ø 45 mm Drilling capacity (solid) GG 22 Ø 55 mm Thread cutting Steel 60 M 36 Thread cutting GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant torque range min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stav: dobrý (použitý), Rok výroby: 1999, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 each 18 mm T-slots on the machine base, rear and left • Machine lamp • Central lubrication Nsdpfx Aoylnpion Uewh • Table surface machined all around • Drill safety guard • Coolant system Dimensions and Travel Ranges Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – tabletop min mm 40 Distance spindle nose – tabletop max mm 710 Distance spindle nose – baseplate min mm 840 Distance spindle nose – baseplate max mm 1510 Drilling radius min mm 540 Drilling radius max mm 1590 Work table height mm 900 Machining Performance Drilling capacity (solid) Steel 60 Ø 45 mm Drilling capacity (solid) GG 22 Ø 55 mm Thread cutting Steel 60 M 36 Thread cutting GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant torque range min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stav: generálne opravený (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 each 18 mm T-slots on the machine base, rear and left • Machine lamp • Central lubrication • Table surface machined all around • Drill safety guard • Coolant system Dimensions and Travel Ranges Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – tabletop min mm 40 Distance spindle nose – tabletop max mm 710 Distance spindle nose – baseplate min mm 840 Distance spindle nose – baseplate max mm 1510 Drilling radius min mm 540 Drilling radius max mm 1590 Nwodpfeyhdvkox An Uoh Work table height mm 900 Machining Performance Drilling capacity (solid) Steel 60 Ø 45 mm Drilling capacity (solid) GG 22 Ø 55 mm Thread cutting Steel 60 M 36 Thread cutting GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant torque range min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) With 750 x 1200 mm table kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical wiring diagram

Stav: generálne opravený (použitý), Rok výroby: 2005, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 1 500 mm, zdvih osi Y: 1 000 mm, zdvih osi Z: 700 mm, maximálna rýchlosť vretena: 8 000 ot./min, Travelling column machine Completely overhauled in 2025 Work table clamping surface: 1500 x 1000 mm Table height: 750 mm Number of T-slots: 7 T-slot size (DIN 650): 18 mm Travel paths X-axis: 1500 mm Y-axis: 1000 mm Z-axis: 700 mm Distance table top – spindle end (min/max): 150 / 850 mm Main spindle drive for 8000 rpm Tool holder: SK 40 AC motor, frequency controlled: 26 kW at 44% duty cycle Speed range: 15 – 8000 rpm Torque: 245 Nm Through-spindle coolant (IKZ) Chip conveyor with band filter system Feed drives X-axis AC servo motor: 3.5 kW Y-axis AC servo motor: 2.0 kW Nsdpow I Tm Sjfx An Uowh Z-axis AC servo motor: 3.5 kW Rapid traverse speed (X/Y/Z): 30/30/20 m/min Indirect path measuring system Accuracy Positioning accuracy X, Y axis over 1000 mm: ±0.0150 mm Repeatability X, Y axis: ±0.0075 mm Positioning accuracy Z axis: ±0.0150 mm Repeatability Z axis: ±0.0075 mm 24-position tool magazine Mounted on left side of the machine - Tool positions: 24 - Tool shank (DIN 69871 / 69872): SK 40 - Max. tool diameter: 76 mm - Max. tool length: 250 mm - Max. tool weight: 8 kg Machine control: Heidenhain iTNC530

Stav: dobrý (použitý), Rok výroby: 1994, číslo stroja/vozidla: 133120, Ponuka 24506 Technické údaje: - Vŕtací výkon do plného ocele ST 60: 35 mm - Vŕtací výkon do liatiny GG 25: 42 mm - Rezanie závitov v ST 60: M 30 - Rezanie závitov v GG 25: M 36 - Upnutie vŕtacej vretena: MK 4 - Zdvih pinoly: 170 mm - Otáčky vŕtacieho vretena plynulo nastaviteľné: 20 - 3200 ot./min - Posuv vŕtania plynulo nastaviteľný: 0,02 - 0,70 mm/otáčka - Vzdialenosť od stĺpa k vretenu, min./max.: cca 490 / 1240 mm - Uhol natočenia: 330° - Rozmer stola: 1200 x 620 mm - Výška stola: 900 mm Nedpfx Anewndydo Ujwh - Motorické výškové nastavenie / zdvih stĺpa: 450 mm - Hydraulické upínanie stĺpa a ramena - T-drážky vertikálne na ľavej strane stroja - Zariadenie na chladenie - Pohon: 400 V / 5,0 kW - Potrebná plocha (približne): šírka 1500 x výška 2600 x hĺbka 1700 - 2500 mm - Hmotnosť (približne): 2100 kg

Rok výroby: 2010, stav: pripravené na použitie (použité), Vŕtací výkon pre oceľ / liatinu: 25 mm / 32 mm, závitovacia kapacita pre oceľ / liatinu: M20 / M24, upínanie nástroja: MK4, otáčky vretena: 3500 ot./min, posuv: 1050 mm/min, vyloženie: 420 mm - 1320 mm, pojazd ramena: 900 mm, vertikálny pojazd stĺpa: 430 mm, zdvih pinoly: 140 mm, uhol natočenia: 325°, rozmery stola X/Y: 1200 mm / 600 mm, hnacia sila: 1,6 kW, rozmery stroja X/Y/Z: približne 2500 mm / 900 mm / 1500 mm, hmotnosť: cca. 2200 kg. Dokumentácia je k dispozícii. Obhliadka na mieste je možná. Nedpou N Hdajfx An Uswh

Stav: dielensky repasované (použité), Rok výroby: 2002, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 2 900 mm, zdvih osi Y: 1 000 mm, zdvih osi Z: 700 mm, CNC vŕtacie a frézovacie centrum Donau DANUSYS 2910, rok výroby 2002, repasované Technické údaje: Ovládanie Heidenhain iTNC 530 Pojazdy osi X, Y, a Z: 2900 / 1000 / 700 mm Frézovanie St 60: 300 cm³/min Vŕtanie do plného St. 60: ø 40 mm Rezanie závitov: M30 Posuvová rýchlosť osí X, Y a Z: 7 / 7 / 7 m/min Vreteno HSK 63, 15000 ot./min Chladiaca voda IKZ a AKZ Zásobník nástrojov s 32 miestami, rozdelené na 2 x 16 ks Repasované časti: - Vreteno kompletne repasované výrobcom a novo navinuté - Opravený regulátor vretena - Repasovaná napájacia jednotka Heidenhain - Kontrola hlavného počítača Heidenhain MC422 a riadiacej jednotky CC422 - Vymeňené vozíky a vodiace lišty osi y Ďalšie príslušenstvo: Ručné koliesko HR 410 Nwedpfx Aewymtqjn Uoh Dopravník triesok s integrovanou nádržou na chladiacu vodu Dokumentácia (návod na obsluhu, rozličné príručky použitých dokumentov, schéma zapojenia atď.) Predaj zo skladu; medzipredaj vyhradený

Stav: použitý, Rok výroby: 2006, x-posuv 2900 mm y-posuv 1000 mm Nedpow S Nk Iefx An Uewh z-posuv 700 mm Ovládanie Heidenhain SK40

Stav: veľmi dobrý (použitý), Rok výroby: 1976, Funkcionalita: plne funkčný, číslo stroja/vozidla: ZFM300H 76 2301, Stroj na frézovanie hrebeňov Nedeykpl Nopfx An Uowh