Himoinsa Hiw 100 kúpiť použité (26 996)

Stav: použitý, číslo stroja/vozidla: 816b3dfbfa1c7d49b7d052bd6, pohotovostná hmotnosť: 2 500 kg, maximálna hmotnosť nákladu: 8 000 kg, celková hmotnosť: 10 500 kg, konfigurácia náprav: 2 nápravy, prvá registrácia: 07/2022, veľkosť pneumatiky: 235/75 r17,5, Rok výroby: 2022, Further Information Chassis – Central Axle Low-Bed Trailer Fine-grain steel welded construction, gearbox support leg at the front, telescopic rear support, wheel chocks with holder, steel mudguards covering both wheels. Towing Assembly – Central Axle Trailer Drawbar with certified 40 mm towing eye, drawbar height adjustable via spindle, maximum adjustment range 250 mm. Axles & Suspension Euro axles (manufacturer’s option), equipped with tapered roller bearings and S-cam brakes, axles/chassis laser-aligned to reduce tire wear and fuel consumption; parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load equalization (rocker compensation). Braking System 2-line pneumatic brake system, spring-loaded parking brake, two foolproof coupling heads at the front with connecting lines to the towing vehicle, ABS and ALB, ABS connector in front with connection cable. Note: The trailer may only be towed by vehicles that ensure proper ABS functionality! Electrical System 24 Volt, multi-chamber rear lights, side-mounted yellow LED lights, two white position lights at the front, two white/red lane marker lights at the rear, 1 x 15-pin connector at the front with connection cable. Kdodpeqmc Raofx Ab Seg TTS Bed Low-profile steel trough, bridge floor made of steel/chequer plate covering, steel side walls solidly welded to the floor, bridge length 5,500 mm, trough front and sides equipped with load-lock profile for lashing strap hooks (8 pcs at the front, 16 pcs per side). Note: Slight floor waviness due to welding distortion is possible! Pair of lashing rings: 1 x front corners of the steel trough and 1 x at the rear in the floor, each rated 5 t. Additional pairs of lashing rings in the floor, each 5 t. Ramps Steel loading ramps: 2,300 mm long, 510 mm wide, laterally adjustable, handgrip on ramps, wooden surface, gas strut assisted for single-person operation. Operating Instructions The specified gross weight is technically achievable; depending on the type of cargo, the actual gross weight may not be attainable within the permissible axle, drawbar, and kingpin loads. (Poor driving/trailing performance may result from incorrect load distribution.) Country of Registration/Plates Country of registration: Germany, with Dekra inspection and certificate (according to §13 EC - FGV), prepared for single-line number plate holder, contour marking with reflective tape pursuant to ECE R 048, white on the sides and red at the rear.

Stav: použitý, Ponuka obsahuje: - Rozširujúci modul pravý výstup CTK-100 Kodpfx Abjxwl Nco Sedg Horizon CTK-100 c-vežová výbava Doplnková funkcia: zoraďovanie v oboch smeroch - kompatibilné s: Horizon VAC-100a Horizon VAC-60Ha - Hmotnosť: 5,52 kg Na požiadanie vieme pre vás zabezpečiť: Balenie, nakládku, dopravu (loďou alebo lietadlom) vrátane colného odbavenia Vypracovanie leasingovej ponuky

Stav: použitý, Rok výroby: 2004, Horizon VAC-100m Suction-Air Collating Tower The VAC-100m is the ideal solution for print shops looking to expand their production capacities without having to invest in entirely new systems. Its easy integration with the VAC-100a tower and high reliability make it a valuable addition to your production line. Kedpexwla Usfx Ab Sjdg Key Features: Cost Efficiency: The VAC-100m is a cost-effective expansion solution as it operates without its own display and control unit. This reduces acquisition costs and enables you to expand existing systems economically. Expandable Capacity: With the ability to connect up to 5 VAC-100m towers to one VAC-100a tower, you can flexibly scale your collating capacity to up to 60 stations. This ensures efficient handling of large jobs and a significant increase in your production capacity. Reliability: Features such as misfeed, double-feed, and jam detection ensure that your production runs smoothly and without interruptions. Specifications: - Technology: Touch & Work (via VAC-100a) - Number of Stations: 10 per tower - Expandability: Up to 6 towers (60 stations) - Error Prevention: Misfeed, double-feed, and jam detection - Job Memory: 9 memory slots for repeat jobs - Programs: Double cycle (continuous operation), insertions (single and double), booklet mode, block mode, selective collating - Format: Max. 500x350 mm; Min. 148x120 mm - Paper Weight: 40–250 g/m² - Loading Capacity: 55 mm per station - Output: Up to 9,500 sets/h - Power: 230V; 50/60Hz – 1.86 kW - Dimensions: 842x652x1,961 mm - Weight: 310 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Opt for a used machine and benefit twice: do something good for the environment and your budget. Despite possible signs of use, you receive a high-quality product at an attractive price.

Stav: použitý, Radial drilling machine with platen table WEBO type HRH 100 / 3000 Machine no. 10009555/7 -- 1110185 -- 6046 Year of manufacture: 1979 Drilling capacity: Ø 100 mm in St 60 with 0.5 mm/rev feed Rated arm outreach: 3,000 mm Maximum arm outreach: 3,100 mm Spindle taper: MT 6 Spindle speed: 22.4 - 1,600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle to base plate: 970 - 2,335 mm Quill stroke: 325 mm Arm swivel range: 360° Travelling on bed, bed length: 7,500 mm Clamping surface of platen table: 8,000 x 2,100 mm - Electric central clamping - Drilling unit can be longitudinally moved on the machine bed via electric motor Kdjdpfxofbt Huo Ab Sjg - Platen table consists of 2 clamping plates with 7 T-slots each (length 4,000 x width 2,100 x plate thickness 360 mm) Required space (L x W x H): 8,000 x 4,550 x 4,300 mm Maximum height: 4,300 mm Transport height (bed with drilling machine): approx. 3,150 mm Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions platen table (L x W x H): 4,000 x 2,100 x 900 mm (2 plates stacked) Transport weight platen table: approx. 14 tons Good condition

Stav: použitý, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN Type PICOMAX 100-CNC 3 CNC Control: HEIDENHAIN TNC 155 Serial No.: 16186651 Year of manufacture: 1986 Spindle mount: FEHLMANN SF32 Drilling capacity: Ø 30 mm in steel Tapping capacity: up to M20 in steel Travel paths: X: 850 mm, Y: 435 mm Quill stroke (Z): 210 mm Vertical movement of milling head: 580 mm Feed rates X and Y: 1 to 8,000 mm/min Feed rate Z: 1 to 4,000 mm/min Rapid traverse X and Y: 8 m/min Rapid traverse Z: 4 m/min Table clamping area: 1,570 x 500 mm Distance spindle nose - table: 130 - 720 mm Kdedpfx Abehik Ezj Sjg Overhang spindle - column: 450 mm Spindle speed: 50 - 7,100 rpm, stepless Spindle drive: 10 kW Total connected load: 20 kW Power supply: 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled: X, Y, and Z quill adjustment - Hydro-mechanical tool clamping FEHLMANN SF32 - Thread cutting device - Cable remote control for machine operation and axis movements - Motorised vertical movement of the milling head, switch-off via adjustable cams - 3D probe RENISHAW, type MP 11F with FEHLMANN SF32 holder - 20 tool holders FEHLMANN SF32 - Swivelling tool holder with 21 tool stations - Coolant system integrated in the machine base - Control cabinet fixed to the machine - Documentation: operating instructions, CNC manual, and electrical diagrams Required space (L x W x H): 2,350 x 2,000 x 2,300 mm Weight: 3.2 t Very good condition

Stav: dielensky repasované (použité), Separátorová píla TS 100 c, s dopravníkovým pásom, odsávacím pásom a odsávaním. Dopravný pás aj pílový pás sú regulovateľné. Stroj má 4 prítlačné ramená, nové pojazdové kolieska a nové ložiská. Kompletný generálny servis stroja a nový lak. Priechodná šírka 600 mm. Ďalšie informácie na vyžiadanie. Kdedpfx Abefua Drj Sog

Stav: dielensky repasované (použité), Max. forming area: 960 x 660 mm Min. forming area: 210 x 170 mm Max. sheet size: 1000 x 700 mm Min. sheet size: 310 x 210 mm Max. sheet thickness, manual loading: 12 mm Max. sheet thickness, automatic loading: 10 mm Max. tool height: 490 mm Max. draw depth: 300 mm (positive/negative) Total power consumption approx.: 64.0 kW / 115 A Technical features: - Siemens Simatic S7-300 control, OP 37 panel - Air-conditioned control cabinet - Upper heating: 5 temperature control circuits using pilot radiators - Lower heating: 5 temperature control circuits using pilot radiators - Upper heating with individual radiator switching - Lower heating with individual radiator switching - Parallel clamping frame - Locking of upper reduction frames via pneumatic motor - Locking of lower reduction frames via cylinder - 4 cooling fans - Vacuum for lower table adjustable via cascade control - Pre-blowing/demoulding adjustable via cascade control - Large front opening for tool change - Film sag control by photocell with support air - Automatic tool change system Lower table: 1. Tool clamping via vacuum 2. Tool change via pneumatically actuated ball rollers Upper platen: 1. Motorized remote adjustment for stroke limitation 2. Pneumatic quick-release tool clamping system Sheet loading: - Automatic lifting of the film conveyor chain, motorized - With pneumatic quick-release system for suction plates - Motorized centering of plastic sheets - Separate vacuum pump for grained material Optional retrofit preheating: - Upper heating, pneumatically actuated, total field control, radiators can be switched on/off individually via toggle switch Ksdpfx Abowf Dvaj Sjdg - Lower heating, pneumatically actuated, total field control, radiators can be switched on/off individually via toggle switch - Temperature control for upper and lower heating via separate controllers in the machine's control cabinet (temperature setting not via UA operating panel) Optional retrofit for roll processing: - Cross cutter and feed rollers in feeder - Roll stand RO 800

Stav: dielensky repasované (použité), Horné vyhrievanie s malým samostatným žiaričom ovládaným kolískovým spínačom Spodné vyhrievanie veľkým žiaričom Horný lisovací systém Kedpfefug Anex Ab Ssdg Ochranná mriežka 4 chladiace ventilátory D05 Automatika predfúkania a vyberania z formy

Stav: použitý, Single-column Eccentric Press RASTER ZEULENRODA Model PDA 100 Year of manufacture: 1995 Pressing force: 100 tons Throat depth: approx. 360 mm Table size: 1200 x 710 mm Ram area: 900 x 500 mm Table opening: 400 x 120 mm Stroke adjustment: 6 to 82 mm Ram adjustment: 100 mm Installation height at max. stroke, ram at TDC: max. 469 mm Installation height at max. stroke, ram at BDC: max. 387 mm Stroke rate: 50–200 strokes/min Main drive motor power: 18.5 kW Electrical connection: 400 Volt, 50 Hz - Hydraulically operated multiple-disc wet clutch and spring-loaded safety brake - Infinitely variable drive via PIV gearbox with creep speed for automatic stroke adjustment and setup operations - Hydraulic overload protection in the ram - Press force and process monitoring via UNIDOR APS - Pneumatic, steplessly adjustable ram weight compensation - Roller feed MABU WE16, 160 x 3 mm, programmable feed length - Centralized grease lubrication - Operating manual and documentation for the press Included: Roller feed unit MABU Model WE16 Kedpfex U Eiaox Ab Sjdg Strip width: 160 mm Strip thickness: max. 3 mm Strip cross-section: max. 300 mm² Roll diameter: 63 mm Strip speed: 40 m/min - Side-mounted MABU feed control Space requirements for eccentric press (L x W x H): 270 x 240 x 350 cm Weight of the press: 13.5 tons

Stav: ako nová (výstavný stroj), Rok výroby: 2001, Predávam automatické CNC obrábacie centrum na výrobu blokových domov AUER BL100. Rok výroby: 2001. Vstupný stôl / Maximálna dĺžka prvku: 9,00 m Čapovacia fréza do Ø200 mm / 4 kW Horizontálna fréza do Ø200 mm / 4 kW Vertikálna fréza do Ø200 mm / 4 kW Automatický podávací systém Programovanie AUER Austria BL100MS Tlač etikiet Zebra Koncová kapovacia píla TOS Svitavy PWM 45.11 vzadu Vhodné pre drevostavby! Kedpfxerccake Ab Sedg Ihneď k dispozícii.

Rok výroby: 2015, Stav: pripravené na použitie (použité), celková hmotnosť: 8 500 kg, lisovacia sila: 102 t, Táto lisovacia jednotka Reis TUS 100-100 bola vyrobená v roku 2015. Robustný hydraulický lis ponúka menovitú silu 1 000 kN a pracuje s maximálnym hydraulickým tlakom 200 bar. S hmotnosťou približne 8 500 kg je navrhnutý na efektívne upínanie nástrojov a montážne aplikácie. Ak hľadáte vysokokvalitné lisy, mali by ste zvážiť stroj Reis TUS 100-100, ktorý máme na predaj. Kontaktujte nás pre viac informácií. • Hmotnosť rozvádzača: cca 200 kg Elektrické údaje • Napájacie napätie: 3 × 400 V AC / N / PE • Frekvencia: 50 Hz • Menovitý prúd: 35 A • Pripojené zaťaženie: 13 kVA Kdodpfx Abjya Di Uo Ssg Hydraulika • Max. hydraulický tlak (Pmax): 200 bar Pneumatika • Prevádzkový tlak: 5 bar

Stav: veľmi dobrý (použitý), Rok výroby: 2016, Arburg 570S 2200-290/100/100 / Production line with Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of manufacture: 2016 Injection Unit: Screw diameter: 35 mm Shot weight: 132 g Injection pressure: 2,000 bar Metering volume: 144 ccm Clamping Unit: Clamping force: 220 t Tie bar distance: 570x570 mm Platen size: 795x795 mm Kdjdpfxex Nhprj Ab Sog Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: 3-component high-speed injection moulding machine Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valves x 6 Hydraulic core pull, controlled via proportional valve x 4 Hot runner control Hardened injection unit – bimetallic Proportional valve on injection unit – precise injection Machine with dual cylinder / battery with compressed nitrogen (additional charge for high speed) Machine is designed for operation with an electric rotary table. The machine has an inverter to control the servo motor of the rotary table and an interface for table connection Parallel movements Screw diameter in vertical injection unit: ⌀25 mm – 45 g/PS Screw diameter in side injection unit: ⌀25 mm – 45 g/PS Robot Wittmann W823 Year of manufacture: 2015 5-axis robot: 3 axes electrically driven with servomotors; axis C and movement A Travel ranges in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt for additional price Dimensions: Weight: 10,830 kg Length/Width/Height: 5.53x1.77x3.29 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Arburg 520S 1600-290/100 / Výrobná linka s robotom Wittmann W823 / Prevádzkové hodiny: 20 181 h v automatickom režime Rok výroby: 09/2011 Vstrekovacia jednotka: Priemer skrutky: 35 mm Vstrekovacia hmotnosť: 132 g Vstrekovací tlak: 2 000 bar Dávkovací objem: 144 ccm Uzavieracia jednotka: Uzavieracia sila: 160 t Vzdialenosť medzi viazacími tyčami: 520x520 mm Rozmery upínacích platní: 695x695 mm Vysúvač: hydraulický Uzavieracia jednotka: hydraulická Riadenie: SELOGICA - dotyková obrazovka Doplnková výbava: 2K vstrekovací stroj s otočným stolom a robotom Veľmi dobrý technický stav Prevádzkové hodiny: 20 181 h v automatickom režime Celkový čas prevádzky: 28 473 h Euromap 67 Rozhranie pre robota Vzduchový ventil x 3 Hydraulický ťažný jadrový pohon, riadený proporcionálnym ventilom x 2 Zosilnené vstrekovacie jednotky – bimetal Proporcionálne ventily na vstrekovacích jednotkách – presné vstrekovanie Stroj s dvoma valcami / nádržami so stláčaným dusíkom (extra nabíjanie pre rýchlu prevádzku) Paralelné pohyby Priemer skrutky vo vertikálnej vstrekovacej jednotke: ⌀25 mm - 45 g/PS Originálny otočný stôl Kúpa otočného stola za príplatok Robot Wittmann W823 Rok výroby: 2015 5-osový robot: 3 osi poháňané servomotormi (elektricky); os C a pohyb A Pracovné dráhy osí: X-550, Y-1400 (teleskopická), Z-3500 Dotykový ovládací panel Bezpečnostný balík pre roboty Robot s adaptérom, ochranným krytom Kúpa robota za príplatok Rozmery: Hmotnosť: 6 720 kg Dĺžka/šírka/výška: 4,41 x 1,84 x 3,20 m Všetky ponúkané stroje sú pred predajom spustené našimi servisnými technikmi. K vybranému stroju je možné získať video z technického testovania alebo sa zúčastniť technických živých testov v našej spoločnosti v Łódźi. Kjdjx Nhnbepfx Ab Sjdg Cena: na vyžiadanie

Stav: veľmi dobrý (použitý), Rok výroby: 2007, Engel Insert 80V/80V/100 2F / 2-C tie-barless injection moulding machine, vertical / Excellent technical condition Year of manufacture: 2007 Kdsdpfxsx Nhiro Ab Ssg Injection Unit: Screw diameter: 2 x 25 mm Shot weight: approx. 49 g Injection pressure: 1214 bar Dosage volume: 54 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 0x0 mm (tie-barless) Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 Additional Equipment: Tie-barless machine with two vertical injection units, with rotary table Air valve x 6 Hydraulic core pull x 2 Control system with 12 hot runner zones Infrared safety curtains Thermoplastic and rubber injection units are available for this machine Rotary table diameter: 1200 mm The machine has been regularly serviced by authorised Engel service in Germany Dimensions: Weight: 9400 kg Length/Width/Height: 4.85x1.47x2.30 m Drive: Pump/motor: 30 kW All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection Unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosage volume: 168 cm³ Clamping Unit: Clamping force: 100 t Tie bar distance: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping system: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor driven by inverter – energy saving Built-in printer The machine was regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes are driven by servo motors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, protective enclosure Robot purchase at extra cost Kdsdpfxox Nhaqj Ab Sjg Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 2007, Battenfeld TM 100/525 Rok výroby: 2007 Vstrekovacia jednotka: Priemer skrutky: 40 mm Hmotnosť výstreku: 228,4 g Vstrekovací tlak: 2100 bar Dávkovací objem: 251 ccm Upínacia jednotka: Upínacia sila: 100 t Vzdialenosť medzi stĺpmi: 420x420 mm Rozmer upevňovacích dosiek: 640x640 mm Vypichovač: hydraulický Upínacia jednotka: kolenový mechanizmus Ovládanie: UNILOG B2 Prídavné vybavenie: Euromap 67 Rozhranie pre robota Hydraulický jadrový ťah x 1 Ovládanie s horúcimi kanálmi x 12 Vstrekovacia jednotka je odolná voči opotrebeniu a korózii Centrálne mazané Kedex Nhadjpfx Ab Sodg Automatické nastavenie výšky nástroja Rozmery: Hmotnosť: 3900 kg Dĺžka/šírka/výška: 4,46x1,33x1,78 m Pohon: Čerpadlo/motor: 18,5 kW Vyhrievací výkon: 12,1 kW Celkový výkon: 30,6 kW Všetky ponúkané stroje sú pred predajom uvedené do prevádzky našimi servisnými technikmi. Je možné získať video z technických skúšok vybraného stroja alebo sa zúčastniť technických živých skúšok v našej spoločnosti v meste Lodž. Cena: na vyžiadanie

Stav: veľmi dobrý (použitý), Rok výroby: 2014, Boy 100E / Hybrid Machine Year of manufacture: 2014 Injection Unit: Screw diameter: 32 mm Shot weight: 92.3 g Injection pressure: 2127 bar Metering volume: 96.5 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 430x360 mm Platen size: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: Procan Alpha 2 - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Control with air valve Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - for energy savings Dimensions: Weight: 3530 kg Length/Width/Height: 4.37x1.21x2.20 m Kdedex Ng S Eepfx Ab Sjg Drive: Pump/Motor: 15 kW Heating capacity: 7.7 kW Total power: 22.7 kW All machines offered are tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 2009, Arburg 370S 700-100/100 / 2K machine / Operating hours: 33,544 in automatic mode / Very good technical condition Year of manufacture: 2009 Kdsdpfx Abex Ng Rbj Sjg Injection unit: Screw diameter: 30 mm Shot weight: 65 g Injection pressure: 1,390 bar Dosage volume: 71 cc Clamping unit: Clamping force: 70 t Tie bar spacing: 370x370 mm Mounting platens size: 510x510 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: 2K machine Operating hours: 33,544 in automatic mode Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 2 Control with hot runner Reinforced injection units - bimetal Proportional valves on injection units - precise injection Parallel movements Vertical injection unit - screw diameter 20 mm (29 g/PS) Machine with cylinder / battery with compressed nitrogen (additional boost for fast operation) Machine with integrated Arburg conveyor belt and original sorting flap Option to purchase an original Weber rotary table Possible to change the screw diameter on both injection units to manufacturer-recommended diameters Dimensions: Weight: 4,440 kg Length/Width/Height: 3.48x1.58x2.97 m Drive: Pump/motor: 15 kW Heating capacity: 4.9 kW Total power: 19.9 kW All machines offered are started and tested by our service engineers prior to sale. It is possible to obtain a video of the technical testing of the selected machine, or to participate in live technical tests at our facility in Łódź. Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 2001, Arburg 320K 700-100 Year of manufacture: 2001 Injection unit: Screw diameter: 30 mm Shot weight: 59 g Injection pressure: 1550 bar Metering volume: 70 cc Clamping unit: Clamping force: 70 t Tie bar spacing: 320x320 mm Platen size: 476x476 mm Ejector: hydraulic Clamping system: toggle lever Control system: SELOGICA Additional equipment: Hydraulic core pull x 1 Injection unit hardened - bimetallic Central lubrication Original Arburg mold crane, 2 lifting speeds, load capacity 100 kg Dimensions: Weight: 2170 kg Kdodpfsx Ng Nqjx Ab Sog Length/Width/Height: 2.94x1.45x1.99 m Drive: Pump/motor: 11 kW Heating capacity: 4.9 kW Total power: 15.9 kW All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Arburg 370H 600-100 / Hybrid Machine Year of manufacture: 11.2011 Injection unit: Screw diameter: 30 mm Shot weight: 65 g Injection pressure: 1390 bar Dosage volume: 71 cm³ Clamping unit: Clamping force: 60 t Tie bar distance: 370x370 mm Platen size: 510x510 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valve x 3 Hydraulic core pull x 1 Control with hot runner system x 12 Injection unit hardened - bimetal Main machine motor – servo motor driven by inverter – energy-saving The injection unit is powered by a servo motor controlled by an inverter Machine equipped with cylinder / tank with compressed nitrogen (additional boost for rapid operation) Central lubrication Dimensions: Weight: 3190 kg Length/Width/Height: 3.68x1.45x2.04 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Kdodsx Ng Igspfx Ab Seg Price: On request

Stav: veľmi dobrý (použitý), Rok výroby: 1995, Arburg 370C 600-100 Rok výroby: 1995 Vstrekovacia jednotka: Priemer skrutky: 30 mm Vstrekovacia hmotnosť: 59 g Vstrekovací tlak: 1550 bar Dávkovací objem: 70 ccm Uzáverová jednotka: Uzavieracia sila: 60 t Vzdialenosť medzi tyčami: 370x370 mm Veľkosť upínacích dosiek: 570x570 mm Vyhadzovač: hydraulický Uzáverová jednotka: hydraulická Ovládanie: DIALOGICA Dodatočné príslušenstvo: Vzduchový ventil x 1 Hydraulický ťah jadra x 2 Kdsdpfx Asx Ng H Asb Sjg Rozmery: Hmotnosť: 3600 kg Dĺžka/šírka/výška: 4,30x1,59x2,08 m Pohon: Čerpadlo/motor: 11 kW Výkon ohrevu: 4,2 kW Celkový výkon: 15,2 kW Všetky ponúkané stroje sú pred predajom uvedené do prevádzky našimi servisnými technikmi. Je možné získať video z technických testov vybraného stroja alebo sa zúčastniť na technických testoch naživo v našej spoločnosti v Lodži. Cena: na vyžiadanie

Stav: veľmi dobrý (použitý), Rok výroby: 2004, Arburg 320C 500-100 / Výborný technický stav Rok výroby: 10.2004 Vstřikovací jednotka: Průměr šneku: 25 mm Vstřikovaná hmotnost: 45 g Vstřikovací tlak: 2000 bar Dávkovací objem: 49 ccm Uzavírací jednotka: Uzavírací síla: 50 t Rozteč sloupů: 320x320 mm Velikost upínacích desek: 446x446 mm Vystřikovač: hydraulický Uzavírací jednotka: hydraulická Ovládání: SELOGICA Doplňková výbava: Stroj je ve vynikajícím technickém stavu a byl používán pro testování vstřikovacích forem. Provozní doba: 25 739 h v automatickém provozu Celkový počet provozních hodin: 30 661 h Hydraulický jádrový tah x 1 Zesílené vstřikovací jednotky – bimetal Proporcionální ventil na vstřikovací jednotce – přesné vstřikování Vestavěný systém kontroly kvality tlaku značky Sensor Kistler – měření tlaku v nástroji Možnost výměny průměru šneku na menší nebo větší: 20 mm nebo 30 mm Rozměry: Hmotnost: 2300 kg Délka/šířka/výška: 3,18x1,47x1,99 m Pohon: Čerpadlo/motor: 15 kW Topný výkon: 4,9 kW Celkový výkon: 19,9 kW Všechny nabízené stroje jsou před prodejem odborně odzkoušeny našimi servisními techniky. Je možné získat video z technických testů vybraného stroje nebo se zúčastnit technických testů naživo v našem podniku v Lodži. Kdodpfx Ajx Ng Hcob Seg Cena: Na vyžádání

Stav: veľmi dobrý (použitý), Rok výroby: 1998, Arburg 270C 500-100 Rok výroby: 1998 Vstřikovací jednotka: Kdedpfex Ng Efjx Ab Sjg Průměr šneku: 20 mm Vstřikovací hmotnost: 26 g Vstřikovací tlak: 2500 bar Dávkovací objem: 31 ccm Uzavírací jednotka: Uzavírací síla: 50 t Rozteč sloupků: 270x270 mm Velikost upínacích desek: 446x446 mm Vystřikovač: hydraulický Uzavírací jednotka: hydraulická Ovládání: SELOGICA Dodatečné vybavení: Provozní hodiny: cca 50 000 h Euromap 12 Rozhraní pro robota Hydraulický jaderný tah x 1 Ovládání s horkými vtoky Vstřikovací agregát tvrzený – bimetalický Stroj je vybaven dalším ovládacím pultem – dálkové ovládání Stroj byl pravidelně servisován autorizovaným servisem Arburg Rozměry: Hmotnost: 2200 kg Délka/Šířka/Výška: 3,42x1,48x1,99 m Pohon: Čerpadlo/motor: 15 kW Topný výkon: 6,3 kW Celkový příkon: 21,3 kW Všechny nabízené stroje jsou před prodejem spuštěny našimi servisními techniky. Je možné získat video z technických zkoušek vybraného stroje nebo se zúčastnit technických živých testů v naší společnosti v Lodži. Cena: na dotaz

Stav: použitý, Temperovacia jednotka HB-Therm HB-100 U1, Temperovanie, Kvapalinové temperovanie, Priemyselné temperovanie, Termolátor, Použitý stroj Výrobca: HB-Therm Typ: HB-100 U1 Celkové rozmery: 200 × 650 × 500 mm Rok výroby: 2008 Technické údaje: Maximálna prevádzková teplota: 100°C Výhrevný výkon: 8 kW Kodex Emfwepfx Ab Ssdg Chladiaci výkon: 30 kW Prenosové médium: voda

Stav: použitý, Rok výroby: 1993, Pressure: 315 t Frame spacing: 2,350 mm Distance table/ram, max. stroke up, upper setting: 1,200 mm Frame spacing between cutting shock absorbers: 1,600 mm Distance table/ram, stroke up: 1,200 mm Stroke: 800 mm Table size: 2,060 x 1,260 mm Table height above floor: 750 mm Ksdpfovuugvsx Ab Sodg Cushion pressure in table: 100 t Cushion stroke in table: 400 mm Cushion area: 1,250 x 1,000 mm Side frame passage: 780 mm Ram area: 2,200 x 1,500 mm Ejector pressure in ram: 63 t Closing speed: from 500 mm/s Return speed: 310 / 410 mm/s Working speed: 20 - 73 mm/s Oil capacity: 3,900 l Drive power: 80.0 + 45.0 kW Weight: 55.0 t Space requirement (WxDxH): 4.6 x 2.7 x 7.2 m Height above floor: 6.0 m Height below floor: 1.2 m Approved for manual loading according to German accident prevention regulations (UVV) with oil-hydraulic drive, hydraulic cushion in table, hydraulic ejector in ram, hydraulic cutting shock absorption, hydraulic ram lock Can be offered either as is (partially dismantled, in need of overhaul) or alternatively overhauled and fitted with new Siemens S7-1500 F control system.