Kellenberger 600 U kúpiť použité (87)

Stav: veľmi dobrý (použitý), Okrúhla brúska Kellenberger 1000U s mnohým príslušenstvom za výhodnú cenu. Stroj je vo veľmi dobrom stave a plne funkčný. V roku 2019 bol zakúpený ako generálne opravený. Ledpfxjwkt Euo Ah Rohh Cena výrazne znížená!!!!!

Stav: generálne opravený (použitý), Rok výroby: 2025, Funkcionalita: plne funkčný, číslo stroja/vozidla: 1845/455, Completely overhauled: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. Newly painted. Workhead Disassembly, cleaning of parts, replacement of worn and defective components, replacement of motor, replacement of belts. New spindle bearings. Newly painted. Lsdpfx Ahsxt Ilfs Rehh Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, replacement of motor, replacement of belts. New spindle bearings. Newly painted. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the bracket and alignment of geometry. Newly painted. Hydraulics Disassembly, motor replacement, replacement of hoses, defective and worn parts replaced. Hydraulic block control. X-Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc.; overhaul of hydraulic piston; grinding of tables. Z-Axis Disassembly, grinding of tables, replacement of worn and defective components, overhaul of hydraulic piston, scraping of V and flat guides. Newly painted. Measuring system 2-axis digital display included Electrical cabinet Replacement of motor terminals and relay controls. New wiring. New speed inverter for the workhead. TECHNICAL SPECIFICATIONS Centre distance 1500 mm Centre distance including headstock and tailstock overhang 1650 mm Centre height, standard 125 mm Centre height with riser blocks 225/250 mm Max. grinding diameter Ø 250 mm Max. grinding diameter with riser blocks 450/500 mm Table Usable surface 2060x140 mm Max. length and width for surface grinding 1750x200 mm Longitudinal travel, manual or hydraulic 1750 mm Manual table feed, 1 handwheel revolution - coarse 20.006 mm Manual table feed, 1 handwheel revolution - fine 2.457 mm Table speed, continuously hydraulic -6 m/min Table swivel 6° Stop, return 0-5 sec. Work spindle Workpiece speeds, continuously variable electric 20-400 rpm Swivel 360° Internal taper of work spindle MT5 Tailstock Internal taper of tailstock spindle MT3 Manual or hydraulic spindle return travel 30 mm Dressing diamond internal taper MT0 Universal grinding head Transversal slide travel for wheel 285 mm Rapid wheel slide travel, forward and backward 40 mm Grinding spindle speeds 1500 – 1700 – 2200 – 3600 rpm Vertical travel of grinding spindle, centre height 125-330 mm Grinding wheel for cylindrical grinding, max. 400x50x127 mm Grinding wheel for surface grinding, max. 250x20x76 mm Grinding head swiveling with locking in 90° increments 270° Wheel feed One vernier division 0.005 mm/Ø Automatic feed, max. 0.9 mm/Ø Motors Grinding spindle motor 2,900 rpm / 4.0 hp Work spindle motor 3,000 rpm / 2.0 hp Coolant pump motor 2,850 rpm / 0.12 hp Internal grinding device Bore 70 mm Internal grinding spindle speed Ø70 mm 14,000 rpm Internal grinding spindle speed Ø50 mm 21,000 rpm Unless otherwise stated, technical data are provided without guarantee for errors or omissions.

Stav: použitý, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 125 mm - Table swivel range: ±8° - Universal wheelhead spindle Lhedjuhbx Tepfx Ah Reh - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speed: 1500 / 1700 / 2200 rpm - Wheelhead orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workhead orientation: 180° - Spindle speed: 20 - 400 rpm - Spindle internal taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Weight: 2500 kg ACCESSORIES - Automatic operation cycle (roughing, finishing, and return) - Counter center - Sine rule for workhead - UR head: 2 external and 1 internal grinding wheel - Coolant tank with pump - 1 internal grinding spindle SFJ UJ70: 14,000 rpm - Fixed diamond dresser on the tailstock - 1 four-jaw chuck - 1 magnetic chuck - 1 set of driving dogs - 2 steadies, two positions - Spacer for 175 mm height - Various wheel arbors - Various grinding wheels

Stav: použitý, Funkcionalita: plne funkčný, Na predaj je vysoko presná univerzálna a nástrojová brúska Strausak AG typ 57U. Vďaka svojej všestrannej konštrukcii s krížovým stolom je ideálna pre výrobu nástrojov, foriem a meradiel. Spoľahlivo zvláda aj náročné brúsenie vysoko tvrdených obrobkov (aj v rozsahu 60–65 HRC). Otáčky vretena sú flexibilne nastaviteľné a maximálna pozdĺžna dráha osi X je 600 mm pri maximálnej vzdialenosti hrotov 780 mm. Stroj je vo veľmi dobrom stave. Typ stroja: 57U Výrobné číslo (sériové číslo): 10686 Objednávkové číslo: 44137 Napätie: 380 V Lhodpfov E Ivfex Ah Reh Frekvencia: 50 Hz Technické parametre: Max. zdvih stola / pozdĺžna dráha (os X): 600 mm Maximálna vzdialenosť hrotov (dĺžka obrobku max.): 780 mm Výška hrotov: 125 mm – 175 mm (podľa podložiek na zvýšenie) Max. brúsny priemer: cca 348 mm Rozmery stola: 1 030 mm x 214 mm Naklápací rozsah stola: ±9° Hmotnosť stroja (netto): cca 2 500 kg (prepravná hmotnosť cca 2 700–2 800 kg) Čisté rozmery stroja (d x š x v): cca 2,30 m x 1,50 m x 1,50 m Odporúčaný priestor na umiestnenie: minimálne 3,50 m x 2,50 m Otáčky vretena: plynule/viacstupňové remene od 2 250 do 6 000 ot./min. Posuv stola: plynulo nastaviteľný od 0 do 16 mm/min Potrebujete kvalitný, ale cenovo dostupný stroj na obrábanie kovov pre vašu výrobu? Alebo chcete niektorý z vašich strojov predať? Pre viac informácií či kontaktujte nás prostredníctvom našej webovej stránky.

Stav: použitý, Rok výroby: 1995, Brúsiaci priemer 350 mm Brúsiaca dĺžka 1000 mm Výška stredov 175 mm Čiastočne repasovaný stroj s meracím protokolom podľa tolerancií nového stroja NOVÉ riadenie Eckelmann ENC s brusiacim softvérom BEMA Numericky riadená os B Lhodoyatx Sopfx Ah Reh Vnútorná brúsna jednotka priemer 80 mm Brúsny kotúč vľavo priemer 400 mm Brúsny kotúč vpravo priemer 300 mm Vnútorné brúsne vreteno HJN 828 Hydraulická koníková podpera Mikronastavenie Merací systém KEL SET

Stav: dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, číslo stroja/vozidla: 31.211.014, výška stredu: 225 mm, dĺžka brúsenia: 1 000 mm, priemer brúsneho kotúča: 400 mm, brúsený priemer: 500 mm, priemer obrobku medzi hrotmi: 500 mm, Kellenberger UR 175x1000 CNC Kelco 70, plne funkčný Zvýšenie zo 175 na 225 Výrobné číslo: 31.211.014 Rok výroby: 1987 Pripravené na vnútorné brúsenie Príslušenstvo: 1x príruba brúsneho kotúča vľavo 1x príruba brúsneho kotúča vpravo Lhedpfxsyyur Ij Ah Reh 1x špičkový oporník 1x magnet na obrobky 1x papierový pásový filter Bez záruky, reklamácie alebo vrátenia Voľné ihneď, zo skladu V prípade potreby je možné zabezpečiť dopravu

Stav: použitý, Rok výroby: 2000, Brúsny priemer 450 mm Brúsna dĺžka 1000 mm Výška hrotu 225 mm Stroj bol čiastočne repasovaný, dodaný s novou geometriou a bol v prevádzke len niekoľko týždňov, potom bol z dôvodu insolventnosti opäť predaný. Fotografia celého stroja je z takmer identického stroja. Fotografia vnútorného priestoru a vreteníka originálneho stroja. - veľká údržba - nová geológia stolu - čiastočné lakovanie vnútorného priestoru Brúsna kotúčová výbava ĽAVÁ 400x63x127mm (štandard) Brúsna kotúčová výbava PRAVÁ 300x40x127mm Zariadenie na vnútorné brúsenie Ø120 mm pre vysokofrekvenčné vretená CNC riadenie KELCO 120 C-os na neokrúhle brúsenie, Kel-Poly B-OS: CNC riadená B-os KELCO 120: v konštantná 35 m/s alebo 45 m/s Rýchlostná vysokofrekvenčná vnútorná brúsna vreteno Prevádzková jednotka pre MFV a MFZ vretená Ledjxzk Nijpfx Ah Rohh Hydraulický spätný chod pinoly pre koník BEZ mikro-nastavenia na koníku Pružinová vložka pinoly Chladenie nad stolom Štandardný vreteník obrobku MK 5 DIN 55026, veľkosť 5" MIKRO-nastavenie pre štandardný vreteník obrobku Zariadenie na orovnávanie pod stolom Aktívne pozdĺžne polohovanie KELPOS, MARPOSS, namontované na brúsnej hlave Systém merania nástrojov KELSET, MARPOSS Senzor nabehu MARPOSS Riadenie merania pripravené pre MARPOSS Minialsar Filtrácia papierovým pásom

Stav: použitý, Rok výroby: 1999, Brúsiaci priemer 350 mm Lodpfx Ahsy U N Hpo Rjhh Brúsiaca dĺžka 1000 mm Výška hrotu 175 mm Ovládanie FANUC 18i-TA GENERÁLNE OPRAVENÉ Fotka podobného už dodaného stroja - Brúsny kotúč VĽAVO 500 mm - Brúsny kotúč VPRAVO 400 mm - Vnútorné brúsne zariadenie 120 mm pre remeňom poháňané vnútorné brúsne vretená (štandard) - CNC riadenie FANUC 18i-TA - Pripravené na meraciu riadiacu jednotku Marposs kombinovanú (Minialsar, Positionar) s E5N - Os B - Kel-Set - Hydraulický spätný chod pinoly - Mikronastavenie na koníku - Hlavné vreteno s otočnou spodnou časťou

Rok výroby: 2015, stav: veľmi dobrý (použitý), On behalf of a customer from Switzerland, I am offering this machine for sale. It is in excellent condition with 5,200 operating hours. The machine was used for prototype manufacturing and is currently operational. Equipped with: - UR grinding head Ljdpfogtingox Ah Rohh - T1 500 x 80; T2 400 x 63 mm - 1 HF internal spindle MFM 1224/42 - 1 HF internal spindle MFM 1290 - Semi-automatic balancing unit - KEL-TOUCH at workpiece headstock for internal and external grinding - KELSET wheel measurement system - KELPOS longitudinal positioning system - Heidenhain CNC GrindPlus 640 - CNC B-axis, hydrostatic - CNC C-axis for polygon and thread grinding - KELSOFT NCG for non-circular grinding - KELTHREAD for thread grinding - KELREMOTE remote diagnostics - Prepared for measurement controls - Streuli 480 l paper band filter - Extraction unit Available at short notice, ex location Switzerland.

Stav: veľmi dobrý (použitý), s vnútorným brúsiacim zariadením Výška hrotov: 125 mm Vzdialenosť medzi hrotmi: 1000 mm Veľkosť stola: 1650 x 145 mm Brúsny kotúč: 400 x 50 x 127 mm Brúsny kotúč: 225 x 20 x 76,2 mm Otáčky brúsnych kotúčov: 1 500 – 2 200 ot/min Ljdpfx Ahey H Dq Hj Rohh Brúsna hlava otočná: 270° Rôzne príslušenstvo MARCELS MASCHINEN AG

Stav: veľmi dobrý (použitý), s vnútorným brúsnym zariadením Výška hrotu: 125 mm Vzdialenosť medzi hrotmi: 600 mm Brúsny kotúč: 400 x 40 x 127 mm Rôzne príslušenstvo Lhodpfsiu E Trex Ah Roh MARCELS MASCHINEN AG

Stav: generálne opravený (použitý), Stroj kompletně repasován S digitálním displejem Vzdálenost hrotů: 175 mm Mezihrotová vzdálenost: 1000 mm Brousicí kotouč: 400 x 50 x 127 mm + 225 x 20 x 76,2 mm Otáčky brousicího kotouče: 1 500–2 200 ot./min S vnitřním broušením Lsdpswhk Uujfx Ah Rshh Různé příslušenství MARCELS MASCHINEN AG

Stav: použitý, Rok výroby: 1997, Brúsny priemer 350 mm Brúsna dĺžka 1000 mm Výška hrotov 175 mm Hmotnosť stroja cca 6 t Predaj prebieha s funkčnou skúškou Na želanie s novou geometriou stola za príplatok Lhedpfx Ahjy R Ed Ns Rsh C-os na brúsenie polygónov B-os s ručným natáčaním Priemer brúsneho kotúča vľavo 400 mm Priemer brúsneho kotúča vpravo na vyžiadanie Zariadenie na vnútorné brúsenie Koník s jemným nastavením

Stav: použitý, Rok výroby: 1995, Brúsny priemer 350 mm Brúsna dĺžka 1000 mm Výška hrotu 175 mm Ovládanie Kelco 90 Hmotnosť stroja cca 6 t Predaj s funkčnou skúškou Lhodpsy R Ed Aefx Ah Rsh Nová geometria stola podľa požiadavky za príplatok Osa B plynulo nastaviteľná Priemer brúsnych kotúčov vľavo a vpravo 400 mm Zariadenie na vnútorné brúsenie Koník s jemným nastavením Sínusové pravítko na WSS Kel-Set Pasívne pozdĺžne polohovanie Movomatic TMP91

Stav: použitý, Rok výroby: 2026, Grinding diameter: 350 mm Lhodpfxey R Edvs Ah Rsh Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping device Internal spindle mount: 80 mm Total connected load: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m Completely overhauled and upgraded to the latest technology. - New control cabinet - Modern hydraulic unit - Modern workhead - Modern tailstock with fine adjustment - Modern control block, infeed, gearbox - Internal grinding attachment for spindles with 80 mm diameter - Swivel angle display for grinding headstock - Grinding angle display on upper table - Pneumatic lift-off for the upper table - Tailstock with fine adjustment - Sine ruler - Stepless grinding spindle speed control 70–100% - Stepless internal grinding spindle speed control 70–100% - Optional conversion to separate internal grinding spindle drive with cooling and continuously adjustable internal spindle speed 0–100% - Splash guard doors for Z-axis Options: Swivel angle display for workhead Swivel angle display for grinding headstock Swivel angle display for upper table Partial enclosure on X-axis as well as special requests

Stav: použitý, TECHNICKÉ ÚDAJE - Výška hrotov: 320 [mm] Lhodpfsyn R I Tox Ah Roh DRŽIAK BRÚSNEHO KOTÚČA - HLAVA VRETENA - Rozmery ľavého brúsneho kotúča: 400 x 50 x 127 [mm] - Rozmery pravého brúsneho kotúča: 225 x 20 x 76,2 [mm] - Výkon: 3 [kW] - Otáčky vretena: 3000 [ot./min.] - Orientácia držiaka brúsneho kotúča: 270 [°] DRŽIAK OBROBKU - HLAVA VRETENA - Orientácia držiaka obrobku: 360 [°] - Otáčky vretena: 20 - 400 [ot./min.] - Vnútorný kužeľ vretena: Morse 5 - Výkon: 0,9 [kW] ELEKTRICKÉ NAPÁJANIE - Napájacie napätie: 380 [V] PRÍSLUŠENSTVO - Automatický pracovný cyklus (polotovar, dokončenie a návrat) - Displej Heidenhain - Nádrž na chladiacu kvapalinu * s papierovým filtrom - 1 vnútorné brúsne vreteno: 12000 [ot./min.]

Stav: použitý, TECHNICKÉ ÚDAJE - Výška středu hrotu: 125 mm - Max. délka broušení: 430 mm - Max. průměr obrobku: 249 mm - Max. hmotnost obrobku: 100 kg - Rozměry brusného kotouče: Ø400 x 63 x 127 mm - Otáčky vřetene unašeče obrobku: 8 - 800 ot/min - Max. pojezd osy X, Z: 320 , 650 mm Ledpfx Aey Tb Aash Rshh - Prostorové nároky: 2500 x 2000 mm - Hmotnost stroje: 4700 kg PŘÍSLUŠENSTVÍ - CN FANUC 18iTA - Koník s jemným nastavením - Brusná hlava typ URS - Orientace brusné hlavy po 0,1° - Vnitřní brousicí jednotka se vřetenem Ø120 mm FISCHER Typ MFZ-1090 90000 ot/min a typ MFV-1230 12000-30000 ot/min - Různé upínací příruby na brusné kotouče - Vytlačovač brusného kotouče - 2 jemné orovnávací zařízení pro vnější a vnitřní kotouče - Boční měřicí sonda MARPOSS Kel-pos - Zařízení Kel-pos - Měřicí systém Kel-pos - Tříčelisťové sklíčidlo

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Lhodjd Ih Dvspfx Ah Reh Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workhead swivelling range: 360° Grinding spindle head swivelling range: 180° +/- Grinding spindle speed: 1,500, 1,700, 2,200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight (chucked): 130 kg incl. clamping fixture Internal spindle fit: 80 mm Total power requirement: 6.5 kW Machine weight approx.: 2.9 t Space requirement approx.: 5.6 x 2.0 m As a world-leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new quality with warranty, but also offer comprehensive service for your machines. Geometrically overhauled and newly painted, with original electrics but new WSS drive and controller in three-phase technology. Optionally available with splash guard doors and X-axis enclosure. - Digital display in two axes. X-axis resolution 0.5µm Available options at extra charge: - Upper table swivel angle display - Encoder with digital display in the workhead - Encoder with digital display in the grinding spindle head (no vertical adjustment possible with spindle) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increased centre height up to a maximum of 225 mm Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently meet the essential safety and protection requirements as specified in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum safety requirements.

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,500 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±6° Table longitudinal travel: 1,750 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight – overhung: 130 kg incl. clamping Internal spindle mounting: 80 mm Total connected load: 6.5 kW Machine weight approx.: 2.9 t Required floor space approx.: 5.6 x 2.0 m Geometrically overhauled and newly painted. Photos show a similar 1,000 mm machine. Includes: - New electrical cabinet - Modern workpiece headstock from Advance model - New workpiece spindle drive - Modern hydraulic unit - Air lift grinding headstock Ledpfxod Ih Dwo Ah Rohh - Modern internal grinding attachment - Operating tools Upper table swivelling extension to 10° Options: - Upper table swivel angle display - Workpiece headstock swivel angle display - Grinding headstock swivel angle display - Splash guard door for Z-axis - Splash guard enclosure for X-axis etc. ADDITIONAL SERVICES: - Machine servicing - Grinding technology consulting - Operator training - Spare parts - Accessories

Stav: použitý, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m As the world’s leading company in the field of Kellenberger overhauls and retrofits, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measuring protocol - New, service-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA grinding software - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B axis) Standard Equipment: - Workheadstock with Morse taper MK5, optional MK5/short taper adapter - Tailstock with MK4 taper. Optionally with fine adjustment - Grinding spindle head T1/T2/T3 - T1 grinding wheel diameter 400 mm - T2 grinding wheel diameter 300 mm - T3 internal grinding attachment, belt-driven by grinding spindle motor - Grinding spindle motor 4.4 kW - High-resolution B axis - Marposs measurement system for grinding wheel measurement Lhsdouwv H Tspfx Ah Rsh - Longitudinal positioning Marposs - GAP control (sensor on the grinding spindle head) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at additional cost: - HF internal grinding spindle - Ultra-precise, highly torsion-resistant workpiece headstock - Measurement control - Extraction unit - Paper band filter Control: Basic grinding cycles - Workpiece zeroing with Z-position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Infeed sensor GAP - Dressing diamond measurement - Corrections - External and internal cylindrical grinding (plunge and traverse grinding) - External and internal taper grinding (B-axis swiveling, dressing with straight wheel) - External and internal radius grinding (radius dressed on wheel) Optional grinding cycles - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angles - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stav: použitý, Grinding diameter: 250, 350, 450 mm Grinding length: 1,000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Lhjdpfjd Ih D Hjx Ah Rjh Grinding spindle speed: 1,500, 1,700, 2,200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table movement: 1,300 mm Table feed rate: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Photo shows similar machine with 225 mm centre height Version R: Machine equipped with central lubrication and roller guideway in the X-axis flat guide, as well as air lift in the grinding headstock. - Digital display on 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital readout on workpiece headstock - Rotary encoder with digital readout on grinding headstock (height adjustment by spindle not possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm, with height adjustment - Increase of centre height to max. 225 mm - Variable speed control for grinding spindle Includes: - Operating tools - Clamping sleeve for chuck Further accessories available on request. The machine tool currently does not meet the basic safety and protection requirements as specified in the German Industrial Safety Regulation (BetrSichV 2015). A risk assessment pursuant to BetrSichV is required to determine whether the minimum safety objectives can be increased accordingly.

Stav: použitý, Priemer brúsenia 350 mm Dĺžka brúsenia 1000 mm Výška hrotov 175 mm Potrebný priestor cca 3,6/3,5 m Ako celosvetovo vedúca spoločnosť v oblasti generálnych opráv/retrofitov Kellenberger zabezpečujeme nielen dodávky strojov v kvalite nového stroja so zárukou, ale ponúkame aj servis pre Vaše stroje: Rad Kellenberger Kel-Varia so systémom riadenia Kelco 90. Mechanická generálna oprava: - Kompletná generálna oprava stroja podľa testovacieho protokolu Kellenberger - Nová servisne priateľská kabína - Nové lakovanie Elektrická generálna oprava: - Nové, moderné CNC ovládanie brúsok na guľato s rozhraním BEMA - Nový rozvádzač - Nová pohonná technika - Výmena všetkých elektrických vedení, tlakových spínačov Berus atď. - Nové absolútne sklenené odmeriavacie pravítka v osiach X a Z - Nový absolútny rotačný snímač (pre B-os) Štandardná výbava: - Pevný koník s kužeľom MK5, voliteľne s adaptérom MK5/krátky kužeľ Lhedpfx Ahjuwv H Hs Rsh - Otočný koník s kužeľom MK4, voliteľne s jemným nastavením - Brúsne vretená T1/T2/T3 - T1 - priemer brúsneho kotúča 400 mm - T2 - priemer brúsneho kotúča 300 mm - T3 - zariadenie na vnútorné brúsenie, pohon cez brúsny motor remenom - Brúsny motor 4,4 kW - B-os s vysokým rozlíšením - Merací systém Marposs pre meranie brúsnych kotúčov - Pozdĺžne polohovanie Marposs - GAP Control (senzor na brúsnom vretene) ELASO integrované do systému riadenia - Polautomatické vyvažovanie ELASO integrované do systému riadenia - BEMAT meranie brúsnych kotúčov Voliteľná výbava za príplatok: - Vysokofrekvenčné vnútorné brúsne vreteno - Vysoko presný, maximálne tuhostný vreteník obrobku - Merací riadiaci systém - Odsávanie - Pásový papierový filter Ovládanie: Základné brúsne cykly: - Nulovanie obrobku s pozíciou Z (pozdĺžne polohovanie) - Meranie brúsneho kotúča s BEMAT - Senzor priblíženia GAP - Meranie diamantov na orovnávanie - Korekcie - Vonkajšie a vnútorné valcové brúsenie (kyvné a priečne brúsenie) - Vonkajšie a vnútorné kužeľové brúsenie (naklápanie B-osy, orovnávanie s rovným kotúčom) - Vonkajšie a vnútorné rádiusové brúsenie (rádius orovnaný na kotúči) Voliteľné brúsne cykly: - Profilové priečne brúsenie vonkajšie a vnútorné s profilovým kotúčom - Profilové brúsenie vonkajšie a vnútorné s rovným kotúčom - Jedno a viacchodové vonkajšie a vnútorné závitové brúsenie s voľne voliteľným uhlom bokov - Brúsenie trapézových závitov - Neokrúhle/brúsenie mimo osy vonkajšie a vnútorné Cena 15 000 €

Stav: použitý, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Lhodpfx Ahouxftrs Roh Grinding spindle speeds: 1500, 1700, 2200 rpm Infeed per stroke: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swivelling: ±6.5° Longitudinal table travel: 1530 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg incl. chucking Max. cross travel: 270 mm Internal spindle mount: 80 mm Tailstock sleeve taper: MK3 Sleeve travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space required approx.: 4 x 2 m Overhauled to Kellenberger standards Including new, modern, and future-proof CNC control system. Photo shows a previously delivered machine with special options. - Operation via touch panel is exceptionally user-friendly. - The symbols on the control panel are practically identical to the original controls, eliminating the need for retraining. - Diagnostic function with PLC status and digital I/O display. - Dressing function can be expanded or modified upon customer request. - Workpiece spindle stop in angular position available on request. - New maximum infeed amount 40 mm, can be further increased on request. - Digital position display in 2 axes. Resolution X-axis 0.5 μm. Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (height adjustment with the spindle not possible) - New sturdy internal grinding attachment, diameter 80 mm or 100 mm - Increase of centre height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic longitudinal and rapid traverse movement of the table. Versatile application possibilities in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Gauging control This machine tool does not currently meet the essential safety and protection requirements as defined in the BetrSichV 2015 workplace safety regulation. The required minimum protection level must be determined through a risk assessment in accordance with BetrSichV.

Stav: použitý, Rok výroby: 2002, Grinding diameter: 450 mm Grinding length: 1,500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT: - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor, water-cooled, 9.8 kW - Marposs tool measuring system - Active longitudinal positioning - Kel-Set - GAP sensor (contactless by ELASO) at T1 and T2, integrated in the control interface - GAP at T3/T4 via fluid sensor - Semi-automatic balancing by ELASO for T1/T2, integrated into the control interface - Tailstock hydraulic, with fine adjustment +/-150 μm - Dressing device on the lower table, workpiece spindle side - Dressing device on the lower table, tailstock side - Dressing device on the upper table - New, service-friendly and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle headstock with direct drive *Strongly recommended for non-circular grinding *Workpiece weight (chucked): max. 75 kg *Workpiece weight (between centres): 150 kg *Water-cooled *MK5 combined with short taper mounting DIN 55026 *Oriented spindle stop *Fixed lower part B-axis with direct drive, centre height 225 mm *Extremely torsion-resistant *High positioning accuracy *Resolution: ° *Water-cooled MECHANICAL RETROFIT: - Complete overhaul according to Kellenberger measuring protocol - Newly painted Hydraulics unit new: - Improved temperature control (oil cooler) - Energy saving: only one pump, not running continuously - Pressure monitoring - Monitoring of water content in hydrostatic oil (Early detection of bellows damage) Hydrostatic leadscrew in X: - Wear-free due to no contact during operation - No loss of accuracy, even under continuous full load at max. speed - Frictionless at low speeds - No stick-slip effect at low speeds Lodpfx Aouxfu Neh Rehh - Precisely transmits even the smallest rotational movements - No backlash in case of change in rotational direction - No fluctuation in friction torque due to ball circulation - Higher axial rigidity than ball screws - Significantly better damping, leading to improved surface finish and tool life - No vibrations from ball return - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor, higher accuracy, significantly lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling capacity needed compared to linear motors ELECTRICAL RETROFIT: - New, modern CNC CYLINDRICAL GRINDING MACHINE controller with BEMA grinding interface - Completely new electrical cabinet - New drive technology - Replacement of all wiring, pressure switches, etc. - New absolute glass scales on X and Z axes - New absolute rotary encoder (for B-axis) CONTROL SYSTEM: The grinding software consists of a base license and various options available depending on the machine's configuration. Software base: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on wheel) - Semi-automatic oscillation grinding - Workpiece...

Stav: použitý, Grinding diameter 250, 350, 450 mm Grinding length 1000 mm Center height 125, 175, 225 mm Grinding wheel diameter 400 mm Grinding wheel width 50 mm Bore 127 mm Workpiece spindle taper MK5 Workpiece spindle speed 20–400 rpm Workpiece headstock swiveling 360° Grinding spindle head swiveling 180 + - ° Grinding spindle speed 1500, 1700, 2200 rpm Plunge (per stroke) 0.001–0.030 mm/Ø Continuous infeed 0–0.95 mm/Ø Table swiveling ±8° Table longitudinal travel 1300 mm Table speed 0.02–6 m/min Workpiece weight between centers 130 kg Workpiece weight max. (overhung) 130 kg incl. clamping equipment Internal spindle mount 70 mm Total power requirement 6.5 kW Machine weight approx. 2.5 t Space requirement approx. 4.2 x 2.0 m As the world's leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver machines in as-new condition and with warranty, but can also provide service for your machines—recently delivered equipment supplemented with additional options such as: Ljdouxftxepfx Ah Rohh - Splash guard doors - X-axis enclosure - Grinding spindle head swivel angle indicator Available at a surcharge. Geometrically overhauled and newly painted with original electrics. The machine is equipped as standard with central lubrication and roller guide in the X-axis flat slideway as well as air lift-off in the grinding spindle head. - Digital display in 2 axes. X-axis resolution 0.5 μm Options: - Rotary encoder with digital display for the workpiece spindle head - Rotary encoder with digital display for the grinding spindle head (no height adjustment with spindle possible) - New heavy-duty internal grinding unit, diameter 80 mm or 100 mm, with height adjustment - Increase in center height to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine tool does not currently meet the fundamental safety and protection requirements specified in BetrSichV 2015. Raising the required minimum protection level must be established by means of a risk assessment in accordance with BetrSichV.