Mep Cobra 350 kúpiť použité (121)

Stav: dobrý (použitý), Rok výroby: 2002, Automatická pásová píla MEP Model: Shark 320 AXI Rok: 2002 Kapacita okrúhla: 260 mm Kapacita pri 45 / 60 stupňoch: 230 mm / 150 mm Kapacita štvorcová: 320 x 220 mm Hodpfsw Na T Usx Agusfn Rýchlosť: 40 - 80 m/min

Stav: dobrý (použitý), Rok výroby: 1995, Funkcionalita: plne funkčný, celková výška: 750 mm, celková dĺžka: 450 mm, celková šírka: 450 mm, Pásová píla – podstavec s prednými dvierkami Farba RAL 6011 machovo zelená Hfodpfsvzak Hsx Aguon

Stav: dobrý (použitý), Rozsah rezania okrúhlej ocele pri 45°: 250 mm, Rozsah rezania okrúhlej ocele pri 90°: 280 mm, rezacia výška (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity at 45º: 250 mm round 250 mm square Saw blade speed: 40/80 m/min Saw blade dimensions: 3,320 x 27 x 0.9 mm Mitre angle: 0 - 60º Equipped with: Hfedott Nd Rjpfx Agusn - Coolant system Country of origin: Italy Motor power: 1.8 kW Machine weight: 700 kg Machine dimensions (LxWxH): 190 x 120 x 135 cm

Stav: nový, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models available on request! Motor power: 1.5/1.8 kW Vise opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 485 kg Blade speed: 36/72 m/min Cutting capacity 0°: 250 / 220x220 / 280x220 mm Cutting capacity 45° right: 230 / 200x200 / 220x200 mm Hfsdpfxecgbq Ij Agusn Cutting capacity 45° left: 200 / 170x170 / 200x140 mm Cutting capacity 60° right: 120 / 80x80 / 140x80 mm Cutting capacity 60° left: Description The MEP SHARK 282 SXI EVO electrohydraulic semi-automatic bandsaw, with semi-automatic dynamic and manual operation, features a MEP-28 control unit for mitre cuts from 45° right to 60° left. Semi-automatic function: At the start of the cycle: - Vise closes and motor starts – Saw head lowers to perform the cut – Motor stops – Saw head raises – Vise opens. Semi-automatic dynamic system (manual lowering of the saw head to the desired position and cycle start via push button). Key features: - New centralized control console on an articulated arm, allowing the operator to access controls from any working position. - Low-voltage control panel: - Polyester membrane keypad with thermoformed raised buttons and control indication signal. - Display for: * Diagnostic messages in the user’s language * Alarm messages with error descriptions * Status of inputs and outputs * Cut counting * Time used for each cut * Blade motor current * Blade tension * Blade speed * Numeric indication of head position - IP55 rotary handle for manual 24 V cycle operation - Full program of special cutting cycles - Additional special cutting cycles available for bespoke applications - Latest-generation hydraulic control unit, highly efficient with low energy consumption - Large work surface with turntable on rolling bearings, 265 mm diameter with preloaded thrust bearing, mounted - Dual blade speed (36/72 m/min) with controls - Prepared for installation of electronic inverter for stepless speed adjustment from 20 to 90 m/min - Saw head stroke programmable directly from the control panel to match cutting material - Side-adjustable clamping mechanism with rapid-action vise - Manual blade tension control with screen display using electronic transducer - Base with extractable coolant tank - Electric coolant pump for cooling and lubrication of the blade - Ready for installation of minimum-quantity lubrication unit for the blade (optional), in addition to standard emulsion-oil lubrication - Swarf removal brush - Machine designed for pallet truck handling - Length stop for repetitive cuts - Material support arm with roller for mounting loading table - Bimetal saw blade for solid and profile materials - Tools and operating manual provided in the user’s language For further technical details, please refer to the attached PDF document.

Stav: použitý, Radiálny ventilátor, odsávací ventilátor na triesky, ventilátor, odsávacie zariadenie, odsávacia jednotka na prach, ventilátor na triesky, odsávacie zariadenie - Výrobca: MEP, odsávacie zariadenie s transportným podvozkom - Typ: žiaľ bez označenia typu - Motor: Cantoni 0,75 kW / 2840 ot/min Hsdeh Szarepfx Agusfn - Podvozok: na kolieskach - Rozmery: 950/480/V1860 mm - Hmotnosť: 40 kg

Stav: použitý, Rok výroby: 2009, Funkcionalita: plne funkčný, For sale is a used, fully functional semi-automatic miter band saw machine. Cutting capacities: Hfjdpewigavsfx Agusn 0° 330 mm | 320 mm | 450 x 320 mm +45° 320 mm | 300 mm | 300 x 300 mm +60° 210 mm | 200 mm | 200 x 200 mm -45° 320 mm | 300 mm | 300 x 300 mm -60° 210 mm | 200 mm | 200 x 200 mm Maximum vice opening: 455 mm Blade dimensions: 4500 x 34 x 1.1 mm Saw blade motor power: 4.0 kW – three-phase Blade speed: 15 ÷ 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Stav: veľmi dobrý (použitý), prevádzkové hodiny: 1 170 h, MEP automatická pásová píla Model: Shark 310 AX Kapacita kruh: 230 mm Kapacita obdĺžnik: 310 x 220 mm Rozmer pásu: 2850 x 27 x 0,9 mm Prevádzkové hodiny: 1170 Veľmi dobrý stav Hjdpfx Agow Hy Hkouefn

Rok výroby: 2003, Stav: použitý, Výkon rezu – kruh: 300 mm Rozmery pílového pásu: 3320 x 27 x 0,9 mm Výkon rezu – obdĺžnik: 330 x 260 mm Výkon rezu – štvorec: 260 mm Ovládanie: evolution Pracovná výška: 870 mm Rýchlosť pílového pásu: 40 / 80 m/min Hjdpfx Aora Rrljguefn Hmotnosť stroja: cca 1050 kg

Rok výroby: 1990, Stav: dobrý (použitý), číslo stroja/vozidla: 22177, Číslo článku: MA1154 Výrobca: Mep Typ: Cobra 350 MA Rok výroby: 1990 Výrobné číslo stroja: 22177 Dĺžka [mm]: 1100 Šírka [mm]: 1000 Hodpfoirud Dsx Agusfn Výška [mm]: 1800 Hmotnosť [kg]: 350 Pripojovací výkon: 380 V Priemer pílového kotúča: 350 mm Výbava: Pokos 45 stupňov

Stav: nový, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Article number: SH281CCS Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 375 kg Speed: 36/72 m/min. Cutting capacity at 0°: 250 / 230x230 / 280x200 Cutting capacity at 45° right: 190 / 180x180 / 180x180 Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: - Saw frame, vice assembly and base made of robust cast iron - Precision angle marking on the cast iron frame - Electrical system (with clearly labeled wiring and 24 V low voltage circuit) - IP 55 switch handle for manual operation (if present) - Rotating chip brush for blade cleaning - Quick approach vice locking unit - Precision stops adjustable for miter cuts at 0°, 45°, and 60° left - Bi-metal saw blade 2950 x 27 x 0.9 mm - Tools, user manual, and spare parts ordering instructions available in the user's language - SHARK 281 available as manual version, and SHARK 281 CCS as manual operation plus cut cycle with automatic head descent by self-weight. - CCS (Cut Control System) with (A switch for manual or automatic cut - B) adjustable cutting speed - C) hydraulic brake with reservoir - D) end stop for blade run-off); also available as retrofit for existing machines. - Quick-release vice adjustment - Hydraulic transducer for blade tension indication - Electric coolant pump for blade cooling and lubrication, with accessible coolant tray in the machine base - On versions with pneumatic vice (MA), opening and closing is by manual valve (optional foot pedal control available) MEP SHARK 281 SXI evo [Semi-automatic] Article number: SH281SXI Motor power: 1.5/1.8 kW Vice opening: 285 mm Blade dimensions: 2950x27x0.9 mm Weight: 435 kg Speed: 36/72 m/min. Cutting capacity at 0°: 250 / 230x230 / 280x200 Cutting capacity at 45° right: 190 / 180x180 / 180x180 Cutting capacity at 45° left: Hfsdpecgbp Ijfx Agusn Cutting capacity at 60° right: Cutting capacity at 60° left: Description Semi-automatic function: The vice closes and the motor starts, the saw head descends for the cut, the motor stops, the saw head raises, and the vice opens automatically. Key features: - New centralized control panel on articulated arm - Latest generation hydraulic control unit: high performance with low power consumption - Machine base with pull-out coolant tank The machine is fully compliant with CE regulations! For additional technical data, please refer to the attached PDF document.

Stav: nový, Cutting diameter: 250 mm Saw band length: 2950 mm Cutting width: 280 mm Saw band dimensions: 2950 x 27 x 0.9 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (flat): 110 x 110 mm Cutting capacity at 60° (square): 110 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.4 t Hfsdpfxsppgdde Aguon High-performance mitre band saw for cuts from 0° to 60° left CCS (CutControlSystem) for automatic cutting. (Infinitely variable feed adjustment and automatic shut-off at end of cut) Description: - Manual cutting cycle - AUTOMATIC CUTTING: (via selector switch) with infinitely variable adjustment of lowering speed and adjustable cutting pressure via compensation spring - Robust, torsion-resistant and low-vibration saw frame made of cast steel - Quick-release vice - Carbide blade guides for maximum cutting precision - Large, adjustable cast steel band wheels - Hydraulic unit for saw band tensioning and monitoring with display on manometer (band tension = 900 kg) - Clearly arranged control panel with all controls - Electric coolant pump for cooling and lubricating the saw blade - Chip removal brush for cleaning the saw blade

Stav: dobrý (použitý), Rok výroby: 1998, priemer pílového kotúča: 300 mm, Na predaj je MEP Tiger 300, vysokokvalitná kotúčová píla na obrábanie kovov. Tento stroj bol vyrobený v roku 1998, avšak je vo veľmi dobrom stave. Je ideálny pre dielne a výrobné prevádzky, ktoré vyžadujú spoľahlivé a presné riešenie pre rezanie. Vlastnosti stroja: Výrobca: MEP (Mecchia Eredi Pio) Model: Tiger 300 Rok výroby: 1998 Typ píly: polautomatická/manuálna kotúčová píla Priemer pílového kotúča: 300 mm Kapacita rezu: vhodná na guľatiny, štvorcové profily a šikmé rezy Hfodpfx Agov Tlcrouon Uhol rezu: 90° a 45°, možnosť šikmých rezov na obe strany Materiály: ideálna na rezanie železa, ocele a iných kovov Stav: dobrý stav Chladenie: integrovaný chladiaci systém pre vyššiu kvalitu rezu a dlhšiu životnosť pílových kotúčov

Stav: dobrý (použitý), Rok výroby: 2021, MEP AVT400 Uzatvárací stroj Hfsdpfx Asu S Rk Hjgusn Sériové číslo: 271221 Rok výroby: 2021, nerezový uzatvárač, robustný a jednoducho ovládateľný uzatvárací stroj vhodný na aplikáciu ROPP a skrutkovacích uzáverov na fľaše so závitovým hrdlom. Maximálny priemer fľaše: 195 mm, maximálna výška fľaše: 355 mm, kapacita až 400 – 600 fliaš za hodinu, mobilné vyhotovenie, jednofázový (1Ph) napájací zdroj.

Stav: použitý, MEP 40 End Straightening and Cutting Bench Number of bars: - 1x Ø 40 mm - 2x Ø 32 mm - 3x Ø 26 mm - 4x Ø 20 mm Hodpjvtx Eyofx Aguefn - 5x Ø 16 mm 22 Fy = 600 N/mm² – ft = 650 N/mm² Minimum cutting length: 800 mm Maximum length: 12,000 mm Measurement tolerance: +/- 1 mm/m Maximum positioning speed: 2 m/s Ejection speed for measured pieces: 2.2 m/s Number of bins: 5 + 5

Stav: nový, MEP Band Saw SHARK 331-1 NC 5.0 Spider All MEP models available on request! Motor power: 2.2 kW Vice opening: 340 mm Blade dimensions: 3650x27x0.9 mm Weight: 1,240 kg Infinitely variable cutting speed: 15 - 100 m/min Cutting capacity at 0°: 280 / 260x260 / 330x260 mm Cutting capacity at 45° right: 260 / 250x250 / 270x200 mm Cutting capacity at 45° left: Hfjdpfechhdiex Aguon Cutting capacity at 60° right: 180 / 170x170 / 170x170 mm Cutting capacity at 60° left: Description: - Fully automatic hydraulic band saw - Mitre cuts up to 60° to the left possible - Saw blade length: 3650x27x0.9 mm - Single stroke: 600 mm (programmable up to 10 m) - Simple touchscreen operation - Saw arm made of spheroidal graphite cast iron – robust and stable - Required floor space: 3.4 m² - Footprint: 1900 mm wide x 1800 mm deep For further technical data, please refer to the attached PDF document.

Stav: nový, MEP SHARK 230-1 NC HS 5.0 dvojstĺpová pásová píla na kov Číslo produktu: SH230-1NCHS Výkon motora: 2,2 kW Rozpätie čeľustí: 235 mm Rozmer pásu: 2950x27x0,9 mm Hmotnosť: 1 000 kg Rýchlosť: 15 - 100 m/min, plynule nastaviteľná Rezné rozmery pri 0°: 230 / 230x230 mm Rezné rozmery pri 45° vpravo: Rezné rozmery pri 45° vľavo: Rezné rozmery pri 60° vpravo: Rezné rozmery pri 60° vľavo: Popis: SHARK 230-1 NC 5.0, plne automatická elektrohydraulická dvojstĺpová pásová píla s poloautomatickým a plnoautomatickým režimom. Maximálna dĺžka zvyškového kusu: 70 mm. Zväzkové rezy: 230 x 230 mm. Numericky riadený stroj s novým riadiacim systémom MEP 50 na báze Windows. Posuv materiálu krokovým motorom cez guľôčkový skrutkový mechanizmus na protibežných ložiskách. Jednorazový posuv 500 mm – opakovateľný, pre rezanie akejkoľvek dĺžky. Jednoduché programovanie – zadajte dĺžku rezu a počet kusov a stlačte „ŠTART“. Elektronická kontrola napnutia pásu. Hfsdpfxschhfue Agusn Automatické sledovanie zaťaženia rezu prostredníctvom servo-ventilu priamo namontovaného na valci. Kontrola rotácie pásu s okamžitým zastavením v prípade zablokovania pásu.

Stav: nový, Motor power: 1.1/2.2 kW Vice opening: 130 mm Band dimensions: 350x32x2.5 Weight: 220 kg Speed: 30/60 rpm Cutting capacity at 0°: 115 / 100 / 130x80 Cutting capacity at 45° right: 100 / 85 / 90x80 Cutting capacity at 45° left: 75 / 75 / 90x65 Cutting capacity at 60° right: Cutting capacity at 60° left: Description Manual mitre saw for angle cuts from 45° right to 45° left, offering high sawing performance. Robust cast iron construction, practical and safe for every cut. The FALCON 352 is available as a bench-mounted version or with a stand (accessory). The machine is equipped with a two-speed three-phase motor. Upon request, the machine can be supplied with a pneumatic vice (FALCON 352 MA, the vice closes automatically when the head is lowered). This version is always supplied with a stand. Standard equipment: - Externally adjustable clutch - Locking device with vice - Prismatically guided, adjustable slide - Fixed vice clamps with axial adjustment for clamping the workpiece close to the cutting line - Adjustable chip remover attachment, made entirely of steel - 48 V electric coolant pump for blade cooling and lubrication - Dual return spring for securing the loading platform - Hoistable machine - Worm gear shaft mounted on a pair of bearings - Off-centre mounted blade holder shaft - 2 speeds: 30 and 60 rpm - Vice opening: 130 mm - Machine supplied without saw blade Electrical equipment: - Electrical control panel - Marked cable connections - Main safety switch (lockable with padlock) - Emergency stop device - Phase failure protection - Speed selector switch - Thermal-magnetic protection - Undervoltage trip Hjdpscgrkyjfx Aguofn - Motor protection class IP54 - Low voltage circuitry: 24 Volt - Electric coolant pump: 48 V - Motor: 1.1/2.2 kW, 400 Volt For further technical data, please refer to the attached PDF document.

Stav: nový, MEP TIGER 372 CNC LR 4.0 Article number: TI372CNCLR Motor power: 4.0 kW Vise opening: 190 mm Blade dimensions: 370x32x3 mm Weight: 1,060 kg Speed: 15–150 rpm Cutting capacity at 0°: 120 / 110 / 180x100 mm Cutting capacity at 45° right: 115 / 100 / 120x100 mm Description: Electromechanical vertical circular saw with semi-automatic function for the use of HSS saw blades, designed for precision cuts from 45° right to 60° left. Equipped with multi-microprocessors and two controlled axes, allowing programming of up to 80 different cutting programs per material thickness, each with variable cutting length and quantity. Standard features: - Saw head glides on double linear ball-bearing guides - Saw head feed with electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (length 1,000 mm) via ball screw and stepper motor with movable feeder vise - Vise opening 190 mm - Programmable saw head stroke via control panel, adjustable for varying materials - Pneumatic vertical vise - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile material - Chip removal brush - Machine suitable for pallet truck transport, including tools and user manual Electrical equipment: - Control panel - Up to 80 programmable cutting programs - Operation-ready status indicator - Main safety switch - Programming and control console with LCD display and self-diagnostics - LED function check at control panel - Emergency stop button - Speed selector switch - Thermal magnetic protection - Undervoltage release - IP 55 safety-rated control handle - 24V low voltage system - Electric coolant system for saw blade lubrication and cooling (option for micro-spray unit) - Motor: 4.0 kW, 400 V MEP TIGER 372 CNC LR 4.0 RC with Automatic Mitre Article number: TI372CNC LR 4.0 RC Motor power: 4.0 kW Vise opening: 190 mm Blade dimensions: 370x32x3 mm Weight: 1,060 kg Speed: 15–150 rpm Cutting capacity at 0°: 120 / 110 / 180x100 mm Cutting capacity at 45° right: 115 / 100 / 120x100 mm Description: Automatic electromechanical vertical circular saw, designed for serial cutting operations with automatic mitre angle adjustment between -45° and +45° on steel. In semi-automatic cycle, mitre cuts can be performed between -45° and +60°. Equipped with multi-microprocessors and two controlled axes, allowing programming of up to 80 different cutting programs per material thickness, each with variable cutting length and quantity. Standard features: - Saw head glides on double linear ball-bearing guides - Saw head feed with electromechanical cylinder - Rotational axis with thrust bearing - Three-stage gearbox - Material feed (length 1,000 mm) via ball screw and stepper motor - Movable feeder vise - Vise opening 190 mm - Programmable saw head stroke via control panel, adjustable for varying materials - Pneumatic vertical vise Hodpfxochkyrj Aguefn - HSS DMO 5 saw blade Ø 370x32x3 mm for solid and profile material - Chip removal brush Electrical equipment: - Control panel - Up to 80 programmable cutting programs [Please provide the remainder of the 'Electrical Equipment' section if a complete translation is required.]

Stav: nový, MEP TIGER 352 NC 5.0 [Fully Automatic] Article number: TI352NC Motor power: 3.0 kW Vice opening: 190 mm Blade dimensions: 350x32x2.5 Weight: 680 kg Cutting speed: 15 - 90 m/min Cutting capacity at 0°: 115 / 95 / 180x95 Cutting capacity at 45° right: 110 / 95 / 125x95 Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Description: Electropneumatic, vertical, linear-guided automatic saw designed for the use of HSS saw blades, capable of performing series cuts from 60° left to 45° right on steel. The machine also operates in semi-automatic mode. CNC automatic unit with multiprocessor and two axes controlled by the latest generation MEP control, allowing up to 1,000 different cutting programs for the same material thickness, each with different cut lengths and quantities. FEATURES: - New centralized control panel mounted on a swivel arm, allowing the operator to easily reach the emergency stop button from any position. - NEW: Fieldbus communication system (Modbus protocol) with dual microprocessor and serial connection. - Display with 20 characters x 4 lines, showing the following technical parameters: + Blade speed + Number of programmed/executed cuts + Blade thickness + Feed length + Cutting time + Ammeter + Display of over 100 diagnostic and warning messages - NEW: Display and logging of alarm and error messages with the ability to review past incidents. - NEW: 600 mm material feed with stepper motor and ball screw assembly mounted on opposing ball bearings. - NEW: Electronic inverter for continuous adjustment of the blade speed from 15 to 90 rpm (optional: 30 to 150 rpm). - NEW: Low-voltage control panel with polyester membrane keyboard featuring thermoformed, raised keys, and operation control signal. - Double gear set for high sawing performance. Hfedjchhhdepfx Aguen - Saw head slides on ball-bearing linear double guides. - Coaxial cylinder with bypass valve for rapid approach and potentiometric linear transducer for positioning the saw head. - Saw bow stroke programmable directly from the control panel for adaptation to the cutting material. - Adaptive control of cutting force. - Rotating table with central pin and axial bearing for precise mitre cuts. - Pneumatic vertical vise. - Electric coolant pump for blade cooling and lubrication. - Chip removal brush. - Indicator light for program completion or emergency stop. - HSS saw blade Ø 350 x 32 x 2.5 for solid and profile materials. - Prepared for the installation of a minimum quantity lubrication system (OPTIONAL), in addition to the standard emulsion oil lubrication. For further technical data, please refer to the attached PDF document.

Stav: nový, MEP SHARK 332-1 CCS Metal Band Saw with Semi-Automatic Descent. MEP Authorized Dealer – Please send us your inquiry! Motor Power: 1.5/1.8 kW Vise Opening: 335 mm Blade Dimensions: 3650 x 27 x 0.9 mm Hfodscgbt Rjpfx Aguen Weight: 640 kg Cutting Speed: 40/80 m/min Cutting Capacity 0°: 300 / 260x260 / 330x260 mm Cutting Capacity 45° right: 260 / 250x250 / 270x200 mm Cutting Capacity 45° left: 200 / 180x180 / 200x160 mm Cutting Capacity 60° right: 180 / 170x170 / 170x170 mm Cutting Capacity 60° left: — Description of the MEP Sawing Machine: Operating principle in CCS version: After advancing the material and closing the vises, the cutting process is started. The saw frame descends under its own weight, counterbalanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually lifted back to the necessary position for material feed. Electrical control panel (marked cable connections, operating light indicator, main safety switch with provision for padlock, selector or speed changeover switch, emergency stop, thermal-magnetic protection, 24V low-voltage system). Electronic blade tension converter with display. Manual quick-release vise. Base frame with coolant tray and chip drawer (which can be replaced by a motorized chip conveyor – optional accessory). Electric coolant pump for band cooling and lubrication. Chip cleaning brush. Adjustable precision stops for repeat cuts of identical length. Machine designed for pallet truck handling. Bi-metal saw blade for solid and profile materials. Tool kit and operating instructions. Motor: 1.5/1.8 kW 2 Cutting speeds: 40/80 m/min Vise opening: 335 mm Saw blade: 3650 x 27 x 0.9 mm Weight: 640 kg For cutting data, please see image. Further technical specifications can be found in the attached PDF document.

Stav: nový, MEP SHARK 382-1 SXI EVO pásová pila na kov, hydraulický poloautomat. MEP autorizovaný prodejce – prosím, zašlete nám Vaši poptávku. Výkon motoru: 1,5 / 1,8 kW Rozpětí svěráku: 385 mm Hfedpfx Aog Hzxijgusn Rozměry pilového pásu: 3770 x 27 x 0,9 mm Hmotnost: 695 kg Rychlost pásu: 40/80 m/min Řezná kapacita při 0°: 300 / 250x250 / 380x250 mm Řezná kapacita při 45° vpravo: 260 / 250x250 / 300x200 mm Řezná kapacita při 45° vlevo: 240 / 210x210 / 280x160 mm Řezná kapacita při 60° vpravo: 180 / 170x170 / 200x170 mm Řezná kapacita při 60° vlevo: – Popis: Elektrohydraulická, poloautomatická pásová pila s manuální a poloautomaticko-dynamickou funkcí, určená pro řezání od 45° vpravo do 60° vlevo. Vybrané vlastnosti: - Otočný ovládací panel na vertikálním sloupku - 420 mm velký otočný stůl s válečkovým ložiskem, předpjatým axiálním ložiskem a vyměnitelnými ocelovými vložkami - Dvojí rychlost pásu (40/80 m/min)