Mobilné Umývanie Auta kúpiť použité (1 651)

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: NEW-12, maximálna hmotnosť nákladu: 2 251 kg, celková hmotnosť: 2 700 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 060 mm, šírka ložného priestoru: 1 700 mm, výška ložného priestoru: 300 mm, maximálna rýchlosť: 100 km/h, brzda prívesu: príves s brzdou, Rok výroby: 2026, SARIS PL 306 170 2700 2 NEW VEHICLE Internal dimensions: 306cm x 170cm Sidewall height: 30cm Loading height: 65cm Total weight: 2700kg Payload: 2265kg Braked tandem trailer Overrun and handbrake by KNOTT 2x 1350kg axle with brakes Low-profile chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension latches All sides fold-down and removable 15mm thick, slip-resistant, heavy-duty phenolic plywood floor Automatic jockey wheel with 400kg support load Ledpfx Ahoghpcho Dsrl 8 noise-dampening tie-down rings, 800kg tensile force each Reinforced 13" C-rated tires with steel valves M+S tires Net/rope hooks on frame 13-pin plug LED front marker lights Rear lamps with reversing light, fog light, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026: - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Sidewall extension to 35cm - Black Edition (powder-coated side panels and rims in black) - Integrated loading ramps 2800kg - Steel plate on floor panel - Full LED lighting - Anti-theft device - Fine- or coarse-mesh net - H-frame - Mesh sides in various heights, also closed - Side panel extensions 30cm with tension latch - Flat tarpaulin with or without bows - High tarpaulin 160cm – 200cm - Drop-down crank rear supports Further accessories available on request! Plus delivery to Gera and vehicle registration documents €200 net. Pictures are for illustration only and may show optional accessories at extra cost. Haven’t found the right trailer yet? We have 50–100 vehicles permanently in stock and available for immediate pick-up. The workshop is open weekdays from 8:00 – 17:00 for all types of repairs. Specialist for axle repairs, including caravan/travel trailers. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or come by directly.

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: NEW-22, maximálna hmotnosť nákladu: 2 894 kg, celková hmotnosť: 3 500 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 060 mm, šírka ložného priestoru: 1 840 mm, výška ložného priestoru: 300 mm, maximálna rýchlosť: 100 km/h, brzda prívesu: príves s brzdou, Rok výroby: 2026, SARIS PL 406 184 3500 2 NEW VEHICLE Internal dimensions: 406 cm x 184 cm Sidewall height: 35 cm Loading platform height: 68 cm Gross weight: 3500 kg Payload: 2894 kg Braked tandem trailer Overrun brake and handbrake by AL-KO Maximum axle and brake dimensions Low chassis Fully welded, hot-dip galvanized steel frame 35 cm aluminium profile side panels with tension locks Side panels can be folded down and removed on all sides 15 mm thick, anti-slip and robust phenolic plywood floor Ljdpfx Ahoghpbko Derl Automatic jockey wheel with 400 kg support load 8 noise-reducing lashing rings with 800 kg traction force Reinforced 13” C-rated tires with steel valves M+S (mud and snow) tires Net/rope hooks on the frame 13-pin plug LED front marker lights Rear lights with reversing light, fog light, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 - 100 km/h equipment (shock absorbers) - Spare wheel with holder - Without side panels (price reduction) - Black Edition (powder-coated side panels and rims in black) - Integrated loading ramps, 2,800 kg capacity - Steel plate on floor panel - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Mesh extension in various heights, also closed - 30 cm extension side panels with tension lock - Flat tarpaulin with or without bows - High tarpaulin 180 cm or 200 cm - AL-KO winch, 12.5 m Further accessories available on request! Plus freight to Gera and vehicle registration certificate: €200 net Images for illustration purposes only. May show accessories subject to surcharge. Haven’t found a suitable trailer yet? We have 50–100 vehicles in stock, immediately available for pickup. The workshop is open weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravans. Wide range of rental trailers available. We also offer a large selection of spare parts and accessories for trailers of all brands. Get advice by phone, visit our website, or stop by directly.

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: NEW-23, pohotovostná hmotnosť: 541 kg, maximálna hmotnosť nákladu: 2 159 kg, celková hmotnosť: 2 700 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 4 060 mm, šírka ložného priestoru: 1 840 mm, výška ložného priestoru: 350 mm, zavesenie: iný, veľkosť pneumatiky: 195 / 50 R 13, maximálna rýchlosť: 100 km/h, farba: strieborný, brzda prívesu: príves s brzdou, Rok výroby: 2026, brzdy: iný, SARIS PL 406 184 2700 2 NEW TRAILER Internal dimensions: 406cm x 184cm Side wall height: 35cm Loading area height: 68cm Gross weight: 2700kg Payload: 2149kg Braked tandem trailer Overrun brake and parking brake by KNOTT 2 x 1350kg axles with brakes Low-height chassis Fully welded, hot-dip galvanized steel frame 35cm aluminum profile drop sides with latch locks All sides foldable and removable 15mm thick, non-slip and robust phenolic plywood floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing rings with 800kg lashing capacity each Lrodpfxeghpbge Ah Djl Reinforced 13'' C-specification tires with steel valve M+S tires Mesh/rope hooks on the frame 13-pin plug LED marker lights at front Rear lamps with reverse light, fog light, and triangular reflectors OPTIONAL ACCESSORIES PERMANENTLY DISCOUNTED FROM FEBRUARY 2026 - 100km/h equipment (shock absorbers) - Spare wheel with holder - Without drop sides (discounted price) - Black Edition (powder-coated drop sides and rims in black) - Integrated loading ramps 2800kg - Steel plate on floor panel - Full LED lighting - Anti-theft device - Fine or coarse mesh net - H-frame - Leaf mesh sides in various heights, also closed - Extension sides 30cm with latch locks - Flat tarpaulin with or without support bows - High tarpaulin 180cm or 200cm - Fold-down crank rear supports Other accessories available on request! Plus delivery to Gera and vehicle registration documents €200 net Images are for reference and may show accessories subject to additional charge. Have you not found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate collection. The workshop is open on weekdays from 8:00 to 17:00 for all types of repairs. Axle repair specialist, including for caravans. Large range of rental trailers available. In addition, we offer a large selection of spare parts and accessories for trailers from all manufacturers. Get advice by phone, visit our website or come by in person.

Stav: použitý, Rok výroby: 1979, Formát: 920×1300 mm Výbava: Maximálny formát archu: 920×1300 mm, minimálny: 560×1300 mm Šírka otvorenia v ráme: 920×1310 mm, maximálny rozmer výseku: 910×1300 mm Maximálna výseková plocha: 900×1300 mm, maximálna uchopovacia hrana: 16 mm, minimálna: 8 mm Maximálna hrúbka kartónu: 3 mm (vrátane mikrovlnenky a vlny nula), maximálny tlak stlačeného vzduchu: 500 t, maximálny počet cyklov: 5500/h Výška podávacieho stohu: 1100 mm, výška výstupného stohu: 1100 mm, výkon hlavného motora: 18 kW, spotreba hlavného motora: 17 kW, rýchlosť: 5500 cyklov/h. Lodpfxsy Iu Rts Ah Derl Rozmery stroja (D × Š × V): 6835 mm × 3580 mm × 2690 mm. Celková hmotnosť stroja s vložkou cca 30 t, bez vložky cca 29 t

Stav: nový, Funkcionalita: plne funkčný, číslo stroja/vozidla: NEW-18, maximálna hmotnosť nákladu: 2 981 kg, celková hmotnosť: 3 500 kg, konfigurácia náprav: 2 nápravy, dĺžka ložného priestoru: 3 060 mm, šírka ložného priestoru: 1 840 mm, výška ložného priestoru: 300 mm, maximálna rýchlosť: 100 km/h, brzda prívesu: príves s brzdou, Rok výroby: 2026, SARIS PL 306 184 3500 2 Internal dimensions: 306 cm x 184 cm Side wall height: 30 cm Ljdpfx Ahsghpbyj Dsrl Loading platform height: 65 cm Gross weight: 3500 kg Payload: 2968 kg Braked tandem trailer Overrun and handbrake by AL-KO Largest available brake configuration Low chassis Fully welded, hot-dip galvanized steel frame Aluminium profile side walls with tension locks Drop and removable side panels all around 15 mm thick, slip-resistant, robust phenolic plywood floor Automatic jockey wheel with 400 kg support load 8 noise-reducing lashing rings, each with 800 kg tensile force Reinforced 13" C-profile tires with steel valve M+S (Mud and Snow) tires Net/rope hooks on frame 13-pin plug LED position lights at the front Rear lamps with reversing light, fog lamp, and triangular reflectors Optional accessories: - 100 km/h package (shock absorbers) - Spare wheel with holder - Without side walls (discount available) - Side wall height increase to 35 cm - Black Edition (powder-coated side panels and rims in black) - Integrated loading ramps 2800 kg - Steel plate on floor panel - Complete LED lighting - Anti-theft lock - Net (fine or coarse mesh) - H-frame - Leaf mesh sides also available closed - 30 cm extension sides with tension locks - Flat tarpaulin with or without bows - High tarpaulin (160 cm - 200 cm) Further accessories available on request! Plus shipping to Gera and vehicle registration documents: €200 net Images are for illustration; may show accessories subject to surcharge. Haven't found the right trailer yet? We always have 50-100 vehicles in stock, ready for immediate delivery. The workshop is open weekdays from 8:00 to 17:00 for all types of repairs. Axle repair specialist – also for caravans. Large selection of rental trailers. We also offer a wide range of spare parts and accessories for trailers of all manufacturers. Get expert advice by phone, visit our website, or stop by in person.

Stav: nový, Šikmý výtah SA200 so sklopiteľným Raetzmühle RM2,2 - Použitie s alebo bez Raetzmühle bez potreby prestavby Lredpeb I Ucasfx Ah Dsl Menovitý výkon až do 1000 kg/h Výkon motora výťahu 0,37 (0,5) kW (PS); mlyn 2,2 (3,0) kW (PS) Elektrické pripojenie 400 V 50 Hz (3 fázy) Elektrická poistka 16 A Dĺžka 2620 mm Šírka 700 mm Výška 2100 mm Výška príjmu 800 mm Hmotnosť 185 kg Materiál 1.4301 / AISI 304 Pripojenie na čistenie ½" vnútorný závit Pripojenie na umývaciu nádrž 1½" vonkajší závit Výška výstupu rmutu 1240 mm Obsah dodávky: rezacie sito 9 a 16 mm

Stav: nový, Mobilná lisovacia jednotka s pásovým alebo balíkovým lisom Lsdpfx Ahjb Nvffj Dsrl - Konfigurácia podľa požadovaného výkonu (hodinová kapacita) je možná Podrobnejšie informácie na vyžiadanie!

Stav: nový, Rezné rozpätie pri 90 stupňoch: okrúhle 172 mm Rezné rozpätie pri 90 stupňoch: štvorcové 170 mm Rezné rozpätie pri 90 stupňoch: obdĺžnik 170 x 170 mm Rozmery pílového pásu 2035 x 20 x 0,9 mm Rozmery D x Š x V 430 x 960 x 520 mm Lrodsfgyhzepfx Ah Djl Rýchlosť pásu 30 - 80 m/min Celkový príkon 1,5 kW Hmotnosť stroja cca 38 kg AKCIOVÁ CENA!! Berg & Schmid - Montážna pásová píla PBS 171 ESC Výkonná a mimoriadne robustná pásová píla na kov s pílovým stolom z tlakovo liateho hliníka a plynulo nastaviteľnou rýchlosťou rezu na rezy pod uhlom až do 60° Voliteľne: Strojový podstavec typ 20508

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, najazdené kilometre: 34 000 km, typ paliva: nafta, palivo: nafta, farba: biely, typ prevodu: mechanický, emisná trieda: Euro 6, dĺžka ložného priestoru: 3 150 mm, šírka ložného priestoru: 2 100 mm, výška ložného priestoru: 400 mm, Rok výroby: 2023, Výbava: ABS, Android Auto, Bluetooth, USB port, airbag, centrálne zamykanie, elektronický stabilizačný program (ESP), klimatizácia, sadzový filter, systém kontroly trakcie, tempomat, Fiat Ducato MAXI s práve nainštalovaným žeriavom PLM Emisná trieda Euro 6-DTEMP Biela farba Registrácia 2023 KM 34000 Objem motora 2200 140 k Manuálna prevodovka Voliteľná výbava: ABS, autorádio, bluetooth, lakťová opierka predných sedadiel, centrálny zámok, manuálna klimatizácia, ukazovateľ vonkajšej teploty, recirkulácia vzduchu, posilňovač riadenia Dĺžka úložného priestoru 3150 mm Šírka 2100 mm Cena 39 800,00 eur + DPH + prepis vozidla Ljdpeyu S Uhefx Ah Djrl Záruka PLM žeriav s 3 výsuvnými sekciami 7,20 m Nový žeriav práve nainštalovaný Vozidlo bez úveru alebo lízingu. Doručenie zdarma po celom Taliansku do 500 km od nášho sídla. Bezplatný transfer z letísk Linate, Malpensa a železničných staníc na prehliadku a testovanie vozidiel. 3516190575 (aj WhatsApp)

Stav: použitý, najazdené kilometre: 28 km, výkon: 110 kW (149,56 k), prvá registrácia: 12/2025, typ paliva: nafta, pohotovostná hmotnosť: 3 415 kg, maximálna hmotnosť nákladu: 2 600 kg, celková hmotnosť: 6 000 kg, konfigurácia náprav: 4x2, rázvor náprav: 2 800 mm, palivo: nafta, farba: sivý, kabína vodiča: denná kabína, typ prevodu: mechanický, emisná trieda: Euro 6, zavesenie: iný, počet sedadiel: 3, dĺžka ložného priestoru: 3 076 mm, šírka ložného priestoru: 1 900 mm, výška ložného priestoru: 400 mm, Výbava: ABS, airbag, centrálne zamykanie, prípojné zariadenie, sadzový filter, systém kontroly trakcie, uzávierka diferenciálu, žeriav, FUSO Canter 6S15 Flatbed with Crane and Radio Remote Control, Available Immediately! Vehicle with Day Registration 12/25 Chassis: Fuso 6S15 Canter, Gross Vehicle Weight 6000kg, Payload 2625kg - Manual transmission - Limited slip differential lock - Batteries: 2 x 100 AH - Towbar with ball head, 3000kg towing capacity with electrical kit (factory-fitted), upgradable to 3500kg - Heated exterior mirrors - Radio pre-installation, radio - Reverse warning system - PTO with increased rpm - Battery and AdBlue tank covers - Battery cut-off relay preparation - Continental traction tyres 205/75/R16C - Seat covers - Optional reversing camera upon request - Aluminium platform internal dimensions: L 2900 mm x W 1870 mm x H 400 mm (custom sizing available!) - 18mm floor plate - Floor frame with Airline lashing rail all around - Airline rail also in the front wall - Anodized aluminium side walls with folding step, easily removable - 2 x storage boxes - Work light - Zinc primer, Dinitrol cavity protection, stainless steel screws and tube clamps Crane: With 4x hydraulic extensions and radio remote control (Country of manufacture: Italy) - Incl. manual extension up to 10.6m reach - Radio remote control (premium, proportional control, 2 simultaneous functions possible, etc.) - Lifting capacity according to manufacturer: at 3.55m = 995kg, 5.0m = 670kg, 6.40m = 495kg, 7.85m = 365kg, 9.30m = 290kg + manual extension 10.60m = 200kg - Zinc primer, Dinitrol cavity protection, stainless steel screws and tube clamps - Hydraulic tank - Pressure relief valve - Emergency stop - Load hook - User manual and spare parts list Errors and interim sales excepted. Ljdpfxsyf Uq Hj Ah Djrl ... VAT deductible, ASR, ABS, radio, heated mirrors, central locking with remote, driver airbag, towing hitch, power steering, diff lock, spare wheel, short cab, electric windows, crane, demonstration unit, emission class: Euro 6, diesel, rear-wheel drive, very good condition, hydraulics, particulate filter, main inspection & emission test renewed before sale, available for rental, emissions sticker: 4 (green)

Stav: nový, Rok výroby: 2026, Portable 200L pressure blasting pot for construction site or stationary use. Ledpfoynr E Tex Ah Dorl Valves securely mounted under the handle. Very well suited for tough construction site use. Consisting of: - 200L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable conveying air (air flow for the pot and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx. 3.57 m³/min) - Blast media mixing valve, Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety devices: - Dead man's switch with control cable - Controlled quick venting Optional: - Larger handle with hose holder - Wet blasting head - Breathing air heater - Transport frame with Hobbock and lid as an attachment for extended blasting without refilling - etc. Made in Germany

Stav: použitý, Použitý stroj Lredpfx Ahsxnffle Djl Vybavenie a technické údaje: Mobilné odsávanie s filtračným vakom hore Odsávací nástavec: 140 mm Motor: 1,1 kW, 400 V Dostupnosť: v krátkej dobe Umiestnenie: Flörsheim

Stav: pripravené na použitie (použité), Euromate MFS UltraFlex mobilná odsávacia jednotka Mobilný filter Odsávanie zváracieho dymu Prietok vzduchu: cca. 800 – 1 500 m³/h Dĺžka ramena: 4 m Lrsdpfxeymlc Ne Ah Del Priemer potrubia: Ø203 mm Radi vás privítame na osobnej obhliadke. Na požiadanie vám vieme zabezpečiť cenovo výhodnú prepravu! Obdržíte riadny doklad o kúpe. Pre zahraničných zákazníkov je možné vystaviť aj faktúru bez DPH. Podmienkou je platné IČ DPH. Predaj vyhradený, medzičasom môže byť položka predaná. Navštívte náš obchod a prezrite si aj naše ďalšie ponuky. Uvedené obchodné mená a ochranné známky sú majetkom ich vlastníkov a slúžia len na identifikáciu a popis produktov. Odchýlky v technických údajoch a prípadné chyby v popise tovaru sú vyhradené.

Stav: použitý, najazdené kilometre: 100 000 km, prvá registrácia: 08/2010, celková hmotnosť: 2 000 kg, Výbava: žeriav, rôzne žeriavové drapáky alebo paletové vidlice. Pozri fotky. Lredpew R I Rdjfx Ah Djl

Stav: veľmi dobrý (použitý), Rok výroby: 1988, MEM Cobra 2MT Viacrezačka 2 pohyblivé spojky hydraulicky plávajúce píly 2 motory s výkonom 30 kW výška rezu 100 mm šírka rezu 900 mm Lodpfxsmv H Dqo Ah Dsrl 2 hydraulické čerpadlá 15 kW a 7,5 kW elektronické ovládanie 4 líniové lasery vysoká produktivita hmotnosť cca 8 000 kg

Stav: použitý, Rok výroby: 2004, Funkcionalita: plne funkčný, DÜRR Water-based Cleaning System with Large Basket – single and double basket options available. The system is offered ex-works; a comprehensive set of spare parts is included in the package. Price on request Our Plant and Machinery Service: High availability – maximum productivity! Downtime costs time and money – that’s why we ensure your machines and systems run reliably and at peak performance. Our experienced team of qualified service technicians supports you with expertise, commitment, and complete service from a single source. Our Service Promise: We keep your systems in top condition – from mechanics and electronics to refrigeration technology. Whether maintenance, repairs, or optimisation: we ensure everything runs smoothly. Our Services at a Glance 🔧 Electrical/Electronic Service • Professional troubleshooting and repairs • Modifications, upgrades, and modernisation of control systems (all common manufacturers) • Optimisation of existing systems • Spare parts service for rapid recommissioning ⚙️ Mechanical Service • Rapid crash repairs and professional restoration • Regular maintenance and servicing of your equipment • Modifications, adaptations, and expansions • Installation and commissioning of new machines • Refrigeration system inspections according to §6 Section 1 Chemicals Climate Protection Ordinance Lsdpfsx Emy Uex Ah Dorl We carry out almost all mechanical and electronic works precisely, reliably, and on schedule. ----- Why we are the right partner for you ✅ All services from a single provider – mechanical, electrical, and refrigeration ✅ Experienced technicians with comprehensive know-how ✅ Fast response times and flexible solutions ✅ High system availability through preventive maintenance

Stav: nový, Rok výroby: 2024, Funkcionalita: plne funkčný, rezná sila: 630 t, výkon: 110 kW (149,56 k), celková šírka: 2 400 mm, celková dĺžka: 9 400 mm, celková výška: 3 800 mm, celková hmotnosť: 50 000 kg, dĺžka rezu (max.): 1 600 mm, typ vstupného prúdu: trojfázový, Scrap Shear MS-6300mex (mobile scrap shear with electric motor) A 250kW diesel generator can be offered separately. Model: MS-6300mex Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 kW Capacity: 8-15 t/h Machine weight: 50 t (+diesel generator 4 t) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for efficient scrap cutting: - Simple automatic operation - Energy-saving - Cost-effective - No foundation required The scrap shear is capable of cutting almost all types of scrap material. Note: The machine is not recommended for cutting high-carbon steel, such as: axles, wire ropes, pig iron, spring steel plate, rails, alloy steel, hubs, etc. (These hard materials damage the cutting blades) Function: Scrap is loaded into the feed area with the help of an excavator. Thanks to the horizontal feed section and the scrap's own weight, the material falls down into the loading chamber and into the cutting area. The scrap is compressed against the front wall and cut by horizontally moving tool holders across the blades on the end wall. While the tool holder carriage moves horizontally, the processed material is pushed out over the blades at the front wall of the container. During the return stroke to the rear position, the scrap, due to its own weight, moves further into the interior of the shear. Scrap shears are available in various designs according to customer requirements, and the output size can be selected (for new orders). Inspection and test operation are possible. Lrjdpfxjr Ihzis Ah Dol

Stav: pripravené na použitie (použité), Rok výroby: 1988, A complete beer keg cleaning and filling line from Leifeld + Lemke (today IW-Anlagentechnik) is available. Throughput capacity: approx. 120 kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. Ledpfx Aeycigkoh Dorl 1) Keg/Barrel External Cleaning Machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240 kegs/h, operating cleaning capacity: 140 kegs/h, drive rollers: 2, infeed/outfeed transfer rollers: 1/1. 2) Keg/Barrel Pre-cleaning Machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180 kegs/h, operating washing capacity: 120 kegs/h, design: stainless steel, process: centring, residual emptying with air purge, mixed water pre-cleaning, waiting and soaking station, caustic cleaning, and pre-filling. 3) Keg/Barrel Main Cleaning and Filling Machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60 kegs/h, design: stainless steel, process: centring, internal cleaning station, 2x sterilisation positions, filling process preparation, filling station, waiting station. 4) CIP Cleaning Station for Kegs, max. cleaning capacity: 180 kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. In addition, the system includes the complete pallet conveyor, keg transport system, and a Kuka robot for automated palletising and depalletising of kegs. Documentation available. On-site inspection possible.

Stav: dobrý (použitý), Stroj se koristio za pranje voća i maslina i u dobrom je stanju. Lrsdpfjvtf T Dox Ah Dol

Stav: použitý, výkon: 1,1 kW (1,50 k), vstupné napätie: 380 V, objemový prietok: 2 000 m³/h, priemer sacieho potrubia: 140 mm, filtračná plocha: 1,65 m², celková výška: 1 900 mm, celková dĺžka: 1 100 mm, celková šírka: 650 mm, celková hmotnosť: 50 kg, priemer odsávacieho pripojenia: 140 mm, nominálny prietok: 2 000 m³/h, podtlak: 1 800 Pa, menovitý výkon: 1,1 kW (1,50 k), potrebná výška: 1 900 mm, požiadavok na dĺžku priestoru: 1 100 mm, požadovaná šírka: 650 mm, transportná dĺžka: 1 100 mm, prepravná šírka: 650 mm, prepravná výška: 1 900 mm, No. 3258 Mobile Extraction Unit / Mobile Dust Extractor Scheppach HA 3200 Used For the extraction of wood shavings, milling chips, sawdust, and sanding dust Motor 1.1 kW, 380 V Airflow capacity 2000 m³/h Maximum pressure difference 1800 Pa Extraction port diameter 140 mm Impeller diameter 320 mm Lredox Hi Rxspfx Ah Djl Special filter diameter 500 mm, height 800 mm Filter area 1.65 m² Mobile extraction unit with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm (LxWxH) Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or assembly Dismantling, loading, and transport by us available as an option Subject to errors in description and pricing To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale takes place in as-is condition Technical specifications, condition descriptions, year of construction, and scope of delivery according to manufacturer’s brochure and previous owner information, without guarantee Subject to prior sale For used machines, any warranty is excluded; applies: 'sold as inspected' Photos and videos are examples and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stav: použitý, výkon: 1,1 kW (1,50 k), objemový prietok: 2 000 m³/h, priemer sacieho potrubia: 140 mm, filtračná plocha: 1,65 m², celková výška: 1 900 mm, celková dĺžka: 1 100 mm, celková šírka: 650 mm, celková hmotnosť: 50 kg, priemer odsávacieho pripojenia: 140 mm, nominálny prietok: 2 000 m³/h, podtlak: 1 800 Pa, menovitý výkon: 1,1 kW (1,50 k), potrebná výška: 1 900 mm, požiadavok na dĺžku priestoru: 1 100 mm, požadovaná šírka: 650 mm, transportná dĺžka: 1 100 mm, prepravná šírka: 650 mm, prepravná výška: 1 900 mm, No. 3257 Mobile Extraction Unit / Mobile Dust Extractor Scheppach HA 3200 Used For extraction of planer shavings, milling chips, sawdust, and sanding dust Motor: 1.1 kW, 380 V Airflow: 2,000 m³/h Maximum pressure difference: 1,800 Pa Extraction inlet diameter: 140 mm Impeller diameter: 320 mm Special filter: diameter 500 mm, height 800 mm Filter surface area: 1.65 m² Mobile extraction system equipped with 2 swivel castors Lodpex Hi H Hofx Ah Dsrl Transport dimensions approx. 1100 x 650 x 1900 mm (L x W x H) Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport, or installation Dismantling, loading and transport by us available as an option Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place as is Technical specifications, condition description, year of manufacture, and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, applies as: “purchased as inspected” Images and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex location

Stav: použitý, No. 04491 Mobile Extraction Unit / Mobile Dust Extractor ESTA Dustomat HMS 10 WN Ljdsxnqauepfx Ah Derl Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust class 2, 0.2 mg/m³ Design type 1, suitable for extraction of combustible dusts in dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air flow rate: 720 m³/h Filter area: 3.5 m² Extraction duct connection diameter: 100 mm Filter cleaning via manual crank Chip container: 670 x 460 mm Mobile unit CE compliant Transport dimensions approx. 1300 x 550 x 1700 mm (L x W x H) Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. The sale is conducted in as-is condition. Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee. Subject to prior sale. No warranty is provided for used machines; the following applies: "bought as seen". Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch. Delivery terms: ex stock

Stav: použitý, No. 04490 Mobile Extraction Unit / Mobile Dust Extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m³ Design type 1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air flow rate 720 m³/h Lrsdpfx Asxn Tiljh Dsl Filter area 3.5 m² Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Unit is mobile CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm (LxWxH) Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended. Sale as-is Technical specifications, condition description, year of manufacture, and scope of supply as per manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. For used machines, any warranty is excluded; the rule is: "sold as seen" Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex stock

Stav: použitý, Číslo: 04489 Mobilné odsávacie zariadenie / mobilný odlučovač prachu ESTA Dustomat 61 Použité Na odsávanie dreveného prachu a triesok Typ filtra H2 pre drevený prach, stupeň zvyškovej prašnosti 2, 0,2 mg/m3 Konštrukčné vyhotovenie 1, na odsávanie horľavých prachov v zóne 22 400 V, 3 kW, s napájacím káblom a zástrčkou Nominálny objemový prietok vzduchu 1850 m3/h Priemer pripojenia odsávacej rúrky 160 mm Filtračná plocha 9,6 m2 Čistenie filtra ručnou kľukou Rozmery filtra cca 720 x 510 mm Zásobník na triesky 860 x 570 mm Zariadenie je pojazdné CE-zgodné Vrátane nového náhradného filtra K dispozícii je návod na obsluhu Transportné rozmery cca 1700 x 800 x 2100 mm DŠV Hmotnosť cca 250 kg Lrjdpfx Ahjxnprcj Dol Aby sa predišlo možným nedorozumeniam, je možné a odporúčané si zariadenie po dohode osobne prezrieť Predaj v aktuálnom stave Technické údaje, popis stavu, rok výroby a dodací rozsah podľa prospektu výrobcu alebo predchádzajúceho majiteľa, bez záruky Medzipredaj vyhradený Pri použitých strojoch je vylúčená akákoľvek záruka, platí: „kúpené ako prehliadnuté“ Platobné podmienky: Ceny bez DPH, platba pred vyzdvihnutím alebo odoslaním Dodacie podmienky: zo skladu

Stav: generálne opravený (použitý), Rok výroby: 1992, prevádzkové hodiny: 3 998 h, Funkcionalita: plne funkčný, číslo stroja/vozidla: 100175, We are selling a used Franke drum washing system for cleaning bulk materials, primarily designed for turned and milled parts. Equipment details: - Tanks are entirely made of stainless steel - 600-liter washing tank with 18 kW heater - 600-liter rinsing tank with 18 kW heater - Both tanks insulated - Weekly timer for the heaters - Wash drum can be controlled via rotary switch; 360° rotation or stationary during washing and rinsing, including speed sensor - Exhaust fan with 900 m³/h airflow - Oil separator via large disc skimmer with drip tray and ball valve - Automatic water dosing / Geka coupling at the rear - 2 wash baskets 530 x 300 x 200 mm with clamping lids, mesh size 6x6 mm, 50 kg load per basket - Pneumatic door opening and switching from washing to rinsing - Standframe as basket support, mountable with 4x M12 bolts - Drain taps for wash and rinse tanks, as well as two large maintenance hatches - Good accessibility on all sides: 2 folding doors at the front, remaining side panels removable via quick-release fasteners - Rexroth pneumatic components - Grundfos stationary pumps in both wash and rinse tanks - 63 A Mennekes plug with 5 m cable - Rittal control cabinet with internal accessories Lredsqwnypopfx Ah Dol - Operating manual included - Machine is immediately ready for use - Delivery and commissioning possible by arrangement and cost coverage - Invoice issued with 19% VAT If you have any questions, please feel free to write or call.