Powermill kúpiť použité (3)

Stav: pripravené na použitie (použité), Rok výroby: 2022, výkon motora vretena: 29 000 W, maximálna rýchlosť vretena: 5 000 ot./min, celková hmotnosť: 620 kg, počet osí: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning and milling center features both a main and counter spindle, each with a maximum torque of 250 Nm and speeds up to 5,000 rpm. The milling spindle provides up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the advanced Sinumerik ONE control system. If you are seeking high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as specified) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross slide with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool setup: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High pressure cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm in depth for counter spindle • Programmable clamping pressure for main and counter spindle • External through-flow rinsing at main and counter spindle • Mechanical holding brake at main and counter spindle • C-axis for main and counter spindle Ledpfx Ajx D E Hbea Hsri • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multitouch display • IPC with 240 GB • SHOPTURN conversational programming • 3D simulation and drawing • Residual material detection • External memory unlock • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, network drive (Ethernet) • PC keyboard including HMI hotkey • LED status indicator • Fluids and operating materials: • 2 coolant lines at 25 bar • 2 rinse pumps at 4.3 bar • Electrical cabinet climate unit • Cooling system for spindle motors, milling spindle, torque motor of B-axis, and turret direct drive • Hydraulic unit • Machine lamp • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (including pneumatic installation), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinge belt chip conveyor, discharge height 1,200 mm • Band filter unit, 980 liters • Dirty water pump • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless touch probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar loader (as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stav: pripravené na použitie (použité), Rok výroby: 2008, prevádzkové hodiny: 12 125 h, výkon motora vretena: 29 000 W, maximálna rýchlosť vretena: 5 000 ot./min, výrobca ovládačov: SIEMENS, model regulátora: SINUMERIK 840D, počet osí: 6, This 6-axis EMCO Hyperturn 665MC Plus turning and milling center was manufactured in 2008. It features a multi-axis CNC system with Y-axis and B-axis for complete machining of turned and milled parts. Equipped with integrated spindle motors on the main and counter-spindles, it offers a spindle speed of up to 5,000 rpm for the main spindle and 7,000 rpm for the counter-spindle. It has a 24-position tool magazine and a SINUMERIK 840D control system. If you are looking for high-end turning and milling capabilities, you should consider the EMCO Hyperturn 665MC Plus we have for sale. Contact us for more information about this machine. Additional Equipment • Tool turret: 12-position VDI 30 radial turret with directional logic for up to 12 driven tool stations • B-PowerMill: Motorized milling spindle with a 24-position tool magazine, 210° swivel range • Optional tool package: Includes static and driven tool holders, collet holders, reduction sleeves, and actuating clamps • Hollow chuck cylinder with draw tube / part ejector and through-spindle flushing on the counter-spindle / finished part pick-off device Lredpfx Aaex D Hwns Hei • Finished parts receiver / coolant unit in the chip conveyor / high-pressure pump (14 bar) with fine filter • Rinsing pumps (3.7 bar) / control cabinet air conditioner / electrostatic oil mist separator • Hydraulic unit / machine lamp / interface for foot switch / signal light • Documentation includes handwheel, PC keyboard, network preparation, tool monitoring, turning window, cleaning gun • Clamping device for main spindle: Hainbuch BZI 80 pull-back chuck Machine Advantages Technical Machine Advantages • Counter-spindle: 22 kW / Counter-spindle: 0–7,000 rpm • Main spindle: kk 6 (bar passage 65 mm) / Counter-spindle: kk 6 • Y-axis travel: +/- 50 mm • C-axis for main and counter-spindle • Counter-spindle: 3-jaw chuck 210 mm • Approx. 40 Capto C4 toolholders for the milling spindle • Loader lm 1200 • The machine does not have Shopturn programming. It must be programmed with ISO code, with simple cycles for drilling, milling, swiveling, etc. available. • 12-station turret and a milling spindle

Stav: veľmi dobrý (použitý), Rok výroby: 2008, HYPERTURN 665 MCplus - B-PowerMill Multi-axis CNC turning center with automatic tool changer, Y-axis and B-axis for complete machining of turning-milling parts; integrated spindle motors (ISM) on main and counter spindle with thermal compensation system (liquid-cooled). Drive power: Main spindle – 29 kW Counter spindle – 22 kW Speed range: Main spindle: 0–5000 rpm Counter spindle: 0–7000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (bore 65 mm) Counter spindle: KK 6 Y-axis travel range: +/- 50 mm The Y-axis is designed so that the cutting forces are distributed across two axes, ensuring extremely high rigidity for all machining operations. B-PowerMill: For machining inclined surfaces and drilling operations, a motor-driven milling spindle with 24-position tool magazine is integrated in the upper slide system. The swiveling range of 210° is infinitely adjustable and can be interpolated. Preloaded roller guideways on all linear axes; digital drive system; integrated spindle encoder; state-of-the-art control technology SINUMERIK 840D, includes: * Hollow clamping cylinder with draw tube * Parts ejector and through-spindle flushing on the counter spindle * 12-station tool turret VDI 30 radial with directional logic for up to 12 driven tool stations Swivel speed adjustable via feed override switch. Performance data: Max. 6.7 kW at 2650 rpm Constant torque 25 Nm Speed range 0–5000 rpm - C-axis for main and counter spindle - TRANSMIT software for easy C-axis programming * Parts catcher for finished components * Sinumerik 840D * Chip conveyor with programmable ejection height of 1200 mm (type "hinged belt") * Integrated coolant system in the chip conveyor 1x high-pressure pump with 14 bar 1x high-pressure pump with 14 bar incl. 20 µm fine filter 2x flushing pumps with 3.7 bar * Control cabinet air conditioning unit * Electrostatic oil mist separator * Hydraulic unit * Machine light * Interface for foot switch * Documentation Lrjdpfx Aexz Ab Roa Hoi Includes: - Manual handwheel - PC keyboard - Network preparation - Tool monitoring - Safety window - Cleaning air gun - Signal lamp Year of manufacture: 2008 Machine No.: R7AW0401