Radiálna Vŕtačka kúpiť použité (1 570)

Stav: ako nová (výstavný stroj), Rok výroby: 2024, Optimum OPTIdrill RD 6 Precision radial drilling machine, heavy-duty design, top-tier quality. Ideal for versatile use in single-piece and series production environments. • Versatile application areas, e.g. drilling, reaming, thread cutting • Electrically braked motor • 24V DC electrics and dual-channel safety circuit according to DIN EN 12717 • Heavy, solid, high-quality grey cast iron • Wide reach due to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and traversing axes • Elaborately engineered column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and elevating spindle • Drill head gearbox runs in oil bath • Boom guideways are hardened and precision ground • Transmission gears made from hardened and precision-ground chrome-nickel steel for quiet and uniform operation • Drill head and column can be clamped or released together or separately • Forward and reverse operation • Solid, highly accurate, large-sized drill table • Hardened and ground clamping table with parallel T-slots • Machine lamp • Overload protection • Thick-walled cast column ensures smooth operation and high stability • LED lamp • Coolant system with integrated coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter: 320 mm Length approx.: 2670 mm Width/depth approx.: 1120 mm Height approx.: 2760 mm Weight approx.: 3200 kg Boom Swivel angle: 180° Drilling Capacity Drilling capacity in steel (S235JR): 50 mm Continuous drilling capacity in steel (S235JR): 45 mm Drill Table T-slot size: 14 mm Number of T-slots: 4 T-slot spacing: 180 mm Spindle-to-table max.: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Clamping table number of T-slots: 3 Clamping table T-slot spacing: 150 mm Spindle-to-clamping table min.: 0 mm Spindle-to-clamping table max.: 910 mm Spindle-to-drilling table min.: 465 mm Speed Range Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical Data Total connected load: 6.5 kW Knodpfx Afjwa Tc Sozjd Supply voltage: 400 V Mains frequency: 50 Hz Machine Base Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Drive power spindle motor: 4 kW Drive power boom lift motor: 1.5 kW Coolant pump drive motor output: 90 W Hydraulic clamping drive: 0.75 kW Spindle Quill stroke: 270 mm Spindle taper: MT5 Quill feed rate: 0.06 – 0.2 mm/rev Number of quill feed rates: 3 Travel Drill head travel (horizontal): 1250 mm Boom stroke (vertical): 680 mm Spindle-to-column max.: 1600 mm Spindle-to-column min.: 350 mm

Stav: vyžaduje opravu (použité), STANKO 2 A 554 The machine is in fully functional condition except for the clamping device of the jib hoisting mechanism, and is currently still in operation. The clamping unit needs to be assembled and readjusted; all parts are present. For safety reasons, the jib is secured with a tension belt, and the hoist clamping system is currently locked. Technical Data: - Drilling capacity: 60 mm - Arm reach: 1600 mm - Spindle taper: MT 5 - Spindle stroke: 390 mm - Spindle speeds: 20 steps, 20 - 2000 rpm - Right and left rotation - Feed: 12 steps, 0.056 - 2.5 mm/rev - Drive: 400 V / 12.8 kW - Arm and drilling unit clamping: electromechanical - Distance, machined bed to drilling quill: min. approx. 900 mm, max. approx. 1600 mm - Usable machine bed with 4 T-slots: 950 x 1700 mm - Coolant system Kjdpfotpu Tqjx Afzond - Cube table - Required floor space: approx. W 2600 x H 3000 x D 1000 mm - Weight: approx. 4500 kg

Stav: dobrý (použitý), Rýchlobežná radiálna vŕtačka - DONAU DR 23 - Vŕtacia kapacita / oceľ cca 28 mm - Vyloženie cca 700 mm - Morse kužeľ MK 3 - Rozsah otáčok 70-1550 ot./min - prostredníctvom prevodovky - Rozsah posuvu 0,075-0,3 mm - Hĺbka vŕtania cca 130 mm - Zariadenie na rezanie závitov - Hydraulické upínanie - Dokumentácia Rozmery: D x Š x V: 2 x 1,7 x 1,9 metra / Hmotnosť 1900 kg Kedpfswncckex Afzond Chyby a preklepy vyhradené

Stav: dobrý (použitý), Rok výroby: 1965, Funkcionalita: plne funkčný, hĺbka hrdla: 930 mm, For sale: Donau DR30 Rapid Radial Drilling Machine The machine is in good, fully operational condition. Technical Data: Year of manufacture: 1965 Drilling capacity in steel (diameter): approx. 30 mm Thread cutting capacity in steel: approx. M36 in cast iron Spindle taper: MK 3 Spindle speeds: Infinitely variable, approx. 45 – 2240 rpm Quill stroke: approx. 170 mm Arm reach: approx. 930 mm Arm swivel range: 360° Table size: 1200 x 500 mm Spindle motor power: 4.0 kW Weight: approx. 1.8 t Dimensions (L x W x H): approx. 1.3 x 2.1 x 2.45 m Thread cutting device with automatic stop and reverse. Motorized arm height adjustment. Left-hand drilling control via hand and foot switch. Transport and loading can be organized Europe-wide at extra charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale Knedpfxewal Hpo Afzjd BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Stav: generálne opravený (použitý), Rok výroby: 1983, Pracovný stôl 600 mm x 1200 mm Vyloženie ramena 600 mm Držiak nástrojov MK 4 Vŕtacia kapacita 32 mm v oceli Zariadenie na rezanie závitov Chladiace zariadenie Elektrika riadiaceho napätia 24 V Núdzové zastavenie - dvojkanálové Ochranné zariadenie na vŕtačke Generálna oprava v roku 2025 Knjdpfsmt Ed Rex Afzsd 12 mesiacov záruka Nový náter RAL 7035/7031

Stav: neskontrolované (použité), Funkcionalita: neoverené, číslo stroja/vozidla: 6104, vŕtacia kapacita: 40 mm, maximálna rýchlosť vretena: 2 800 ot./min, ťah perom: 200 mm, dĺžka stola: 1 200 mm, výška stola: 820 mm, šírka stola: 600 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the specified period from 28.07.2025 to 31.07.2025. TECHNICAL DETAILS Machining data: Drilling capacity in solid (St 60): Ø 40 mm Drilling capacity in solid (GG 22): Ø 50 mm Thread cutting (St 60): M 36 Thread cutting (GG 22): M 45 Dimensions and travels: Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1,200 mm x 600 mm Number of T-slots: 4 T-slots (DIN 650): 18 H7 T-slot spacing: 125 mm Spindle nose to table distance: 185 mm Spindle nose to base plate (min.): 985 mm Spindle nose to base plate (max.): 1,595 mm Drilling radius: 540 – 1,290 mm Swivel range: 330° Work table height: 820 mm Quill stroke: 200 mm Column travel: 410 mm Table: Table length: 1,200 mm Table height: 820 mm Table width: 600 mm Rapid traverse: X-axis (at 1,000 mm drilling radius): 5 m/min Y-axis: 4 m/min Spindle: Speed range: 15 – 2,800 rpm Feeds (stepless): 5 – 2,000 mm/min Accuracy as per manufacturer: Positioning accuracy X/Y-axis: ±0.075 mm Repeatability X/Y-axis: ±0.015 mm Backlash over entire table area: 0.02 mm Positioning accuracy Z-axis: ±0.085 mm Repeatability Z-axis: ±0.03 mm MACHINE DETAILS Overall height: 2,500 mm Overall width: 1,400 mm Overall length: 2,500 mm Total weight: 3,000 kg Kedpfxowvi I Nj Afzend EQUIPMENT - Two-axis digital display

Stav: pripravené na použitie (použité), Priemer vŕtania: 75 mm, priemer vŕtacej vretena: 114 mm, upínanie vretena: MK5, zdvih vretena: 500 mm, otáčky: 1400 ot./min. Upínacia plocha hore: 750 mm / 1000 mm, upínacia plocha bočne: 530 mm / 1000 mm, základná doska: 1000 mm / 1600 mm, nastavenie ramena: 1000 mm, natočenie ramena: 360°. Vzdialenosť stred vretena – stĺp: 600 mm / 1600 mm, vzdialenosť stred vretena – stôl: 800 mm / 1800 mm. Dokumentácia k dispozícii. Osobná obhliadka na mieste možná. Knodpfxsw Extme Afzod

Stav: dobrý (použitý), Rok výroby: 1983, Stock number: 3005 Knsdpfxswu Ilwe Afzed Manufacturer: HKS Singen Year of manufacture: 1983 Machine number: 401044 Model: HKS 40 Drilling capacity: 40 mm Spindle taper: MK 4 Speed range: 26 to 1,940 rpm Feed: 0.05 to 0.45 mm/rev Table size: 1,520 x 740 mm Clamping area: 1,370 x 610 mm Arm reach min/max: 400 / 1,120 mm Stroke: 200 mm Swivel range: 360° Vertical arm adjustment: mm Horizontal arm adjustment: 720 mm Accessories: Connection: 6.5 kW Footprint: 1,500 x 1,100 mm Second plate: 1,500 x 1,000 mm Dimensions: 1,800 x 1,600 x 2,700 mm Weight: 2.3 t

Stav: dobrý (použitý), DONAU DR 40 Z - High-Speed Radial Drilling Machine incl. Tooling - Spindle taper: MK 4 - Quill diameter: 55 mm - Quill stroke: 220 mm - 18 spindle speeds: 35-1800 rpm - Drilling feeds: 0.075 - 0.60 mm/rev - Drilling column height adjustment: 450 mm - Drilling radius min/max: 305-1005 mm - Table size: 1200x600 mm - Drilling capacity (steel): 40 mm - Drilling capacity (cast iron): 50 mm Knsdpfxsw En Slo Afzjd - Tapping attachment (steel): M33 - Tapping capacity (cast iron): M45 - Various tools included - see pictures Dimensions: LxWxH: 1.9 x 2.3 x 2.8 meters / Weight: 1,800 kg Subject to errors and input mistakes

Stav: použitý, Rok výroby: 1983, Vrtací výkon v oceli (-Ø 50 mm) Výložník 1500 mm Výška obrobku - max. 1380 mm Vrtací výkon v liatine (-Ø 60 mm) Vzdialenosť od stredu vretena po stĺp 320 - 1250 mm Rozsah natočenia +/- 180° Upínacia plocha základnej dosky 2640 x 1000 mm Krútiaci moment na vretene 310 Nm Priemer vrtacieho vretena / upnutie 75 mm / MK 5 Knsdpjtv Iklsfx Afzod Zdvih vrtacieho vretena 310 mm Otáčky vretena 28 - 2500 ot./min Posuv: 0,05 - 2 mm/ot Výkon pohonu 4 kW Hmotnosť stroja cca 4,3 t Potrebný priestor cca 3,2 x 1 x 2,75 m Kockový stôl 500 x 500 x 500 mm,

Stav: generálne opravený (použitý), Rok výroby: 1976, Work table 500mm x 1200mm Arm travel 600mm Kodpfx Aownn S Refzjnd Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Coolant system Electrics 24V control voltage Emergency stop, dual-channel Safety guard on drill Completely overhauled in 2025 12 months warranty New paint finish, RAL 7035/7031

Stav: použitý, Rok výroby: 1989, Drilling capacity in steel (diameter): 55 mm Arm reach: 2005 mm Maximum workpiece height: 1500 mm Table size: 1500 x 800 mm Spindle taper: MK 5 Spindle speeds: 30–1200 rpm Feed range: 0.06 – 1.0 mm/rev Horizontal arm adjustment: 495 – 2,000 mm Vertical arm adjustment: 505 – 1670 mm Spindle stroke: 310 mm Column diameter: 360 mm Distance spindle / base plate: 825 – 1670 mm Drive power: 4.4 kW Operating voltage: 400 V Total power requirement: 7.2 kW Machine weight: approx. 4.5 t Space requirement: approx. 3.00 x 0.80 x 2.80 m Knsdpfjwvvbisx Afzod - Pole-changing motor with 2 speeds - Clockwise / counterclockwise rotation - Cube table

Stav: dobrý (použitý), 1 used radial drilling machine Make: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Spindle taper: MT 6 Knodpfxstzctms Afzed Spindle travel: 390 mm Spindle speeds: 24 steps, 20 - 1400 rpm Right/left rotation Feed, 12 steps: 0.045 - 1.5 mm/rev Drive: 400 V / 14.5 kVA Electromechanical clamping of the arm and drilling unit Distance, machined machine bed – quill: min. approx. 400 mm max. approx. 1800 mm Usable machine bed with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Space requirement (approx.): L 2600 x H 3950 x W 1300 mm Weight: approx. 8500 kg

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Drilling capacity in steel (diameter): 32 mm Throat depth: 636 mm Maximum workpiece height: 720 mm Spindle speeds: 38 – 2000 rpm Thread cutting: 38 – 643 Stroke: 450 mm Maximum quill travel: 170 mm Kodpfx Afjwvl Irszend Total power requirement: 6 kW Machine weight approx.: 1.9 t Space requirement approx.: 2.5 x 1.5 x 2.2 m Left-/right-hand rotation, thread cutting device Continuously variable feed

Stav: dobrý (použitý), COLETT / GAMESA – mobile radial drilling machine, crane-mountable – Arm reach approx. 1200 mm – Universal angle head – Spindle speeds: 95 – 750 rpm – Automatic feeds – Morse taper MT 4 – Height-adjustable arm, approx. 1400 mm – Control cabinet – retrofitted Dimensions: LxWxH 2 x 1 x 2.1 meters / weight 1500 kg Ksdpfx Ajw Dpn Eefzsnd Errors and omissions excepted.

Stav: takmer ako nový (použitý), Radiálna vŕtačka MODEL: Z3063X20 Rok: 2007 Príslušenstvo: 2 otočné kocky / 1 zverák Maximálny priemer vŕtania: 63 mm Kjdpfjw Ihukox Afzsnd

Stav: generálne opravený (použitý), Rok výroby: 1996, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Dimensions and Travels Tool Holder: SK 40 Table Dimensions: 4000 x 800 mm Number of T-slots: 6 Distance Between T-slots: 140 mm Distance, Spindle Nose to Table Surface: min. 140 mm, max. 740 mm Drilling Radius: min. 540 mm, max. 1590 mm Travel U-Axis: 2600 mm Travel Y-Axis: 1050 mm Quill Stroke (Z-Axis): 200 mm Column Stroke (W-Axis): 400 mm Machining Capabilities Drilling Capacity, full material: St 60: 40 mm GG 22: 50 mm Thread Cutting: St 60: M 36 GG 22: M 42 Main Spindle Drive AC Motor, frequency controlled: 5.5 kW at 100% duty cycle Speed Range: 15 – 2800 rpm Torque: max. 250 Nm, constant from 15 – 200 rpm Feed Drives X-axis AC Servo Motor: 0.25 kW Y-axis AC Servo Motor: 0.25 kW Z-axis AC Servo Motor: 4.50 kW W-axis AC Servo Motor: 2.50 kW U-axis AC Servo Motor: 2.50 kW Rapid Traverse Rates (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid Traverse Rates (U/W): 7.5 / 3 m/min Stepless Feed Rate: 5 – 2000 mm/min Feed Force: 12000 N Accuracy Positioning Accuracy X, Y axis (over 1200 mm): ± 0.075 mm Repeatability X, Y axis: ± 0.03 mm Positioning Accuracy Z axis: ± 0.05 mm Repeatability Z axis: ± 0.03 mm Positioning Accuracy W axis: ± 0.05 mm Repeatability W axis: ± 0.03 mm Electrical Data Operating Voltage / Frequency: 400 V / 50 Hz Control Voltage: 24 V Total Connected Load: 13.0 kVA CNC Control Axes: 5 (X,Y,Z,W,U), expandable Screen: TFT flat panel, backlit, easily readable from all angles Position Display: Cartesian or polar, absolute or incremental values Unit: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: Up to 500 tools Subroutine Technology: Yes Machining Cycles: Centering, drilling, tapping, reaming, countersinking, boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip Breaking / Deburring: Possible in drilling cycles Drilling Patterns: Linear, circular, matrix Basic Software: Dialog programming, 38 zero-point shifts, rotation and mirror functions, teach-in for X/Y/Z, program restart with selection functions for targeted re-entry Zero Point Detection: Cycles for locating zero points by manually probing the workpiece for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts Knodpfx Asv If T Tjfzod - Angular position detection on round parts via probing of reference edges or surfaces Data Interfaces: USB port Painting (New Paint) Standard paint finish, two-component textured paint Machine Upper Section: Light grey RAL 7035 Machine Base: Signal blue RAL 5005 Documentation Operating and programming manual Electrical wiring diagram Spare parts drawings Test protocols for mechanics, electrics, and safety devices

Stav: použitý, Rok výroby: 1997, Drilling capacity in steel (diameter): 40 mm Reach: 1,000 mm Knedpfxol Ha Twj Afzed Workpiece height – max.: 1,250 mm Table size: 1,150 x 690 mm Spindle taper: MT4 Spindle speeds: 40 – 1,400 rpm Feed range: 0.08 – 0.40 mm/min Horizontal arm adjustment: 800 mm Vertical arm adjustment: 700 mm Spindle stroke: 220 mm Drive power: 3.5 kW Operating voltage: 380 V Total power requirement: 4.0 kW Machine weight: approx. 1.6 t - Factory No.: A01/446/97 - Adjustable cube table, 600 x 500 x 500 mm - Coolant system - Machine lamp

Stav: dobrý (použitý), Funkcionalita: plne funkčný, ťah perom: 190 mm, otáčky vretena (min.): 41 ot./min, maximálna rýchlosť vretena: 1 800 ot./min, celková hmotnosť: 1 920 kg, hmotnosť obrobku (max.): 17 kg, max. hrúbka oceľového plechu: 32 mm, krútiaci moment: 250 Nm, výška stola: 900 mm, Used DONAU rapid radial drilling machine Type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE TOP (clamping area 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet for relieving the table frame) Technical specifications: Drilling capacity (solid material): St 60/E335 mm Ø 32 (at feed 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MT4 Knsdpfx Aforn Riqjzed Column diameter: mm Ø 195 Distance spindle nose-table: min./max. mm 260/660 Worktable height: mm 900 Quill travel: mm 190 Column travel: mm 400 Spindle speeds, range I: rpm 41-1800 Feeds: mm/rev 0.1-0; 15-0; 20-0.3 Torque at spindle: max. Nm 250 Boom ease of movement: Radial N 25 Boom ease of movement: Axial N 25 Clamping force: Radial Nm 3500 Clamping force: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: Max. table load: kg 1000 Center of gravity: centered on working surface

Stav: použitý, Rok výroby: 1970, Drilling capacity in steel (diameter): 50 mm Knodpevh Nbhsfx Afzjd Arm reach: 1250 mm Workpiece height – max.: approx. 1150 mm Drilling capacity in cast iron: 60 mm Spindle taper: MT 5 Spindle speeds: 25 – 2000 rpm Feeds: 0.06 – 0.5 mm/rev Vertical arm adjustment: 620 mm Column diameter: 350 mm Total power requirement: 7.5 kW Machine weight: approx. 4.6 t Machine dimensions (L x W x H): 2.50 x 1.08 x 2.50 m Accessories: cube table (L x W x H = 1100 x 700 x 550 mm), coolant pump

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Knedsu Aa I Sjpfx Afzed Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: použitý, Drilling capacity in steel (diameter): 120 mm Arm reach: 2500 mm Workpiece height, max.: approx. 1800 mm Drilling capacity in cast iron: 160 mm Drilling radius min./max.: 880 / 2825 mm Minimum arm reach: 555 mm Column diameter: 650 mm Drill spindle diameter / Taper: 90 mm / MT 6 Quill diameter: 160 mm Spindle speed: 10 - 660 rpm Knodpfx Aovh Ncxofzsd Drilling depth: 650 mm Feeds: 0.07 - 3.0 mm/rev Distance spindle/base plate min. 300 / max. 2100 mm Vertical travel of arm: 1150 mm Clamping surface of base plate: 3000 x 1550 mm Total height of machine: 4500 mm Total power requirement: 15 kW Machine weight approx.: 16 t - Spindle right/left rotation - Thread cutting device Accessories: Digital HEIDENHAIN on X and Z axes (arm traverse and drilling depth)

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Knjdpfx Afevv Spkozsd Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Machine Version • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, at the rear of the machine base • 2 T-slots, 18 mm, on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min mm 70 Table top max. mm 680 Distance spindle nose – min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Performance Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axes over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, backlit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, values absolute or incremental Unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Knsdpfx Asrmkfnjfzed Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point shifts, rotation and mirroring, teach-in for X,Y,Z, program restart with selective re-entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Positioning of cast and flame-cut parts - Angle detection by probing reference edges/surfaces on round parts Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stav: generálne opravený (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, vŕtacia kapacita: 40 mm, ťah perom: 200 mm, priemer pinoly: 80 mm, Danumeric 440, fully overhauled and digitized in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Traverse path of arm: 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servomotor • 2 T-slots (18 mm) on rear machine base • 2 T-slots (18 mm) on left machine base • Tapping attachment • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table size: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle lower edge – table top min.: 70 mm, max.: 680 mm Distance spindle lower edge – floor min.: 970 mm, max.: 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Data Drilling capacity (solid): St 60 Ø40 mm, GG 22 Ø50 mm Thread cutting: St 60 M36, GG 22 M42 Main Spindle Drive AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2,800 rpm Torque: max. 250 Nm, constant from 15–2,000 rpm Feed Drives X-axis – AC servo motor: 0.25 kW Kjdpfx Afju Dg D Aezend Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W-axis): 3 m/min Infinitely variable feed: 5 – 2,000 mm/min Accuracy Positioning accuracy X, Y axes over 1,200 mm: ±0.075 mm Electrical Data Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight of Danumeric 440 (without packaging) with 1800 x 600 mm table: 2,800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, legible from all sides, 215 x 160 mm Position display: Cartesian or polar; absolute or incremental readings Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tooling suggestions based on machining type, material-dependent cutting data suggestions Tool management: Maximum 500 tools Subroutines: Yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable targeted entry functions Zero point determination: Cycles for determination of zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection on round parts via probing reference edges/faces Test-graphic: Graphic display of drilling patterns Data interfaces: USB