Weiler Commodor 75 kúpiť použité (183)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps Ijdpfx Afju Aftgspoa >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Priemer sústruženia nad lôžkom 330 mm Vzdialenosť medzi hrotmi 750 mm Otáčky vretena 1–4 500 ot/min Ovládanie: WEILER C3 Iedpfx Ajud Naqofpja Rôzne príslušenstvo MARCELS MASCHINEN CH

Stav: dobrý (použitý), Náhradné diely a príslušenstvo pre sústruhy WEILER Iodpfx Aexvn Hhsfpsa

Stav: použitý, Rok výroby: 1997, - Rok výroby: 1997 Ijdpfx Aownh I Ssfpoa - Dokumentácia k dispozícii: Áno - CE označenie prítomné: Áno - CE certifikát k dispozícii: Nie - Sériové číslo: 270 - Ovládanie: Teach-in - Výška stredov [mm]: 210 - Priemer sústruženia nad lôžkom [mm]: 420 - Vzdialenosť medzi hrotmi [mm]: 900 - Priemer vŕtania vretena [mm]: 55 - Min. otáčky vretena [rpm]: 4 - Max. otáčky vretena [rpm]: 3000 - Možnosti: Digitálny displej - Typ digitálneho displeja: Weiler Finančné informácie DPH: Uvedená cena je bez DPH DPH/režim rozdielu: DPH je odpočítateľná pre podnikateľov Dodanie a výkup kedykoľvek možné pre všetko zo sektora priemyslu Lukas van Rossum

Stav: pripravené na použitie (použité), Rok výroby: 1989, Funkcionalita: plne funkčný, Na predaj je sústruh značky Weiler, typ Primus LZ-GS. Stroj je vo veľmi dobrom stave. Technické údaje: Rok výroby: 1989 Číslo stroja: 4443 Ijdpfx Afeihig Ijpja Prevádzkové napätie: 380 V Výška hrotu: 120 mm Vzdialenosť medzi hrotmi: 430 mm Otáčky: 60 – 3000 ot/min v 18 prevodových stupňoch Priechod vretena: 23 mm Vreteno s kužeľom podľa DIN 55027 Konzola: MK 2 Posuvy: 0,03 až 0,15 mm/ot. Možné závity: metrické, palcové, modulové a s diametrálnym stúpaním Metrické závity: od 0,25 do 2,5 mm Rozmery: dĺžka 1,2 m, výška 1,3 m, hĺbka 0,65 m Ceny bez DPH. Obhliadka je možná po dohovore. Kontaktujte nás, náš tím Vám rád pomôže. Možný výkup alebo výmena! Nákup a predaj strojov NÁKUP / PREDAJ VÝROBNÝCH A KOVOOBRÁBACÍCH STROJOV A ĎALŠIEHO. Potrebujete kvalitný a cenovo dostupný stroj na obrábanie kovov do výroby? Alebo chcete svoj stroj predať? Viac informácií alebo kontaktné údaje nájdete na našej webovej stránke.

Stav: pripravené na použitie (použité), Weiler Primus sústruh Presný sústruh s príslušenstvom Weiler Primus sústruh: Výška hrotu: 125 mm Rozsah otáčok: 40-3000 ot./min Vzdialenosť medzi hrotmi: 400 mm Priechod vretena: 24 mm Príslušenstvo: 35 ks upínacích klieští Skľučovadlo 4 ks držiakov Multifix Skrinka na príslušenstvo Ďalšie príslušenstvo viď fotografie Iedpfx Asxw R N Uofpea Radi vás privítame na obhliadke. Na požiadanie vám zabezpečíme aj cenovo výhodnú prepravu! Obdržíte riadnu faktúru. Pre zahraničných zákazníkov je možné vystaviť faktúru bez DPH, podmienkou je platné IČ DPH. Predaj vyhradený do vypredania zásob. Navštívte náš obchod a pozrite si aj naše ďalšie ponuky. Uvedené obchodné mená a ochranné známky patria ich majiteľom a slúžia len na identifikáciu a popis produktov. Možné odchýlky v technických údajoch a chyby v popise vyhradené.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: Ijdpfx Afsvtp Edepsa >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: použitý, Rok výroby: 2008, Priemer sústruženia: 720 mm Dĺžka sústruženia: 3000 mm Výška hrotu: 360 mm Priemer vretienkovej diery: 106 mm Rozsah otáčok: 1 - 1800 ot./min Upínanie pinoly koníka: MK 6 Maximálna hmotnosť obrobku: 3800 kg Celkový príkon: 36 kW Hmotnosť stroja cca: 6100 kg Plošné nároky cca: 4800 x 2450 x 2000 mm CNC sústruh – cyklické riadenie Výbava: - Dopravník triesok - Chladiace zariadenie - 3-čeľusťové skľučovadlo Ø630 mm - Rýchloupínací držiak nástrojov MULTI-FIX - Otočný hrot (sústruženie s podporným hrotom) - Strojová lampa Ijdpsw A Sqmsfx Afpja

Stav: použitý, Technické detaily: Maximálny priemer sústruženia nad lôžkom: 570 mm Maximálny priemer sústruženia nad suportom: 340 mm Dĺžka sústruženia: 1000 mm Prevádzkové hodiny: 37 917 h Vzdialenosť medzi hrotmi: 1000 mm Maximálny obehový priemer nad lôžkom: 570 mm Maximálny obehový priemer nad čelným suportom: 340 mm Výška hrotu: 280 mm Vretenový otvor: Ø 66 mm Otáčky vretena: 1 - 625 plynulo nastaviteľné ot./min Krútiaci moment na vretene: 1600 Nm Pozdĺžne posuvy: 0 - 20 mm/ot. Priečne posuvy: 0 - 20 mm/ot. Vysunutie pinoly koníka: 160 mm Pinola koníka: MK 5 mm Celková potreba výkonu: 20 kW Hmotnosť stroja cca: 3,2 t Rozmery stroja cca (DxŠxV): 2,9 x 2,28 x 1,8 m Stroj bol repasovaný: prepracovaný guľôčkový skrutkový pohon osi Z, prepracovaná koncová poloha osi X, nový lak. Konvenčná konštrukcia s integrovanou cyklovou automatikou. Rezanie závitov: metrické, palcové, DP závity. Dopravník triesok nie je k dispozícii. 4-čeľusťové skľučovadlo s lunetou je k dispozícii. Iodexg Nhnopfx Afpea Namontované 3-čeľusťové skľučovadlo.

Rok výroby: 1977, Stav: použitý, Weiler Matador lathe, year of manufacture approx. 1977, with three-jaw chuck and Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Iedsnkad Sspfx Afpsa

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm Ijdpsxw H Dbjfx Afpsa - Rozsah otáčok: 40-3000 ot./min - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou - Štvorklauzové skľučovadlo - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená.

Stav: použitý, Priemer sústruženia nad lôžkom: 370 mm Priemer sústruženia nad suportom: 200 mm Dĺžka sústruženia: 1000 mm Výška hrotov: 185 mm Priechod vretena: 56 mm Upnutie pinoly koníka: MK 4 Iedsxfwckjpfx Afpsa Otáčky: 50 - 2000 ot/min Príkon pohonu: 4,0 kW Hmotnosť stroja: cca 1,4 t Priestorové nároky: cca 2,3 x 1,1 x 1,3 m Sústruh s vodicou a ťahovou skrutkou Trojčeľusťové skľučovadlo 200 mm Držiak nožov Multifix veľ. B 3 ks Multifix kazety Zariadenie núdzového zastavenia

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe in very good original condition!!! Iedpjwkh Abjfx Afpoa Technical data: - Year of manufacture: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Speed range: 60 - 3,000 rpm in 18 gearbox steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: MT 2 - Feed range: 0.03 to 0.15 mm/rev - Thread types: Metric, Whitworth, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 2.5 mm - Switchable spindle brake - Weight: approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and equipment: - Brand new collet chuck set, new collets from 3 to 25 mm - 1 three-jaw chuck with 2 sets of jaws - Multifix size A toolpost with 2 toolholders About the machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The bedways are in very good condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: použitý, Rok výroby: 1986, Technické detaily: Priemer otáčania nad lôžkom: 320 mm Priemer otáčania nad suportom: 198 mm Dĺžka sústruženia: 650 mm Iedpfx Afowt Auwjpsa Celkový príkon: 2,2 kW Hmotnosť stroja cca: 650 kg Potrebné rozmery cca: 1700x1000x1700 mm Digitálny odpočet: 3-osý Heidenhain ND 780 Priemer priechodu tyče: Ø 40 mm Rozsah otáčok: 96 - 2500 ot./min Vretenová hlava: A 2 - 5 Rozsah posuvov: 0,007 - 0,63 mm/ot. Vhodné na závity: metrické 0,25 - 8 mm, palcové 80 - 2 záv./palec, diametrálne stúpanie 200 - 5 Dp, modul 0,2 - 4 Koník: MK 3 3-čeľusťové skľučovadlo: 160 mm Príslušenstvo: Rôzne upínacie kľúče Strojové nohy Kryt L + Z vretena Výbava: Rýchloupínací oceľový držiak Multifix typ B Udržiavaný dielenský sústruh zo súkromného vlastníctva bez DPH.

Rok výroby: 1973, Stav: veľmi dobrý (použitý), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R Precision Mechanic Lathe Type MDU Ijdpjxpxqwsfx Afpea Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning diameter over cross slide 140 mm Max. swing diameter over bed 260 mm Centre distance 500 mm Spindle bore 28 mm Range 1 – Spindle speeds: 220-1,800 rpm Range 2 – Spindle speeds: 110-3600 rpm Spindle drive kW Total drive kW - V - Hz Weight 500 kg Accessories / Special Equipment • Equipped with a 3-jaw chuck from RÖHM 110 mm diameter, mounted • Machine base with integrated tool storage and comprehensive accessory package, consisting of collet sets Condition : very good – demonstration ready, ideal for training workshops, maintenance, etc. Please click here for a video of the machine: MDU260/4 Delivery : ex stock - as inspected Payment : strictly net upon collection - after receipt of invoice

Stav: veľmi dobrý (použitý), Rok výroby: 1990, Funkcionalita: plne funkčný, L+Z Lathe WEILER Praktikant 160 – Partially Refurbished Machine in very good used condition – Delivery on request, delivery time by arrangement! ✅ Technical Data Iedpfxexl Eyds Afpsa Year of manufacture: approx. 1990 Digital readout: 3 axes (NEW) Max. turning diameter over bed: approx. Ø 320 mm Max. turning diameter over cross slide: approx. Ø 198 mm Max. turning length: approx. 650 mm Bar capacity: approx. Ø 40 mm Spindle speed: 96 – 2500 rpm Spindle nose: A 2 - 5 Drive power: approx. 2.2 kW Thread cutting: metric, inch, DP, module Tailstock: MT 3 Dimensions (LxWxH): approx. 1700 x 1000 x 1700 mm Weight: approx. 650 kg ✅ Equipment 3-jaw chuck 160 mm (NEW) Quick-change toolpost + 1 insert Electric chuck guard (NEW) Work lamp (NEW) Complete machine documentation Emergency stop Various chuck keys Coolant system L+Z spindle guard Machine feet Optional: additional quick-change tool holders, drill chuck, revolving centre, collet chuck 386E + collet set 386E (NEW) Transport, installation & commissioning optionally available ✅ Condition Machine partially overhauled Very good used condition Delivery on request – delivery time by arrangement (subject to prior sale)

Stav: dobrý (použitý), Funkcionalita: plne funkčný, used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Ijdpfx Asvadqzjfpoa Year of manufacture: approx. 1987 Centre distance: 750 mm Swing diameter over bed: Ø 330 mm Centre height over bed: 165 mm Swing diameter over cross slide: Ø 180 mm Centre height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 - 2800 rpm (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main motor, stages 1+2) Power supply: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Features & Accessories: - Heidenhain 3-axis digital readout, type VRZ 750 - Quick-change collet chuck and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost size B - LED work light - Bed stop - Automatic longitudinal and face feeds - Electromechanical spindle brake, selectable - 2x Emergency stop - Electric chuck key detection (via sleeve with pushbutton) - Coolant tank with pump in machine base - Foldable chuck guard - Splash guard - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This newer generation of Weiler lathes is very operator-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Subject to prior sale.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: Iodjvkfhpspfx Afpja For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: Ijdpevivmyofx Afpja >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, Weiler center lathe model Condor B, lead and feed screw lathe with new K&C 3-axis digital readout, CE compliant! Technical data: - Machine No.: 2442, Year of manufacture: 1997 Iodpfxjxcuaze Afpsa - Center height: 165 mm - Center distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Camlock spindle nose DIN 55027, size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread types: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Electrically engageable spindle brake - Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Equipment & accessories: - New K&C 3-axis digital readout with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tooling program for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal - 1 piece NEW 160 mm 3-jaw chuck with 2 sets of jaws - 1 piece 200 mm 4-jaw chuck with 1 set of jaws - NEW collet chuck and NEW collet set from 3 to 25 mm in 1 mm increments - Multifix size B with 2 tool holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Safety equipment: electronic spindle guard, 2 emergency stop buttons, change gear box with end switch, spindle brake About the machine: For sale is a Weiler Condor in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our location.

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: Ijdpfx Afsw Idlljpea For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: Ijdpfx Aewrmuxefpoa >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake Isdpfx Aow Nw Dqjfpoa About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: >> Year of manufacture: 1983 Machine No. 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW 3-axis digital readout from K&C, 12-month manufacturer warranty with instruction manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, increment 1 mm >> Multifix size B with 3 tool holders >> Electronic spindle protection Isdpewb Supsfx Afpja >> Rear splash guard >> Coolant system >> Machine feet About the Machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new 3-axis digital readout from K&C makes operation easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power on site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Isdpexu Hlasfx Afpea Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety features: >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.