Weiler Primus Vc kúpiť použité (181)

Stav: použitý, Rok výroby: 1999, Funkcionalita: plne funkčný, Sústruh Weiler Primus VC, rok výroby 1999, s trojosou digitálnou indikáciou Siemens, trojčeľusťovým skľučovadlom, Multifixom, zadným krytom proti striekaniu a elektrickým krytom skľučovadla. Stroj je v dobrom, prevádzkyschopnom stave, po dohode možná prezentácia pod prúdom. Bljdpfxjx Afvgo Afwjr

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm Bledpfx Afew Idlljwsr >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.

Stav: dobrý (použitý), Rok výroby: 2000, Weiler Primus VC, Year of manufacture: 2000, Digital readout, Centres distance: 500 mm, Max. turning diameter over cross slide: 150 mm, Spindle speed up to 4,000 rpm, Spindle bore: 40 mm, Spindle drive: 1.5 kW, Bsdpfev Ifxijx Afwjlr Multifix toolholder, 24 longitudinal feeds, Metric threads, Inch threads,

Stav: použitý, Rok výroby: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: WEILER LZS - Universal Lathe with Digital Readout Model PRIMUS VC Year of manufacture 1999 Center height 140 mm Max. turning Ø over cross slide 150 mm Max. swing Ø over bed 280 mm Center distance 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 face feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Total power consumption 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special features • SIEMENS 3-axis digital display with X-axis, Z-axis, and summing Z-axis on the compound rest • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, Ø 140 mm, mounted Bledpfxjvm Dv Ds Afwer • Machine base cabinet for tool storage with integrated control cabinet and coolant system • Operating manuals Condition : Very good – ready for demonstration Ideal for training workshops Delivery : ex stock, as inspected Payment : strictly net upon collection – after receipt of invoice We kindly request your order. Further lathes of all sizes available in stock – please inquire.

Stav: generálne opravený (použitý), Rok výroby: 2007, Universal lead and feed screw lathe Manufacturer: WEILER Model: Primus VC Year of manufacture: 2007 - overhauled newly painted RAL 7035 light grey Machine no.: CK17 Bodpjv D Ip Nefx Afwolr Centre height: 140 mm Centre distance: 500 mm Spindle bore: 40 mm with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital display SIEMENS - Chuck guard with electric interlock - Braked drive motor - Quick-change tool post, base body size A - Bed stop - Covered lead and feed screw - Rear chip guard - Removable chip tray - Operating manual - Used, as is -

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 140 mm, dĺžka sústruženia: 500 mm, maximálna rýchlosť vretena: 4 000 ot./min, otáčky vretena (min.): 30 ot./min, otáčky (max.): 4 000 ot./min, otáčky (min.): 30 ot./min, Výbava: otáčky plynule nastaviteľné, Distance between centers: 500 mm Center height: 140 mm Spindle bore: 40 mm Speed: 30 - 4000 rpm Weight: approx. 800 kg Dimensions: approx. 1430 x 935 x 1550 mm Accessories: operating manual, lamp, Multifix toolpost, collet chuck system (at extra charge) Further accessories available on request Bljdpfx Afsvnr E Newsr

Stav: pripravené na použitie (použité), Rok výroby: 2006, Funkcionalita: plne funkčný, číslo stroja/vozidla: 864, výška stredu: 140 mm, šírka v strede: 500 mm, Stroj pochádza z konkurzu automobilového subdodávateľa – stroje sú aktuálne stále v prevádzke! TECHNICKÉ ÚDAJE Digitálny displej: áno Ovládanie: Siemens Sicomp IMC 05 Výška hrotu: 140 mm Vzdialenosť medzi hrotmi: 500 mm Upínací systém Trojčeľusťové skľučovadlo: áno Rýchloupínač: áno Koník Typ: existuje Ďalšie informácie podľa výrobcu – bez záruky Vzdialenosť medzi hrotmi: 500 mm Výška hrotu: 140 mm Priemer obrobku nad lôžkom: 280 mm Priemer obrobku nad suportom: 150 mm Hlavné vreteno Vretenová hlava podľa DIN ISO 702-3: veľkosť 5 Priemer vretena vo vnútornom ložisku: 70 mm Priemer vretenového otvoru: 43 mm Vnútorná kužeľová hĺbka hlavného vretena: 50 mm Hlavný pohon Výkon pohonu (100 % pracovného zaťaženia): 4 kW Rozsah otáčok: 30 – 4 000 ot./min Počet stupňov: 1 Počet rozsahov otáčok: plynulý Podávací pohon Počet posuvov: 24 Rozsah posuvov pozdĺžne/priečne: 0,02 – 0,63 mm/ot / 0,006 – 0,2 mm/ot Oblasť rezania závitov Metrické závity: 0,25 – 8 mm Palcové závity: 80 – 2 TPI Koník Priemer pinoly: 40 mm Vysunutie pinoly: 85 mm Upínanie kužeľa pinoly: MT 3 Bodpev N Inisfx Afwelr Rozmery stroja Dĺžka x šírka x výška: 1.570 x 890 x 1.700 mm Hmotnosť: 1.050 kg

Stav: veľmi dobrý (použitý), Rok výroby: 2011, Weiler Primus VC presný sústruh Rok výroby: 2011 Technické údaje Maximálny priemer sústruženia: 250 mm Maximálna dĺžka sústruženia: 500 mm Výška hrotu: 140 mm Priemer obrobku nad ložom: 280 mm Max. priemer prekyvu nad suportom: 150 mm Hlavné vreteno: Rozsah otáčok hlavného vretena: 30 – 4 000 ot./min Výkon: 4,0 kW Počet stupňov prevodovky: 1 Upínacie čelo vretena: 5 / DIN 55027 Priemer vretena v čelnom ložisku: 70 mm Priemer priechodného otvoru vretena: 40 mm Použiteľný priemer tyče: 40 mm Držiak náradia: Systém: MultiFix B Priečny prierez držiaka noža: 20 x 20 mm Koník: Pohyb pinoly: 85 mm Priemer pinoly: 40 mm Kužeľ pinoly: MK 3 Posuvy: Počet posuvov: 24 Pozdĺžny posuv: 0,02 – 0,63 mm/otáčka Priečny posuv: 0,006 – 0,2 mm/otáčka Rezanie závitov: Metri cké: 0,25 – 8 mm Palcové: 80-2 1/'' Počet pojazdov: Pojazd v osi X (priečny suport): 150 mm Pojazd v osi Z cez suport: 500 mm Pojazd v osi Z cez horný suport: 110 mm Celkový príkon: 15 kVA Hmotnosť stroja: cca 800 kg Priestorové nároky: 1400 x 935 x 1550 mm Príslušenstvo / možnosti: - Dokumentácia - 3-čeľusťové skľučovadlo priemer 160 mm, s čeľusťami - 4-čeľusťové skľučovadlo priemer 160 mm, s čeľusťami - Skľučovadlo na upínanie klieštin, vrátane klieštin - Koník - Multifix držiak s kompletom držiakov - Luneta - Prevodové kolesá - Rôzne druhy náradia - Skrinka Lista - Náhradné diely Blodpfew Ebdbsx Afwsr - atď. Stroj je pod prúdom v našom sklade.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: Blodpfou Aftgox Afwjr For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: pripravené na použitie (použité), Weiler Primus sústruh Presný sústruh s príslušenstvom Weiler Primus sústruh: Výška hrotu: 125 mm Rozsah otáčok: 40-3000 ot./min Vzdialenosť medzi hrotmi: 400 mm Priechod vretena: 24 mm Príslušenstvo: 35 ks upínacích klieští Skľučovadlo 4 ks držiakov Multifix Skrinka na príslušenstvo Ďalšie príslušenstvo viď fotografie Radi vás privítame na obhliadke. Na požiadanie vám zabezpečíme aj cenovo výhodnú prepravu! Bljdpfx Afoxw R N Uewjr Obdržíte riadnu faktúru. Pre zahraničných zákazníkov je možné vystaviť faktúru bez DPH, podmienkou je platné IČ DPH. Predaj vyhradený do vypredania zásob. Navštívte náš obchod a pozrite si aj naše ďalšie ponuky. Uvedené obchodné mená a ochranné známky patria ich majiteľom a slúžia len na identifikáciu a popis produktov. Možné odchýlky v technických údajoch a chyby v popise vyhradené.

Stav: veľmi dobrý (použitý), Paralelný sústruh WEILER typ PRIMUS Vzdialenosť medzi hrotmi: 400 mm Max. Ø nad lôžkom: 250 mm Max. Ø nad suportom: 130 mm Priemer vretena: 24 mm Revolverová hlava Multifix typ A Sklíčidlo 3-čeľusťové Ø 155 mm Závitovanie: metrické + Whitworth Koník: kužeľ CM2 Odsadzovací systém HEIDENHAIN ND522 Pozdĺžne a priečne posuvy: automatické, 2 osi Nový elektrický rozvádzač Dodávané s: 1 štvoročelisťovým sklíčidlom Ø 155 mm, 4 držiakmi nástrojov, 1 vŕtacím skľučovadlom Napätie: 380 V Rozmery (D x Š x V): 1300 x 900 x 1900 mm Hmotnosť: cca 500 kg Stroj vo VEĽMI DOBROM STAVE Bedpjxnp I Defx Afwslr

Rok výroby: 1986, Stav: použitý, Weiler Primus sústruh, rok výroby cca 1986, trojčeľusťové skľučovadlo, revolverové rýchloupínacie zariadenie Multifix. Stroj je v dobrom stave, po dohode je možné predviesť v chode pod napätím. Bledpfxen Ard Ds Afwjr

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself. Bsdpfx Afjvtp Edewelr

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws Bedpfxovivmyj Afwjlr >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: dobrý (použitý), Vzdialenosť medzi hrotmi: 450 mm Výška hrotu: 120 mm Priemer vŕtania vretena: 23 mm Otáčky: 40 – 3000 ot/min Bodpfsw I A Uxjx Afwelr Plynule nastaviteľný pohon s 3-stupňovou prevodovkou a digitálnym ukazovateľom otáčok Koník: MK 2 Výkon pohonu: 1,5 kW Hmotnosť: 350 kg Rozmery: 1200 x 650 x 1330 mm Lakovanie: Resedová zelená RAL 6011. Digitálny displej: Na požiadanie za príplatok Príslušenstvo: Ďalšie príslušenstvo na vyžiadanie

Stav: použitý, L + Z Lathe WEILER Type LZ PRIMUS GS Machine No. 2461 Year of manufacture approx. 1990 Center distance: 400 mm Swing over bed: 250 mm Center height over bed: 125 mm Swing over cross slide: 140 mm Center height over cross slide: 70 mm Spindle bore: 24 mm Spindle speed: 60 - 3000 rpm, 18 steps Feed: longitudinal and transverse Chuck flange: short taper DIN 55022 size 4 Tailstock taper: MK 2 Drive power: 1.1 kW and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital readout FAGOR, Type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw chuck RÖHM Ø 125 mm with stepped jaws - QUICK CHANGE TOOLPOST MULTIFIX with 1 tool holder - Collet set Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 mm - 1 center point for collet chuck - Emergency stop - Foldable chuck guard Bjdpfx Asrtd Uwefwjlr - Splash guard - Machine lamp - Electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Required floor space L x W x H: 1200 x 900 x 1560 mm Weight: 520 kg Good condition

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe in very good original condition!!! Technical data: - Year of manufacture: approx. 1992, Machine No. 4549 - Centre height: 120 mm - Centre distance: 430 mm - Speed range: 60 - 3,000 rpm in 18 gearbox steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: MT 2 - Feed range: 0.03 to 0.15 mm/rev - Thread types: Metric, Whitworth, Module, and Diametral Pitch - Metric thread pitches: 0.25 to 2.5 mm - Switchable spindle brake Blsdowkh Abepfx Afwor - Weight: approx. 360 kg - Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and equipment: - Brand new collet chuck set, new collets from 3 to 25 mm - 1 three-jaw chuck with 2 sets of jaws - Multifix size A toolpost with 2 toolholders About the machine: For sale is a Weiler Primus GS lead and feed screw lathe in very good original condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The bedways are in very good condition. Even at high speeds, the Weiler runs very quietly. The Primus was used in a training facility. This newer generation of Weiler lathes is extremely user-friendly and allows the production of ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see its condition for yourself.

Stav: pripravené na použitie (použité), Rok výroby: 1989, Funkcionalita: plne funkčný, Na predaj je sústruh značky Weiler, typ Primus LZ-GS. Stroj je vo veľmi dobrom stave. Technické údaje: Rok výroby: 1989 Číslo stroja: 4443 Prevádzkové napätie: 380 V Výška hrotu: 120 mm Vzdialenosť medzi hrotmi: 430 mm Otáčky: 60 – 3000 ot/min v 18 prevodových stupňoch Priechod vretena: 23 mm Vreteno s kužeľom podľa DIN 55027 Konzola: MK 2 Posuvy: 0,03 až 0,15 mm/ot. Možné závity: metrické, palcové, modulové a s diametrálnym stúpaním Metrické závity: od 0,25 do 2,5 mm Rozmery: dĺžka 1,2 m, výška 1,3 m, hĺbka 0,65 m Ceny bez DPH. Obhliadka je možná po dohovore. Kontaktujte nás, náš tím Vám rád pomôže. Možný výkup alebo výmena! Bsdjihig Ijpfx Afwslr Nákup a predaj strojov NÁKUP / PREDAJ VÝROBNÝCH A KOVOOBRÁBACÍCH STROJOV A ĎALŠIEHO. Potrebujete kvalitný a cenovo dostupný stroj na obrábanie kovov do výroby? Alebo chcete svoj stroj predať? Viac informácií alebo kontaktné údaje nájdete na našej webovej stránke.

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm - Rozsah otáčok: 40-3000 ot./min - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou - Štvorklauzové skľučovadlo - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená. Bedoxw H Dbjpfx Afwslr

Stav: nový, Rok výroby: 2025, CONDOR VC plus The new benchmark in the field of conventional precision lathes. A high-quality, powerful, and energy-efficient precision lathe designed for high-productivity applications in production and toolmaking, as well as in training and education environments. Premium quality, energy efficient, precise, and universally applicable in production, training, and further education. It convinces with: future-oriented technology maximum accuracy durability operator-friendly ergonomics minimal space requirements and a comprehensive range of accessories. The consistent and innovative further development of the well-established Condor series, this machine offers an economical and intelligent solution for your daily machining needs. Technical Data: WORKING AREA Center height: 180 mm Swing over bed: 360 mm Swing over cross slide: 190 mm Distance between centers: 800 mm SPINDLE Spindle nose DIN 55027/ISO 702-3: Size 6 Spindle bore: 57 mm Front bearing diameter: 90 mm MAIN DRIVE Drive power 60% / 100% duty cycle: – / 10.5 kW Spindle speed range: 25 – 4,000 rpm Speed steps: stepless FEED RANGE Number of feeds: stepless Longitudinal: 0.01 – 6 mm/rev Cross: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 50 mm Quill stroke: 110 mm Taper (DIN 228): MK 3 ACCEPTANCE ACCURACY: DIN 8605 Equipped with WEILER display system WTS 15 VC plus: - Large, clear 15" touchscreen (swivels and tilts; resolution 1366 x 768) - Operating screens can be switched by swipe gestures Bljdpfsqwipnex Afwor - Access functions via app manager - Operator panels can be freely configured, positioned, and scaled - Import drawings/sketches from PDF files via USB port, individually zoomable - Video-assisted machine maintenance - Contextual help menu (instead of WEILER VC plus screen display) Machine is located in our showroom in 71334 Waiblingen-Beinstein and available immediately. For details on equipment and accessories, please contact us.

Stav: dobrý (použitý), Rok výroby: 2012, Funkcionalita: plne funkčný, Weiler Praktikant VC Precíziós esztergagép Gyártó: Weiler Típus: Weiler Praktikant VC precíziós esztergagép Gyártási év: 2008 Állapot: használt, nagyon jó, gyárilag karbantartott és ellenőrzött, gyári vizsgálati jegyzőkönyvvel Műszaki adatok Esztergálási átmérő: 250 mm Esztergálási hossz: 650 mm Csúcsmagasság: 160 mm Ágykeresztszán feletti átmérő: 320 mm Planszán max átmérő: 190 mm Főorsó: Főorsó fordulatszám-tartomány: 30–4.000 ford./perc Főorsó hajtási teljesítmény: 10 / 6,0 kW Fokozatok száma: 1 Orsófej: 5 / DIN 55027 Főorsó átmérője első csapágyban: 70 mm Orsófurat: 40 mm Használható rúdátmérő: 40 mm Szerszámtartó: Rendszer: MultiFix B Esztergakéstartó keresztmetszete: 20 x 20 mm Szegnyereg: Blsdpsxd Tknofx Afwsr Tüskelöket: 85 mm Tüskediameter: 40 mm Szegnyereg befogás: MK 3 Előtolások: Előtolások száma: 24 Hosszanti előtolás: 0,02–0,63 mm/ford Sík előtolás: 0,006–0,2 mm/ford Menetvágás: Metrikus: 0,25–8 mm Coll: 80-2 1/” Modul: 0,25–4 mm Mozgáspályák: Planszán elmozdulás: 150 mm Felsőszán elmozdulás: 110 mm Elforgás: 180° Teljes teljesítményigény: 15 kVA Gép tömege: kb. 1,0 t Helyigény: kb. 2,5 x 2,0 x 2,0 m Tartozékok: – Weiler Praktikant VC precíziós esztergagép – Gépvilágítás – Dokumentáció – Hárompofás tokmány – Szegnyereg – Multifix szerszámbefogó – 8 db gépláb – Eredeti szerszámkészlet

Stav: veľmi dobrý (použitý), Rok výroby: 2008, incl. Schunk chuck Centre height: 160 mm Centre distance: 650 mm Bedpfxewk Dx Ss Afwjlr Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Possible thread types: Metric, Inch (Imperial), Module, Diametral Pitch Metric thread pitches: 0.25 - 8 mm Spindle brake: engageable Voltage: 400V Dimensions: approx. 1.60 x 1.00 x 1.50 m (L x H x W) Weight: approx. 750 kg

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Blodovkfhpspfx Afwjr Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: nový, Praktikant VC plus The new dimension in the field of conventional precision lathes. High-quality, energy-efficient, precise, and universally applicable for production, training, and further education. It impresses with: - Future-oriented technology - Maximum accuracy - Durability - Operator-friendly ergonomics - Minimal footprint - Comprehensive range of accessories The consistent and innovative further development of the proven Praktikant series offers an economical and intelligent solution for your daily applications. Technical Data: WORKING AREA Center height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Distance between centers: 650 mm SPINDLE Spindle nose DIN 55027/DIN ISO 702-3: Size 5 Spindle bore: 43 mm Spindle diameter in front bearing: 70 mm MAIN DRIVE Drive power 60% / 100% duty cycle: – / 8 kW Speed range: 25 – 5,000 rpm Number of speeds: stepless FEED RANGE Number: stepless Longitudinal feed: 0.01 – 6 mm/rev Cross feed: 0.003 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.1 – 20 mm TAILSTOCK Quill diameter: 40 mm Quill stroke: 85 mm Internal taper DIN 228: MK 3 ACCEPTANCE ACCURACY: DIN 8605 Blsdpfxjhw N Nto Afwjr Equipped with WEILER WTS 15 VC plus screen display - Large, clear 15" touchscreen, rotatable and swiveling, 1366 x 768 resolution - Switch between operating screens with swipe gestures - Access operating functions via app manager - Operator panels can be freely configured, positioned, and scaled - Drawing/sketch import from PDF files via USB interface, individually zoomable - Video-supported machine maintenance - Context-sensitive help menu (instead of WEILER VC plus screen display) - Coolant system, 18 liters incl. coolant pump The machine is located at our showroom in 71334 Waiblingen-Beinstein and is immediately available. For information regarding equipment, please contact us.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Bench Lathe – Excellent Condition! Technical Specifications: >> Machine No. 2801 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 – 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 55027 >> Tailstock: MT 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch possible >> Metric thread pitches: 0.25 to 2.5 mm >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and Equipment: >> 1 pc. Röhm 3-jaw chuck 125 mm with 4 sets of jaws >> Collet chuck assembly with collets from 2 mm to 12 mm (1 mm increments) incl. draw tube >> Multifix size A with 4 tool holders Blsdpfxov Tyzcs Afwjr >> Change gears >> Fixed steady rest >> Faceplate >> Spindle cover >> Clamping tools About the Machine: Offered is a Weiler Primus lead and feed screw bench lathe in excellent condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high spindle speeds, the Weiler runs smoothly. The Primus comes from a government facility where it saw little use. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and convince yourself of its condition. (The base cabinet is included; the machine is not bolted to the cabinet). Digital readout available at extra cost.