Weiler E 35 kúpiť použité (181)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm Gjdpfxju Aftge Aamoip >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Gijdpfxevtp Edo Aamop Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws Gedpfx Aasvivmysmjip >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Gisdpswrmuxefx Aamop Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: Gsdpjw Nw Dqsfx Aameip >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck Gijdsxu Hlajpfx Aamop >> Live center Safety features: >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.

Stav: dobrý (použitý), Rok výroby: 1988, Weiler lathe Model Condor B 2-axis digital readout Center height: 165 mm Center distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2,800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp Gsdpfx Ajvgmbvsamjip Automatic longitudinal and face feed Spindle brake - Hinged chuck guard - Splash guard Weight: approx. 1,040 kg 3-jaw chuck Multifix B quick-change toolpost Live center

Rok výroby: 1973, stav: veľmi dobrý (použitý), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R Precision Mechanic Lathe Type MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning diameter over cross slide 140 mm Max. swing diameter over bed 260 mm Centre distance 500 mm Spindle bore 28 mm Range 1 – Spindle speeds: 220-1,800 rpm Range 2 – Spindle speeds: 110-3600 rpm Spindle drive kW Total drive kW - V - Hz Weight 500 kg Accessories / Special Equipment • Equipped with a 3-jaw chuck from RÖHM 110 mm diameter, mounted • Machine base with integrated tool storage and comprehensive accessory package, consisting of collet sets Condition : very good – demonstration ready, ideal for training workshops, maintenance, etc. Please click here for a video of the machine: MDU260/4 Giodpfx Aaexpxqwsmop Delivery : ex stock - as inspected Payment : strictly net upon collection - after receipt of invoice

Stav: dobrý (použitý), Vedený a vretenový sústruh WEILER PRAKTIKANT 800 R - Priemer sústruženia nad lôžkom: 300 mm - Priemer sústruženia nad suportom: 150 mm - Dĺžka sústruženia: 800 mm - Priechod vretien: 42 mm Gsdpfxex A Ukte Aamjip - Rozsah otáčok vretena: 40 – 2000 ot./min - Automatické pozdĺžne / priečne posuvy - Rezanie závitov: metrický / palcový atď. - Koník: MK 3 - Trojčeľustové skľučovadlo - Ochranná stena proti trieskam + pracovné osvetlenie - Vanička na triesky - Výmenné ozubené kolesá - Skrinka na náradie - Dokumentácia Rozmery: DxŠxV: 1,8 × 0,8 × 1,6 m / Hmotnosť: 750 kg Možnosť chýb alebo preklepov vyhradená.

Stav: dobrý (použitý), Leit & Zugspindel sústruh WEILER CONDOR - Originálny lak - Výška hrotu 165 mm - Priemer sústruženia nad lôžkom 330 mm - Priemer sústruženia nad suportom 170 mm Giedpjx A D Ubjfx Aamop - Vzdialenosť medzi hrotmi 800 mm - Otáčky vretena 24 - 2800 ot./min - Automatické pozdĺžne / priečne posuvy - Priechodnosť vretena 38 mm - Koník MK 3 - Príslušenstvo na upínacie púzdra + 17x upínacích púzdier - Trojčeľusťové skľučovadlo - Multifix s vložkami - Elektrická ochrana skľučovadla - Zadná ochrana proti trieskam - Pracovné osvetlenie - Rôzne príslušenstvo - Dokumentácia Rozmery: DxŠxV 1,8x0,9x1,6 metra / Hmotnosť 800 kg Vyhradzujeme si právo na chyby a preklepy

Stav: použitý, Rok výroby: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: WEILER LZS - Universal Lathe with Digital Readout Model PRIMUS VC Year of manufacture 1999 Center height 140 mm Max. turning Ø over cross slide 150 mm Max. swing Ø over bed 280 mm Center distance 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 face feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Gijdsvm Dv Djpfx Aamsp Total power consumption 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special features • SIEMENS 3-axis digital display with X-axis, Z-axis, and summing Z-axis on the compound rest • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, Ø 140 mm, mounted • Machine base cabinet for tool storage with integrated control cabinet and coolant system • Operating manuals Condition : Very good – ready for demonstration Ideal for training workshops Delivery : ex stock, as inspected Payment : strictly net upon collection – after receipt of invoice We kindly request your order. Further lathes of all sizes available in stock – please inquire.

Stav: takmer ako nový (použitý), Rok výroby: 2019, Funkcionalita: plne funkčný, Weiler Praktikant VCD Precision Lead and Feed Screw Lathe with 3-Axis Position Display – Infinitely Variable Speed – As New Condition, Year of Manufacture 2019 Technical Data: >> Year of Manufacture: 2019, Machine No. OD08 >> Centre Height: 160 mm >> Swing over Bed: 320 mm >> Swing over Cross Slide: 190 mm >> Distance Between Centres: 650 mm >> Spindle Speeds: 30 to 4000 rpm (infinitely variable) >> Spindle Bore: 43 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock: Morse Taper 3 >> Number of Feeds: 24 >> Longitudinal Feeds: 0.02 to 0.63 mm/rev >> Cross Feeds: 0.006 to 0.2 mm/rev Gsdpfxjw Swkvs Aamsip >> Threading Capabilities: Metric, Inch, Module, and Diametral Pitch Threads >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: approx. 1150 kg >> Spindle Brake >> Dimensions: approx. 1.72 m length, 1.7 m height, 0.89 m depth Accessories and Equipment: >> Weiler position display >> Collet chuck system, BRAND NEW collets for 3 to 26 mm >> 160 mm three-jaw chuck with one set of jaws >> Multifx size B toolpost with 3 tool holders >> 1x bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged VCplus Position Display: >> 8-inch color screen >> 3 axes for bed, cross slide, and compound slide >> 99 tool memory >> Oriented spindle stop >> Entry of constant spindle speed or cutting speed >> Feed and thread settings displayed >> Electronic stop for threading About the Machine: For sale is a Weiler Praktikant VCD precision lead and feed screw lathe with a 3-axis position display. Year 2019, in as new condition, original paintwork. The machine is fully operational, equipped with new collets and chuck. Take the opportunity to inspect this machine on-site under power and see its condition for yourself.

Stav: použitý, Rok výroby: 1986, Priemer sústruženia nad lôžkom: 320 mm Priemer sústruženia nad suportom: 198 mm Dĺžka sústruženia: 650 mm Gjdpfx Aasufud Demeip Celkový príkon: 2,2 kW Hmotnosť stroja cca: 650 kg Potrebný priestor cca: 1700 x 1000 x 1700 mm Digitálne odmeriavanie: 3-osové digitálne odmeriavanie Priemer priechodzieho otvoru tyče: Ø 40 mm Rozsah otáčok: 96 – 2500 ot./min Vretenová hlava: A 2 – 5 Rozsah posuvov: 0,007 – 0,63 mm/ot. Vhodné na výrobu závitov: metrické 0,25 – 8 mm, palcové 80 – 2 záv./", diametrálny závit 200 – 5 Dp, modul 0,2 – 4 Koník: MK 3 Trojčeľusťové skľučovadlo: 160 mm Rýchloupínací držiak nástrojov Multifix: typ B

Stav: použitý, Rok výroby: 1970, Weiler sústruh s koníkom Gjdpfehtnu Tjx Aamsip

Stav: dobrý (použitý), Rok výroby: 1972, Priemer sústruženia nad lôžkom: 330 mm Priemer sústruženia nad suportom: 200 mm Dĺžka sústruženia: 800 mm Celkový príkon: 3 kW Hmotnosť stroja: cca 800 kg Gisdpfx Aaowwl Izemsp Potrebný priestor: cca 1,9x0,7x1,2 m Rozsah otáčok: 24-2800 ot/min Príslušenstvo: *2 skľučovadlá s náhradnými čeľusťami *5 držiakov systému Multifix *Sada výmenných ozubených kolies *rôzne koníky a príslušenstvo

Stav: použitý, Rok výroby: 1989, Swing diameter over bed: 300 mm Swing diameter over cross slide: 150 mm Turning length: 800 mm Spindle bore: 36 mm Speed range: 42 - 2000 rpm Feeds: 0.011 - 0.91 mm/rev Tailstock quill taper: MT 3 Total power requirement: 2.2 kW Machine weight approx. 0.75 t Space requirement approx. 1.7 x 0.8 x 2.0 m Godperdwfzefx Aamjip The machine was previously in use at a vocational training center and has seen very little use!

Stav: použitý, Rok výroby: 1993, Funkcionalita: plne funkčný, Weiler / Contec (licenčná výroba) Matador sústruh, rok výroby 1993, s 3-osovým digitálnym odpočtom Elesta, štvorčeľusťovým skľučovadlom, rýchloupínacím systémom Multifix, zadným krytom proti striekaniu, elektrickou ochranou skľučovadla. Stroj je v dobrom a prevádzkyschopnom stave, po dohode je možné predviesť pod prúdom. Gjdpfx Aoxp Rvloamoip

Stav: použitý, Rok výroby: 1993, Funkcionalita: plne funkčný, Weiler / Contec (licenčná výroba) Matador sústruh, rok výroby 1993, s 3-osovým digitálnym odpočtom Elesta, štvorčeľusťovým skľučovadlom, rýchloupínacím systémom Multifix, zadným krytom proti striekaniu, elektrickou ochranou skľučovadla. Stroj je v dobrom a prevádzkyschopnom stave, po dohode je možné predviesť pod prúdom. Gijdpfx Ajxp Ru Ueamep

Stav: použitý, Rok výroby: 1985, Weiler Praktikant 140 sústruh, rok výroby 1985, trojčeľusťové skľučovadlo, systém rýchloupínača Multifix. Vedenie osi Z je v prednej časti mierne zodraté. Stroj je v dobrom a okamžite použiteľnom stave. Po dohode je možné predviesť stroj pod napätím. Gijdpfjv N Awfjx Aamsp

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm Gisdpexw H Dbjfx Aamjp - Rozsah otáčok: 40-3000 ot./min - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou - Štvorklauzové skľučovadlo - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená.

Stav: použitý, Swing diameter over bed: 250 mm Swing diameter over cross slide: . mm Distance between centres: approx. 400 mm Gijdpfx Aaowa Dz Ejmjp Centre height: approx. 125 mm Speed range: 80 - 3000 rpm Number of speed steps: 18 Spindle bore: 24 mm Tailstock quill taper: MT 3 Weight: approx. 400 kg Dimensions (L x W x H): approx. 1200 x 650 x 1300 mm Four-jaw chuck diameter: 125 mm Including Röhm four-jaw chuck, Ø 125 mm, with drill and turning jaws; Collet chuck system incl. collets 1-20 mm, 1 mm increments; Multifix size A with 3 tool holders; Chuck guard with shut-off switch.

Stav: dobrý (použitý), WEILER LZ 330 / Zo vzdelávacieho zariadenia - Priemer sústruženia nad lôžkom: 330 mm - Priemer sústruženia nad suportom: 165 mm - Dĺžka sústruženia: 800 mm Giedpfx Aasxf Uf Njmep - Rozsah otáčok / prevodovka: 25-2800 ot./min - Automatické pozdĺžne a priečne posuvy - Priechod vretena: 38 mm - Trojčeľusťové skľučovadlo - Príslušenstvo na upínacie puzdrá vrátane 20 puzdier - Rýchloupínací držiak Multifix vrátane 3 vložiek - Kopírovacie zariadenie - Rôzne príslušenstvo - Dokumentácia Rozmery: D x Š x V 1,8 x 0,7 x 1,6 m / Hmotnosť 750 kg Vyhradzujeme si právo na chyby alebo preklepy

Stav: dobrý (použitý), WEILER CONDOR VS 2 z univerzity (skúšobné laboratórium) - Vedenia "ako nové" Giedpfx Ajxc H Tyoamep - Výška hrotu: 165 mm - Ubehový priemer nad lôžkom: 330 mm - Vzdialenosť medzi hrotmi: 800 mm - Rozsah otáčok: 28-2800 ot./min - Automatické pozdĺžne/čelné posuvy - Priechod vretena: 40 mm - Závity / metrické / palcové atď. - Upínacie klieštiny – rýchloupínacie zariadenie vrátane klieštin - Štvorčeľusťové skľučovadlo Röhm - Čelná doska - Štvorčeľusťová čelná doska - Ochrana skľučovadla - Multifix s vložkami - Núdzové zastavenie - Dokumentácia Rozmery: D x Š x V 2 x 0,8 x 1,6 metra / Hmotnosť 900 kg Zmena údajov a chýb vyhradená

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Weiler Condor 81 Lathe with Heidenhain Digital Readout, Year 1992, in excellent original condition The machine originates from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2003 Engine and toolroom lathe WEILER Type Condor 81 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: Short taper DIN 55027, size 5 Tailstock quill taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 V, 50 Hz Spindle speed via 16-step gearbox Dimensions (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Accessories and Equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant system Heidenhain digital readout About the machine: Gisdpfx Asw T U Sgoamjp We are offering a Weiler Condor 81 lathe with Heidenhain digital readout, year of manufacture 1992, in excellent condition. Of course, the machine is fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler operates very quietly. This newer generation of lathes is extremely user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. Further lathes from renowned manufacturers can be found on our website.

Stav: pripravené na použitie (použité), Rok výroby: 2006, Funkcionalita: plne funkčný, číslo stroja/vozidla: 864, výška stredu: 140 mm, šírka v strede: 500 mm, Stroj pochádza z konkurzu automobilového subdodávateľa – stroje sú aktuálne stále v prevádzke! TECHNICKÉ ÚDAJE Digitálny displej: áno Ovládanie: Siemens Sicomp IMC 05 Výška hrotu: 140 mm Vzdialenosť medzi hrotmi: 500 mm Upínací systém Trojčeľusťové skľučovadlo: áno Rýchloupínač: áno Koník Typ: existuje Ďalšie informácie podľa výrobcu – bez záruky Vzdialenosť medzi hrotmi: 500 mm Výška hrotu: 140 mm Priemer obrobku nad lôžkom: 280 mm Priemer obrobku nad suportom: 150 mm Hlavné vreteno Vretenová hlava podľa DIN ISO 702-3: veľkosť 5 Priemer vretena vo vnútornom ložisku: 70 mm Priemer vretenového otvoru: 43 mm Vnútorná kužeľová hĺbka hlavného vretena: 50 mm Hlavný pohon Výkon pohonu (100 % pracovného zaťaženia): 4 kW Rozsah otáčok: 30 – 4 000 ot./min Počet stupňov: 1 Počet rozsahov otáčok: plynulý Podávací pohon Počet posuvov: 24 Rozsah posuvov pozdĺžne/priečne: 0,02 – 0,63 mm/ot / 0,006 – 0,2 mm/ot Oblasť rezania závitov Metrické závity: 0,25 – 8 mm Giedpfx Aev N Inieamsp Palcové závity: 80 – 2 TPI Koník Priemer pinoly: 40 mm Vysunutie pinoly: 85 mm Upínanie kužeľa pinoly: MT 3 Rozmery stroja Dĺžka x šírka x výška: 1.570 x 890 x 1.700 mm Hmotnosť: 1.050 kg