Weiler Lz 300 kúpiť použité (173)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch Hodpfju Aftgex Agtong >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Priemer sústruženia nad lôžkom 330 mm Vzdialenosť medzi hrotmi 750 mm Otáčky vretena 1–4 500 ot/min Ovládanie: WEILER C3 Hnsdpfx Aeud Naqjgteg Rôzne príslušenstvo MARCELS MASCHINEN CH

Stav: veľmi dobrý (použitý), Top stav, pravidelne servisované (faktúry k dispozícii), veľa príslušenstva! Hnsdpfx Agexw D S Astjg

Stav: dobrý (použitý), Rok výroby: 2000, Funkcionalita: plne funkčný, sústružnícky priemer nad priečnym suportom: 180 mm, otvor vretena: 40 mm, sústružnícky priemer: 330 mm, sústružnícky priemer nad lôžkom suportu: 330 mm, výška stredu: 165 mm, dĺžka sústruženia: 750 mm, ťah perom: 110 mm, otáčky (max.): 2 800 ot./min, otáčky (min.): 22 ot./min, výkon: 5,5 kW (7,48 k), Výbava: otáčky plynule nastaviteľné, Weiler Condor AC plynulo nastaviteľný sústruh Hsdpferuqzcsx Agtsng

Stav: použitý, Rok výroby: 1979, Funkcionalita: plne funkčný, Vodiaca a ťažná vretenová sústruh Výrobca: WEILER Typ: COMMODOR Hedpfx Aoxt Ngqsgtong Rok výroby: 1979 Technické údaje Značka: Weiler Typ: Commodor Vzdialenosť medzi hrotmi: 1000 mm Priemer otáčania nad lôžkom: 400 mm Priemer vretena: 50 mm Rozsah otáčok: 63-2000 ot./min Výkon pohonu: 4 kW Rozmery: cca D 2,2 x Š 1,0 x V 1,7 m Hmotnosť: cca 1,5 t Vybavenie • 3-osový digitálny ukazovateľ • Vŕtacie skľučovadlo • 3-čeľusťové skľučovadlo značky Röhm D 200 mm • Multifix držiak • Dodatočné 3-čeľusťové skľučovadlo, ktoré je na stroji, nepatrí k dodávke! Všetky informácie sú bez záruky. Predvedenie pod prúdom je kedykoľvek možné v našej výstavnej hale.

Stav: dobrý (použitý), WEILER Praktikant 800 R / Hriadeľová a posuvová sústruh z výučbového zariadenia - Priemer sústruženia nad lôžkom 300mm Hjdpfx Agsxyqxnjtong - Priemer sústruženia nad suportom 150mm - Dĺžka sústruženia 800mm - Priechod vretien 42mm - Rozsah otáčok 40-2000 ot./min - Automatické pozdĺžne a čelné posuvy - Závity / metrické / palcové / - Koník MK 3 - Výkon pohonu 3kW - Multifix s vložkami - Rýchloupínacie zariadenie na upínacie klieštiny vrátane klieštin - Ochrana skľučovadla - Zadná stena na triesky s pracovným svetlom - Núdzové zastavenie - Výmenné ozubené kolesá - Otočný hrot + skľučovadlo - Skrinka na náradie - Dokumentácia Rozmery: DxŠxV 1,8x0,8x1,6 metra / hmotnosť 750 kg Chyby a preklepy vyhradené

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm Hnsdjvtp Edopfx Agtog >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: dobrý (použitý), Weiler E70 CNC sústruh s priebežným vretenom Rok výroby: 2003 Vzdialenosť medzi hrotmi: 2000 mm Priemer otvoru vretena: 8" (200 mm) Stroj vybavený: - Predné a zadné skľučovadlo - Koník Hsdpfx Agowmqkyjtjng - Pevná luneta

Rok výroby: 1973, Stav: veľmi dobrý (použitý), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R Precision Mechanic Lathe Type MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning diameter over cross slide 140 mm Max. swing diameter over bed 260 mm Centre distance 500 mm Spindle bore 28 mm Range 1 – Spindle speeds: 220-1,800 rpm Range 2 – Spindle speeds: 110-3600 rpm Spindle drive kW Total drive kW - V - Hz Weight 500 kg Accessories / Special Equipment • Equipped with a 3-jaw chuck from RÖHM 110 mm diameter, mounted Hedpfx Aexpxqwjgtong • Machine base with integrated tool storage and comprehensive accessory package, consisting of collet sets Condition : very good – demonstration ready, ideal for training workshops, maintenance, etc. Please click here for a video of the machine: MDU260/4 Delivery : ex stock - as inspected Payment : strictly net upon collection - after receipt of invoice

Rok výroby: 1977, Stav: použitý, Weiler Matador lathe, year of manufacture approx. 1977, with three-jaw chuck and Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Hjdsnkad Sspfx Agteng

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Mlynček Provisur Weiler 878, model s výkonom 50 hp. Skvelý stroj pre výrobcov hamburgerov, klobás a krmív pre domáce zvieratá. Môže mlieť čerstvé alebo mrazené mäso v plátkoch. Predĺžený zásobník. Hnsdjx Av Rujpfx Agtog

Stav: veľmi dobrý (použitý), WEILER PRIMUS Typ MD-G - Výška hrotu: 125 mm - Vzdialenosť medzi hrotmi: 400 mm - Rozsah otáčok: 40-3000 ot./min Hsdpfx Asxw H Dbsgteng - Priechod vretena: 24 mm - Elektrická ochrana skľučovadla - Multifix s vložkami - Koník s vŕtacou pinolou - Štvorklauzové skľučovadlo - Pracovné osvetlenie - Doraz na loži - Dokumentácia Rozmery: D x Š x V: 1,3 x 0,8 x 1,6 m / Hmotnosť: 450 kg Možnosť chýb alebo preklepov je vyhradená.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus GS lead and feed screw lathe with 3-axis digital readout Easson ES8 from a training workshop, excellent condition! Technical data: - Year of manufacture: approx. 1990, machine no. 3768 - Centre height: 120 mm - Centre distance: 430 mm - Spindle speed: 60 - 3000 rpm in 18 geared steps - Spindle bore: 23 mm - Short taper spindle nose DIN 4 - Tailstock: Morse taper 2 (MT2) - Feeds: from 0.03 to 0.15 mm/rev Hsdpfx Agsvkfhpjteng - Thread cutting: Metric, inch, module, and diametral pitch threads possible - Metric thread pitches: 0.25 to 2.5 mm - Weight: approx. 360 kg - Dimensions: 1.2 m (L) x 1.3 m (H) x 0.65 m (D) Equipment and accessories: - 3-axis digital readout by Easson ES8 - Collet clamping system from 1 to 20 mm, collets in 1 mm increments with mounting and drawtube - 1 three-jaw chuck with two sets of jaws - 1 four-jaw chuck with two sets of jaws - Multifix quick-change toolpost size A with 3 tool holders - Bed stop - Taper turning attachment About the machine: For sale is a Weiler Primus lead and feed screw lathe, year of manufacture approx. 1990, in outstanding condition. Naturally, the machine is fully functional. All slides move very smoothly and evenly. The bed guides are in very good condition. The Weiler runs quietly even at high speeds. The lathe comes from the training workshop of a large company. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Stav: veľmi dobrý (použitý), otvor vretena: 38 mm, sústružnícky priemer nad lôžkom suportu: 340 mm, priemer sústruženia nad horným suportom: 200 mm, dĺžka sústruženia: 750 mm, celková dĺžka: 1 700 mm, celková šírka: 650 mm, celková výška: 1 500 mm, maximálna rýchlosť vretena: 2 800 ot./min, otáčky vretena (min.): 12 ot./min, celková hmotnosť: 800 kg, Vybavenie: – koník Hnedpfxewxq Ico Agtsg – držiak sústružníckych nožov Multifix – trojčeľusťové skľučovadlo RÖHM (Ø 160 mm)

Stav: použitý, Priemer sústruženia nad lôžkom: 370 mm Priemer sústruženia nad suportom: 200 mm Dĺžka sústruženia: 1000 mm Výška hrotov: 185 mm Priechod vretena: 56 mm Upnutie pinoly koníka: MK 4 Otáčky: 50 - 2000 ot/min Príkon pohonu: 4,0 kW Hmotnosť stroja: cca 1,4 t Priestorové nároky: cca 2,3 x 1,1 x 1,3 m Sústruh s vodicou a ťahovou skrutkou Trojčeľusťové skľučovadlo 200 mm Držiak nožov Multifix veľ. B 3 ks Multifix kazety Zariadenie núdzového zastavenia Hjdpfoxfwcksx Agtong

Stav: pripravené na použitie (použité), Dĺžka sústruženia: 500 mm Priemer sústruženia nad lôžkom: 297 mm Priemer sústruženia nad suportom: 160 mm Vretenový otvor: 36,0 mm Upínanie: DIN 55022 Gr. 5 Hjdpfx Agoxq Hhysteng Pinola: 3 MK Zdvih pinoly: 90,0 mm Otáčky: 30 - 3550 ot./min Otáčky motora: 1410 / 2830 ot./min Celkový príkon: 3,3 kW Napätie: 380 V Hmotnosť stroja: cca 620 kg Rozmery (D-Š-V): 1420 x 700 x 1200 mm Zo strednej odbornej školy – vo veľmi dobrom stave (!!) Obzvlášť vhodný na stredne presné sústružené dielce Výbava: - robustný sústruh s vodiacim a ťahačkovým vretenom - RÖHM trojčeľusťové skľučovadlo Ø 160 mm - vyklápací kryt skľučovadla - kľúč na skľučovadlo - MULTIFIX držiak nožov typ A, s 3 novými vložkami - posuvná koníková pinola - otočná strojová lampa - ovládací panel vpredu vľavo - automatické posuvy pre pozdĺžny a priečny suport - stojan stroja so skrinkovými dverami (odkladací priestor) - zadný ochranný kryt proti trieskam - 1 prázdny nástrojový kabinet - núdzové vypínač - návod na obsluhu

Stav: ako nová (výstavný stroj), WEILER COMMODOR 180 GSD / Nový stroj - výstavný kus - nepoužitý IHNEĎ K DODANIU ZO SKLADU - Výstavný stroj / NOVÝ-nepoužitý - CE označenie - 3-osý digitálny displej - Výška hrotu 180 mm - Obežný priemer nad lôžkom 380 mm Hedpfjxviiqex Agtjng - Obežný priemer nad suportom 215 mm - Vzdialenosť medzi hrotmi 1000 mm - Priechod vretenom 56 mm - Otáčky / prevodovka 25 - 2000 ot/min - Automatický pozdĺžny / priečny posuv - Závity / metrické / palcové / diametrálne - Koník / kužeľ pinoly MK 4 - Výsuv pinoly 150 mm - Chladiace zariadenie - Multifix s vložkou - Sklučovadlo s tromi čeľusťami 200 mm - Pracovné osvetlenie - Zadná stena proti trieskam - Dokumentácia Rozmery: D x Š x V 2,6 x 1,6 x 1,7 metra / hmotnosť 2000 kg Zmeny a chyby vo vyhotovení vyhradené.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Hnodpfxsvivmys Agteg Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: dobrý (použitý), otvor vretena: 28 mm, sústružnícky priemer nad lôžkom suportu: 300 mm, priemer sústruženia nad horným suportom: 200 mm, dĺžka sústruženia: 500 mm, celková dĺžka: 1 400 mm, celková šírka: 700 mm, celková výška: 1 600 mm, celková hmotnosť: 800 kg, Vybavenie: – Multifix držiak sústružníckeho noža – Štvorčeľusťové skľučovadlo (Ø 130 mm) Hjdpfx Agewxq Iijtsng – Digitálny odmeriavací systém značky HEIDENHAIN

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, Weiler center lathe model Condor B, lead and feed screw lathe with new K&C 3-axis digital readout, CE compliant! Technical data: - Machine No.: 2442, Year of manufacture: 1997 - Center height: 165 mm - Center distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Camlock spindle nose DIN 55027, size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread types: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Electrically engageable spindle brake - Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Hjdpfx Ajxcuazjgtong Equipment & accessories: - New K&C 3-axis digital readout with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tooling program for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal - 1 piece NEW 160 mm 3-jaw chuck with 2 sets of jaws - 1 piece 200 mm 4-jaw chuck with 1 set of jaws - NEW collet chuck and NEW collet set from 3 to 25 mm in 1 mm increments - Multifix size B with 2 tool holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Safety equipment: electronic spindle guard, 2 emergency stop buttons, change gear box with end switch, spindle brake About the machine: For sale is a Weiler Condor in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our location.

Stav: dobrý (použitý), Funkcionalita: neoverené, číslo stroja/vozidla: 10279, sústružnícky priemer nad priečnym suportom: 200 mm, otvor vretena: 35 mm, sústružnícky priemer: 300 mm, výška stredu: 150 mm, dĺžka sústruženia: 750 mm, celková dĺžka: 1 860 mm, celková šírka: 700 mm, celková výška: 1 800 mm, maximálna rýchlosť vretena: 2 800 ot./min, otáčky vretena (min.): 40 ot./min, celková hmotnosť: 1 030 kg, - Prevádzkové napätie: 380 V - Pripojovací výkon: 3 kW - Menovitý prúd: 25 A - Frekvencia: 50 Hz Hnodpfx Agev Irgtjtsg Vybavenie: - Koník - Multifix typ B držiak nástrojov - Trojčeľusťové skľučovadlo (priemer: 160 mm) - 2-osový digitálny odpočet výrobcu RSF

Stav: veľmi dobrý (použitý), Rok výroby: 2003, Funkcionalita: plne funkčný, Weiler Primus VC precision centre lathe with 3-axis digital readout K&C, NEW with VC variable-speed drive and CE, in very good condition. Technical Data: >> Year of manufacture: 2003, Machine no. 646 >> Centre height: 140 mm >> Centre distance: 500 mm >> Spindle speeds: up to 4,000 rpm, infinitely variable >> Spindle bore: 40 mm Hsdpfxow Idlls Agtsng >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread cutting: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake, switchable >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and Equipment: >> 3-axis digital readout K&C NEW >> Collet system with collets from 3 to 26 mm, new, 1 mm increments NEW >> 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 2 tool holders >> Electrical chip guard >> Machine feet >> Splash guard About the machine: For sale is a Weiler Primus VC screwcutting and feeds lathe, year 2003, in very good original condition. A very fine centre lathe with a VC drive, stepless speed control of the work spindle. The K&C digital readout and scales are new. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be finished close to a ground quality. The K&C DRO makes operation even easier and more precise. You are welcome to inspect and test the machine under power on site, so you can see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders Hodpfxswrmuxe Agtjng >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake Hjdpfx Aew Nw Dqogtjng About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor 81 - Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Technical Data: >> Year of manufacture: 1983 Machine No. 83-067 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2,800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches: 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Spindle brake, switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and Equipment: >> NEW 3-axis digital readout from K&C, 12-month manufacturer warranty with instruction manual Functions: mm/inch switching, ABS/INC coordinate selection, value halving, reference point, 200-tool programming, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> New collet chuck and new collets from 3 to 26 mm, increment 1 mm >> Multifix size B with 3 tool holders Hnodpfx Ajwb Supogtsg >> Electronic spindle protection >> Rear splash guard >> Coolant system >> Machine feet About the Machine: Offered here is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new 3-axis digital readout from K&C makes operation easier and more precise. The machine has been electrically and mechanically tested by us, and a complete oil change has been performed. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test the machine under power on site.