Weiler Lz 330 kúpiť použité (206)

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Equipment and Accessories: Dcodpsvtp Edjfx Aavok >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments Dcodpfx Asu Aftgoavjk >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: takmer ako nový (použitý), Funkcionalita: plne funkčný, Weiler Praktikant 160B Precision Centre Lathe, 3-Axis K&C Digital Readout NEW. Refurbished with certification protocol for new-machine tolerances. Technical Data: Djdpfxsvrdlco Aaveck >> Machine No.: 87 160 760 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2,500 rpm >> Spindle bore: 40 mm >> Short-taper spindle nose, DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake engageable >> Length: 1.6 m, Height: 1.25 m, Depth: 0.7 m Accessories & Equipment: >> 3-axis digital readout system from K&C, new, with 12-month manufacturer warranty and user manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching >> New collet chuck, NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> New LED machine lamp >> New machine feet >> Splash guard >> Operating manual, spare parts diagram (PDF) About the machine: Offered for sale is a Weiler Praktikant 160 B engine and leadscrew lathe in toolroom precision, fully overhauled geometrically. Refurbished with acceptance protocol for new-machine tolerances. For safety: Electronic work spindle protection, covers for leadscrew and feed shaft, 2 emergency stop buttons, and a braked motor. This newer generation of Weiler lathes is very user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power at our premises and see the condition for yourself.

Stav: dielensky repasované (použité), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 160 mm, šírka v strede: 650 mm, ťah perom: 85 mm, celková dĺžka: 1 600 mm, celková šírka: 900 mm, celková výška: 1 500 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has undergone extensive partial refurbishment in our workshop and is therefore in excellent technical and optical condition. All guideways are in good order, the gearboxes run smoothly and quietly, and the control levers can be operated effortlessly. You are welcome to inspect the machine’s condition at our facility in person. Availability: on request Dcedpfju H U S Hex Aavek Centre height: 160mm Centre distance: 650mm Spindle bore: Ø 40mm Tailstock taper: MT3 Quill travel: 85mm Longitudinal feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: selectable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5m (LxHxW) Weight: approx. 720kg Additional equipment and accessories: 3-axis digital readout, coolant system, chuck guard, 3-jaw chuck, and additional accessories available on request… Our service promise to you: - We are a certified master craftsman business in the field of mechanical engineering - All machines are thoroughly inspected - All lubricants and, where necessary, worn parts are replaced in advance - On request, we can completely or partially overhaul the machine of your choice - On request, we can repaint the machine in your desired colour - On request, you can order additional accessories such as tooling directly - On request, we can install additional accessories such as safety devices - We will gladly take care of shipping and/or installation

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, otvor vretena: 40 mm, výška stredu: 165 mm, šírka v strede: 750 mm, Dear Sir or Madam, We are offering for sale a Weiler Condor B lathe. This model is particularly notable for its user-friendly operation and its excellent ratio of footprint to center height/center distance. The Condor B sits in terms of size between the Weiler Praktikant and Weiler Commodor, making it a true all-rounder for any workshop. The machine has been extensively partially overhauled in our workshop, ensuring it is in outstanding technical and visual condition. All guideways are in good order, the gearboxes run quietly, and the levers can be shifted smoothly. You are welcome to inspect the machine on site. Availability: On request Center height: 165mm Center distance: 750mm Spindle bore: Ø 40mm Tailstock taper: MK3 Chuck mount: Short taper DIN55027 size 5 with bayonet lock Quill travel: 85mm Speed range: 22–2800 rpm Thread types: Metric, Imperial, Module, Diametral Pitch Metric thread pitches: 0.18–28mm Spindle brake: Switchable Voltage: 400V Dimensions: approx. 1.80x1.30x0.9m (LxHxW) Weight: approx. 1100kg Additional features and accessories: 3-axis digital readout K+C (NEW), chuck guard (NEW), coolant system, 2x emergency stop buttons, leadscrew and feed rod cover (optional), operating manual, and more upon request... Our Service Promise to You: - We are a certified master craftsman business in mechanical engineering - All machines are at least workshop-tested - All lubricants and any worn parts are replaced beforehand - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your preferred color - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices Dodpjw N Np Sefx Aaveck - We are happy to arrange shipping and/or installation for you

Stav: dielensky repasované (použité), Rok výroby: 2001, Funkcionalita: plne funkčný, číslo stroja/vozidla: 3595, Dear Ladies and Gentlemen, Dsdpfsthd Shsx Aavock For sale is a Weiler Commodor B lathe, year of manufacture 2001, equipped with a Heidenhain 3-axis digital display. The machine has undergone extensive partial overhauling in our workshop. Among other things, the main spindle bearing as well as the feed/lead screw bearing have been completely renewed! Technically, geometrically, and visually, the machine is in excellent condition, which you are welcome to verify on-site. Availability: on request Machine no.: 3595 Year of manufacture: 2001 Centre height: 180 mm Centre distance: 1000 mm Spindle bore: Ø 56 mm Max. spindle speed: 2000 rpm Tailstock taper: MT4 Feed range: 0.026 – 0.888 mm/rev Possible thread types: metric, imperial, module, diametral pitch Metric thread pitches: 0.35 – 12 mm Spindle brake: switchable Connected load: 4 kW Dimensions: approx. 2.2 x 1.5 x 1 m (L x H x W) Weight: approx. 1.8 t Further equipment and accessories: 3-axis digital display, coolant system, chuck guard, pull-out chip tray, Röhm 3-jaw chuck, Röhm 4-jaw chuck, various clamping jaws, etc. Our service promise to you: - We are a certified master enterprise in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul the selected machine - On request, we can repaint the selected machine in your desired color - On request, you can order additional accessories such as tools directly - On request, we can install further accessories such as safety devices - We are happy to assist with shipping and/or installation

Stav: použitý, Rok výroby: 1995, Swing diameter: 720 mm Turning length: 3,000 mm Control: Siemens 805 Swing diameter over support: 430 mm Spindle speed: 1,800 rpm Tailstock quill taper: MT 6 Steadies: 3 pieces Main drive motor: 36 kW Z-axis travel: 3,050 mm X-axis travel: 410 mm Swing diameter over cross slide: 430 mm Dcodpfx Aoyqvbdoavsk Spindle drive: 28 kW Workpiece weight: 3,000 kg Spindle bore: 106 mm Three-jaw chuck diameter: 305 mm Total power requirement: . kW Machine weight approx.: 6 t Space requirement approx.: 4 x 2.4 x 2 m Steady rest 1: diameter: 120-300 mm Steady rest 2: diameter: 220-400 mm Steady rest 3: diameter: 350-500 mm Chuck: Diameter: 315 mm The technical data are based on manufacturer or operator information and are therefore non-binding for us. Prior sale reserved; our terms and conditions of sale and business apply exclusively. About us More than 400 machines in our own stock Over 15,000 m² warehouse area, crane capacity 70 t More than 10,000 accessory items for your workshop If you would like to sell machines, production lines or your business, please contact us. You can find further offers on our website. Viewing by appointment possible. We look forward to your visit. Your Markus Hirsch Team

Stav: pripravené na použitie (použité), Rok výroby: 2002, Funkcionalita: plne funkčný, otvor vretena: 83 mm, sústružnícky priemer: 570 mm, priemer otáčania nad priečnym suportom: 340 mm, výška stredu: 280 mm, maximálna rýchlosť vretena: 2 500 ot./min, Stroj je vďaka masívnej konštrukcii vhodný na ťažké sústružnícke a sériové práce! TECHNICKÉ ÚDAJE Otáčkový rozsah: 1 – 2 500 ot./min Krútiaci moment: 1 300 – 1 600 Nm Priechodný priemer nad ložom: 570 mm Priechodný priemer nad supportom: 340 mm Výška hrotu: 280 mm Vzdialenosť medzi hrotmi: 2 000 mm Priemer vretenovej diery: 83 mm (voliteľne 128 / 165 mm) Počet pozícií v revolveri na nástroje: 8 Uchytenie revolvera: VDI 40 Priemer pinoly koníka: 80 mm Kužeľ vo vnútri koníka: MK5 Dedpfx Asymx N Neaveck DETAILY STROJA Riadiaci model: WEILER SIEMENS 810D Hlavný motor: 20 / 17 kW (60% / 100% ED) Rozmery & Hmotnosť Rozmery (D x Š x V): 3 850 mm × 1 850 mm × 1 750 mm Hmotnosť stroja: 4 200 kg

Stav: pripravené na použitie (použité), Rok výroby: 1990, prevádzkové hodiny: 51 392 h, celková výška: 1 700 mm, celková hmotnosť: 1 300 kg, This Weiler E30 was manufactured in 1990. A robust centre lathe featuring a spindle bore of 42 mm and a swing over bed of 330 mm. It supports a wide range of thread cutting—from metric to DP threads—and includes a Multifix toolholder size B. Ideal for precise and versatile turning work. Contact us for further details on this machine. Additional equipment • Multifix toolholder B mounted • Fixed steady rest (optional) clamping range: 15–100 mm • Travelling steady (optional) clamping range: 10–85 mm • Collet set from 3 mm (in 0.5 mm increments) • Tailstock with an MT3 quill Machine Advantages Technical Machine Advantages • Drive power 100% / 60% duty cycle: 9 / 11 kW • Max. spindle torque: 180 Nm • Total speed range: 1–4500 rpm • Feed drive: three-phase AC feed drives • Longitudinal feed range: 0–20 mm/rev • Rapid traverse longitudinal/cross: 10 / 7.5 / 5 / 3.5 m/min • Tailstock quill diameter: 50 mm • Tailstock quill travel: 110 mm • Tailstock taper: MT3 Additional Information Swing over cross slide: 160 mm Dodsyaimfspfx Aavjck Bed width: 240 mm Cross slide travel: 180 mm Bed saddle guideway length: 395 mm Tool section (height/width): 20 x 20 mm Spindle nose to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Headstock spindle taper: MT5 Workpiece threading: Metric thread range: 0.1–400 mm Inch thread range: G/1" 1/4–56 Module thread range: mm DP thread range: 1–224 G/" Max. number of threads: 50 Dimensions Machine depth: 1800 mm

Rok výroby: 1977, stav: použitý, Weiler Matador lathe, year of manufacture approx. 1977, with three-jaw chuck and Multifix quick-change toolpost. The machine is in operational condition and can be demonstrated under power by prior arrangement. Dcodpfonkad Sjx Aavok

Stav: použitý, Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Matador VS2 sústruh, rok výroby 1992, trojčeľusťové skľučovadlo, Multifix rýchloupínací systém, zadný ochranný kryt proti striekaniu, elektrická ochrana skľučovadla. Stroj je v dobrom, prevádzkyschopnom stave, možné predviesť pod prúdom po dohode. Dsdpfx Aasx Sqvgsvock

Stav: ako nová (výstavný stroj), WEILER COMMODOR 180 GSD / Nový stroj - výstavný stroj - K dispozícii zo skladu - Výstavný stroj / NOVÝ - NEPOUŽITÝ Dcsdpoy Dc Tzefx Aavjk - 3-osý digitálny ukazovateľ - CE označenie - Výška hrotu 180 mm - Obežný priemer nad lôžkom 380 mm - Obežný priemer nad suportom 215 mm - Vzdialenosť medzi hrotmi 1000 mm - Priemer priechodného otvoru 56 mm - Otáčky / prevodovka 25 - 2000 ot./min - Automatické pozdĺžne / priečne posuvy - Závity palcové / metrické atď. - Ochrana skľučovadla - Koník / kužeľ pinoly MK 4 - Vysunutie pinoly 150 mm - Zariadenie na chladenie - Multifix s vložkou - Trojčeľusťové skľučovadlo 200 - Pracovné osvetlenie - Zadná stena na triesky - Dokumentácia Rozmery: dxšxv 2,6x1,6x1,7 metra / Hmotnosť 2000 kg Možné chyby a omyly v údajoch vyhradené.

Stav: pripravené na použitie (použité), Rok výroby: 1997, Leit- a ťahová hrotová sústruh / WEILER CONDOR B vrátane 3-osého digitálneho odmeriavania / Heidenhain - Stroj z vzdelávacej inštitúcie - Výška hrotu 165 mm - Obežný priemer nad lôžkom 330 mm - Obežný priemer nad suportom 185 mm - Dĺžka sústruženia cca 800 mm - Otáčky vretena 22 - 2800 ot./min. - Automatické pozdĺžne / priečne posuvy - Rezanie závitov / metrické atď. - Priechod vretenom 40 mm - Koník / kužeľ pinoly MK 3 - Elektrická ochrana skľučovadla Dsdpfxsy A Ey Uj Aavock - Multifix základný držiak s vložkami - Trojčeľusťové skľučovadlo - Forkardt - Strojové svetlo - Zadná stena na triesky - Zarážka lôžka - Nohy stroja - Dokumentácia Rozmery: D x Š x V 1,8 x 0,8 x 1,6 metra / Hmotnosť 1100 kg Chyby a preklepy vyhradené

Stav: dobrý (použitý), Rok výroby: 2008, Weiler DZ 40, Rok výroby 2008, Ovládanie Siemens 840 D, Dcedpfx Aoy Ev Iueavsk Pojazd X/Z 200/350 mm, Priemer sústruženia 180 mm, Max. obvodový priemer Ø 560 mm, Os Y +/- 25 mm, Os Q / programovateľný koník, Pojazd osi Q 360 mm, Merací systém osi Q rotačný, Koník MK 4, Hlavné vreteno max. priechod tyče 42 mm, Vretenový otvor 52 mm, Rýchloposuv X/Z/Q 30/30/20 m/min, Revolver 16-násobný – všetky stanice poháňané, VDI 25, Priemer stopky 25 mm, Poháňané nástroje do 4.500 ot/min, Miska na obrobky, Príslušenstvo, Držiak poháňaných nástrojov, Pevné držiaky,

Stav: pripravené na použitie (použité), otvor vretena: 56 mm, sústružnícky priemer: 360 mm, výška stredu: 180 mm, WEILER Commodor B vrátane 3-osého digitálneho odpočtu Heidenhain -GS identifikácia -3-osý digitálny odpočet / Heidenhain -Rok výroby 1991 -Výška hrotu 180 mm -Točný priemer nad ložom 330 mm -Vzdialenosť medzi hrotmi 1000 mm -Priechod vretena 56 mm -Otáčky vretena 25-2000 ot/min -Automatický pozdĺžny / čelný posuv -Rezanie závitov / metrický / palcový / modulový atď. -Základný Multifix držiak s vložkami -Ochrana skľučovadla -2x núdzové vypínače -Trojčeľusťové skľučovadlo -Zadná ochrana proti trieskam -Veľmi zachovalý stav -Stroje nohy -Dokumentácia Rozmery: DxŠxV 2,3x1,2x1,6 metra / Hmotnosť 1600 kg Chyby a omyly vyhradené Dcjdoy Ak S Ajpfx Aavsk

Stav: dobrý (použitý), Rok výroby: 2001, Weiler DA 210 Lathe Weiler DA 210 with Fagor digital readout, year of manufacture 2001, in very good original condition. The machine comes from the special production unit of a renowned German mechanical engineering company. CE compliant!! Technical data: WORKING AREA Centre height: 210 mm Swing diameter over bed: 435 mm Swing diameter over cross slide: 245 mm Dsdpfx Aey Auyqjavjck Distance between centers: 1,000 mm MAIN SPINDLE Spindle nose: DIN 55027 / DIN ISO 702-3 size 6 Spindle bore: 52 mm Spindle diameter in front bearing: 83 mm MAIN DRIVE Drive power 60%/100% duty cycle: – / 5.5 kW Speed range: 44 – 2,000 rpm Number of speeds: 12 FEED RANGE Number: 66 Longitudinal: 0.072 – 4 mm/rev Cross: 0.036 – 2 mm/rev THREAD CUTTING RANGE Metric threads: 0.5 – 28 mm TAILSTOCK Quill diameter: 65 mm Quill stroke: 120 mm Internal taper: DIN 228 MK 4 ACCEPTANCE ACCURACY DIN 8605 About the machine: TOP PRECISION, EASY OPERATION, AND SOPHISTICATED TECHNOLOGY These are the advantages of the conventional Weiler DA series. For sale is a Weiler DA 210 lathe with Fagor digital readout, year 2001. This lathe is in very good original condition. It comes from a facility where it was only rarely used for special construction purposes. The control is very easy to use. The guideways are regularly lubricated via central lubrication. The Weiler DA 210 was mechanically and electrically inspected by us. Take the opportunity to view and test the Weiler DA 210 under power on site. You can find further lathes from well-known manufacturers on our website.

Rok výroby: 2010, stav: takmer ako nový (použitý), Máme nasledujúce príslušenstvo pre sústruh Weiler E30. 1 ks upínacia platňa Schunk 250 mm Cena: 600 € Vretenová hlava DIN 55027, veľkosť 5 2 ks upínacia platňa Röhm 260 mm Cena za kus: 650 € Djdpfx Aajgabvnoveck Vretenová hlava DIN 55027, veľkosť 5 1 ks pojazdná luneta Cena: 450 € 2 ks pohonná príruba Cena za kus: 210 € Vretenová hlava DIN 55027, veľkosť 5 Všetky diely sú vo veľmi dobrom stave.

Stav: veľmi dobrý (použitý), Rok výroby: 2020, Prívesná luneta pre Weiler E 50, rok výroby 2020. Vo veľmi dobrom stave. Upínací rozsah: 12 - 125 mm. Dedpfjyfnwmox Aavock

Stav: dobrý (použitý), WEILER COMMODOR L&Z sústruh z nemeckej armády - Dobrý prevádzkyschopný stav - Sústružnícky priemer 180 mm - Dĺžka sústruženia 1000 mm - Priechod vretenom 56 mm - Rozsah otáčok 25 - 2000 ot./min - Závity / metrické / palcové atď. - Automatické pozdĺžne a priečne posuvy - Koník MK 4 - Trojčeľusťové skľučovadlo 250 mm - Elektrická ochrana skľučovadla - Multifix základný držiak a vložky - Chladiace zariadenie - Ochranná zadná stena proti trieskam Dcodpfx Asykknfoavsk - Dokumentácia stroja Rozmery: D x Š x V 2,5 x 1,3 x 1,7 m / Hmotnosť: 1500 kg Možnosť omylov a chýb vyhradená

Stav: použitý, Priemer sústruženia nad lôžkom / mm Priemer sústruženia nad suportom / mm Dĺžka sústruženia / mm Dsdpfx Aaowgi Tmjvock

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Weiler Condor 81 Lathe with Heidenhain Digital Readout, Year 1992, in excellent original condition The machine originates from the training workshop of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2003 Engine and toolroom lathe WEILER Type Condor 81 Centre distance: 750 mm Swing over bed: 330 mm Centre height over bed: 165 mm Swing over cross slide: 180 mm Centre height over cross slide: 90 mm Spindle bore: 40 mm Chuck fitting: Short taper DIN 55027, size 5 Tailstock quill taper: MT 3 Quill stroke: 110 mm Spindle speed: 45 – 2800 rpm, 16 steps Drive power: 3 kW Power supply: 400 V, 50 Hz Spindle speed via 16-step gearbox Dimensions (L x W x H): 1850 x 950 x 1400 mm Weight: 1100 kg Accessories and Equipment: Röhm 3-jaw chuck Multifix quick-change toolpost Coolant system Heidenhain digital readout About the machine: Djdpfx Aasw T U Sgsvjck We are offering a Weiler Condor 81 lathe with Heidenhain digital readout, year of manufacture 1992, in excellent condition. Of course, the machine is fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler operates very quietly. This newer generation of lathes is extremely user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to inspect this machine under power at our premises and see its condition for yourself. Further lathes from renowned manufacturers can be found on our website.

Stav: použitý, Dĺžka sústruženia 500 mm Priemer sústruženia nad lôžkom 297 mm Priemer sústruženia nad suportom 160 mm Vrtanie vretena 36,0 mm Upínanie podľa DIN 55022, veľkosť 5 Vreteník: kužeľ 3 MK Posuv pinoly 90,0 mm Rozsah otáčok 30 – 3550 ot./min Otáčky motora: 1410 / 2830 ot./min Celkový výkon 3,3 kW Napätie 380 V Hmotnosť približne 620 kg. Rozmery D-Š-V 1420 x 700 x 1200 mm Pôvod zo strednej odbornej školy - veľmi dobrý stav (!!) Pravidelne servisovaný spoločnosťou WEILER Obzvlášť vhodný na stredne veľké presné sústružené dielce Dcedpfx Aexaccxoavsk Vybavenie: - robustný sústruh s vodiacim a ťažným vretenom - KLOPFER štvorčeľusťové skľučovadlo Ø 140 mm - Držiak upínacích klieštín s množstvom klieštin - Kľúč na skľučovadlo - MULTIFIX držiak nožov typu A s 3 novými vložkami - Posuvný koník - Nastaviteľný doraz lôžka - Ovládací panel vpredu vľavo - Automatické posuvy pre priečny a horný suport - Motor s prepínateľným počtom pólov - Stojan stroja so skrinkovými dvierkami (úložný priestor) - Zadná ochranná stena proti trieskam

Stav: použitý, Dreh length: 500 mm Swing diameter over bed: 297 mm Swing diameter over cross slide: 160 mm Spindle bore: 36.0 mm Mounting: DIN 55022 size 5 Quill taper: 3 MT Quill travel: 90.0 mm Spindle speeds: 30 - 3550 rpm Motor speeds: 1410 / 2830 rpm Total power requirement: 3.3 kW Dsdpexacirefx Aavjck Voltage: 380 V Machine weight approx.: 620 kg Dimensions (LxWxH): 1420 x 700 x 1200 mm From a vocational school – very good condition (!!) Regularly serviced by WEILER factory service Especially suitable for medium-sized precision turned parts Equipment: - Robust leadscrew/feed shaft lathe - KLOPFER 4-jaw chuck Ø 140 mm - KLOPFER 3-jaw chuck Ø 140 mm - Collet chuck with extensive set of collets - Hinged chuck guard - Chuck key - MULTIFIX toolpost A, with 3x new tool holders - Adjustable tailstock - Adjustable bed stop - Control panel, front left - Automatic feeds for facing and cross slide - Pole-changing drive motor - Machine base with cabinet door (storage compartment) - Chip splash guard (rear) - Emergency stop button, lower right - Machine leveling feet - Original operating manual

Stav: použitý, Dĺžka sústruženia 800 mm Priemer sústruženia 280 mm Priemer sústruženia nad suportom 150 mm Priechod vretena 42,0 mm Upínanie pinoly koníka MK 3 MK Šírka lože 208 mm Otáčky 42 - 2022 ot/min Upínanie vretena DIN 55027/5 Zdvih pinoly 90,0 mm Napätie 380 V Celkový príkon 3,0 kW Hmotnosť stroja cca 750 kg Djdpfx Aoxacg Rjavjck Rozmery D-Š-V 1800 x 800 x 1250 mm Vďaka svojej konštrukcii (typ prevedenia, výkon, posuvy, ...) môže byť úspešne nasadený ako vo výučbových dielňach, tak aj v nástrojárňach a opravárenských prevádzkach. Vybavenie: - robustný konvenčný sústruh s vodiacim a ťahovým vretenom - WMW 3-čeľusťové skľučovadlo Ø 150 mm - Príruba/plánovací kotúč 280 mm - MULTIFIX rýchloupínací držiak s vložkou - posuvný koník - kľúč na skľučovadlo - stojan stroja s úložným priestorom - prepínateľný motor pohonu so zmenou pólov - návod na obsluhu

Stav: vyžaduje opravu (použité), Dĺžka sústruženia 1000 mm Priemer sústruženia nad lôžkom 380 mm Priemer sústruženia nad suportom 190 mm Otáčky vretena 25 - 2000 ot/min Počet rýchlostí 18 Priemer vretenového otvoru 56,0 mm Upnutie pinoly koníka MK DIN 228 / MK 4 Výsun pinoly 150 mm Šírka lôžka 310 mm Príruba vretena DIN 55027 / 6 Dcodpfsw U U Uqjx Aavok Pozdĺžne posuvy 0,022 - 0,8 mm/ot Priečne posuvy 0,011 - 0,4 mm/ot Závity metrické 0,3 - 10,0 mm Prevádzkové napätie 380 V Celkový príkon 7,5 kW Hmotnosť stroja cca 1600 kg Základné funkcie sú prítomné Stroj má viacero netesností Predaj v aktuálnom stave za špeciálnu cenu! Sústruh s presne brúseným a indukčne kaleným lôžkom. Veľmi vhodný napr. na použitie v dielňach a školiacich strediskách. - Video stroja - ?v=zCGu4i6V5dM Vybavenie: - robustný sústruh s vodiacou a ťažnou skrutkou - FORKARDT 3-čeľusťové skľučovadlo Ø 200 mm, s kľúčom - MULTIFIX držiak nožov - veľkosť B - s 3x vložkami - posuvný koník vrátane rýchloupínacieho skľučovadla - ochrana proti trieskam, zadná stena - núdzové vypínač vpredu - nastaviteľný doraz lôžka - chladiace zariadenie vrátane zbernej nádoby - návod na obsluhu (PDF)