Weiler Praktikus kúpiť použité (180)

Stav: dielensky repasované (použité), Rok výroby: 1989, Universal lead and feed screw lathe Manufacturer: WEILER Model: Condor B Year of manufacture: 1989 - overhauled Newly painted RAL 7035 light grey Machine no.: 1401 With warranty Kodpfeg R S Rcsx Aafsdi Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electrical interlock, new - Quick-change tool post, base body size B - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - Used, as seen -

Stav: veľmi dobrý (použitý), Rok výroby: 2017, Weiler Primus VCD (2017) presný sústruh Výrobca: Weiler Ksdex Nkdxspfx Aafedi Typ: Primus VCD presný sústruh Rok výroby: 2017 Stav: použitý, veľmi dobrý, ako nový, po novej údržbe podľa továrenskej špecifikácie s preberacím protokolom Dodávka zahŕňa: - Dokumentácia

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout by K&C, from vocational school use. Technical Specifications: >> Year of manufacture: 1992, Machine no.: 92 160 3271 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock Kdodpfx Aox H S D Ieafji >> Tailstock: Morse taper 3 >> Feeds: 0.02–0.63 mm/rev >> Thread types: metric, inch, module, and diametral pitch >> Metric thread pitches: 0.25 to 8 mm >> Weight: approx. 680 kg >> Engageable spindle brake >> Dimensions (LxHxD): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, count direction reversal >> Collet chuck with new collets from 3 to 26 mm, in 1 mm increments >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Coolant system >> Operating manual, spare parts list About the machine: Offered here is a Weiler Praktikant 160 B lead and feed screw lathe, toolmaker’s precision, year 1992, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Weiler also operates quietly even at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for ground-like surface finishes. You are welcome to view and test the machine under power on site to verify its condition for yourself.

Stav: veľmi dobrý (použitý), Pracovný priemer nad lôžkom: 280 mm Pracovný priemer nad suportom: 160 mm Kdjdpswm Rmuefx Aafji Dĺžka sústruženia: 500 mm Výška hrotov: 140 mm Vzdialenosť medzi hrotmi: 500 mm Priechod vretena: 36 mm Otáčky vretena: 15 - 3550 ot./min Hlavička vretena: DIN 55022 veľ. 5 Pozdĺžne posuvy: 0,008 - 0,560 mm/ot. Priečne posuvy: 0,004 - 0,280 mm/ot. Metrícký závit – stúpanie: 0,2 - 12 mm Priemer vodiaceho vretena: 24 mm Stúpanie vodiaceho vretena: 6 mm Upnutie pinoly koníka: MK 3 Vysunutie pinoly koníka: 90 mm Priečne posunutie koníka z osovej polohy: 15 mm Celkový príkonný výkon: 2,2 kW Hmotnosť stroja cca: 0,6 t Rozmery stroja (D x Š x V): 1,40 x 0,70 x 1,20 m - Stroj z učňovskej dielne - Príslušenstvo: Digitálne odmeriavanie na 3 osiach, 4-čeľusťové skľučovadlo RÖHM 140 mmø, MULTIFIX hlava veľ. A Číslo stroja: 4743

Stav: použitý, Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Matador VS2 sústruh, rok výroby 1992, trojčeľusťové skľučovadlo, Multifix rýchloupínací systém, zadný ochranný kryt proti striekaniu, elektrická ochrana skľučovadla. Stroj je v dobrom, prevádzkyschopnom stave, možné predviesť pod prúdom po dohode. Kedpfex Sqvgsx Aafjdi

Stav: dobrý (použitý), Rok výroby: 2008, Weiler DZ 40, rok výroby 2008, riadenie Siemens 840 D, pojazd X/Z 200/350 mm, priemer sústruženia 180 mm, maximálny obehový priemer 560 mm, os Y +/- 25 mm, os Q / programovateľný koník, pojazd osi Q 360 mm, merací systém osi Q rotačný, koník MK 4, hlavné vreteno max. priechod tyče 42 mm, vretenová diera 52 mm, rýchloposuv X/Z/Q 30/30/20 m/min, revolver 16 pozícií – všetky stanice poháňané, VDI 25, priemer stopky 25 mm, poháňané nástroje do 4 500 ot/min, miska na dielce, príslušenstvo, držiaky pre poháňané nástroje, pevné držiaky. Kdsdpfx Aox U S D Deafoi

Stav: takmer ako nový (použitý), Rok výroby: 2021, Funkcionalita: plne funkčný, Weiler Praktikant VCD precízna sústruh (2021) Výrobca: Weiler Typ: Praktikant VCD precízna sústruh Rok výroby: 2021 Stav: použitý, veľmi dobrý, takmer ako nový, vrátane novej údržby a meracieho protokolu pred predajom Vzdialenosť medzi hrotmi 650 mm Výška hrotu 160 mm Obežný priemer nad lôžkom 320 mm Obežný priemer nad suportom 190 mm Pozdĺžny posun suportu 150 mm Pozdĺžny posun horného suportu 110 mm Kjdpfxox Ivy Ns Aafodi Otočný rozsah horného suportu +/-65 ° Dĺžka vedenia suportu 350 mm Šírka lôžka 205 mm Prierez noža (výška x šírka) 20 x 20 mm Výška od horného suportu po os otáčania 30 mm Vretenová hlava podľa ISO DIN 702-3 (DIN55027) veľkosť 5 Priemer vretena v prednom ložisku 70 mm Priemer otvoru vretena 43 mm Vnútorný kužeľ hlavného vretena Metrické 50 Výkon pohonu 6 kW Rozsah otáčok 30 – 4000 ot./min Počet prevodových stupňov 1 Počet otáčok plynule nastaviteľný Počet posuvov 24 Pozdĺžny posuv 0,02 – 0,63 mm/ot. Priečny posuv 0,006 – 0,2 mm/ot. Priemer pinoly 40 mm Posuv pinoly 85 mm Vnútorný kužeľ pinoly 3 Mk Hmotnosť bez obalu a príslušenstva cca 1150 kg Dĺžka / šírka / výška, netto 1720x890x1700 mm Vretenová skriňa / zadná stena / bezpečnostný kryt Svetlosivá RAL 7035 Podstavec stroja / lôžko stroja Bazaltovosivá RAL 7012 Puzdro displeja Modrá NCSS 4550-R80B

Stav: veľmi dobrý (použitý), Rok výroby: 2006, Výška hrotu: 160 mm Kdedpfx Aow Sn Iroafoi Vzdialenosť medzi hrotmi: 650 mm Otáčky vretena: 2 500 min-1 Multifix Koník Príslušenstvo

Stav: veľmi dobrý (použitý), Rok výroby: 1992, Funkcionalita: plne funkčný, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: • Year of manufacture: 1992 • Machine No.: 92 160 3260 • Centre height: 160 mm • Centre distance: 650 mm Kdedpfxox Eb A Us Aafji • Spindle speeds: from 24 to 2500 rpm • Spindle bore: 40 mm • Short taper spindle nose DIN 55027 Size 5 with bayonet lock • Tailstock: MT 3 • Feeds: from 0.02 to 0.63 mm/rev • Thread types: metric, imperial, module, and diametral pitch • Metric thread pitches: from 0.25 to 8 mm • Weight: approx. 680 kg • Spindle brake can be engaged • Dimensions (LxHxD): 1.6 m x 1.25 m x 0.7 m Accessories and Equipment: • 3-axis digital readout by K&C with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, display halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, direction of count switching • Collet chuck system with NEW collets from 3 to 26 mm in 1 mm increments • 160 mm 3-jaw chuck (hard jaws) with 1 set of jaws • Quick-change toolpost with 4 steel holders • Bed stop • Electronic spindle guard • Rear splash guard • Coolant system • Operating instructions and spare parts diagram About the Machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe in toolmaker’s accuracy, year of manufacture 1992, in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The Weiler also runs smoothly at high speeds. This newer generation of Weiler lathes is very operator-friendly and allows for finishes comparable to grinding. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Stav: dielensky repasované (použité), Rok výroby: 1977, Mechanikársky sústruh Značka: WEILER Model: MDU 260 Rok výroby: 1977 - dielensky preverený Výrobné číslo: 14942 Výška hrotu: 125 mm Priechod vretenom: 28 mm Príslušenstvo: - Elektrický kryt skľučovadla - 3-čeľusťové skľučovadlo Ø 140 mm vrátane sady sústružníckych čeľustí vrátane sady vŕtacích čeľustí - 4-čeľusťové skľučovadlo Ø 140 mm vrátane sady sústružníckych čeľustí vrátane sady vŕtacích čeľustí - Bezpečnostný kľúč pre skľučovadlo - Ručné upínacie zariadenie - Sada upínacích klieštin W28 (366E) - Sada (=25 ks) upínacích klieštin W28 (366E) od 1,0 po 25,0 mm v krokoch po 1,0 mm - Pevný hrot pre vreteník W28 (366E) - Rýchloupínací držiak nožov základné teleso veľ. A - Návod na obsluhu Kodpfx Aoxv A I Teafedi Použité, predané ako vidíte, bez záruky Stroj zodpovedá technickému stavu v čase výroby.

Rok výroby: 1977, stav: použitý, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, 3-jaw chuck, and Multifix quick-change toolpost. The guideways show wear in the front section. The machine is in operational condition and can be demonstrated under power by prior arrangement. Kdjdpfx Ajmdn Dxoafei

Stav: použitý, Rok výroby: 2007, prevádzkové hodiny: 41 000 h, otvor vretena: 165 mm, dĺžka sústruženia: 3 000 mm, sústružnícky priemer: 830 mm, sústružnícky priemer nad lôžkom suportu: 1 200 mm, ťah perom: 400 mm, priemer pinoly: 140 mm, krútiaci moment: 8 000 Nm, Technické údaje ----- Max. dĺžka sústruženia: 3 000 mm Kdodpfsv Nhxzex Aafsi Priemer sústruženia: 830 mm Max. priemer sústruženia nad lôžkom: 1 200 mm Šírka lôžka: 600 mm Priechod vretena: 165 mm Vretenová hlava: DIN55027 veľ. 15 Skľučovadlo: Forkardt 3KS 800 mm Rozsah otáčok: 1 - 280 / 4 - 900 ot./min. Počet stupňov prevodovky: 2 Krútiaci moment: 8 000 Nm Počet revolverov: 1 Sauter 4-polohový hlavový revolver pre upnutie 140 mm Koník Priemer pinoly: 140 mm Výsun pinoly: 400 mm Vybavenie ----- Elektronické ručné koliesko Hydraulické silové skľučovadlo Forkardt 3KS 800 mm Dopravník triesok

Rok výroby: 1986, stav: použitý, Weiler Primus sústruh, rok výroby cca 1986, trojčeľusťové skľučovadlo, revolverové rýchloupínacie zariadenie Multifix. Stroj je v dobrom stave, po dohode je možné predviesť v chode pod napätím. Kodpfx Aaon Ard Dofedi

Stav: veľmi dobrý (použitý), Top stav, pravidelne servisované (faktúry k dispozícii), veľa príslušenstva! Kedexw D S Aspfx Aafsdi

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Kedpou Aftgjfx Aafodi >> Center height: 120 mm >> Center distance: 430 mm >> Spindle speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Camlock spindle nose KK4 DIN 55027 >> Tailstock quill: MT2 >> Feed rates from 0.03 to 0.15 mm/rev >> Threading capability: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Equipment and Accessories: >> 1 pc. 160 mm 3-jaw chuck with 1 set of jaws >> 1 pc. New 125 mm 3-jaw chuck with 2 sets of jaws >> Collet chuck system with collets from 1 mm to 20 mm, in 1 mm increments >> Multifix size A toolpost with 3 tool holders >> Stop >> Change gears About the Machine: For sale is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully operational. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. The Primus was previously located in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce surfaces comparable to grinding. Take the opportunity to inspect this machine under power on site and see for yourself its condition.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985 Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Kodpfxjvtp Ede Aafedi Equipment and Accessories: >> 1 x 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck system with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electrical spindle guard About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is of course fully functional. The slides all operate very smoothly and evenly. The Weiler also runs quietly at high spindle speeds. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and is capable of producing ground-like surface finishes. Take the opportunity to inspect this machine under power on site and verify its condition for yourself.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of Manufacture: approx. 1990, Machine No. 3150 >> Center Height: 120 mm >> Center Distance: 430 mm >> Spindle Speed: 60 - 3000 rpm, 18 geared steps >> Spindle Bore: 23 mm >> Short Taper Spindle Nose DIN 4 >> Tailstock: Morse Taper No. 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible Threads: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.25 to 2.5 mm >> Engagable Spindle Brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 3-jaw chuck NEW 125 mm, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Brand new collet chuck system with collets from 3 to 26 mm in 1 mm increments About the Machine: Kedpfxsvivmye Aafjdi Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move smoothly and uniformly. The bed guides are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Stav: veľmi dobrý (použitý), Rok výroby: 1997, Funkcionalita: plne funkčný, Weiler center lathe model Condor B, lead and feed screw lathe with new K&C 3-axis digital readout, CE compliant! Kedpfx Aaoxcuazofjdi Technical data: - Machine No.: 2442, Year of manufacture: 1997 - Center height: 165 mm - Center distance: 750 mm - Spindle speeds: from 22 to 2800 rpm - Spindle bore: 40 mm - Camlock spindle nose DIN 55027, size 5 with bayonet lock - Tailstock: Morse taper 3 - Feeds: from 0.015 to 0.46 mm/rev - Thread types: metric, imperial, module, and diametral pitch - Metric thread pitches: 0.18 to 28 mm - Weight: approx. 1,100 kg - Electrically engageable spindle brake - Dimensions: length 1.83 m, height 1.29 m, depth 0.88 m Equipment & accessories: - New K&C 3-axis digital readout with 12 months manufacturer’s warranty and operating manual. Functions: mm/inch conversion, ABS/INC coordinate selection, value halving, reference mark, tooling program for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, direction reversal - 1 piece NEW 160 mm 3-jaw chuck with 2 sets of jaws - 1 piece 200 mm 4-jaw chuck with 1 set of jaws - NEW collet chuck and NEW collet set from 3 to 25 mm in 1 mm increments - Multifix size B with 2 tool holders - Bed stop - Electronic spindle protection - Rear splash guard - Machine feet Safety equipment: electronic spindle guard, 2 emergency stop buttons, change gear box with end switch, spindle brake About the machine: For sale is a Weiler Condor in very good condition. The machine is, of course, fully functional. It is a very robust and powerful lathe. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our location.

Stav: veľmi dobrý (použitý), Rok výroby: 1987, Funkcionalita: plne funkčný, Weiler Precision Lathe Model Condor 81, Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout by K&C Technical Data: >> Year of manufacture: 1987 Machine no. 87 835 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm Kdodowrmuxepfx Aafji >> Spindle bore: 40 mm >> Camlock spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Threads possible: Metric, Inch, Module and Diametral Pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight: approx. 1,100 kg >> Switchable spindle brake >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> NEW K&C 3-Axis Digital Readout, 12-month manufacturer's warranty with operating manual Functions: mm/inch display switch, coordinate selection ABS/INC, value halving, reference point, tool programming for up to 200 tools, taper calculation, radius/diameter mode, quick zero setting, direction of counting switch, etc. >> 1 piece 160 mm 3-jaw chuck, NEW, with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck, with 1 set of jaws >> Collet chuck and NEW collets from 3 to 26 mm in 1 mm increments >> Multifix size B with 2 toolholders >> Bed stop >> Electronic spindle safety guard >> Rear panel >> Coolant system >> Machine feet About the Machine: Offered is a used Weiler Condor 81 in very good condition. The machine is, of course, fully functional, has been completely dismantled, and repainted. A very robust and high-performance machine. The new K&C 3-axis digital readout makes work even easier and more precise. The machine has been electrically and mechanically tested in our workshop. A complete oil change has also been performed. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test the machine under power at our facility.

Stav: veľmi dobrý (použitý), Rok výroby: 1991, Funkcionalita: plne funkčný, Weiler Centre Lathe Model Condor B Lead and Feed Screw Lathe with NEW 3-axis Digital Readout by K&C from Training Workshop!! Technical data: >> Machine-No. 91-1814, Year of manufacture: 1991 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MT 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake switchable >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Kdedpjw Nw Dqsfx Aafoi Accessories and equipment: >> 3-axis digital readout by K&C, new, 12 months manufacturer's warranty, with operating manual Functions: mm/inch switch, coordinate selection ABS/INC, value halving, reference mark, tool data for up to 200 tools, taper calculation, radius/diameter display, fast zeroing, counting direction reversal >> 1 piece new 160 mm 3-jaw chuck with 2 sets of jaws >> 1 piece 160 mm 4-jaw chuck with 1 set of jaws >> New collet chuck and new collets from 2 to 24 mm, incremented by 1 mm >> Multifix size B with 2 holders >> Bed stop >> Electronic spindle guard >> Rear splash guard >> Fixed steady >> Machine feet For safety: electronic spindle guard, 2 emergency stop buttons, change gear case with limit switch, spindle brake About the machine: Offered is a Weiler Condor in very good condition. The machine is, of course, fully functional. A very robust and high-performance machine. The new K&C 3-axis digital readout makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been done. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to view and test this machine under power at our site.

Stav: veľmi dobrý (použitý), Funkcionalita: plne funkčný, Weiler engine lathe model Condor 81, leadscrew and feed shaft lathe with 3-axis Heidenhain digital readout Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Centre height: 165 mm >> Centre distance: 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock taper: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Thread types possible: metric, imperial, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm Kjdpfxexu Hlao Aafjdi >> Weight approx. 1,100 kg >> Spindle brake selectable >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and features: >> 3-Axis Heidenhain digital readout >> 1 pc. three-jaw chuck (new) with 2 sets of jaws >> Collet chuck, collets from 3 to 30 mm (40 pcs, some duplicates) >> Multifixed size B with 3 tool holders >> Bed stop >> Machine feet >> Drill chuck >> Live center Safety features: >> Leadscrew and feed shaft cover >> 2 emergency stop buttons >> Spindle brake About the machine: A used Weiler Condor 81 lathe, year of construction 1988, in very good condition is being offered. The machine is, of course, fully functional. For safety, the leadscrew and feed shaft are equipped with a protective cover. This is a very robust and high-performance machine. The 3-axis Heidenhain digital readout makes operation easier and more precise. The machine has been electrically and mechanically tested by us. A complete oil change was carried out. This newer generation of Weiler lathes is extremely user-friendly. Take the opportunity to inspect and test this machine under power at our location.

Rok výroby: 1973, stav: veľmi dobrý (použitý), Turning length 125 mm Machine weight approx. 0.4 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R Precision Mechanic Lathe Type MDU Year of manufacture 1973 #13010 _____ Centre height 125 mm Max. turning diameter over cross slide 140 mm Max. swing diameter over bed 260 mm Centre distance 500 mm Spindle bore 28 mm Range 1 – Spindle speeds: 220-1,800 rpm Range 2 – Spindle speeds: 110-3600 rpm Kedpexpxqwefx Aafsdi Spindle drive kW Total drive kW - V - Hz Weight 500 kg Accessories / Special Equipment • Equipped with a 3-jaw chuck from RÖHM 110 mm diameter, mounted • Machine base with integrated tool storage and comprehensive accessory package, consisting of collet sets Condition : very good – demonstration ready, ideal for training workshops, maintenance, etc. Please click here for a video of the machine: MDU260/4 Delivery : ex stock - as inspected Payment : strictly net upon collection - after receipt of invoice

Stav: dobrý (použitý), Rok výroby: 1988, Weiler lathe Model Condor B 2-axis digital readout Center height: 165 mm Center distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Ksdpfx Ajvgmbvjafodi Speed range: 22–2,800 rpm Tailstock taper: MT 3 Coolant pump (not connected) Work lamp Automatic longitudinal and face feed Spindle brake - Hinged chuck guard - Splash guard Weight: approx. 1,040 kg 3-jaw chuck Multifix B quick-change toolpost Live center

Stav: použitý, Rok výroby: 1999, Turning diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: WEILER Kodpfxsvm Dv Ds Aafedi LZS - Universal Lathe with Digital Readout Model PRIMUS VC Year of manufacture 1999 Center height 140 mm Max. turning Ø over cross slide 150 mm Max. swing Ø over bed 280 mm Center distance 500 mm Spindle bore 40 mm Infinitely variable speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 face feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads module Spindle drive 1.5 kW Total power consumption 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special features • SIEMENS 3-axis digital display with X-axis, Z-axis, and summing Z-axis on the compound rest • Multifix-A tool quick-change holder • Equipped with a WEILER 3-jaw chuck, Ø 140 mm, mounted • Machine base cabinet for tool storage with integrated control cabinet and coolant system • Operating manuals Condition : Very good – ready for demonstration Ideal for training workshops Delivery : ex stock, as inspected Payment : strictly net upon collection – after receipt of invoice We kindly request your order. Further lathes of all sizes available in stock – please inquire.

Stav: dobrý (použitý), Vedený a vretenový sústruh WEILER PRAKTIKANT 800 R - Priemer sústruženia nad lôžkom: 300 mm - Priemer sústruženia nad suportom: 150 mm - Dĺžka sústruženia: 800 mm - Priechod vretien: 42 mm - Rozsah otáčok vretena: 40 – 2000 ot./min - Automatické pozdĺžne / priečne posuvy - Rezanie závitov: metrický / palcový atď. - Koník: MK 3 - Trojčeľustové skľučovadlo - Ochranná stena proti trieskam + pracovné osvetlenie - Vanička na triesky - Výmenné ozubené kolesá - Skrinka na náradie - Dokumentácia Rozmery: DxŠxV: 1,8 × 0,8 × 1,6 m / Hmotnosť: 750 kg Kodpfx Asx A Uktoafjdi Možnosť chýb alebo preklepov vyhradená.