Weinig Quattromat 18 kúpiť použité (469)

Stav: dobrý (použitý), Rok výroby: 1991, Predávam profesionálny ťažký štvorspôsobový hobľovací stroj Weinig Unimat 17. Bwjdef Rtgkopfx Aansw Posuvná rýchlosť: 6,5 – 49 m/min. Pracovná šírka: 170 mm Pracovná výška: 130 mm 7 vretien (6 + univerzálne) Konfigurácia: dolná – pravá – ľavá – pravá – horná – dolná (chýba motor) – univerzálna Celkový inštalovaný výkon cca 33 kW Vrátane frézovacích hláv a príslušenstva ako na obrázku. Stroj je vhodný najmä na výrobu drevených obkladov, parkiet a podláh. Plne funkčný! K dispozícii ihneď. Vyžaduje opravu: - Prasknutý stôl (dá sa podložiť) - 1 ks motoru pre vreteno č. 6 chýba

Stav: použitý, Weinig Profimat 22 a 4, ľavý posuvný agregát so snímačom merania na automatické nastavenie podľa šírky spracovávaných dielov. Bwjdjryb D Sopfx Aansw Rozmery a hmotnosť: 330 × 145 × V160 cm. Hmotnosť 1 400 kg (na palete).

Rok výroby: 1990, Stav: dielensky repasované (použité), štvortstranná hobľovačka Weinig, 7 hláv, 7 univerzálna, rozmiestnenie horizontálna spodná, vertikálna pravá, ľavá vertikálna, pravá vertikálna, horná horizontálna, spodná horizontálna a posledná univerzálna hlava. Pohon zabezpečený cez kardany, pohon chránený spojkami Rotax. Prítlak na obrobok je zabezpečený pneumaticky. Posuv je plynulo regulovateľný frekvenčným meničom. Rýchlosť posuvu 0-42 m/min. Motory 2,5 kW a 7,5 kW. Stôl je po prebrúsení a nový. Dodatočne nové kabeláže a nová elektroinštalácia. Stroj po generálnej oprave. Záruka. Bwedpfx Aspqxnxsansw

Stav: použitý, Hobľovací a frézovací automat Weinig Hydromat 23 na štvorsmerné hobľovanie a profilovanie dreva a hranolov s vysokým posuvom so 4 poháňanými valcami v stole. Vretená: 8 Pracovná šírka: 230 mm Pracovná výška: 160 mm Vreteno 1: spodné / 11 kW / 50 mm Vreteno 2: pravé / 11 kW / 50 mm Vreteno 3: ľavé / 11 kW / 50 mm Vreteno 4: pravé / 7,5 kW / 50 mm Vreteno 5: horné / 11 kW / 50 mm Vreteno 6: spodné / 18,5 kW / 50 mm Vreteno 7: horné / 7,5 kW / 50 mm Vreteno 8: spodné / 7,5 kW / 50 mm Bjdjxl Av Nopfx Aansww Posuv: max. 60 m/min // 11 kW // hydraulicky

Stav: pripravené na použitie (použité), Rok výroby: 2001, WEINIG Planing and Profiling Technology - Used Pos. 1 BKGD-1100 Twin Resaw Bandsaw 1 unit • Year of manufacture: 1987 • Made in Sweden • Working height: 1000 mm • Maximum cutting height: 350 mm • Maximum distance, saw blade to pressure side: 250 mm • Maximum distance, saw blade to discharge side: 250 mm • Minimum distance between saw blades: 13 mm • Kerf width: 100-120 mm • Blade length: 6300 mm • Feed rate: 10-60 m/min • Saw drive power: 2x18.5 kW • Pump drive power: 4 kW • Kerf speed: 680 rpm • Tiltable feed roller, max.: 45° • Hydraulic tank: 95 l • Cleaning fluid tank: 2x10 l • Weight: 3,000 kg Pos. 2 Weinig E1 High-Mech Infeed Magazine 1 unit • Year of manufacture: 2001 • Maximum feed rate: 80 m/min • Workpiece length: 1800-6100 mm • Workpiece width: 50-230 mm • Workpiece thickness: 12-100 mm Pos. 3 Weinig Hydromat 23 6-Spindle Planer and Moulding Machine 1 unit • Year of manufacture: 2001 • Working width: 230 mm • Working height: 160 mm • Spindle configuration: o 1st, bottom: 11 kW 6000 rpm (joint) o 2nd, right: 7.5 kW 8000 rpm o 3rd, left: 7.5 kW 8000 rpm o 4th, top: 11 kW 6000 rpm (joint) o 5th, top: 7.5 kW 6000 rpm (joint) o 6th, bottom: 7.5 kW 6000 rpm (joint) • Feed rollers in table: 3 pieces • Maximum feed rate: 60 m/min • Counter bearings on 1st, 4th, and 6th spindles Pos. 4 Outfeed Magazine 1 unit • Year of manufacture: 2018 • Hungarian manufacturer • Outfeed belt: 6000 mm (powered) • Cross belt: 5 rubber conveyor belts (powered) Pos. 5 Metron 05C 100/200 Metal Detector 1 unit Pos. 6 Weinig Rondamat 960 Profile Knife Grinding Machine 1 unit • Year of manufacture: 2002 • For grinding planer and profile knives • Grinding wheel diameter: 150/225 mm • Grinding wheel width: 2,3,4,10 mm • Grinding wheel bore: 60 mm • Grinding motor power: 1.1 kW • Grinding wheel speed: 1700, 2000, 2400, 3000 rpm • With cooling unit • Maximum working width: 240 mm Pos. 7 Weinig OptiControl Tool Measuring and Display System 1 unit Pos. 8 Weinig Setting Gauge 1 unit • For setting planing knives in the cutterhead Pos. 9 Weinig Hydro Planer Heads, Profile Cutterheads, Tongue & Groove Sets • 27 pieces Pos. 10 BÖHL Junior S-450 VA Wrapping Machine 1 unit • Year of manufacture: 2002 • Wrapping machine for profiles and long goods • Product dimensions: o Width: 50-420 mm o Height: 20-300 mm o Length: 1000 mm to unlimited o Maximum diagonal cross section: 420 mm • PE stretch film thickness: 17-50 μm • Roll diameter: 220 mm Bwjdpfx Aaerqhggjnjw • Roll width: 125 mm • Maximum feed rate: 20 m/min • Power rating: 3 kW • Infeed table • Outfeed table

Stav: použitý, Number of spindles: 5 units Working width: 20 - 230 mm Planing height: 8 - 120 mm Surfacing table length: 2000 mm Feed motor: 1.1 kW Feed speed infinitely variable: 2 - 12 m/min 1 WEINIG Planer and Moulder VARIOMAT incl. Multipurpose / Slotting Table ----- Machine will be cleaned and function-tested prior to delivery Technical manufacturer’s description: ----- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal bottom ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6,000 rpm Tool diameter: 125 - 145 mm Axial adjustment range: 5 mm Rebating device incl. rebate cutter MarathonCoating for table insert before and after the 1st bottom spindle Bodpfxjwugpbj Aansww 2nd spindle vertical right ----- Motor with brake: 11 kW Common motor with left vertical spindle Diameter: 40 mm Electronically adjustable speed: 3,000 - 6,000 rpm (for 11 kW/15 HP) Tool diameter for longitudinal processing: 93-232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind the fence: 180 mm Maximum profiling depth: 45 mm Axial adjustment range: 30 mm Insert segment with additional 125 mm fence lip Insert segment with additional 150 mm fence lip 3rd spindle vertical left POWERLOCK/HSK ----- Common motor with 1st right spindle PowerLock tool holder Shared speed with right vertical spindle Tool diameter for longitudinal processing: 93-232 mm Maximum profiling depth: 45 mm Minimum profiling depth at 200 mm tool diameter: 20 mm Axial adjustment range below table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal top ----- Motor with brake: 5.5 kW Diameter: 40 mm Speed: 6,000 rpm Tool diameter: 125-200 mm Maximum profiling depth: 30 mm Minimum profiling depth at 200 mm tool diameter: 20 mm Axial adjustment range: 30 mm Glazing bead removal after upper spindle 5th spindle second horizontal bottom ----- Motor with brake: 4 kW Diameter: 40 mm Speed: 6,000 rpm Tool diameter: 125-200 mm Maximum profiling depth: 15 mm Axial adjustment range: 10 mm Machine Operation ----- Both axes of all spindles—with the exception of the 1st bottom spindle—are equipped with mechanical digital readouts. Central radial adjustment with mechanical digital display for the feed together with the pressure unit ahead of the top spindle. Pressure after the top spindle is adjustable separately. Memory Function ----- For saving profile setting values Tool holder axes and pressure units before and after the upper tool holder with electronic dual displays: Function: - Store the settings of the produced profile at the push of a button under a profile number - When the profile number is recalled, the electronic dual displays show the setting values - By manually adjusting the tool holders and pressure units, the displays are matched accordingly - 99 memory slots 3-axis CNC-controlled adjustment and positioning of spindles in combination with memory function. For spindles No. 2, 3, 4 3 radial CNC-controlled adjustment and position...

Stav: použitý, Rok výroby: 1998, Unladen weight: 5,000 kg Dimensions (L x W x H): 450 x 200 x 180 cm Price: On request Four-Sided Planer / Moulder Weinig Unimat 23 Year of manufacture: 1998 Serial number: 82747 Feed speed: 5/36 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40 mm Bed with half rings 1st bottom spindle: 7.5 kW 2nd right spindle: 7.5 kW 3rd left spindle: 7.5 kW 4th top spindle: 7.5 kW 5th bottom spindle: 7.5 kW 6th universal spindle: 11 kW Total power: 55 kW Total current: 119 Amps Fuse protection: 125 Amps Transport dimensions: 4500 x 2000 x 1800 mm (L x W x H) Transport weight: +/- 5,000 kg - Year of manufacture: 1998 - Documentation available: No - Serial number: 82747 - Number of spindles: 6 - Spindle 1: - Type: Bottom - Power [kW]: 7.5 - Diameter [mm]: 40 - Spindle 2: - Type: Right - Power [kW]: 7.5 - Diameter [mm]: 40 - Spindle 3: - Type: Left - Power [kW]: 7.5 - Diameter [mm]: 40 - Spindle 4: - Type: Top - Power [kW]: 7.5 - Diameter [mm]: 40 - Spindle 5: - Type: Bottom - Power [kW]: 7.5 - Diameter [mm]: 40 - Spindle 6: - Type: Universal - Power [kW]: 11 - Diameter [mm]: 40 - Min. planing width [mm]: 20 - Max. planing width [mm]: 230 - Min. planing height [mm]: 8 - Max. planing height [mm]: 160 - Feed speed: - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 36 - Current consumption [A]: 119 - Fuse [A]: 125 - Power [kW]: 55.0 - Transport dimensions: 4500 mm x 2000 mm x 1800 mm (L x W x H) - Transport weight [kg]: 5,000 kg Financial Information VAT: The stated price is plus VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial sector equipment Bodpfxjwnh D Te Aansww Yorick Diebels

Stav: generálne opravený (použitý), Štvorstranná fréza značky Weinig, model 22A Unimatic Šírka pracovného stola: 220 mm, s ryhovaným stolom pre krátke obrobky. Posuv s kardanovým hriadeľom. Zloženie a výkony motorov: Spodný: 5,5 kW Pravý: 5,5 kW Ľavý automatický (pohyblivý hriadeľ): 5,5 kW Pravý: 5,5 kW Horný: 5,5 kW Bwsdpfju Sr Ddsx Aansw Spodný: 5,5 kW Posuvový motor: 4 kW Hydraulická jednotka pre ľavý automatický hriadeľ: 0,9 kW Ľavý pohyblivý hriadeľ sa automaticky nastavuje podľa šírky vloženého obrobku.

Stav: použitý, Rok výroby: 2014, Number of spindles: 5 units Working width: 230 mm Planing height: 120 mm Jointing table length: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Control: Memory function Weinig Powermat 600 Compact ----- Machine will be cleaned and fully checked. Short summary: ----- - 5 spindles - High-power motors - Left and top spindle electronically controlled for width and height Detailed description: ----- Technical data: Working width: 20–230 mm Working height: 10–120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter: 125–145 mm Cutterblock diameter for rebate cutters: 130–160 mm Axial adjustment travel: 5 mm Rebating device MarathonCoating for infeed table in front of 1st lower cutterblock Electronic digital readout for radial adjustment 2nd spindle – right ----- Bodjwzmu Repfx Aaneww Motor with brake: 11.0 kW Common motor with left cutterblock Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter 40 mm below table: 93–200 mm Cutterblock diameter 55 mm below table: 93–180 mm Cutterblock diameter for straight knife heads max. 163 mm Max. tool diameter behind fence line: 180 mm Max. profiling depth: 35 mm Axial adjustment travel: 55 mm 3rd spindle – left ----- Motor with brake: Common motor with the 2nd spindle Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter 40 mm below table: 93–200 mm Cutterblock diameter 55 mm below table: 93–180 mm Cutterblock diameter for straight knife heads max. 163 mm Max. profiling depth: 35 mm Axial adjustment travel: 55 mm Radial spindle adjustment CNC-controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter: 93–200 mm Cutterblock diameter for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment travel: 40 mm Radial spindle adjustment CNC-controlled Divided pressure shoe in front of top cutterblock, adjustable to the cutterblock diameter and swing-away from the tool, spring-loaded. Pressure shoe before and extraction after the top spindle with electronic digital indicators, integrated into the memory function or PowerCom. 5th spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Cutterblock diameter: 93–200 mm Max. profiling depth: 15 mm Axial adjustment travel: 35 mm Feed system ----- Electronic feed, infinitely variable with brake: 4 kW, 5–30 m/min Infeed roller before 1st lower cutterblock, pneumatically controlled up/down. Durofer pointed tooth rollers with depth limiter and self-cleaning. Feed roller adjustment relative to the left cutterblock, axial 35 mm Machine electrics ----- Operating voltage: 400 V (voltage range 380–420 V), 50 Hz All spindles IE2 version Electrical design to DIN VDE 0113, electrical equipment of industrial machines EN60204, IEC-204-1. Further electrical regulations not considered. Mach...

Stav: použitý, Rok výroby: 2009, Štvorsranný hobľovací stroj Weinig Variomat Rok výroby: 2009 Sériové číslo: 113680 400 V, 32 kW, 64 ampér Minimálna – maximálna pracovná šírka: 20–230 mm Minimálna – maximálna pracovná výška: 8–120 mm Maximálny priemer nástroja vertikálneho vretena: 232 mm Maximálny priemer nástroja horizontálneho vretena (okrem prvého): 200 mm Dĺžka podávacieho stola: 1950 mm Rýchlosť posuvu: 6–12 m/min Priemer vretena: 40 mm Otáčky vretena: 6000 ot./min 1. vreteno dole: 5,5 kW 2. a 3. vreteno vľavo a vpravo: 7,5 kW 4. vreteno hore: 11 kW 5. vreteno dole: 5,5 kW Bsdpfewnhh Esx Aanjww Upozornenie: 5. vreteno nie je funkčné. Rozmery: 4000 × 1400 × V1350 mm, hmotnosť 2500 kg. - Rok výroby: 2009 - Dokumentácia dostupná: Nie - Označenie CE: Áno - Sériové číslo: 113680 Finančné informácie: DPH: Uvedená cena je bez DPH DPH/Oddelené zdanenie: DPH je odpočítateľná pre podnikateľov Doručenie a výkup je možné kedykoľvek pre všetky stroje z priemyselného sektora. Yorick Diebels

Stav: použitý, Weinig Unimat U17N moulder with 7+1 spindles, spindle length 170 mm, equipped with grooved table and cardan shaft feed. Spindle configuration: Bwodpfx Aaopfp Elenow Bottom, right, left, right, top, bottom, left, universal. Spindle motor power: 4+4+5.5+5.5+7.5+5.5+5.5+7.5 kW. Feed motor power: 4 kW, raise/lower 0.75 kW.

Stav: použitý, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Length of infeed table: 2500 mm Feed motor: 4 kW Feed speed: 5–30 m/min Bedouzaa Sjpfx Aaneww Weinig Powermat 400 with HSK/Powerlock, CNC-controlled axial/radial adjustment ----- Machine is overhauled and functionally tested! Summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock CNC-controlled axial and radial adjustment of the spindles via the control system CNC-controlled adjustment and positioning of the feed system Detailed Description: ----- Technical Data: Working width: 20–230 mm Working height: 8–120 mm Number of spindles: 6 1. Tool holder – bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 6,000 rpm Tool diameter: 93–160 mm Axial adjustment: 5 mm Rebate device MarathonCoatin table insert in front of the 1st lower tool holder 2. Tool holder – PowerLock – right ----- Motor with brake: 11.0 kW Shared motor with left tool holder Speed including high-performance ball bearings: 8,000 rpm Tool diameter 40 mm below table surface: 93–200 mm Tool diameter 55 mm below table surface: 93–180 mm Tool diameter for straight knife heads max.: 163 mm Max. tool diameter behind fence: 180 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Spindle CNC-controlled axially and radially 3. Tool holder – PowerLock – left ----- Motor with brake: shared with 2nd spindle Speed including high-performance ball bearings: 8,000 rpm Tool diameter 40 mm below table surface: 93–200 mm Tool diameter 55 mm below table surface: 93–180 mm Tool diameter for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Spindle CNC-controlled axially and radially 4. Tool holder – PowerLock – top ----- Motor with brake: 7.5 kW Speed including high-performance ball bearings: 8,000 rpm Tool diameter: 93–200 mm Tool diameter for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Split pressure shoe in front of upper tool holder, adjustable to tool flight circle and pivotable, spring-loaded. Spindle CNC-controlled radially 5. Tool holder – PowerLock – top ----- Motor with brake: 7.5 kW Speed including high-performance ball bearings: 8,000 rpm Tool diameter: 93–200 mm Tool diameter for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Split pressure shoe in front of upper tool holder, adjustable to tool flight circle and pivotable, spring-loaded. Spindle CNC-controlled axially and radially 6. Tool holder – PowerLock – bottom ----- Motor with brake: 7.5 kW Speed including high-performance ball bearings: 8,000 rpm Tool diameter: 93–200 mm Max. profiling depth: 15 mm Axial adjustment: 35 mm Spindle CNC-controlled radially Feed system ----- Frequency-controlled feed, steplessly adjustable with brake: 4 kW, 5–30 m/min In...

Stav: použitý, Rok výroby: 1986, Dimensions (L x W): 175 x 603 cm Four-Sided Planer Weinig Profimat 22N Serial Number: 226 - 742 400 V, 40 Amps. Maximum working width: 220 mm Maximum working height: 120 mm Infeed table length: 1,950 mm Feed speed: 4–20 m/min Bodownhh Sspfx Aanjww Spindle diameter: 40 mm Spindle speed: 6,000 rpm 1st spindle (bottom): kW 2nd & 3rd spindle (left & right): kW 4th spindle (top): kW Dimensions: 3400 x 1500 x 1400 mm, net weight 1,600 kg - Year of manufacture: 1986 - Documentation available: No - Serial number: 226 - 742 - Transport packages [pcs.]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/margin scheme: VAT deductible for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stav: použitý, Pozdĺžna fréza značky Weinig, model PFA17N, s ryhovaným stolom, 8 hriadeľmi (spodný 4 kW, pravý 4 kW, ľavý 5,5 kW, pravý 4 kW, horný 5 kW, spodný 4 kW, univerzálny 4 kW, univerzálny 4 kW), použitá. Bwsdpfjk N I I Njx Aanew

Stav: použitý, Number of spindles: 4 pcs Number of tool sets: 11 pcs Spindle diameter: 50,40 mm Spindle length: 285,125 mm Length: 4000 mm Width: 2000 mm Height: 2200 mm Weinig Univar 10/3 Rebate Milling Machine ----- For milling the rebates of windows, doors, and similar components with irregular, circumferential profiles. The machine is suitable for wood thicknesses from 68 to 92 mm. Time required for rebate milling per frame, average size 1.20 x 1.20 m: approx. 2 min. The available tool positions are selected via a rotary switch at the operator panel. The machine is equipped with 3 hydraulically controlled right-hand precision lift spindles capable of accommodating 3 tool sets—each spindle offers two lifting strokes of 95 mm. The spindle lift operates in a U-movement, minimizing the size of the opening in the fence for short parts. The spindle stroke is finely adjustable horizontally for both tool positions from the operator side. Central lubrication is provided for the spindle units. For splinter-free rebate milling of window sashes, frames, or doors, the first spindle can be switched to right or left rotation. For each of the last 100 mm of a frame end, this spindle, equipped with the corresponding climb-cutting tool, plunges into the passing timber. This prevents the counter-rotating tool of the following spindle from causing tear-out. The first seven transport rollers can be raised with a foot switch, which reduces throughput time. An additional support rail allows for machining large-scale frames. Continuous, chainless rubber roller feed with extremely short roller spacing. Feed beam height adjustment with electronic readout. Electrical specification according to VDE standards. Machine is supplied with operating tools, but without machining tools. Technical data: Min. working width: 40 mm Working height: min. 30 mm, max. 100 mm 1st profiling spindle (climb/non-climb operation) ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference circle: 112–140 mm Max. tool diameter: 232 mm Vertical spindle travel: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle travel: 80 mm With climb-cut plunge automation 2nd profiling spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference circle: 112–140 mm Max. tool diameter: 232 mm Vertical spindle travel: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle travel: 80 mm 3rd profiling spindle ----- Spindle motor power: 11.0 kW Spindle speed: 6000 rpm Spindle diameter: 50 mm Clamping length: 285 mm Tool reference circle: 112–140 mm Max. tool diameter: 232 mm Vertical spindle travel: 2 x 95 mm for 3 tools Default position below table: 10 mm (adjustable up to 20 mm) Horizontal spindle travel: 80 mm 4th profiling spindle – Hardware grooving unit, right ----- For routing hardware grooves during the rebate milling process or for grooving along the length profile. Pneumatic horizontal movement with selector switch at the control panel. Motor: 2.2 kW Speed: 6000 rpm Spindle diameter: 40 mm Clamping height: 125 mm, 2 tools Tool reference circle: min. 140 mm, max. 180 mm Bwsdpfx Aaevnv Uujnow Feed motor power: 1.1 kW Feed speed...

Stav: použitý, Rok výroby: 1990, Curb weight: 1,850 kg Dimensions (L x W x H): 350 x 140 x 180 cm - Year of manufacture: 1990 - Documentation available: No - Serial number: 226-4268 - Number of spindles [pcs]: 2 - └ Spindle 1: - Motor power [kW]: 4 - Max. planer block diameter [mm]: 120 - └ Spindle 2: - Motor power [kW]: 5.5 - Max. planer block diameter [mm]: 120 Bwjdpjwniquefx Aanew - └ Spindle 4: - Motor power [kW]: 5.5 - Infeed table length [mm]: 1,770 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction nozzle diameter [mm]: 140 - Transport dimensions: 3,500 mm x 1,400 mm x 1,800 mm (L x W x H) - Transport weight [kg]: 1,850 kg - Transport packages [pcs]: 1 Financial Information VAT: The stated price is net, plus VAT VAT/margin scheme: VAT deductible for commercial buyers Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Bedsvu Hghjpfx Aansww Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Rok výroby: 2007, Eigen hmotnosť: 1 kg Rozmery (D x Š x V): 22 x 128 x 167 cm Štvorsírový hobľovací stroj Weinig Unimat 300 5-osý stroj Rok výroby: 2007 Min./max. pracovná výška: 6/120 mm Min./max. pracovná šírka: 13/230 mm Pracovná rýchlosť: 6/12 m/min Bwedpfx Ajwng Uqeanew Otáčky vretena: 6000 ot./min Priemer vretena: 40 mm Dĺžka vstupného stola: 2450 mm Motory: 1. Vreteno - spodné: 5,5 kW 2./3. vreteno - ľavé/pravé: 11 kW 4. vreteno - vrchné: 7,5 kW 5. vreteno - spodné: 5,5 kW Rozmery: 4500 x 1300 x 1500 mm (D x Š x V), hmotnosť 1500 kg. - Rok výroby: 2007 - Dokumentácia k dispozícii: Nie - Prepravné rozmery: 222 mm x 1280 mm x 1670 mm (d x š x v) - Prepravná hmotnosť [kg]: 1 kg - Prepravné balíky [ks]: 1 Finančné informácie DPH: Uvedená cena bez DPH DPH/režim rozdielovej dane: DPH je odpočítateľná pre podnikateľov Doručenie a výkup kedykoľvek možné pre všetko z priemyselného sektora Yorick Diebels

Stav: použitý, Rok výroby: 2000, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Surface table length: 2500 + 500 mm Feed motor: 3 kW Feed speed: 6–36 m/min 1 WEINIG Planer & Moulder Unimat 23 E 6 spindles (including 2 x right), powerful motors, EM 11 infeed magazine optional Working width: 20–230 mm Working height: 8–120 mm 1st spindle bottom: 7.5 kW ----- Bsdpfx Ajwqr Rvsanoww Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 125–180 mm Rebate device incl. tool Hardened table insert before 1st bottom spindle 2nd spindle right: 11.0 kW ----- Shared motor with left vertical spindle Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-250 mm Max. tool diameter behind reference edge: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 3rd spindle left ----- Shared motor with 2nd spindle Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm Pressure shoe in front of left spindle, incl. lateral spring-loaded pressure roller 4th spindle right: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-250 mm Max. tool diameter behind reference edge: 203 mm Max. profiling depth: 35 mm Axial adjustment range: 80 mm 5th spindle top: 11.0 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-200 mm Max. profiling depth: 35 mm Axial adjustment range: 45 mm Divided pressure shoe before upper spindle, adjustable to tool swing diameter and pivoting away from the tool, spring-loaded. 6th spindle bottom: 7.5 kW ----- Diameter: 40 mm Speed: 6000 rpm Tool swing diameter: 112-250 mm Max. profiling depth: 15 mm Axial adjustment range: 45 mm General spindle features ----- All profiling spindles with high concentricity precision. Lubrication points for axial spindle movement. Vertical spindle length: 170 mm Feed system ----- Motor with mechanical brake, 3 kW Mechanical feed steplessly adjustable 6–36 m/min. Feed roller in front of 1st bottom tool pneumatically controlled high/low, Durofer pointed-tooth feed rollers (Weinig patent) with depth limiter, self-cleaning Adjustment range of feed rollers relative to left spindle, axial: 35 mm Extension of the oscillating axis relative to left spindles to 150 mm Machine electrics ----- Operating voltage: 380–400–415 volts, 50 Hz Machine frame, tables and fences ----- Surface table 2.5 m long (incl. jointing fence) Aluminum extension 0.5 m for surface table, incl. extension of jointing fence Manual Waxilit pump for table resin removal One driven rubber roller (spring-loaded in the outfeed table) Pressure elements and guides ----- Top pressure rollers, pneumatic Top pressure rollers can be swung away, opposite the right spindles for easy tool change. Machine operation ----- Pressure shoe before upper spindle with mechanical digital display. Outfeed after top spindle with mechanical digital display. ATS/E system, automatic 2-axis positioning for spindles no. 3 and 4 Min. working height 12 mm Electronic height adjustment of top spindles and feed Central lubrication points at the front of the machine Safety and sound ...

Stav: použitý, Rok výroby: 1999, Four-side planer Small Unimat 23 E Year of manufacture: 1999 Serial number: 88103 Feed speed: 5/24 m/min Workpiece width min./max.: 20/230 mm Workpiece height min./max.: 8/160 mm Spindle diameter: 40 mm Infeed table length: 1950 mm Grooved bed 1. Bottom spindle: 5.5 kW 2nd and 3rd spindle right and left: 11 kW 4th spindle top: 15 kW 5th spindle top side: 11 kW 6th spindle bottom: 5.5 kW Total rated power: 54 kW Total: 117 Amps Main fuse: 125 Amps Transport dimensions: 4200x2000x2100 mm (LxWxH) Weight approx. 4500 kg - Year of construction: 1999 - Documentation available: No - Serial number: 88103 - Number of spindles: 5 Financial Information Bodpfx Aaownh Sqensww VAT: The stated price is plus VAT VAT/Net Invoice: VAT deductible for business customers Delivery and trade-in possible at any time for all industrial machines Yorick Diebels

Stav: použitý, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L x W x H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Side Planer Profimat 23 Window Version with Glass bead separation, or can be used as grooving spindle ATS control and program control ----- Machine is currently being overhauled and function-tested Technical Data Summary (For any additionally included accessories, please inquire) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight, approx.: 2500 kg Spindle Arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically actuated up/down > Spindle 3: left > Spindle 4: top Bwedpju Su Husfx Aanjw > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically actuated up/down Spindle Description ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw 2.2 kW, 6000 rpm, 40 mm diameter Other Features ----- > Glass bead separation or can be used as grooving spindle > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with memory for 99 programs > Machine operation: window package Combined control of right spindle and glass bead removal via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads (Technical data as per manufacturer – no guarantee!)

Stav: použitý, Number of spindles: 6 pcs. Working width: 230 mm Planing height: 160 mm Surfacing table length: 1050 mm Feed motor: 7 kW Feed speed: 6–40 m/min Weinig Powermat 1200 ---- with Infeed Automation: Weinig Radmagazin EM 100, linked with Outfeed Automation: Weinig High-Mech A 1 The machine is completely overhauled at our warehouse prior to delivery! Detailed description: ---- 1. Weinig Powermat 1200 Planer and Moulder ---- Technical data: ---- Working width: 20–230 mm (for tool diameter 93–163 mm) Working height: 10–160 mm (for tool diameter 93–163 mm) 1st spindle ---- First lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 125–180 mm With PowerLock: 93–180 mm Tool diameter rebate cutter: 130–160 mm Axial adjustment: 17 mm Rebate device MarathonCoating in front of first lower tool mounting 2nd spindle ---- First right vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence: 200 mm 3rd spindle ---- First left vertical spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of left tool mounting, incl. 2 spring-loaded lateral pressure rollers 4th spindle ---- First upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Segmented pressure shoe in front of upper tool mounting, adjustable for tool diameter and pivotable away from tool, spring-loaded. Upper spindle prepped for later cassette system installation 5th spindle ---- Second upper horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–200 mm Straight cutter heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Segmented pressure shoe in front of upper tool mounting, adjustable for tool diameter and pivotable away from tool, spring-loaded. Upper spindle prepped for later cassette system installation 6th spindle ---- Second lower horizontal spindle Motor with brake: 7.5 kW Spindle diameter: 50 mm Speed: 8,000 rpm Tool diameter: 93–225 mm Max. profiling depth: 15 mm Axial adjustment: 40 mm Radial adjustment Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table: 225 mm All spindles with high concentricity precision. Lubrication points for axial tool movement. Feed system ---- Electronic feed, infinitely variable with brake, 6–40 m/min, motor 7 kW Ei... Bsdpfx Aevnwbcoanjww

Stav: použitý, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles ----- The machine will be cleaned and thoroughly inspected before delivery. Summary of Technical Data (Please inquire for any additionally included accessories.) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, continuously adjustable horizontally > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut detection > NC length stop, mounted on slotting table included Positioning of the cross-cut saw integrated in the control system. > Length: 3,500 mm Pos. 2: Tenoning and slotting spindle ----- > Number of tools: variable, adjustment stepless via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Bar guide consisting of: guide rail in the stop (area of climb-cut spindle), bar support bar from above in the area of vertical profiling unit (right) and profiling spindle. Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm Bwsdpovu Hfqefx Aansw > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions via pneumatic revolver > Radial adjustment: 125 mm, 8 positions via pneumatic revolver Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic revolver > Radial adjustment: 100 mm, 8 positions via pneumatic revolver > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Rebating unit for tear-free rebate cutting > Double part package > Return device for single-operator use: pivoting belt > Screen control > Tilt window facility > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original images available yet. Photos show an identical machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...

Stav: použitý, Number of spindles: 5 pcs Working width: 220 mm Planing height: 120 mm Infeed table length: 2500 mm Feed motor: 6 kW Feed speed: 6–22 m/min Total power requirement: 25 kW Dimensions (L x W x H): 3500 x 1500 x 1600 mm Bodpfxsv Irize Aanoww Machine weight: approx. 2000 kg 1 WEINIG four-sided planer Type: PROFIMAT 22 N with 5 spindles ----- Working width: 220 mm, working height: 120 mm Spindle configuration: 1st spindle bottom: 4.0 kW 2nd spindle right and 3rd spindle left: 7.5 kW 4th spindle top: 5.5 kW 5th spindle bottom: 4.0 kW Spindle diameter: 40 mm Feed: 3 kW, steplessly adjustable from 6 to 22 m/min Special equipment: Cardan drive Profiling package Includes 5 used planer heads. (All technical data according to manufacturer's information, without guarantee!)

Stav: použitý, Rok výroby: 2009, max. length of workpiece 4500 mm milling spindle 1 unit main motor 20 kW control Siemens Weinig Conturex 2 C 114 ----- working width: 40-260 mm working height: 25-110 mm 2 x PowerGrip clamping tables, each 2 x 2280 mm ----- workpiece length 200 - 4,500 mm Machining of workpieces longer than 2,700 mm is carried out via follow-up cycle Main spindle 1: ----- motor with brake 20 kW HSK 63F electronically adjustable speed 2,000-18,000 rpm Bodpfx Aaowunwyonoww maximum tool length from HSK 63F reference: 290 mm with C-axis Tool magazine: ----- number of positions: 30 position spacing: 100 mm Multi-spindle drilling head, fixed-mounted ----- for horizontal and vertical drilling and milling operations without tool change ----- Price ex site Prices for dismantling and loading onto customer’s truck transport within Germany and abroad as well as reassembly commissioning and, if required, new profiles available on request! Including used tools (drawings on request!): ----- wood: IV 68, 78, 88 inward and outward opening, with fitted weather bar wood-aluminium: IV 68/68, 78/78, 87/68, 97/78 lift-slide doors IV 68 and 78 front doors IV 68 and 78 tilt-and-turn windows Corner joint: counter/dowel Technical specifications as per manufacturer – subject to confirmation! Detailed technical description available on request!