Perlová píla na dvojité zasklenie

omga TRF 527

Stav: použitý, Rok výroby: 2023, DOUBLE GLAZING BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two vertically aligned glazing beads. The right sawing unit is fixed, while the left unit is adjustable; the set cutting length can be read from a digital measurement display. Both units feature supports allowing for the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swivel to the side to facilitate loading and unloading of the machine. STANDARD EQUIPMENT • Fixed right unit • Digital measurement display • Pressure monitor • 2 carbide-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure monitor • Tool kit • Safety devices with horizontal, swiveling clamping devices • Two-hand operation • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cut height without support: 80 mm • Max. cut width at 90 degrees: 55 mm • Max. cut width at 45 degrees: 40 mm • Max. cutting length: 2800 mm (optionally 4000 mm) • Min. cutting length: 158 mm • Weight: 217 kg • Required space (standard configuration): 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop with 4 positions 1 pc Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support 1 pc Adjustments for rebated profiles 1 pc Adjustments for rebated profiles according to drawing: - Attachment for clamping devices to compensate for profile inclination - Shims on the rear stops of the units and the central support In the sketch below (in green) a beveled pressure pad is shown, which follows the inclined profile and thereby presses it against the (red-marked) shim on the stop. Location: Garbsen Lrjdpexnlgcjfx Aacjw

Stav: použitý, Rok výroby: 2002, DVOJITÁ POKOSOVÁ PÍLA (PÍLA NA SKLENÉ LIŠTY) OMGA TRF 527 NC vrátane hviezdicového dorazu Rok výroby: 2002 Min. & max. vzdialenosť medzi agregátmi: 158 mm, 2800 mm Lredpfxexwumqe Aacjw Kapacita rezu pri 90°: 55 mm Kapacita rezu pri 45°: 40 mm Max. výška rezu: 40 mm Výkon motora: 2 x 1,18 kW Priemer otvoru kotúča: 30 mm Priemer pílového kotúča: 220 mm Otáčky vretena: 5000 ot./min

Rok výroby: 2005, Stav: dobrý (použitý), Predám dvojitú pokosovú pílu OMGA TRF 527, rok výroby 2005. Rezacia dĺžka: 390 - 2800 mm Lredpfxog Tumcs Aacsw Maximálna šírka rezu: 170 mm Maximálna výška rezu: 90 mm Otočné hlavy: 0 ± 45° 2 horizontálne + 2 vertikálne pneumatické prítlaky materiálu 2 motory x 1,62 kW (2,2 HP) V dobrom stave. Okamžite k dispozícii.

Stav: použitý, Rok výroby: 2017, Number of motors: 2x 1.2 kW each Working length: 2800 mm Control system: yes 0 OMGA Double Mitre Sash Bar Saw Model TRF 527 NC CE ----- Sale on behalf of customer, ex-works customer location. Machine was in use until the end, now at customer’s warehouse. Technical manufacturer’s description: Double mitre saw for the simultaneous cutting of two sash bars. The right saw unit is fixed, while the left unit is adjusted via positioning control. Features of the positioning control: - Monochrome graphic display 240 x 64 dpi - Display of 30 characters over 8 lines - Keyboard with 28 function keys - FN key for function interruption - Diagnostics and error messages - Language selection: IT, DE, EN, ES, FR, and FI - 10,000 memory lines, split into 999 cycles, max. 99 lines per cycle - RS 232 interface - Input of dimensions manually or via USB interface - 3 correction values each for left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with circulation ball bushings and runs on hardened steel shafts. Both units are fitted with supports allowing simultaneous cutting of 2 sash bars. For cutting larger cross-sections, the upper support can be removed. After cutting, the pneumatic clamping cylinders automatically swivel aside to facilitate loading and unloading of the machine. Machine equipment: - Fixed right-hand saw unit - Swivelling clamping device - Positioning control for TRF 527 NC CE - Maintenance unit Ljdpfx Asxmamnoacsrw - Central support - Carbide-tipped saw blades, Ø 220 mm - Two-hand safety control - Intermediate support for simultaneous cutting of 2 sash bars - Pneumatic lift for saw units - Motor protective switch - Pressure monitor - Undervoltage release - Overload switch - Tool kit - 2 pcs. angle-stop with 4 positions Technical data: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight: 217 kg ----- Price for the above-mentioned machine on request! ----- (Technical data provided by manufacturer – no liability assumed!) All prices quoted are net plus legally applicable VAT.

Stav: nový, Dvojčepelová píla, ktorá bola špeciálne navrhnutá na presné skracovanie zasklievacích líšt na požadovanú dĺžku, s možnosťou rovného alebo šikmého rezu. Stroj má dve pracovné úrovne, umiestnené nad sebou, čo umožňuje súčasné rezanie dvoch líšt. Oba kusy lišty sú počas rezania bezpečne upnuté prednými pneumatickými svorkami. Nastavenie požadovanej dĺžky sa dosahuje pomocou ručného ovládacieho kolieska, ktoré posúva ľavú reznú hlavu voči pevnej pravej hlave; aktuálna dĺžka sa ľahko odčíta z mechanického digitálneho ukazovateľa. Min./max. dĺžka rezu: 150 mm – 2400 mm Max. prierez rezu pri 90°: 55 x 100 mm Lrsdpfody Hqvex Aacjw Max. prierez rezu pri 45°: 40 x 100 mm 2 x kotúčové píly priemer 220 mm x 30 mm otvor Motor: 1,6 hp, trojfázový Spĺňa požiadavky CE na bezpečnosť