CNC horizontálne obrábacie centrá SCM Record 110 AL TVN Prisma 2006

SCM Record 110 AL TVN Prisma

Stav: použitý, Rok výroby: 2005, Funkcionalita: plne funkčný, Výrobca: HOLZMA Model: OPT HPP 350/43/43/X Typ stroja: Lúčová píla Dkedoxwwfvopfx Alysl Rok výroby: 2005 Prevádzkový stav: stále pripojený Dĺžka rezu: 4.300 mm Zdvih podávača: 4.250 mm Počet uchopovačov: 6 Maximálna posuvná rýchlosť: 130 m/min Plynule nastaviteľný posuv Vyloženie pílového kotúča: 80 mm Maximálny priemer pílového kotúča: 350 mm Výkon hlavného motora: 9 kW Predrývacia píla: Áno Strana dorazu: pravá strana Ovládanie: HOMAG POWER CONTROL, HOLZMA CADMATIC 4.0 Značka zhody: CE Hmotnosť: 5 000 kg

Stav: použitý, Rok výroby: 2005, 2005 BIESSE ROVER B 4.40 FT CNC obrábacie centrum na 3 osiach Technické údaje na poslednej fotografii Prevádzkové hodiny stroja: 45 343 Dodpfx Aewmdynolyekl Hodiny v automatickom režime (práca): 27 267

Stav: použitý, Paint finishing line consisting of: Pos. 1 Belt Conveyor Infeed Transport - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed rate adjustable via handwheel approx. 2.5 – 7.5 m/min - Voltage/Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos. 2 Cefla Dedusting Machine - Manufacturer: Sorbini - Model: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm +/- 20 mm - Operator side: right - Roller conveyor - Air blast channel, top: 2 pcs. - Air blast channel, bottom: 1 pc. - Dedusting brush - With ionizing bar, top - With ionizing bar, bottom - With independent drive - With separate control unit - Length approx. 910 mm - Width approx. 2,600 mm - Weight 1,260 kg - Extraction nozzle dia. 180 + 120 mm - Total connected load: 7.6 kW - Voltage/Frequency: 400 V / 50 Hz Pos. 3 Venjakob VEN SPRAY Perfect Automatic Spray Coater - Manufacturer: Venjakob - Type: VEN SPRAY PERFECT - Year of manufacture: 2013 - Working width: 1,300 mm - Working height: 940 +/- 20 mm - Operator side: left - IR preheating, number of emitters: 2 pcs. - Dual drive for spray guns - Dry extraction - Extraction nozzle diameter: 600 mm - Exhaust air output: 10,000 m³/h - Belt conveyor system - Feed speed stepless adjustable approx. 4–10 m/min - Belt cleaning system - Lacquer recovery via V-belt system - Spray gun control: EPS-CNC CNC 7000 - Colour management system for 3+1 pumps - Number of installed airless spray guns: 4 pcs. - Quick-change system for spray devices - Remote maintenance system - Dust protection hood at machine outfeed Djdpfxev I Akve Alyekl - Exhaust air recirculation system - Controlled exhaust fan - Suitable for water-based coatings - Suitable for solvent-based coatings - Length: 5,509 mm - Width: 4,500 mm + 2,400 mm - Height: 3,380 mm + 510 mm - Total connected load: approx. 20–26 kW - Voltage/Frequency: 400 V / 50 Hz - Colour: RAL 7035 - Kremlin AVX AirMix spray guns - Small volume tank - Spray gun carrier arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatic and material hoses. Pos. 4 Venjakob Belt Conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via handwheel approx. 2.5 – 7.5 m/min - Voltage/Frequency: 400 V / 50 Hz - Colour: RAL 7035 Pos. 5 Cefla High-Performance Dryer - Manufacturer: Cefla - Type: VN 2000/5500/190.5/30 - Year of manufacture: 2003 - Working width: 1,300 mm - Number of pallets: 30 pcs. - Pallet length: 5,600 mm - Usable pallet length: 5,300 mm - Load capacity per pallet: 300 kg - Max part height: approx. 110 mm - Clear height between pallets: 120 mm - Centre-to-centre (pallet): 3,658 mm - Max part length: approx. 5,200 mm - Number of controlled temperature zones: 2 pcs. - Supply air output: 6,000 m³/h - Exhaust air output: 6,000 m³/h - Max heat output: 175 kW - Max drying temperature: approx. 55–60°C - With heat exchanger, hot water - Without hot water control valves - Through-feed direction in U-form - Infeed side: right - Feed speed variable via frequency converter approx. 2–20 m/min - Suitable for water-based coatings - Suitable for solvent-based coatings - Length: 7,820 mm - Width: 6,130 mm - Height: 3,905 mm - Total connected load: approx. 23 kW - Voltage/Frequency: 400 V / 50 Hz - Voltage fluctuation max. +/- 5 % - Without control valves and water pumps Pos. 6 Belt Conveyor Infeed Transport - Manufacturer: Cefla - Working width: 1,300 mm - Length: 2,000 mm - Feed rate adjustable via

Stav: pripravené na použitie (použité), Linka na rehabilitáciu dosiek so strojmi uvedenými nižšie: Jeden dvojnožový bočný orezávač dosiek Jedna jednolistová horizontálna pásová píla Dkodsgwqk Sopfx Alyjl Dopravníkový systém medzi strojmi je súčasťou dodávky.

Stav: použitý, Rok výroby: 2011, Base machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced over the entire machine bed with welded-in components, making it extremely rigid. The table design used, with a large base, is the key to ensuring long-term precision and stability. The machine layout allows the user an optimal workflow with minimal space requirements. The mobile gantry is constructed as a solid monoblock. It is positioned in the X-direction on prismatic, ground rails via recirculating ball-bearing carriages. On this mobile unit carrier, the working unit is again mounted on prismatic, ground guides and ball-bearing carriages. AXIS MOVEMENT All axis displacement is carried out on prism linear guides with large cross-sections and recirculating ball carriages with a large contact surface, guaranteeing optimal movement even at the highest speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via a helical pinion and rack system. Recirculating ball screws with a large cross-section ensure accurate positioning of the working unit along the moving gantry (Y- and Z-axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumpers and light barrier 1 Bumpers with sensors are installed around the movable gantry, and a light barrier system is installed in front of the machine. If the operator enters the active zone, the axis speed of the X-axis is reduced to a lower value of 25 m/min without stopping the machine. The system allows workpieces to be loaded during pendulum operation without the disadvantageous access restrictions found in pressure mat systems. This prevents unwanted interruptions to the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Safety guard 1 Side and rear protective fencing Automatic central lubrication system regulated via CNC controller 1 Lubrication of the X, Y, and Z axes is regulated via the CNC controller at regular intervals without manual intervention on the machine. Central extraction nozzle 1 All individual extraction nozzles of the machining units are combined into one central nozzle. Within the nozzle, various slide valves are controlled via the NC controller. This reduces the required extraction airflow. Dkodpfx Asxy Tmnslyjl Chip conveyor 1 Maxi - 5-axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle delivering 11 kW at 20,000 rpm (S1, 100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F 18 kW inverter for stepless, uniform power delivery Max. rotation: B-axis = 200° (+/- 100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to execute complex horizontal positioning in a small workspace. This allows the machining of complex geometries without the risk of collision.

Stav: použitý, číslo stroja/vozidla: 008469, Pracovný rozsah os X: 3050 mm Pracovný rozsah os Y: 850 mm Dkjdpoywafuefx Alysl Počet riadených osí: 3 osi Počet vŕtacích vretien: 19 Počet miest na nástroje: 4

Stav: nový, Rok výroby: 2025, prevádzkové hodiny: 1 h, Funkcionalita: plne funkčný, pojazdová vzdialenosť osi X: 4 000 mm, zdvih osi Y: 1 000 mm, zdvih osi Z: 1 000 mm, výrobca ovládačov: STYLE CNC Machines, počet pozícií v zásobníku nástrojov: 24, výrobca motorov: FANUC, Dodanie po konzultácii Ref: 24F048 Rok výroby: 2025 Stav: Showroom Špecifikácia: - X-os: 4000 mm - Y-os: 1000 mm - Z-os: 1000 mm Dedpfxew Ty S Ss Alyokl - Hlavný motor 26 kW (S6) - 8000 ot/min - BT-40 - Automatický menič nástrojov (24 pozícií) - Vzdialený servis (IXON) + sieťové pripojenie - Výkonnejšie čerpadlo chladiacej kvapaliny vrátane striekacej pištole - Inovované na najnovší dostupný softvér STYLE

Stav: použitý, Rok výroby: 2011, Veľkosť obrábania v smere X: 2770 mm Veľkosť obrábania v smere Y: 1220 mm Hrúbka obrábania (rozmer Z): 80 mm Konštrukcia stroja: portálový stroj Výkon hlavného vretena: 11,0 kW Dksdpovvi Htefx Alyjl Otáčky hlavného vretena: 1500 - 24 000 ot/min Vektorovo riadené vreteno: Áno Upínací systém: HSK 63 F Chladenie vretena: vzduchové chladenie Počet osí: 3 Menic nástrojov: áno, ks Počet miest pre výmenu nástrojov: 10 ks Písací strojová klávesnica: áno Myš: áno Programový systém: Xilog Plus DXF rozhranie: áno Možnosť online pripojenia: áno CD-ROM mechanika: áno Typ stola: rasterový stôl Upínací systém: upínacie valce Počet vákuových púmp: 1 Výkon vákuovej pumpy: 250 m³/h Zabezpečenie: bezpečnostné nášľapné rohože Skladové miesto: Sonnefeld

Stav: veľmi dobrý (použitý), Rok výroby: 2007, prevádzkové hodiny: 8 000 h, Funkcionalita: plne funkčný, dĺžka sústruženia: 750 mm, sústružnícky priemer: 330 mm, otvor vretena: 41 mm, maximálna rýchlosť vretena: 4 500 ot./min, otáčky vretena (min.): 1 ot./min, výkon motora vretena: 11 000 W, priemer pinoly: 50 mm, ťah perom: 110 mm, sústružnícky priemer nad lôžkom suportu: 435 mm, celková hmotnosť: 1 400 kg, výška stredu: 165 mm, Výbava: dokumentácia / manuál, otáčky plynule nastaviteľné, For sale: WEILER E30X750 cycle-controlled CNC lathe equipped with Siemens 810 D control system. Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully operational Location: Austria (Graz) Inspection: On site or via video call by arrangement Images/Video: Additional images and operating videos available upon request. Power-on hours (machine under power): 26,492 h. The actual machining time is significantly lower. Based on experience, actual spindle running time (turning operations) amounts to approximately 30% to 50% of this value (approx. 8,000 to 13,000 hours). Technical specifications: Work area: Centre height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Dsdpfxsvphv Te Alyjkl Distance between centres: 750 mm Spindle: Spindle nose DIN 55027 / DIN ISO 702-3: size 5 Spindle bore: 40.5 mm Spindle bearing diameter (front): 70 mm Max. spindle torque: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed drives Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: Also specified as 0–20 mm/rev) Cross: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Cross: 3,000 N Max. rapid traverse speed longitudinal/cross: 8 / 4 m/min (Note: Also specified as 10 / 7.5 / 5 / 3.5 m/min) Thread cutting: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 TPI Tailstock / quill: Quill diameter: 50 mm Quill travel: 110 mm Morse taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Stav: použitý, Rok výroby: 1999, Dĺžka sane: 3800 mm Šírka rezu na pozdĺžnom pravítku: 1500 mm Šírka rezu na priečnom pravítku: 3200 mm Hĺbka rezu: 140 mm Predrývač: nie Nastavenie výšky pílového kotúča: elektrické Nastavenie naklápania pílového kotúča: elektrické Nastavovanie pozdĺžneho pravítka: elektrické / s polohovacou kontrolou Zobrazovanie uhla pílového kotúča: digitálne Zobrazovanie výšky rezu: - Zobrazovanie pozdĺžneho pravítka: digitálne Zobrazovanie priečneho pravítka: stupnica Dkedpfovxi Ddjx Alysl Priemer pílového kotúča: 400 mm Počet otáčok: 3 Výkon motora: 7,5 kW Motorová brzda: áno, automatická Odsávací prípoj: 80 mm a 120 mm Dĺžka stroja: 3900 mm Šírka stroja: 2200 mm Hmotnosť: 1000 kg