Termomechanický analyzátor

TA Instruments TMA Q400

Rok výroby: 2019, stav: takmer ako nový (použitý), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Condition: As new, hardly used - Documentation available (both electronic and hard copy) - Includes pallet with spare parts TECHNICAL DATA Model: RWO 360/400-1150 Maximum chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C under vacuum Control accuracy: ± 2 K Temperature uniformity: ± 6 K within the range of 600 °C to 1150 °C after thermal stabilization Godpfx Ajiryyaeamotw Control voltage: 230 VAC / 24 VDC Furnace working area: 360 x 400 mm Loading capacity: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Ultimate vacuum (cold, clean & dry oven): < 5 * 10-5 mbar Installation footprint: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume responsibility for the correctness, completeness, or timeliness of the above information.

Stav: veľmi dobrý (použitý), Rok výroby: 2020, Stroje na výrobu lekárskych rúšok typu IIR, FFP2. Cena za kus. Gjdsr Iydyopfx Aamjtw

Stav: nový, *Technická štandardná špecifikácia: Typ zariadenia: 6/150 Výhrevný výkon: 6 kW Chladiaci výkon: 45 kW (Údaje o výkone pri 80 °C teplote predného okruhu a 15 °C teplote chladiacej vody s tlakovým rozdielom medzi vstupom a výstupom chladiacej vody minimálne 2 bar) Médiom: voda do 150 °C Maximálny externý objem: 9 l pri 150 °C *Funkčné vybavenie: - Chladenie a plnenie ovládané elektromagnetickým ventilom - Automatické plnenie cez chladiacu vodu - Kontrola hladiny cez magnetický plavákový spínač - Filter nečistôt v spätnom toku cirkulačného a chladivového vedenia - Reverzný režim pre prevádzku „leak stop“ (použiteľný do systémovej uzatváracej teploty) - Guľový ventil vo výstupe a spätnom toku - Automatické uzavretie systému v závislosti od teploty - Monitorovanie doby plnenia a Aquatimer - Nastaviteľný dobeh čerpadla - Nastaviteľný teplotný alarm - Voliteľné: prepojovací kábel - Riadiaca a regulačná jednotka SBCmini s relé pre súhrnný alarm, 230 V, pripojená na zadnej strane regulátora na svorku - Riadenie kúrenia SSR - Rozvodná skriňa IP54 - Rozhranie 20 mA TTY; rozloženie pinov Arburg Gsdefnvwqopfx Aamstw - Cekon zástrčka 16 A - Koróziivzdorné komponenty (nerez, mosadz) - Zariadenie montované na kolieskach, dve z nich otočné s brzdou - Dodatočná teplotná poistka pre bezpečné vypnutie kúrenia na predchrániči kúrenia - Bypass medzi výstupom a spätným tokom so zníženým prierezom *Čerpadlo: Typ: Y2051 Max. prietok: 27 l/min Max. tlak: 4,5 bar Výkon motora: 0,5 kW Typ: ponorné / periférne obežné koliesko *Rozmery / Hmotnosti / Farby Rozmery D/Š/V: 600 mm x 240 mm x 493 mm (bez pripojení) Hmotnosť: cca 43 kg Farba: kryt: RAL 7035 svetlosivá predné dvierka: RAL 5015 nebeská modrá *Pripojenia: Cirkulačné médium: závit G1/2“ Chladiaca voda: závit G3/8“ *Toto zariadenie je v súlade s európskymi smernicami. Ostatné smernice a normy sú platné len v prípade, ak sú uvedené v potvrdení objednávky. Táto technická špecifikácia zodpovedá štandardnej výbave; od štandardu odlišné požiadavky zákazníka sú uvedené v ponuke alebo potvrdení objednávky.

Rok výroby: 2015, stav: pripravené na použitie (použité), K dispozícii je obehová komorová pec Nabertherm. Prípojný výkon: 30kW, max. teplota: 650°C, objem: 500l, doba nahrievania: cca 60min, vnútorné rozmery X/Y/Z: 750mm/1000mm/750mm. Rozmery stroja: cca 1300mm/1900mm/1850mm, hmotnosť: cca 750kg. Dokumentácia k dispozícii. Možná obhliadka na mieste. Gjdoxrf Iujpfx Aamotw

Rok výroby: 2023, stav: pripravené na použitie (použité), A brand-new, unused Tanabe rotary kiln is available, still in its original packaging and complete with all necessary accessories. 1) Rotary kiln: Length: 17m, height: 2400mm (+400mm/600mm elevation), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (up to 900°C possible with retort replacement and heating upgrade), feed: screw feeder, rotary drum speed control: 0.5 to 2 rpm, weight: approx. 23,500kg, includes separate combustion air preheater. 2) Rotary cooler: Length: 10,600mm, height: 1600mm (+400mm/600mm elevation), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling method: water cooling with closed circuit, speed control: 1.1 to 4.3 rpm, discharge: rotary valve, weight: approx. 8,200kg. Gtjdpfxjulkumj Aamew 3) Exhaust air filter unit including extraction fan, HEPA filter, and dust collection bin with a temperature tolerance of up to 250°C. Control system: Siemens process control for local operation, 3x HMIs, several control panels, and switch cabinets. Includes various accessories such as spare parts, transport aids, and additional smaller components. The complete system is factory-new and still in its original packaging. Photos were taken at the manufacturer’s site. Full documentation is available. On-site inspection is possible.

Stav: veľmi dobrý (použitý), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: Touch Panel All control and operation commands can be triggered by simply touching the function icons on the “Touch Panel” control unit. Leveling Feet To compensate for floor unevenness and to ensure adequate ventilation of the machine section, the test chamber is equipped with adjustable feet. Ports The test chamber is equipped with ports on both the right and left sides. These allow measurement cables and test equipment to be routed into the test chamber. Standard fitted ports: R1: DN 125 mm L1: DN 85 mm Volume: 335 liters Test Chamber Dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Data for Temperature Tests: Minimum temperature: –72°C Maximum temperature: +180°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Godpjv Sr Hzofx Aamotw Spatial temperature homogeneity: ± 0.5 to ± 1.5 K Temperature change rate, cooling: 3 K/min Temperature change rate, heating: 3 K/min Data for Climate Tests: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% rH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature homogeneity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3% rH Operational Data: Test chamber lighting: Halogen lamp 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power: 4.9 kW Customer side fuse: 16 A slow-blow Refrigerant: R-452A/R23 Weight: approx. 585 kg Important information for you as a buyer: The following steps are proactively carried out on all chambers offered by us: 1. Function check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Stav: použitý, Micro balance, laboratory balance, precision balance, analytical balance, scale, micro balance METTLER TOLEDO Model XS3DU Serial No.: 1129453969 Article No.: 18.11.2.1518.756-1 Year of manufacture: 2008 Functions: Weighing, Statistics, Formulation, Density, Percent Weighing, Piece Counting Maximum capacity: 3.1 g Readability: 0.01 mg Tare range (from ... to): 0 – 3.1 g Maximum fine range capacity: 800 mg Fine range readability: 0.001 mg Repeatability (at nominal load): 6 µg (3 g) Repeatability in fine range (at nominal load): 0.8 µg (0.2 g) Linearity deviation: 10 µg (0.5 g) Corner load deviation (test load): 4 µg (1 g) Sensitivity deviation (test weight): 45 µg (3 g) Sensitivity temperature drift: 0.0001 %/°C Sensitivity stability: 0.0001 %/year Repeatability (at low load): 3 µg (0.2 g) Fine range repeatability (at low load): 0.2 g (0.5 µg) Linearity deviation: 3 µg (3 g) Corner load deviation (test load): 1.2 µg Sensitivity deviation (test weight): 9 µg (3 g) Minimum sample weight (according to USP): 6 mg Minimum sample weight (according to USP) in fine range: 1 mg Minimum sample weight (U = 1 %, k = 2): 0.6 mg Minimum sample weight (U = 1 %, k = 2) in fine range: 0.1 mg Stabilization time: 6 s Stabilization time in fine range: 10 s Interface update rate: 23 1/s Draft shield diameter: 68 mm Usable height of draft shield: 55 mm Gsdpfxjwrtbxj Aamstw Weighing pan diameter: 25 mm - LCD touchscreen - RS232C interface - Printer type RS-P42 - Tare function Power adapter: Primary: 100 - 240 V AC, 50/60 Hz; Secondary: 12 V DC, 2.5 A Terminal/Display unit dimensions (L x W x H): 285 x 195 x 80 mm Weigh cell dimensions (L x W x H): 288 x 128 x 114 mm Printer dimensions (L x W x H): 210 x 150 x 90 mm Total weight: approx. 7 kg Good condition

Stav: použitý, Funkcionalita: plne funkčný, Olympus IX70-S8F Inverzný fluorescenčný mikroskop s fázovým kontrastom. Tento mikroskop Olympus IX70 je vybavený možnosťou fázového kontrastu, DIC (diferenčný interferenčný kontrast) a fluorescencie. Dodáva sa s ergonomickou naklápateľnou binokulárnou hlavicou a okulármi s 10-násobným zväčšením. Mikroskop má predný a bočný fotoport na pripojenie kamery. Kondenzor s numerickou apertúrou 0,5 obsahuje DIC hranoly DP10 a DP20 a inštalované fázové anuly Ph1 a PhC spolu s polarizátorom IX-LWPO. Päťpolohový fluorescenčný revolver obsahuje fluorescenčné filtre WIBA a NU. Súčasťou vybavenia je aj IX-AN analyzátor a DIC hranol U-DICT. Mikroskop má zabudovaný menič zväčšenia 1,0x / 1,5x. Gsdpfxeuax T Sj Aametw V dobrom funkčnom stave. Pozrite si aj naše ďalšie ponuky.

Stav: použitý, Turbomolekulárna pumpa Výrobca: Pfeiffer Typ: TPU 2000S Gtjdpfx Aaedcpbkjmow Stav: Použitý Číslo: PMP01141/9007 Záruka na 12 mesiacov je možná.

Rok výroby: 2000, stav: pripravené na použitie (použité), A complete Hosokawa mill for processing polyester resin lumps is available. Full plant specifications: Feed material: Polyester resin; maximum feed particle size (dry): 800 mm / 600 mm / 20–30 mm; final fineness: below 1.5 mm; round hole diameter: 15 mm; plant throughput: approx. 3,000 kg/h; analysis method: Alpine air jet sieve 200 LS-N. 1) Alpine single-shaft shredder type A 1500P; feed hopper opening: 2,030 mm / 1,440 mm; feed hopper volume: 2.5 m³; working width: 1,500 mm; cutter circle: 300 mm; rotor speed: 100 rpm; motor power: 37 kW; machine dimensions (LxWxH): approx. 2,100 mm / 2,200 mm / 2,300 mm; weight: approx. 3,500 kg. 2) Automatic dedusting filter AE 48 L; filter area: 42 m²; filter bags: needle felt 550 g/m². 3) Alpine Compact-Line granulator 45/100 CL; cutting tool rows: 4; min. sieve opening: 3 mm; required power: 55 kW. Includes extraction system, conveyor system, and accessories/peripheral equipment. Documentation available. An on-site inspection is possible. Godpfx Aasvdu N Ajmotw