Brúska na ostrenie

WEINIG OptiControl 970 PowerLock

Stav: použitý, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3300 kg Dimensions (L/W/H): 2600x920x1890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sander + disk unit from above/below Manufacturer's description: ----- Double-sided four-belt single-wood sanding machine for sanding solid wood such as window frames, etc. Highly robust premium design with innovative details. Suitable for continuous heavy-duty use, even with high material removal rates. - Successive sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush (see special equipment below) - Direct-driven sanding rollers for slip-free power transmission - Maintenance- and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional accuracy - External cooling of the sanding zones for cooler sanding and longer belt service life - Forced pneumatic-controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine dust extraction at the tension rollers - Integrated brushing and finishing unit with large sanding dust extraction - Motorized sanding thickness adjustment via precision threaded spindles and large linear ball bearing sets on hardened and ground precision shafts, dust and dirt protected - Adjustment of material removal on the underside via precision threaded spindle with scale ring (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension force - Quick sanding belt changes with pneumatic belt relaxation in seconds - Possibility to adjust belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for workpieces that are too thick - Workpiece transport via calibrated, slip- and adhesion-proof transport belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and even workpiece transport - Feed gear motor with stepless speed adjustment 4-20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s Dodpfx Adsvu Hgbs Nskk - Sanding belt length: 1800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2-180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm at 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2740 mm): 2600 mm - Length with control panel (with soft disc 3035 mm): 2985 mm - Width: 880 mm - Height: 1910 mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-certified Equipped with the following options: - 4-belt sanding belt air blast directly via nozzles at the radii ...

Stav: dobrý (použitý), Rok výroby: 1983, Funkcionalita: plne funkčný, Brúska na náradie s mokrým brúsením. Technické údaje podľa fotografie. S chladiacim čerpadlom a deliacim zariadením. Dkjdpfx Adjup U R To Nsk

Stav: veľmi dobrý (použitý), SICAR Forte 400 hrúbkovacia frézka Pracovná šírka: 400 mm Dkodet Rp Hxepfx Ad Njk Výška hobľovania: 300 mm Vreteno s tradičnými nožmi Štvornožový valec Otáčky vretena: 5200 ot./min Elektrické zdvíhanie a spúšťanie pracovného stola Hlavný motor: 3 kW 3 rýchlosti posuvu CE certifikát

Stav: veľmi dobrý (použitý), HM pílová automatická brúsička bokov (bokov brúska) s dvojitou brúsnou kotúčou GRIFO Dkjdpfx Ashakilsd Nok

Stav: použitý, Antická šijacia strojová zošívačka Gebr. Brehmer 39 Sériové číslo: 2742 Krásne spracovaná antická strojová zošívačka na niť Dksdpswtw Dgjfx Ad Njk Online videoinspekcia cez WhatsApp, MS Zoom, Telegram Na sklade v Emskirchen/Nürnberg – okamžite k dispozícii – možnosť otestovania

Stav: použitý, Rok výroby: 2005, Funkcionalita: plne funkčný, doraz dĺžky: 3 200 mm, priemer nástroja: 400 mm, priemer vretena: 50 mm, zdvih vretena: 640 mm, maximálna rýchlosť vretena: 3 000 ot./min, dĺžka frézovacieho vretena: 320 mm, priemer pílového kotúča: 400 mm, typ nastavenia výšky: elektrický, typ vstupného prúdu: Klimatizácia, pracovná výška: 130 mm, pracovná šírka: 200 mm, SCM Windor 60/100 – Angle Machining Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the Plant The production line in question is a window and door manufacturing line, model Windor 60/100, produced by SCM Group in 2005. This is a CNC-controlled angle machining centre for the industrial processing of frame and sash components. The facility is designed for series production and enables precise, repeatable machining through integrated process steps. 2. Main Components of the Plant 2.1 Angle Machining Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle system. Machining is performed on a tenoning side and a profiling side, arranged at right angles to each other. The centre combines multiple operations such as milling, drilling, grooving, rebating, and tenoning into a continuous CNC-controlled process. Key features: * CNC multi-sided machining * Multiple milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the line and serves the precise execution of boreholes for joints and fittings. Machining is CNC-controlled, equipped with both vertical and horizontal drilling units. 2.3 Profiler Centre Dkedpjx Nqqxofx Ad Nok The profiler centre is designed for profile-forming milling work and comprises two machining sides: Right side: * Lifting spindle with height adjustment * For variable profile and contour machining Left side: * 24-position tool changer * Automatic tool change to minimise set-up times * Suitable for complex profile milling 2.4 Löwer Surface Sanding Machine A surface sanding machine from the manufacturer Löwer is integrated into the production line. The machine is used exclusively for surface sanding and serves to improve the surface quality of processed components. 3. Control, Operation and Safety The system is equipped with CNC control, which manages all machining operations, tool changes, as well as feed and spindle movements. Operation is conducted semi- or fully-automatically by trained technical personnel. The safety equipment complies with the state of the art at the time of installation (year of manufacture 2005) and specifically includes: * Mechanical safety devices and enclosures * Emergency stop equipment * Safety interlocks on moving machine components 4. Optional Extension: SCM Topset XL Planing Machine (10-spindle) To expand the existing machine park, the installation of a planing machine, type SCM Topset XL with 10 spindles, is planned. The machine will be operated as a standalone machining station at a separate location within the production hall and will not be directly integrated into the Windor plant's CNC control. The equipment is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07.01.2026

Stav: použitý, Rok výroby: 2021, Number of spindles: 5 pcs. Working width: 250 mm Planing height: 160 mm Length of surfacing table: 2500 mm Feed motor: 4 kW Feed speed: 6–24 m/min Control system: K2 Basic 7" Touch KUPER SWT XL-5 AUTOMATIC PLANING AND MOULDING MACHINE --- AS NEW, DEMONSTRATION UNIT! - 5 spindles: bottom, right, left, top, bottom - Speed: frequency-controlled 4,000 – 6,000 rpm; spindle 4,500 to 8,000 rpm - Width and height adjustable via motor: left spindle radial upper spindle axial - Feed beam motorised positioning - Additional motorised adjustments: right spindle radial and axial left spindle axial - Working width: 250 mm DETAILED TECHNICAL DATA --- Working width (with tool diameter 125–163 mm): 15 – 230 mm Working height (with tool diameter 125 mm): 10 – 160 mm (tool diameter up to 163 mm): 10 – 160 mm Minimum workpiece length: Single piece: min. 800 mm Piece by piece: min. 300 mm Processing of workpieces depends on the following operating parameters: Material, wood moisture, tools, chip removal diameter and feed speed. If necessary, adjustment of operating parameters is required. SPINDLE CONFIGURATION --- bottom, right, left, top, bottom 1st spindle: HORIZONTAL, BOTTOM --- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Diameter: 40 mm Spindle length: 250 mm Usable length for tools: spindle length minus approx. 6 mm Speed, frequency-controlled: 4000–6000 rpm Tool diameter: 125–160 mm Rabbetting device: diameter difference 20–25 mm to planing head Important: Machine cannot be operated without rabbet cutter Extraction port D = 125 mm Tool clamping system: Quick-clamping nut "Pro-Lock" 2nd spindle: VERTICAL, RIGHT --- Siemens IE3 motor with inverter brake, 5.5 kW (7.5 HP) Dksdpfxswgwmnj Ad Njk Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Axial adjustment 60 mm Table plate adjustable to tool radius Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 3rd spindle: VERTICAL, LEFT --- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 165 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Axial adjustment: 60 mm Standard profile depth: 20 mm Table plate adjustable to tool radius Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 4th spindle: HORIZONTAL, TOP --- Siemens IE3 motor with inverter brake, 7.5 kW (10 HP) Diameter: 40 mm Spindle length: 235 mm Usable tool length minus spindle length approx. 6 mm Speed, frequency-controlled: 4000 – 6000 rpm Tool diameter: 112 – 200 mm Pressure shoe: pneumatic, dynamically adjustable via linear guides Standard profile depth: 20 mm Extraction port D = 125 mm Extraction: individually adjustable chip deflector Tool clamping system: Quick-clamping nut "Pro-Lock" 5th spindle: HORIZONTAL, BOTTOM --- (Specification truncated; provide remaining spindle details as needed)

Stav: použitý, Počet brúsnych jednotiek: 4 ks Brúsna šírka: 190 mm Maximálna brúsna výška: 4–180 mm Hmotnosť: 4200 kg Hess Expert 4-pásová jednostranná drevoobrusovačka Ø Spodné/horné brúsenie Ø Každá so 2 posunutými brúsnymi jednotkami (hore a dole) Ø Brúsne jednotky (hore a dole) zapojené za sebou podľa tvarovacieho princípu Ø Predbrúsenie hrubým zrnom (kalibrácia) Ø Dočisťovanie jemným zrnom (finishing) Ø Centrálne motoricky nastaviteľná výška spodných brúsnych jednotiek Ø Centrálne motoricky a synchronne nastaviteľná výška celej hornej brúsnej a kefovej jednotky vrátane horných transportných jednotiek Ø Oslovené využitie brúsneho pásu (počas brúsenia) Ø Maximálny prenos sily cez 5,5 kW motory a veľkorozmerné hnacie bubny Ø Oxid-keramická brúsna platňa pre: - presný povrchový profil - žiadne nastavovacie práce - trvalá rozmerová presnosť - úplne bezúdržbová a bez opotrebenia Základná konštrukcia: Masívna, ťažká zváraná konštrukcia z hrubostenných obdĺžnikových profilov s dodatočnými staticky dimenzovanými výstuhami pre optimálne tlmenie vibrácií. Posunuté brúsne jednotky s veľkými hnacími bubnami pre bežanie pásu bez preklzu. Dvojbodové odsávanie na priamy a rozptýlený prach s tesniacimi kefami a integrovaným ofukovaním brúsneho pásu pre predĺženie životnosti pásov. Brúsne jednotky v ťažkej ocelovej platňovej konštrukcii ako základ pre tlmený, stabilný chod pásu. Absolútne bezvôľové vedenia ako guľôčkové lineárne jednotky z tvrdených a brúsených hriadeľov. Výškové nastavenie brúsnych jednotiek po tvrdených a brúsených špeciálnych lineárnych vedeniach a predpätých vozíkoch. Trvalá presnosť vďaka prachotesným a nečistototesným guľôčkovým lineárnym jednotkám a vozíkom. Veľkorozmerné predbrúsne valce ako kontaktné valce. Kontaktné valce a brúsne platne v optimálnom pomere k záťaži brúsneho pásu. Veľké hnacie bubny garantujú plný prenos 5,5 kW motorového výkonu na brúsny pás – tým bez preklzu, stabilný chod a optimálne odvádzanie tepla. Umožňuje maximálne úbery. Automatické vypnutie stroja pri pretrhnutí pásu. Optická signalizácia na ovládacom pulte a blikajúcim svetlom na stroji. Brúsne platne pre finishing úplne bezúdržbové a bez opotrebenia z oxid-keramiky s optimálnym odvodom tepla. Napínanie brúsneho pásu pomocou primerane dimenzovaných tlakových pružín. Uvoľnenie pásu pre výmenu pásov prostredníctvom pneumatického zariadenia na citlivé, bez deformácie nasadenie nových pásov. Horná brúsna jednotka a kefová jednotka centrálne motoricky nastaviteľné s digitálnym zobrazením na ovládacom pulte na nastavenie hrúbky brúsenia. Dkedpst Tqy Esfx Ad Nok Kefovacia a dokončovacia jednotka pre lepšiu povrchovú úpravu je integrovaná v základnom stroji. Dve špeciálne kefové valce s priemerom 150 mm, nad sebou, s rovnakým smerom otáčania ako posuv. Samostatné výškové nastavenie kefových valcov na presných lineárnych vedeniach na kompenzáciu opotrebovania. Dodatočný transportný valec na vyvedenie alebo ďalší transport obrobku zo stroja, prepojený s transportným pásom. Drevené vedenie v oblasti vstupu pre tvrdé, obojstranné ...

Stav: použitý, Rok výroby: 2009, celková šírka: 1 800 mm, celková výška: 1 650 mm, Empty weight: 2,400 kg Dimensions (L x W x H): 350 x 180 x 165 cm Motor configuration: Bottom, 5.5 kW Right, 5.5 kW Left, 5.5 kW Top, 7.5 kW Bottom, no motor, but optional spindle - Year of manufacture: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: AA2/001125 - Number of spindles [pcs.]: 4 - └ Spindle 1: - Spindle diameter [mm]: 40 - └ Spindle 2: - Spindle diameter [mm]: 40 - └ Spindle 3: - Spindle diameter [mm]: 40 - └ Spindle 4: - Spindle diameter [mm]: 40 - Min. planing width [mm]: 25 Dkjdownh Irjpfx Ad Nok - Max. planing width [mm]: 240 - Min. planing height [mm]: 6 - Max. planing height [mm]: 120 - Feed table length [mm]: 2000 - Feed roller diameter [mm]: 140 - Feed motor [kW]: 2.2 - Extraction nozzle diameter [mm]: 120 - Voltage [V]: 400 - Power consumption [A]: 58 - Fuse [A]: 63 - Transport dimensions: 3500mm x 1800mm x 1650mm (L x W x H) - Transport weight [kg]: 2400kg - Transport packages [pcs.]: 1 Financial information VAT: The stated price is net of VAT VAT/margin scheme: VAT can be deducted for businesses Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Stav: dobrý (použitý), číslo stroja/vozidla: 2029, Tlačiarenský stroj Boston Tiegel A4+ Hohner Tiegel, elektrický/s motorom, výrobné číslo 2029, v dobrom stave, ihneď k dispozícii. K dispozícii sú 2 stroje. V prípade záujmu Vás radi informujeme aj o ďalších strojoch v našej ponuke. Ste srdečne vítaní prísť si stroj pozrieť po predchádzajúcej dohode. Dodpfx Aexc Eucod Nekk