Okenný systém

WEINIG Unicontrol 6

Stav: použitý, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 Used Weinig Unicontrol 6 Window Production Line ----- For sale on behalf of customer Manufacturer's description: For the production of single parts, assemblies, and small series. Spindle Arrangement: One crosscut saw, one single-sided tenoning and slotting spindle, one right-hand profiling spindle, one tenoning-slotting spindle and profiling spindle suitable for mounting multiple tools one above the other, equipped with pneumatic spindle movement. Slotting table with motor-driven table movement and automatic transfer into the continuous, chainless rubber roller drive feed of the profiling unit, feed height adjustment manual. Workpiece clamping via 2 pneumatic clamping cylinders. Length stop with scale and magnifier for frame or sash external dimension. Tool position control (longitudinal and cross machining) via selector switch from the control panel. Ksdpfx Aow I Ea Djgusnc Technical Data ----- Crosscut saw ----- Number of tools: 1 Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor: 3 kW Tenoning and slotting spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 320 mm Motor: 11 kW Profiling spindle ----- Number of tools: 3/4 pcs. for wood thicknesses IV 68 - IV 92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Tool clamping length: 320 mm Max. tool diameter: 232 mm Motor: 11 kW Special Equipment: Synchronous Spindle ----- Pneumatically actuated forward-backward movement for tear-free re-milling of window sashes, frames, and doors. Spindle diameter: 50 mm, 4 kW Tool clamping length: 120 mm, min. tool diameter 112-140 mm, Max. tool diameter: 232 mm, Spindle speed: 6,000 rpm Motor upgrade for synchronous spindle from 4 kW to 7.5 kW Screen control for 99 window types, 1 type can contain up to 8 different parts with 2 end profiles each and 2 longitudinal profiles. Manufacturing options: single parts, double parts, per frame, serial production, re-milling. Data entry via keyboard with integrated operator guidance and fault diagnosis. 1 Grooving spindle from above ----- Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm, with feather key 10 x 4 mm Mounting length: 13 mm Clamping length: 40 mm Axial indexing: 2 positions Radial indexing: 2 positions Max. tool diameter: 130 mm Motor upgrade for grooving spindle from 2.2 kW to 3 kW 1 Hardware milling unit, right side: ----- For routing the hardware groove in the re-milling operation or for grooving in the longitudinal profile. Pneumatic horizontal movement with selector switch in the control panel. Motor power: 2.2 kW Speed: 6,000 rpm Spindle diameter: 40 mm Clamping height: 125 mm Tool swing diameter: min. 140 mm, max. 180 mm Home position below table level: 10 mm Special design hardware milling head: Clamping length: 150 mm Axial stroke: 80 mm, 3 positions 3 tools Radial indexing: 2 positions Motor upgrade for hardware milling spindle from 2.2 kW to 3 kW Hardware milling spindle for 230 mm tool diameter at and above table height Electrical height adjustment of the feed with selector switch in the control panel for 2 wood dimensions, incl...

Stav: použitý, Použitá rozvodná skriňa značky Weinig, typ Unicontrol 6, vhodná ako zdroj náhradných dielov alebo na novú výstavbu rozvádzača. Obsah okrem iného: Kodjt Na Drepfx Aguenc - Brzdová jednotka Hilger & Kern - Transformátor Rathgeber, typ ET 1000.

Stav: použitý, Slitting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Summary ----- 1. Cross-cut saw ----- Cross-cut saw, pneumatic, with 8-position revolver stop Spindle speed: 2800 rpm Spindle diameter: 40 mm Maximum tool diameter: 350 mm Motor power: 3 kW Laser guide for recognizing the saw section Manual length stop 4100 mm 1. Tenon and slitting spindle ----- Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3500 rpm Spindle diameter: 50 mm Maximum tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle - synchronous spindle (climb and counter-climb) ----- Position: vertical, right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool circle: 232 mm Motor power: 7.5 kW Kjdpfsw Im Hxjx Agujnc 2. Profiling spindle ----- Position: vertical, right Number of tools: 3 / 4 pcs. Tool clamping length: 320 mm Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6000 rpm Spindle diameter: 50 mm Maximum tool circle: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical, right Number of tools: 3 pcs. Spindle speed: 6000 rpm Spindle diameter: 40 mm Maximum tool circle: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bead saw, horizontal-vertical indexed ----- Position: horizontal top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial feed: 2 positions Radial feed: 2 positions Further features ----- Rebating unit for tear-free rebating Double-part package Return conveyor for single-operator use at working height: Swivel tray Screen control, 99 programs Angled window fitting unit Electronic angle display for angled windows INCLUDES OPPOLD window tooling, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Tools are sold in the current condition, quantity, and with accessories as currently available. Note regarding window cuts, tooling drawings, tool system lists: Engelfried GmbH does not provide a guarantee that the tools actually supplied match the stated and drawn systems. (Specifications according to manufacturer - without guarantee!)

Stav: použitý, Slotting spindle 1 pc. Number of milling units 5 pcs. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and fully checked before delivery ----- Technical Data Summary (Any additionally included accessories upon request) Pos. 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment pneumatically controlled in 8 positions, e.g. for top edge rounding > Laser guide light for identifying the saw section Pos. 2: Horizontal rounding unit, below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment mechanically coupled with cross-cut saw > Radial adjustment pneumatically controlled on/off NC-controlled length stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and slotting spindle ----- > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 3,500 rpm > Max. tool swing diameter: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 4: 1st profiling spindle (climb and conventional milling) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, continuously adjustable, NC > Tool clamping length: 320 mm > Spindle stroke, vertical: variable 254 mm, continuously adjustable, NC-controlled > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash bar guide consisting of: Guide rail in the stop (area of the climb milling spindle), Sash support bar from above in the area of the vertical profiling unit on the right and profiling spindle. Pos. 6: Horizontal profiling unit, above ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 9,000 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions > Radial adjustment: 125 mm, 8 positions Pos. 7: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions > Radial adjustment: 110 mm, 8-position turret > Spindle speed: 5,850 rpm Knodpfx Agjvu Hghouoc > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Pos. 8: Profiling/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > ...

Stav: použitý, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus #2764 Weinig Unicontrol 6 with NC spindles Kjdevu Hfqjpfx Agujnc ----- The machine will be cleaned and thoroughly inspected before delivery. Summary of Technical Data (Please inquire for any additionally included accessories.) Pos. 1: Cross-cut saw ----- > Electronic cross-cut saw, continuously adjustable horizontally > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for cut detection > NC length stop, mounted on slotting table included Positioning of the cross-cut saw integrated in the control system. > Length: 3,500 mm Pos. 2: Tenoning and slotting spindle ----- > Number of tools: variable, adjustment stepless via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment via NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, stepless adjustment 254 mm via NC axis > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool swing diameter: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Bar guide consisting of: guide rail in the stop (area of climb-cut spindle), bar support bar from above in the area of vertical profiling unit (right) and profiling spindle. Pos. 5: Horizontal top profiling milling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing diameter: 130 mm > Axial adjustment: 30 mm, 8 positions via pneumatic revolver > Radial adjustment: 125 mm, 8 positions via pneumatic revolver Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic revolver > Radial adjustment: 100 mm, 8 positions via pneumatic revolver > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing diameter: 210 mm > Motor power: 3.0 kW Further features ----- > Online-capable > Rebating unit for tear-free rebate cutting > Double part package > Return device for single-operator use: pivoting belt > Screen control > Tilt window facility > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original images available yet. Photos show an identical machine from our archive ----- Price for the above machine on request! ----- Option at extra charge: EUR 6,500.00 Note...