Silo zariadenia kúpiť použité (15)

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System type: Temperature control unit for washing and elution solutions Year of manufacture: 2020 Serial number: 1003563 Device number: KK6752 Design: Stainless steel skid, pharmaceutical construction LEP 2.3 KK6752 Package 7 Technical data Construction: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contacting: Stainless steel 1.4435 / 1.4404 Non-product-contacting: Stainless steel 1.4301 Piping system: Orbital welding (pharmaceutical grade) Fully welded design As-built isometry available Pressure data: Leak test with compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and control technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Ljdoyl Ipcjpfx Aa Hsri Level measurement (limit) Flow monitoring Position feedback Motor control On/off valves, pneumatic Pressure sensor range: 0–10 bar Electrical connection: Control air: 6 bar Automation-ready (all control points fully documented) Main components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Several hygienic control and shut-off valves Integrated instrumentation units Cooling medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Design: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Areas of use: Biotechnology Plasma fractionation GMP production facilities Construction / Design Welded stainless steel frame Low-vibration pump mounting Hygienic piping Fully compliant with P&ID Clear separation of product / non-product areas Service and maintenance accessibility tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram review completed Layout drawing review completed Condition Year built: 2020 Industrial and pharmaceutical-grade construction New – original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout review P&ID review Leak test Sensor calibration Maintenance and accessibility check EN10204 mill certificate Material lists (LBM) As-built isometry Component lists (equipment & automation points) Special features Pharma GMP-compliant design Complete validation documentation Seamless traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, Výbava: dokumentácia / manuál, Výrobca: BRINOX Typ: LEP 2.3 – temperačná jednotka pre roztok pre umývanie Rok výroby: 2020 Sériové číslo: 1003561 Tag číslo: MR-INH-VPR61-KK6751 Evidenčné číslo zariadenia: 20022779 Lokalita: Nemecko Stav: Nové, nepoužité, originálne zabalené Technické údaje Lodpfx Ajyl Ib Eja Heri Typ zariadenia: temperačná jednotka pre roztok pre umývanie (temperovací skid) Konštrukcia: Kompaktná, predmontovaná skid-jednotka v nerezovom ráme Materiál rámu: nerezová oceľ Izolácia: Úplne izolované potrubia a komponenty Čerpadlá: Dve obehové čerpadlá s elektromotorom Telo čerpadla z nerezovej ocele Inline vyhotovenie Tepelné výmenníky: Integrovaný výmenník tepla z nerezovej ocele Rúrkový alebo plášťový vyhotovenie Armatúry: Niekoľko guľových ventilov GEMÜ Nerezové ventily Pneumaticky ovládané regulačné ventily Bezpečnostné ventily Meracia technika: Tlakový prevodník Manometer Meracie miesta teploty Integrovaný merací systém prietoku Elektroinštalácia: Integrovaný rozvádzač alebo svorkovnicová skriňa Plne zapojené a pripravené na pripojenie Komponenty v priemyselnom štandarde Potrubia: Procesné potrubia z nerezovej ocele Úplne izolované Prírubové a clamp spoje Transport: Možnosť manipulácie vysokozdvižným vozíkom aj žeriavom Masívny základový rám z nerezovej ocele Použitie Temperačná jednotka slúži na riadené temperovanie pre umývací roztok vo farmaceutických alebo chemických procesoch. Vhodné pre CIP a umývacie procesy, farmaceutické výrobné linky, chemické procesné zariadenia, ako aj pre teplotne riadené cirkulačné systémy médií. Konštrukcia Kompaktné, modulárne skid vyhotovenie Predmontované a pripravené na pripojenie Vysokokvalitné spracovanie nerezu Priemyselné kvalitné komponenty, vrátane armatúr GEMÜ Servisne prívetivý dizajn Stav Nové zariadenie Nikdy nebolo v prevádzke Originálne zabalené Priamo z projektovej dodávky výrobcu Ihneď k dispozícii FAT a dokumentácia K dispozícii kompletná technická dokumentácia Projektové podklady priložené K dispozícii výkresy P&ID k dispozícii Zoznam komponentov Prevádzkový manuál Špeciálne vlastnosti Plne izolované procesné potrubia Vysokokvalitné nerezové prevedenie Priemyselné značkové komponenty Ideálne pre nové projekty alebo ako náhradná / redundantná jednotka Možnosť okamžitej integrácie

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, Machine designation BRINOX Process Plant / CIP Skid Type CS6700 (CS6723) GMP CIP Process Skid 1.4435 Manufacturer BRINOX Process Systems Year of manufacture 2020 Technical Data Constructed as a stainless steel process skid in hygienic design. Conductivity measurement 1–500 µS/cm, analog signal (AI), hygienic connection DN 50. Flow measurement 0–18,000 kg/h, analog signal (AI), connection DN 25, sterile flange DIN 11864-2A. Pressure measurement points −1 to 9 bar and −1 to 15 bar, analog signal (AI), hygienic connections DN 50 or ½", incl. DIN EN ISO 228. Temperature measurement points −50 °C to +200 °C, analog signal (AI), connection DN 32, welded according to DIN 11866/A. Limit level sensors, digital (DI), hygienic connection DN 50. Multiple position feedbacks with IO-Link / digital. Pneumatically actuated on/off valves (DO) in hygienic stainless steel design. Product-contact materials compliant with EN 1.4435 / 1.4404 (AISI 316L). Documented surface roughness of product-contacting surfaces Ra approx. 0.3–0.4 µm. Application Hygienic CIP and process plant for pharmaceutical and biotechnological applications. Suitable for the cleaning of process lines and tanks under GMP conditions. Construction Lredpfx Aasyl H Svj Hoi Welded stainless steel skid with orbitally welded piping. Hygienic clamp and sterile connections. Fully instrumented with flow, pressure, temperature, and conductivity measurement. Pneumatic valve technology with digital feedback. Components from renowned manufacturers such as Endress+Hauser, Gemü, Samson, SICK, etc. Clean, GMP-compliant execution. Condition New. In original packaging. Unused. Never installed or commissioned. FAT / Documentation Status Fully documented Factory Acceptance Test conducted. Layout drawing verification documented. Maintenance and calibration accessibility verification documented. Surface roughness test documented. Leak test documented. Sensor calibration documented. Welding documentation fully verified. Complete documentation list FAT plan and FAT report. P&ID diagram. Layout drawings. Material lists (metals and polymers). Material certificates 3.1. WPQR, WPS, welder qualifications. Welding protocols and isometrics. Calibration certificates for measuring equipment. Surface roughness measurement protocols. Leak test protocols. EU declarations of conformity for installed components. Operating documentation. Special features GMP-compliant, fully documented manufacturing. High-quality instrumentation. Very low, documented surface roughness values. Immediately available. Ideal for pharmaceutical, biotech, or contract manufacturers with high documentation requirements.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, Manufacturer BRINOX Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Year of Manufacture 2020 Condition New, in original packaging, unused. The system was only tested at the factory as part of the FAT. No commissioning, no production, and no media contact in operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid unit with fully integrated instrumentation, pump, and valve technology. Dimensions Approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/construction: 1.4301 Welded according to EN ISO 13920 Equipment – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Electromagnetic flow meter – Conductivity measurement – Pressure transmitter – Temperature measurement points – Pneumatic seat and diaphragm valves – Stainless steel frame construction – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, and wastewater Testing Complete FAT performed, including: – Layout verification – P&ID diagram verification – Maintenance and calibration accessibility check – Documentation check – Surface roughness test – Sensor calibration – Welding documentation check – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Ledpsyl H H Tsfx Aa Hori Complete welding documentation (WPS, WPQR, welder certificates, NDT certificates). CE-compliant construction. Scope of Delivery Complete pre-assembled process module including documentation. All FAT documentation, welding protocols, material certificates, and calibration certificates included.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 3 500 l, Výbava: dokumentácia / manuál, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Storage tank / process vessel Nominal volume: 3,500 litres Total volume: 4,082 litres Jacket volume: 226 litres Empty weight: approx. 1,760 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10°C to +150°C Fluid group: 2 Design according to AD 2000 code Pressure vessel in accordance with PED 2014/68/EU Category IV Ljdpfxjylnwye Aa Heri Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV acceptance including design review, final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully tested and released by the manufacturer. Tests carried out include: • Pressure test in accordance with PED • Design review by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing verification (as-built) • Review of material certificates • Calibration check of pressure gauges • Verification of markings • Documentation review in accordance with inspection checklist Complete FAT and TÜV reports available. DESIGN • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-end pharmaceutical finish • Manhole with round pressure closure • CIP piping system • J-pipe / internal piping • Sight glass DN80 • Multiple spare and process connections • Biocontrol flanges • Heavy-duty bearing supports / trunnion design • Lifting lugs • Nameplate with complete PED marking DOCUMENTATION – fully and systematically available • EU Declaration of Conformity • TÜV certificate with inspection report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and test pieces • Non-destructive test reports (RT, PT) • Dimensional check protocols • Calibration protocols for pressure gauges • Surface and manufacturing reports • Parts list • Detailed drawings (vessel, lid, CIP, J-pipe, etc.) • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never used in production • In storage • As new internal surface • No corrosion • No signs of use • Factory-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production facilities • Process and wastewater plants SPECIAL FEATURE High-quality BRINOX pharmaceutical fabrication with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – certified project quality with comprehensive GMP-compliant documentation.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 3 500 l, Výbava: dokumentácia / manuál, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As new Manufacturer: BRINOX d.o.o. Model: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial No.: 1003460 Year of manufacture: 2020 Condition: As new / unused Package 28 TECHNICAL DATA Product type: Batch tank / pressure vessel Working volume: 3,500 liters Total volume: 4,304 liters Jacket volume: 202 liters Empty weight: 1,958 kg Product-contact material: 1.4435 Jacket: 1.4404 CE marking: CE 0036 Permissible vessel pressure PS: -1 / +3 bar Test pressure vessel PT: 5.6 bar Permissible jacket pressure PS: -1 / +6 bar Test pressure jacket PT: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category III Module G – Single item inspection Notified body: TÜV SÜD Industrie Service GmbH (ID 0036) TÜV certification including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel underwent complete FAT inspection and approval at the factory. Tests performed included: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT as per test plan) • Dimensional and drawing conformity (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Manometer calibration check Ljdpfxsylng Ue Aa Hori • Marking inspection • Complete documentation review All FAT records are available. DESIGN FEATURES • Cylindrical, horizontal vessel • Double jacket with half-pipe coil • Internal surfaces electropolished and passivated • Mirror-polished product contact surface • Pharmaceutical-quality welding seams • DN 500 manway • DN 300 powder/charge port • CIP connections • Safety valve • Pressure and temperature ports • Agitator port • Heavy-duty trunnion mounting • Lifting lugs DOCUMENTATION – fully and systematically available Extensive project-specific quality and manufacturing documentation available, including: • EU declaration of conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design review and certification • 3.1 material certificates • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT, etc.) • Analysis certificates for welding materials and shielding gases • Company qualification certificate • Surface roughness protocol • Surface treatment report • Dimensional measurement report • Internal pressure test report • Calibration certificates • Reports and EU compliance of installed components • Compiled parts list • Component drawings • Operating and maintenance manuals Complete digital documentation package available. CONDITION • Never used in production • Warehouse stock • Internal surfaces absolutely as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processing • GMP production facilities • Biotechnological applications NOTES Premium BRINOX pharmaceutical build with full PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – verified project quality with comprehensive GMP-compliant documentation.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 1 500 l, Výbava: dokumentácia / manuál, BRINOX 1,500 L process vessel – 1.4435 – double jacket – PED Module G – TÜV – FAT – 2020 – As new Manufacturer: BRINOX d.o.o. Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of manufacture: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE marking: CE 0036 Condition: As new / unused Empty weight: 866 kg Ledpfx Ajykuhioa Hsri TECHNICAL DATA Product type: Main filling tank / process vessel Design: Cylindrical with dished ends Working volume: 1,500 litres Total volume: 1,785 litres Product-contact material: 1.4435 Jacket material: Stainless steel (double-jacketed) Max. allowable pressure (PS) vessel: -1 / +3 bar Test pressure (PT): 5.4 bar Max. allowable temperature (TS): -10 °C / +150 °C Pressure vessel in compliance with PED 2014/68/EU Module: G Fluid group: 1 SURFACES & FINISH Internal surface: High-gloss polished, pharmaceutical grade Product-contact areas in 1.4435 Weld seams finely ground Pharma-grade CIP-compatible execution EQUIPMENT • Double jacket for heating/cooling • Large manway with clamping locks • Multiple instrument and process nozzles • Pressure sensor / temperature connections • Bottom outlet • CIP / spray-ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stored as inventory • Interior absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – complete • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Pressure test report (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-volume BRINOX main filling vessel 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with full documentation, pharmaceutical finish and pressure tested to 5.4 bar. Project quality for sterile applications – immediately available.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 1 500 l, Výbava: dokumentácia / manuál, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Unit No.: BH6722-BH1001 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Product type: Main batch/process vessel Design: cylindrical with dished ends Working volume: 94 – 1,500 litres Empty weight: 866 kg Product-contact material: 1.4435 Jacket material: 1.4307 Insulation: available Design pressure vessel: -1 / +3 barg Permitted pressure (PS): -1 / +3 barg Test pressure (PT): 5.4 bar Permitted temperature (TS): -10 °C / +150 °C Pressure test date: 2020/04 Pressure vessel according to PED 2014/68/EU Category IV Assessment procedure: Module G Notified body: TÜV SÜD Industrie Service GmbH Design code: AD 2000 SURFACES & WELDS Internal surface: Electropolished and passivated Pharmaceutical grade External surface: Industrial ground finish NDT / Inspections: RT (Radiographic testing) PT (Dye penetrant testing) Pressure test 2020 documented EQUIPMENT • Double jacket for heating/cooling • Large front manway • Multiple process nozzles • CIP connections • Temperature and pressure ports • Safety fittings • Agitator mounting • FDA-compliant seals • Complete piping module CONDITION • Never used in production • Stock item • Internal surface absolutely as new • No corrosion • No signs of use • Immediately available Lodjykuc Topfx Aa Heri DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV certificates and acceptance reports • PED Module G documentation • Material certificates 3.1 (EN 10204) • Welding protocols • NDT reports (RT / PT) • Pressure test report 2020 • Surface protocols • Detailed and assembly drawings • FAT documents • Operating and maintenance manuals SPECIAL FEATURE BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, full TÜV acceptance in 2020 and complete technical documentation. Project quality for sterile applications – immediately available.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, číslo stroja/vozidla: BH6723-BH1001, kapacita nádrže: 1 000 l, Výbava: dokumentácia / manuál, BRINOX 1,000 L Pre-charging Tank – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMMBI-1000 Tag-No.: BH6723-BH1001 Serial No.: 1003454 Year of Manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-charging / process vessel Nominal volume: 1,000 L Total capacity: 1,400 L Empty weight: approx. 610–762 kg Product-contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design to AD 2000 Pressure vessel in accordance with PED 2014/68/EU Category IV Module G – Individual inspection Notified Body: TÜV SÜD ID No.: 0036 TÜV CERTIFICATION EU Certificate of Conformity (Module G) Certificate No.: Z-EU-SI-LJU-20-05-2702107-19125214 Test Report No.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection in accordance with PED Annex I No. 3.2 carried out Pressure test according to Annex I No. 3.2.2 carried out Acceptance without deviations Approved load cycle count: 10,000 cycles (1.3 bar) Acceptance date: 20.05.2020 FAT – Factory Acceptance Test Complete in-house FAT performed: • Pressure testing • Visual weld seam inspection • NDT examinations (RT/PT) • Dimensional check • Roughness measurement (≤ 0.8 µm) • Calibration test • Documentation review FAT fully documented. EXECUTION • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade weld finish • Manway DN 500 • CIP connection • Safety valve • Manometer • Multiple process and measuring nozzles • Pressure and vacuum operation CONDITION • Never used in production • Factory tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available DOCUMENTATION Complete structured documentation available, including: Lrjdpjykqmzsfx Aa Hji • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design assessment • FAT protocols • Material certificates EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Roughness protocols • Internal pressure test • Dimensional protocols • Calibration certificates • Parts list and drawings • Operation and maintenance manuals Digital documentation folder available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-quality BRINOX pharmaceutical design with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – certified project quality. Immediately available.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, číslo stroja/vozidla: BH6721-BH1001, kapacita nádrže: 1 000 l, Výbava: dokumentácia / manuál, BRINOX 1,000 L Pre-Charge Vessel – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag-No.: BH6721-BH1001 Serial No.: 1003453 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-charge vessel / process vessel Nominal volume: 1,000 liters Total volume: 1,400 liters Empty weight: 762 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Lodpfx Aaoykpqre Heri Fluid group: 1 Design to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Single-unit assessment Notified body: TÜV SÜD Industrie Service GmbH (identification number 0036) TÜV acceptance including final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully FAT-tested and released at the factory. Testing carried out incl.: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT per test plan) • Dimensional and drawing check (as-built) • Internal roughness measurement (Ra ≤ 0.8 µm) • Calibration of pressure gauges • Verification of marking • Complete documentation check FAT protocols are fully available. SPECIFICATION • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • High-gloss polished product contact surface • Pharmaceutical-compliant weld seams • Manway DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator connection (DN 200) • Multiple spare nozzles • Heavy-duty trunnion/bearing supports • Handling and lifting device DOCUMENTATION – complete and structured Comprehensive project-specific quality and manufacturing documentation available, including: • EU declaration of conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design inspection and certification • Material certificates 3.1 • Welder lists and weld procedure qualification records (WPQR/WPS) • Non-destructive testing reports (RT, PT etc.) • Analysis certificates for welding filler material and welding gas • Company qualification certificate • Roughness report • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates for pressure gauges • Reports and EU conformity of installed components • Bill of materials • Component drawings • Operating and maintenance manuals Complete digital documentation folder available. CONDITION • Never used in production • Stock item • Interior surface absolutely as new • No corrosion • No signs of use • Factory-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processing • GMP production facilities • Biotechnological applications SPECIAL FEATURES High-quality BRINOX pharmaceutical manufacturing with full PED Module G individual inspection by TÜV SÜD, CE 0036 marking and documented FAT testing. Not a standard tank – but a project-specific, tested quality vessel with comprehensive GMP-compliant documentation. Immediately available.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 30 000 l, Výbava: dokumentácia / manuál, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – incl. Saddle Support – 2020 – Like New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial No.: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / Solution Tank / Pharmaceutical Process Vessel Working volume: 30,000 liters Total volume: 33,213 liters Product-contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated, and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: • PED 2014/68/EU compliant • CE marking present • Pharmaceutical design according to GMP Pressure Data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test performed. FAT – Factory Acceptance Test Fully documented FAT conducted including: • Dimensional, visual, and identification checks • Weld seam inspection and NDT • Pressure test according to PED • Testing of all connections • Documentation and quality checks FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Internal surface pickled and passivated • Hygienic, GMP-compliant construction Connections include: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measurement, safety and process connections Mechanical design: • Original BRINOX stainless steel saddle support included • Heavy-duty construction • Lifting points for crane handling available CONDITION • Like-new condition • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Saddle supports are also in as-new condition and included in the scope of delivery. DOCUMENTATION – fully available (GMP compliant) Comprehensive manufacturer and project documentation including: • EU Declaration of Conformity and CE documentation • PED documents • Material certificates EN 10204 – 3.1 • Welding documentation (WPS / WPQR, welder lists) • NDT inspection reports • FAT protocol and pressure test report • Roughness and surface reports • Calibration certificates • Part drawings and parts lists • Operation and maintenance manuals Documentation fully available digitally. TRANSPORT AND PACKAGING • Professional export packaging available • Original industrial packaging • Crane handling no problem • Worldwide shipping possible SUITABLE FOR Ljdpfx Asykngfoa Hjri • Pharmaceutical industry • Biotechnology • WWAS, WFI and PW systems • Sterile process solutions • GMP production plants FEATURE Project surplus from an international pharma greenfield project with full FAT, PED compliance and GMP documentation. Large-volume BRINOX 30,000 L pharma process vessel in new equipment quality incl. saddle support – immediately available

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 9 000 l, Výbava: dokumentácia / manuál, BRINOX 9000 L GMP Wash and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture: 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Capacity: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application This tank was used in a pharmaceutical production facility. Suitable for manufacturing, storage and provision of process solutions in GMP environments. Design and Features Cylindrical stainless steel vessel in horizontal configuration End-face process connections Large manway with pressure-sealed cover Integrated CIP system with spray ball Highly polished internal surface Hygienic product-contact connections Multiple measuring and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel support feet included in scope of delivery Condition Visually and technically in very good condition. Internal surfaces mirror-polished and clean. No visible damage to shell or connections. Accessories and fittings included as shown in the photographic documentation. FAT and Documentation Status According to FAT documentation "IT-11.1 Inspection of Welding Documentation," the welding documentation was checked as part of the factory acceptance test (FAT 01, 23.10.2020). Among other aspects, the following were confirmed: Identification of welders and welding seam inspectors Welder qualifications according to EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Documented test welds Random visual inspections without defects Traceability in accordance with material certificates 3.1 The complete welding documentation is included in the Turn-Over Package. Documentation – fully available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration reports Surface finish and roughness tests Lrsdpfxoykkk Hj Aa Hji Leak test record Welding plan WPQR WPS Welder qualification certificates Borescope inspection report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital form. Special Features Fully documented GMP version with verified welding documentation and comprehensive quality package. Ideally suited for reinstallation in pharmaceutical production facilities or applications requiring validation.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 9 000 l, Výbava: dokumentácia / manuál, BRINOX 9,000 L Washing Solution Tank – 316L – Double Jacket – TÜV / PED – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6751-BH1001 Package 31 Year of Manufacture: 2020 Condition: As new / unused Technical Specifications Product type: Washing solution tank Nominal volume: approx. 9,000 liters Product-contacting material: 1.4404 (AISI 316L) Design: horizontal construction CE marking: available Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Double jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polished • Pharmaceutical-grade weld seams • Documented surface quality Features / Equipment • Heavy-duty custom fabrication in 316L stainless steel • Large manway with pressure-sealed closure • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange connections • Instrument connections (pressure, temperature, sensors) • Robust carrying and lifting lugs • Heavy-duty industrial design • External piping and process connections pre-installed • Excellent maintenance and inspection accessibility The images clearly show the high-quality workmanship, clean welding quality, and the mirror-polished, product-contacting inner surface. Condition • Never used in production • Stock item from project surplus • Absolutely clean interior • No corrosion • No signs of use • Factory-new condition • Immediately available Suitable for • Washing solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production plants • Sterile liquid processes Documentation – complete and well-structured Comprehensive, project-related quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and guarantee certificates • Reports and EU component certifications • Assembly records • Component drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design inspection and certification • Welder lists, welding procedure qualifications, sample works • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy verification • Roughness protocol Lrodpfx Asykkivea Hji • Surface treatment report • Operation and maintenance manuals (unit) • Operation and maintenance manuals (components) • FAT documents (Factory Acceptance Test) Complete documentation folder available in digital form. Special Feature This is not a standard vessel, but a high-quality custom-built project tank to genuine pharmaceutical standards, featuring certified pressure design, documented fabrication, and full PED compliance including TÜV approval. Heavy-duty construction, large fittings, and integrated CIP make this vessel ideal for demanding GMP applications.

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 3 200 l, Výbava: dokumentácia / manuál, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag No.: BH6762-BH1001 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product Type: ELUTION / Solution Tank Volume: 3,200 litres Material: 1.4404 (AISI 316L) CE Marking: present (CE 0036) Tank Pressure: Operating pressure: -1 / +3 bar Test pressure: according to TÜV approval Jacket Pressure (Heating/Cooling Jacket): Operating pressure: -1 / +6 bar Test pressure: according to TÜV approval Temperature range: -20°C to +150°C Pressure vessel according to PED 2014/68/EU Module G – individual inspection Acceptance by notified body (identification number 0036) FAT – Factory Acceptance Test The vessel was tested within a documented FAT. The tests included, among others: • Welding documentation check • Visual inspection of weld seams • Leak test • Pressure test • Surface roughness measurement • Sensor calibration test • Layout and dimensional check • Documentation check The FAT report including all test protocols is complete and available. SPECIFICATION • Double jacket for heating/cooling • Completely made of 316L stainless steel • Highly polished internal surface • Pharmaceutical-grade welds • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project specification • Lifting lugs for crane handling CONDITION • Never in productive use • Stock item from surplus project supply • Internally absolutely clean • No corrosion • No signs of use • As new industrial condition • Immediately available DOCUMENTATION – Complete and Structured Comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU declaration of conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design review and certification • Material certificates (3.1) • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive test reports (NDT) • Analysis certificates for welding consumables and shield gas • Roughness protocol • Surface treatment report • Dimensional accuracy inspection • Internal pressure test report • Calibration certificates • Assembly documentation • Part drawings • Operation and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media SPECIAL FEATURE This is not a standard tank, but a high-quality BRINOX project fabrication in genuine pharmaceutical quality, with certified pressure design, full PED conformity (Module G), documented FAT inspection, and comprehensive quality documentation. Project quality for sterile applications – immediately available. Lrjdpfx Asykkhroa Hoi

Stav: nový, Rok výroby: 2020, Funkcionalita: plne funkčný, kapacita nádrže: 3 200 l, Výbava: dokumentácia / manuál, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: As new / unused Technical Data Product Type: ELUTION / Solution Tank Capacity: 3,200 litres Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Tank Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20°C to +150°C Pressure vessel in accordance with PED 2014/68/EU Module G – Individual Assessment Notified Body: TÜV SÜD (Number 0036) Permissible Number of Load Cycles: 7,300 / 5,475 at Pressure Fluctuation 3.3 / 4.5 bar TÜV / PED / FAT • EU Certificate of Conformity according to 2014/68/EU • Certificate Number: Z-EU-SI-LJU-20-08-2350154-14124056 • Test report available • Pressure test with water successfully completed • Acceptance by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual inspection • Turn-Over-Package (TOP) fully included Complete Documentation Available The complete technical documentation package includes, among others: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Nameplate documentation • Assembly drawings • Component drawings • Welders lists and welding procedure approvals • Work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gases • Manufacturer’s qualification certificate • Non-destructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal pressure test report • Dimensional accuracy check • Roughness protocol • Surface treatment report • Operation and maintenance manuals (unit and components) Documentation covers project standards for pharmaceutical installations. Design • Double jacket for heating and cooling • Constructed entirely in stainless steel 316L (1.4404) • High-gloss polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manways / inspection openings • Clamp and flange fittings • Instrumentation prepared (pressure, temperature, sensors) • Heavy-duty project design • Lifting lugs for crane handling • PED-compliant pressure design Condition • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • As new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems Lrjdpfxeykkbxs Aa Hsi • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production plants • CIP media Special feature This is not a standard tank, but a high-quality BRINOX project build in true pharmaceutical quality with: • PED Module G individual inspection • TÜV SÜD acceptance • FAT performed • Full welding, material and testing documentation • Documented surface treatment • 316L design for sterile applications Project quality for demanding GMP applications – immediately available.